! Started logfile: J0017+8135_K_2006_10_20_yyk_uvs.log on Thu Dec  2 20:40:30 2010
obs J0017+8135_K_2006_10_20_yyk_uva.fits
! Reading UV FITS file: J0017+8135_K_2006_10_20_yyk_uva.fits
! AN table 1: 5640 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.854976 visibilities/baseline/integration-bin.
! Found source: J0017+8135
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.42136e+10        8e+06          1        8e+06
!  02        2  2.42266e+10        8e+06          1        8e+06
!  03        3  2.42656e+10        8e+06          1        8e+06
!  04        4  2.43436e+10        8e+06          1        8e+06
!  05        5  2.44866e+10        8e+06          1        8e+06
!  06        6  2.45906e+10        8e+06          1        8e+06
!  07        7  2.46556e+10        8e+06          1        8e+06
!  08        8  2.46816e+10        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 2240 lines of history.
! 
! Reading 1735944 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
![@muppet J0017+8135_K_2006_10_20_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 3
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=3
float phase_soltime2
phase_soltime2=0.3
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.70
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 10
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.0650x0.0650 milli-arcsec cellsize.
uvav time_av, true
! Averaging into 10 second bins.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.563024 Jy 
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.305 mas, bmaj=0.509 mas, bpa=-7.465 degrees
! Estimated noise=2.4972 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.284978 Jy
! Component: 100  -  total flux cleaned = 0.386497 Jy
! Total flux subtracted in 100 components = 0.386497 Jy
! Clean residual min=-0.016969 max=0.035464 Jy/beam
! Clean residual mean=0.000037 rms=0.004825 Jy/beam
! Combined flux in latest and established models = 0.386497 Jy
! Performing phase self-cal over 3 minute time intervals
! Adding 29 model components to the UV plane model.
! The established model now contains 29 components and 0.386497 Jy
! 
! Correcting IF 1.
!  A total of 134 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 115 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 134 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 163 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 144 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 144 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 321 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 160 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.418926Jy  sigma=1.335371
! Fit after  self-cal, rms=0.417528Jy  sigma=1.331155
! Inverting map and beam 
! Estimated beam: bmin=0.305 mas, bmaj=0.509 mas, bpa=-7.465 degrees
! Estimated noise=2.49729 mJy/beam.
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0536316 Jy
! Component: 100  -  total flux cleaned = 0.0826782 Jy
! Total flux subtracted in 100 components = 0.0826782 Jy
! Clean residual min=-0.015785 max=0.020040 Jy/beam
! Clean residual mean=0.000001 rms=0.004015 Jy/beam
! Combined flux in latest and established models = 0.469175 Jy
! Performing phase self-cal over 3 minute time intervals
! Adding 21 model components to the UV plane model.
! The established model now contains 41 components and 0.469175 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.410428Jy  sigma=1.278081
! Fit after  self-cal, rms=0.410351Jy  sigma=1.277741
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.4185 mas, bmaj=0.8054 mas, bpa=-3.204 degrees
! Estimated noise=1.02245 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.52, -0.585).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0251964 Jy
! Component: 100  -  total flux cleaned = 0.0337138 Jy
! Component: 150  -  total flux cleaned = 0.0372834 Jy
! Component: 200  -  total flux cleaned = 0.039713 Jy
! Total flux subtracted in 200 components = 0.039713 Jy
! Clean residual min=-0.011723 max=0.014213 Jy/beam
! Clean residual mean=0.000101 rms=0.003443 Jy/beam
! Combined flux in latest and established models = 0.508888 Jy
! Performing phase self-cal over 3 minute time intervals
! Adding 44 model components to the UV plane model.
! The established model now contains 73 components and 0.508888 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.408947Jy  sigma=1.268519
! Fit after  self-cal, rms=0.408771Jy  sigma=1.267980
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.4185 x 0.8054 at -3.204 degrees (North through East)
! Clean map  min=-0.011417  max=0.3517 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        0.87     HN        0.96     KP        0.90     
!   LA        0.95     MK        0.79     NL        1.19     OV        1.06     
!   PT        1.00     SC        3.85     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        0.88     HN        1.10     KP        0.90     
!   LA        0.95     MK        0.87     NL        1.25     OV        1.04     
!   PT        0.88     SC        2.60     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.94     HN        0.99     KP        0.88     
!   LA        0.94     MK        0.79     NL        1.08     OV        1.03     
!   PT        1.02     SC        3.57     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.90     FD        0.97     HN        0.99     KP        0.92     
!   LA        0.95     MK        0.94     NL        0.98     OV        0.86     
!   PT        1.21     SC        2.66     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.84     FD        0.91     HN        0.87     KP        0.99     
!   LA        0.99     MK        1.09     NL        1.05     OV        0.95     
!   PT        0.95     SC        2.87     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.87     FD        1.07     HN        0.70     KP        0.74     
!   LA        1.02     MK        1.49     NL        1.14     OV        1.15     
!   PT        1.05     SC        3.08     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.06     HN        0.75     KP        0.71     
!   LA        0.99     MK        1.02     NL        1.11     OV        1.45     
!   PT        1.14     SC        1.00*    
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.89     FD        1.08     HN        0.91     KP        0.78     
!   LA        0.98     MK        1.14     NL        1.08     OV        1.47     
!   PT        1.17     SC        2.73     
! 
! 
! Fit before self-cal, rms=0.408771Jy  sigma=1.267980
! Fit after  self-cal, rms=0.906059Jy  sigma=1.213698
selfcal false, false, phase_soltime
! Performing phase self-cal over 3 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.906059Jy  sigma=1.213698
! Fit after  self-cal, rms=0.906050Jy  sigma=1.213702
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.4151 mas, bmaj=0.8113 mas, bpa=-2.664 degrees
! Estimated noise=1.00185 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.0046332 Jy
! Component: 100  -  total flux cleaned = -0.00538527 Jy
! Component: 150  -  total flux cleaned = -0.00591374 Jy
! Component: 200  -  total flux cleaned = -0.00614904 Jy
! Total flux subtracted in 200 components = -0.00614904 Jy
! Clean residual min=-0.009523 max=0.009118 Jy/beam
! Clean residual mean=0.000048 rms=0.002701 Jy/beam
! Combined flux in latest and established models = 0.502739 Jy
! Performing phase self-cal over 3 minute time intervals
! Adding 17 model components to the UV plane model.
! The established model now contains 85 components and 0.502739 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.906050Jy  sigma=1.212983
! Fit after  self-cal, rms=0.905963Jy  sigma=1.213174
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.3 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.905963Jy  sigma=1.213174
! Fit after  self-cal, rms=0.893535Jy  sigma=1.058685
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0165894 Jy
! Component: 100  -  total flux cleaned = 0.0204874 Jy
! Component: 150  -  total flux cleaned = 0.0212452 Jy
! Component: 200  -  total flux cleaned = 0.021384 Jy
! Total flux subtracted in 200 components = 0.021384 Jy
! Clean residual min=-0.008572 max=0.006797 Jy/beam
! Clean residual mean=-0.000099 rms=0.002145 Jy/beam
! Combined flux in latest and established models = 0.524123 Jy
! Performing phase self-cal over 0.3 minute time intervals
! Adding 24 model components to the UV plane model.
! The established model now contains 97 components and 0.524123 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.893118Jy  sigma=1.054179
! Fit after  self-cal, rms=0.891030Jy  sigma=1.039644
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.4151 x 0.8113 at -2.664 degrees (North through East)
! Clean map  min=-0.0082317  max=0.36794 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
! Performing amp+phase self-cal over 3 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.891030Jy  sigma=1.039644
! Fit after  self-cal, rms=0.736086Jy  sigma=0.999894
! Performing phase self-cal over 0.3 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.736086Jy  sigma=0.999894
! Fit after  self-cal, rms=0.736244Jy  sigma=0.996595
! Inverting map and beam 
! Estimated beam: bmin=0.4059 mas, bmaj=0.7384 mas, bpa=-5.346 degrees
! Estimated noise=0.978827 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00234017 Jy
! Component: 100  -  total flux cleaned = -0.00278011 Jy
! Component: 150  -  total flux cleaned = -0.00301528 Jy
! Component: 200  -  total flux cleaned = -0.00301981 Jy
! Total flux subtracted in 200 components = -0.00301981 Jy
! Clean residual min=-0.003420 max=0.004279 Jy/beam
! Clean residual mean=-0.000034 rms=0.000982 Jy/beam
! Combined flux in latest and established models = 0.521103 Jy
! Performing phase self-cal over 0.3 minute time intervals
! Adding 23 model components to the UV plane model.
! The established model now contains 111 components and 0.521103 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.736245Jy  sigma=0.995780
! Fit after  self-cal, rms=0.736030Jy  sigma=0.994712
! Inverting map 
! Performing amp+phase self-cal over 1 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.736030Jy  sigma=0.994712
! Fit after  self-cal, rms=0.695516Jy  sigma=0.990058
! Performing phase self-cal over 0.3 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.695516Jy  sigma=0.990058
! Fit after  self-cal, rms=0.695806Jy  sigma=0.989501
! Inverting map and beam 
! Estimated beam: bmin=0.4048 mas, bmaj=0.7141 mas, bpa=-6.205 degrees
! Estimated noise=0.97594 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00027156 Jy
! Component: 100  -  total flux cleaned = -0.000497644 Jy
! Component: 150  -  total flux cleaned = -0.000588127 Jy
! Component: 200  -  total flux cleaned = -0.000662398 Jy
! Total flux subtracted in 200 components = -0.000662398 Jy
! Clean residual min=-0.003461 max=0.004002 Jy/beam
! Clean residual mean=-0.000029 rms=0.000937 Jy/beam
! Combined flux in latest and established models = 0.52044 Jy
! Performing phase self-cal over 0.3 minute time intervals
! Adding 23 model components to the UV plane model.
! The established model now contains 119 components and 0.520441 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.695808Jy  sigma=0.989066
! Fit after  self-cal, rms=0.695616Jy  sigma=0.988914
! Inverting map 
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 180 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9558 mas, bmaj=1.272 mas, bpa=-3.922 degrees
! Estimated noise=1.17815 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00030877 Jy
! Component: 100  -  total flux cleaned = 0.000552147 Jy
! Component: 150  -  total flux cleaned = 0.000551414 Jy
! Component: 200  -  total flux cleaned = 0.000550972 Jy
! Total flux subtracted in 200 components = 0.000550972 Jy
! Clean residual min=-0.003421 max=0.004703 Jy/beam
! Clean residual mean=-0.000054 rms=0.001125 Jy/beam
! Combined flux in latest and established models = 0.520992 Jy
! Performing phase self-cal over 0.3 minute time intervals
! Adding 16 model components to the UV plane model.
! The established model now contains 129 components and 0.520991 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.695630Jy  sigma=0.988840
! Fit after  self-cal, rms=0.695184Jy  sigma=0.988734
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.3058 mas, bmaj=0.4676 mas, bpa=-12.64 degrees
! Estimated noise=2.36778 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.297193 Jy
! Component: 100  -  total flux cleaned = 0.402323 Jy
! Component: 150  -  total flux cleaned = 0.454107 Jy
! Component: 200  -  total flux cleaned = 0.481965 Jy
! Total flux subtracted in 200 components = 0.481965 Jy
! Clean residual min=-0.012064 max=0.011578 Jy/beam
! Clean residual mean=0.000001 rms=0.002633 Jy/beam
! Combined flux in latest and established models = 0.481965 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 37 model components to the UV plane model.
! The established model now contains 37 components and 0.481965 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.4048 mas, bmaj=0.7141 mas, bpa=-6.205 degrees
! Estimated noise=0.97594 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0231792 Jy
! Component: 100  -  total flux cleaned = 0.033233 Jy
! Component: 150  -  total flux cleaned = 0.0362651 Jy
! Component: 200  -  total flux cleaned = 0.0374096 Jy
! Total flux subtracted in 200 components = 0.0374096 Jy
! Clean residual min=-0.003313 max=0.004310 Jy/beam
! Clean residual mean=-0.000026 rms=0.000992 Jy/beam
! Combined flux in latest and established models = 0.519375 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 73 components and 0.519375 Jy
! Inverting map 
! Added new window around map position (5.2, 5.655).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00465069 Jy
! Component: 100  -  total flux cleaned = 0.00585019 Jy
! Component: 150  -  total flux cleaned = 0.00637137 Jy
! Component: 200  -  total flux cleaned = 0.00665551 Jy
! Total flux subtracted in 200 components = 0.00665551 Jy
! Clean residual min=-0.003514 max=0.003518 Jy/beam
! Clean residual mean=-0.000029 rms=0.000924 Jy/beam
! Combined flux in latest and established models = 0.52603 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 89 components and 0.52603 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 180 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9558 mas, bmaj=1.272 mas, bpa=-3.922 degrees
! Estimated noise=1.17815 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00041002 Jy
! Component: 100  -  total flux cleaned = 0.000469383 Jy
! Component: 150  -  total flux cleaned = 0.000527263 Jy
! Component: 200  -  total flux cleaned = 0.000716781 Jy
! Total flux subtracted in 200 components = 0.000716781 Jy
! Clean residual min=-0.003165 max=0.003589 Jy/beam
! Clean residual mean=-0.000060 rms=0.001053 Jy/beam
! Combined flux in latest and established models = 0.526747 Jy
! Adding 15 model components to the UV plane model.
! The established model now contains 99 components and 0.526747 Jy
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.4048 mas, bmaj=0.7141 mas, bpa=-6.205 degrees
! Estimated noise=0.97594 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -4.38225e-05 Jy
! Component: 100  -  total flux cleaned = -4.13256e-05 Jy
! Component: 150  -  total flux cleaned = -4.07487e-05 Jy
! Component: 200  -  total flux cleaned = 3.06338e-05 Jy
! Total flux subtracted in 200 components = 3.06338e-05 Jy
! Clean residual min=-0.003233 max=0.003496 Jy/beam
! Clean residual mean=-0.000033 rms=0.000896 Jy/beam
! Combined flux in latest and established models = 0.526778 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.3 minute time intervals
! Adding 29 model components to the UV plane model.
! The established model now contains 108 components and 0.526778 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.695429Jy  sigma=0.988817
! Fit after  self-cal, rms=0.695016Jy  sigma=0.988467
wmodel J0017+8135_K_2006_10_20_yyk\_map.mod
! Writing 108 model components to file: J0017+8135_K_2006_10_20_yyk_map.mod
wobs J0017+8135_K_2006_10_20_yyk\_uvs.fits
! Writing UV FITS file: J0017+8135_K_2006_10_20_yyk_uvs.fits
wwins J0017+8135_K_2006_10_20_yyk\_map.win
! wwins: Wrote 3 windows to J0017+8135_K_2006_10_20_yyk_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000822353 Jy
! Component: 100  -  total flux cleaned = 0.00122523 Jy
! Component: 150  -  total flux cleaned = 0.00128291 Jy
! Component: 200  -  total flux cleaned = 0.00133746 Jy
! Component: 250  -  total flux cleaned = 0.00154292 Jy
! Component: 300  -  total flux cleaned = 0.00159223 Jy
! Component: 350  -  total flux cleaned = 0.0016404 Jy
! Component: 400  -  total flux cleaned = 0.00164008 Jy
! Component: 450  -  total flux cleaned = 0.00159355 Jy
! Component: 500  -  total flux cleaned = 0.00141005 Jy
! Component: 550  -  total flux cleaned = 0.00127529 Jy
! Component: 600  -  total flux cleaned = 0.00114219 Jy
! Component: 650  -  total flux cleaned = 0.00105398 Jy
! Component: 700  -  total flux cleaned = 0.000621604 Jy
! Component: 750  -  total flux cleaned = 0.000409919 Jy
! Component: 800  -  total flux cleaned = 0.000283698 Jy
! Component: 850  -  total flux cleaned = -8.90143e-05 Jy
! Component: 900  -  total flux cleaned = -0.000252319 Jy
! Component: 950  -  total flux cleaned = -0.000613884 Jy
! Component: 1000  -  total flux cleaned = -0.000731406 Jy
! Component: 1050  -  total flux cleaned = -0.000770731 Jy
! Component: 1100  -  total flux cleaned = -0.000964153 Jy
! Component: 1150  -  total flux cleaned = -0.00100157 Jy
! Component: 1200  -  total flux cleaned = -0.00107643 Jy
! Component: 1250  -  total flux cleaned = -0.000964146 Jy
! Component: 1300  -  total flux cleaned = -0.00107533 Jy
! Component: 1350  -  total flux cleaned = -0.00122015 Jy
! Component: 1400  -  total flux cleaned = -0.00100293 Jy
! Component: 1450  -  total flux cleaned = -0.00118158 Jy
! Component: 1500  -  total flux cleaned = -0.00128722 Jy
! Component: 1550  -  total flux cleaned = -0.00128662 Jy
! Component: 1600  -  total flux cleaned = -0.00135576 Jy
! Component: 1650  -  total flux cleaned = -0.00139013 Jy
! Component: 1700  -  total flux cleaned = -0.00152534 Jy
! Component: 1750  -  total flux cleaned = -0.00145826 Jy
! Component: 1800  -  total flux cleaned = -0.00142572 Jy
! Component: 1850  -  total flux cleaned = -0.00152493 Jy
! Component: 1900  -  total flux cleaned = -0.00155703 Jy
! Component: 1950  -  total flux cleaned = -0.00149235 Jy
! Component: 2000  -  total flux cleaned = -0.00155584 Jy
! Total flux subtracted in 2048 components = -0.00136507 Jy
! Clean residual min=-0.002106 max=0.001588 Jy/beam
! Clean residual mean=-0.000016 rms=0.000618 Jy/beam
! Combined flux in latest and established models = 0.525412 Jy
keep
! Adding 135 model components to the UV plane model.
! The established model now contains 243 components and 0.525412 Jy
![Exited script file: muppet]
wmap "J0017+8135_K_2006_10_20_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.4048 x 0.7141 at -6.205 degrees (North through East)
! Clean map  min=-0.0035948  max=0.34585 Jy/beam
! Writing clean map to FITS file: J0017+8135_K_2006_10_20_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.345847 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000618779 
device "J0017+8135_K_2006_10_20_yyk\_map.eps/VPS"
! Attempting to open device: 'J0017+8135_K_2006_10_20_yyk_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.536751 0.536751 1.0735 2.147 4.29401 8.58801 17.176 34.3521 68.7041
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0018 
print "peak=",int(peak_flux*1000)/1000
! peak= 0.345 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.4048 x 0.7141 at -6.205 degrees (North through East)
! Clean map  min=-0.0035948  max=0.34585 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J0017+8135_K_2006_10_20_yyk\_map.gif/gif"
! Attempting to open device: 'J0017+8135_K_2006_10_20_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J0017+8135_K_2006_10_20_yyk_uvs.log closed on Thu Dec  2 20:40:33 2010