! Started logfile: difmap.log_215 on Sun Dec 31 00:28:15 2017 ![@/tmp/difmap__4203.1] ! Obeying initialization file: /tmp/difmap__4203.1 ![@/home/lpetrov/config/difmap.cnf] device /XW ! Attempting to open device: '/XW' vflags="fb3" integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 800000 float soltime2 soltime2 = 15 float soltime3 soltime3 = 1 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float taper_size taper_size = 70. integer field_size field_size = 1024 float field_cell field_cell = 0.1 float old_peak float new_peak float flux_cutoff ![Exited script file: /home/lpetrov/config/difmap.cnf] ![@/tmp/difmap__4203.2] ![Exited script file: /tmp/difmap__4203.2] obs J0523-2955_X_a_uvm.fits ! Reading UV FITS file: J0523-2955_X_a_uvm.fits ! AN table 1: 18 integrations on 36 of 36 possible baselines. ! AN table 2: 18 integrations on 15 of 15 possible baselines. ! Apparent sampling: 0.98366 visibilities/baseline/integration-bin. ! Found source: J0523-2955 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 7.392e+09 3.2e+07 1 3.2e+07 ! 02 2 7.424e+09 3.2e+07 1 3.2e+07 ! 03 3 7.456e+09 3.2e+07 1 3.2e+07 ! 04 4 7.552e+09 3.2e+07 1 3.2e+07 ! 05 5 7.744e+09 3.2e+07 1 3.2e+07 ! 06 6 7.776e+09 3.2e+07 1 3.2e+07 ! 07 7 7.808e+09 3.2e+07 1 3.2e+07 ! 08 8 7.84e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 94 lines of history. ! ! Reading 7224 visibilities. ![Exited script file: /tmp/difmap__4203.1] sele I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 field_size=1024 field_cell=0.1 taper_size = 70. mapsize field_size,field_cell ! Map grid = 1024x1024 pixels with 0.100x0.100 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.004703Jy sigma=16.347536 ! Fit after self-cal, rms=0.944866Jy sigma=15.538736 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. radplot ! Using default options string "m1" ! Move the cursor into the plot window and press 'H' for help proj ! Using default options string "m3" ! Move the cursor into the plot window and press 'H' for help uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clrmod true,true clean 200, 0.02 ! Inverting map and beam ! Estimated beam: bmin=0.7219 mas, bmaj=1.935 mas, bpa=4.798 degrees ! Estimated noise=0.814634 mJy/beam. ! clean: niter=200 gain=0.02 cutoff=0 ! Component: 050 - total flux cleaned = 0.0302414 Jy ! Component: 100 - total flux cleaned = 0.041275 Jy ! Component: 150 - total flux cleaned = 0.0465521 Jy ! Component: 200 - total flux cleaned = 0.0499086 Jy ! Total flux subtracted in 200 components = 0.0499086 Jy ! Clean residual min=-0.002649 max=0.002842 Jy/beam ! Clean residual mean=0.000017 rms=0.000835 Jy/beam ! Combined flux in latest and established models = 0.0499086 Jy mapl map,true ! ! Move the cursor into the plot window and press 'H' for help ! Note that 2 components lie outside the plot. clrmod true,true ! clrmod: Cleared the established and tentative models. selfcal ! Performing phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.099378Jy sigma=1.042166 ! Fit after self-cal, rms=0.099378Jy sigma=1.042166 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean 800, 0.01 ! Inverting map and beam ! Estimated beam: bmin=0.7219 mas, bmaj=1.935 mas, bpa=4.798 degrees ! Estimated noise=0.814634 mJy/beam. ! clean: niter=800 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0187868 Jy ! Component: 100 - total flux cleaned = 0.0301529 Jy ! Component: 150 - total flux cleaned = 0.0370294 Jy ! Component: 200 - total flux cleaned = 0.0412041 Jy ! Component: 250 - total flux cleaned = 0.0440911 Jy ! Component: 300 - total flux cleaned = 0.046263 Jy ! Component: 350 - total flux cleaned = 0.0479007 Jy ! Component: 400 - total flux cleaned = 0.0491516 Jy ! Component: 450 - total flux cleaned = 0.0501641 Jy ! Component: 500 - total flux cleaned = 0.0510191 Jy ! Component: 550 - total flux cleaned = 0.0517462 Jy ! Component: 600 - total flux cleaned = 0.0523649 Jy ! Component: 650 - total flux cleaned = 0.0528923 Jy ! Component: 700 - total flux cleaned = 0.053344 Jy ! Component: 750 - total flux cleaned = 0.0537313 Jy ! Component: 800 - total flux cleaned = 0.0540641 Jy ! Total flux subtracted in 800 components = 0.0540641 Jy ! Clean residual min=-0.003308 max=0.003137 Jy/beam ! Clean residual mean=0.000012 rms=0.000848 Jy/beam ! Combined flux in latest and established models = 0.0540641 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. clean 1200, 0.01 ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.0540641 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9229 mas, bmaj=2.441 mas, bpa=1.747 degrees ! Estimated noise=0.510505 mJy/beam. ! clean: niter=1200 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000747147 Jy ! Component: 100 - total flux cleaned = -0.0012371 Jy ! Component: 150 - total flux cleaned = -0.0015799 Jy ! Component: 200 - total flux cleaned = -0.00182234 Jy ! Component: 250 - total flux cleaned = -0.00199692 Jy ! Component: 300 - total flux cleaned = -0.00212574 Jy ! Component: 350 - total flux cleaned = -0.0022215 Jy ! Component: 400 - total flux cleaned = -0.002293 Jy ! Component: 450 - total flux cleaned = -0.00231635 Jy ! Component: 500 - total flux cleaned = -0.00232496 Jy ! Component: 550 - total flux cleaned = -0.00232705 Jy ! Component: 600 - total flux cleaned = -0.00232704 Jy ! Component: 650 - total flux cleaned = -0.0023271 Jy ! Component: 700 - total flux cleaned = -0.00232908 Jy ! Component: 750 - total flux cleaned = -0.00232906 Jy ! Component: 800 - total flux cleaned = -0.00232914 Jy ! Component: 850 - total flux cleaned = -0.00232911 Jy ! Component: 900 - total flux cleaned = -0.00232911 Jy ! Component: 950 - total flux cleaned = -0.00232919 Jy ! Component: 1000 - total flux cleaned = -0.00232928 Jy ! Component: 1050 - total flux cleaned = -0.00232935 Jy ! Component: 1100 - total flux cleaned = -0.00232931 Jy ! Component: 1150 - total flux cleaned = -0.00232933 Jy ! Component: 1200 - total flux cleaned = -0.00232747 Jy ! Total flux subtracted in 1200 components = -0.00232747 Jy ! Clean residual min=-0.001462 max=0.002200 Jy/beam ! Clean residual mean=0.000004 rms=0.000490 Jy/beam ! Combined flux in latest and established models = 0.0517366 Jy mapcol grey ! Mapplot colormap: grey, contrast: 1 brightness: 0.5. mapl map,true ! ! Move the cursor into the plot window and press 'H' for help clrmod true,true ! clrmod: Cleared the established and tentative models. selfcal ! Performing phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.099378Jy sigma=1.042166 ! Fit after self-cal, rms=0.099378Jy sigma=1.042166 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean 800, 0.01 ! Inverting map and beam ! Estimated beam: bmin=0.7219 mas, bmaj=1.935 mas, bpa=4.798 degrees ! Estimated noise=0.814634 mJy/beam. ! clean: niter=800 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0187868 Jy ! Component: 100 - total flux cleaned = 0.0301529 Jy ! Component: 150 - total flux cleaned = 0.0370294 Jy ! Component: 200 - total flux cleaned = 0.0412041 Jy ! Component: 250 - total flux cleaned = 0.0440962 Jy ! Component: 300 - total flux cleaned = 0.0463436 Jy ! Component: 350 - total flux cleaned = 0.0481201 Jy ! Component: 400 - total flux cleaned = 0.0495401 Jy ! Component: 450 - total flux cleaned = 0.050721 Jy ! Component: 500 - total flux cleaned = 0.0517542 Jy ! Component: 550 - total flux cleaned = 0.0526646 Jy ! Component: 600 - total flux cleaned = 0.0534714 Jy ! Component: 650 - total flux cleaned = 0.0541902 Jy ! Component: 700 - total flux cleaned = 0.0548318 Jy ! Component: 750 - total flux cleaned = 0.055405 Jy ! Component: 800 - total flux cleaned = 0.0559181 Jy ! Total flux subtracted in 800 components = 0.0559181 Jy ! Clean residual min=-0.002883 max=0.003508 Jy/beam ! Clean residual mean=0.000012 rms=0.000801 Jy/beam ! Combined flux in latest and established models = 0.055918 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. clean 1200, 0.01 ! Adding 38 model components to the UV plane model. ! The established model now contains 38 components and 0.055918 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9229 mas, bmaj=2.441 mas, bpa=1.747 degrees ! Estimated noise=0.510505 mJy/beam. ! clean: niter=1200 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000739391 Jy ! Component: 100 - total flux cleaned = -0.00119738 Jy ! Component: 150 - total flux cleaned = -0.00152371 Jy ! Component: 200 - total flux cleaned = -0.00176668 Jy ! Component: 250 - total flux cleaned = -0.00195427 Jy ! Component: 300 - total flux cleaned = -0.00210536 Jy ! Component: 350 - total flux cleaned = -0.00219672 Jy ! Component: 400 - total flux cleaned = -0.00221501 Jy ! Component: 450 - total flux cleaned = -0.00222381 Jy ! Component: 500 - total flux cleaned = -0.00223227 Jy ! Component: 550 - total flux cleaned = -0.00224055 Jy ! Component: 600 - total flux cleaned = -0.00225242 Jy ! Component: 650 - total flux cleaned = -0.00225239 Jy ! Component: 700 - total flux cleaned = -0.00225239 Jy ! Component: 750 - total flux cleaned = -0.0022524 Jy ! Component: 800 - total flux cleaned = -0.00225243 Jy ! Component: 850 - total flux cleaned = -0.00225602 Jy ! Component: 900 - total flux cleaned = -0.00225606 Jy ! Component: 950 - total flux cleaned = -0.00225608 Jy ! Component: 1000 - total flux cleaned = -0.00225611 Jy ! Component: 1050 - total flux cleaned = -0.00225951 Jy ! Component: 1100 - total flux cleaned = -0.00225957 Jy ! Component: 1150 - total flux cleaned = -0.00225959 Jy ! Component: 1200 - total flux cleaned = -0.00226282 Jy ! Total flux subtracted in 1200 components = -0.00226282 Jy ! Clean residual min=-0.001337 max=0.001662 Jy/beam ! Clean residual mean=0.000003 rms=0.000423 Jy/beam ! Combined flux in latest and established models = 0.0536552 Jy mapcol grey ! Mapplot colormap: grey, contrast: 1 brightness: 0.5. mapl map,true ! ! Move the cursor into the plot window and press 'H' for help uvaver 16 ! Averaging into 16 second bins. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 proj ! Adding 56 model components to the UV plane model. ! The established model now contains 56 components and 0.0536552 Jy ! Using default options string "m3" ! Move the cursor into the plot window and press 'H' for help ! No telescopes found in sub-arrays beyond sub-array 2. ! No telescopes found in sub-arrays beyond sub-array 2. ! No telescopes found in sub-arrays beyond sub-array 2. ! Select box spans sub-plots - edit cancelled. ! Applying 109 buffered edits. ! Error occured in command: projplot ! proj ! Using default options string "m3" ! Move the cursor into the plot window and press 'H' for help uncalib selfcal ! Performing phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! A total of 1 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 1 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=0.032651Jy sigma=0.764476 ! Fit after self-cal, rms=0.031765Jy sigma=0.755495 selfcal true,true,1.e6 ! Performing amp+phase self-cal over 1e+06 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.031765Jy sigma=0.755495 ! Fit after self-cal, rms=0.027085Jy sigma=0.726193 clrmod true,true ! clrmod: Cleared the established and tentative models. selfcal ! Performing phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.055374Jy sigma=1.834619 ! Fit after self-cal, rms=0.055374Jy sigma=1.834619 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean 1200, 0.01 ! Inverting map and beam ! Estimated beam: bmin=0.727 mas, bmaj=1.965 mas, bpa=4.429 degrees ! Estimated noise=0.813557 mJy/beam. ! clean: niter=1200 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0182621 Jy ! Component: 100 - total flux cleaned = 0.0293108 Jy ! Component: 150 - total flux cleaned = 0.0359954 Jy ! Component: 200 - total flux cleaned = 0.0400409 Jy ! Component: 250 - total flux cleaned = 0.0427094 Jy ! Component: 300 - total flux cleaned = 0.0447044 Jy ! Component: 350 - total flux cleaned = 0.0462607 Jy ! Component: 400 - total flux cleaned = 0.0474877 Jy ! Component: 450 - total flux cleaned = 0.0484608 Jy ! Component: 500 - total flux cleaned = 0.049246 Jy ! Component: 550 - total flux cleaned = 0.0498944 Jy ! Component: 600 - total flux cleaned = 0.0504414 Jy ! Component: 650 - total flux cleaned = 0.0509084 Jy ! Component: 700 - total flux cleaned = 0.05131 Jy ! Component: 750 - total flux cleaned = 0.0516577 Jy ! Component: 800 - total flux cleaned = 0.0519599 Jy ! Component: 850 - total flux cleaned = 0.052223 Jy ! Component: 900 - total flux cleaned = 0.0524522 Jy ! Component: 950 - total flux cleaned = 0.0526446 Jy ! Component: 1000 - total flux cleaned = 0.0526885 Jy ! Component: 1050 - total flux cleaned = 0.0527025 Jy ! Component: 1100 - total flux cleaned = 0.052716 Jy ! Component: 1150 - total flux cleaned = 0.0527355 Jy ! Component: 1200 - total flux cleaned = 0.0527417 Jy ! Total flux subtracted in 1200 components = 0.0527417 Jy ! Clean residual min=-0.002086 max=0.002445 Jy/beam ! Clean residual mean=-0.000004 rms=0.000508 Jy/beam ! Combined flux in latest and established models = 0.0527417 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. clean 2000, 0.01 ! Adding 39 model components to the UV plane model. ! The established model now contains 39 components and 0.0527417 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9105 mas, bmaj=2.434 mas, bpa=1.789 degrees ! Estimated noise=0.516486 mJy/beam. ! clean: niter=2000 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000215213 Jy ! Component: 100 - total flux cleaned = 0.000360653 Jy ! Component: 150 - total flux cleaned = 0.000371913 Jy ! Component: 200 - total flux cleaned = 0.000377228 Jy ! Component: 250 - total flux cleaned = 0.000387018 Jy ! Component: 300 - total flux cleaned = 0.000391538 Jy ! Component: 350 - total flux cleaned = 0.000395877 Jy ! Component: 400 - total flux cleaned = 0.00040004 Jy ! Component: 450 - total flux cleaned = 0.000408086 Jy ! Component: 500 - total flux cleaned = 0.000411918 Jy ! Component: 550 - total flux cleaned = 0.000415628 Jy ! Component: 600 - total flux cleaned = 0.000422803 Jy ! Component: 650 - total flux cleaned = 0.000426162 Jy ! Component: 700 - total flux cleaned = 0.000429426 Jy ! Component: 750 - total flux cleaned = 0.000432632 Jy ! Component: 800 - total flux cleaned = 0.000438818 Jy ! Component: 850 - total flux cleaned = 0.000441798 Jy ! Component: 900 - total flux cleaned = 0.000444743 Jy ! Component: 950 - total flux cleaned = 0.000444775 Jy ! Component: 1000 - total flux cleaned = 0.000442027 Jy ! Component: 1050 - total flux cleaned = 0.000442068 Jy ! Component: 1100 - total flux cleaned = 0.000442053 Jy ! Component: 1150 - total flux cleaned = 0.000442077 Jy ! Component: 1200 - total flux cleaned = 0.000442115 Jy ! Component: 1250 - total flux cleaned = 0.000442133 Jy ! Component: 1300 - total flux cleaned = 0.000439683 Jy ! Component: 1350 - total flux cleaned = 0.0004397 Jy ! Component: 1400 - total flux cleaned = 0.000439724 Jy ! Component: 1450 - total flux cleaned = 0.000439666 Jy ! Component: 1500 - total flux cleaned = 0.000439688 Jy ! Component: 1550 - total flux cleaned = 0.000437432 Jy ! Component: 1600 - total flux cleaned = 0.000437441 Jy ! Component: 1650 - total flux cleaned = 0.000437454 Jy ! Component: 1700 - total flux cleaned = 0.000437469 Jy ! Component: 1750 - total flux cleaned = 0.000439589 Jy ! Component: 1800 - total flux cleaned = 0.000439552 Jy ! Component: 1850 - total flux cleaned = 0.000439504 Jy ! Component: 1900 - total flux cleaned = 0.000439501 Jy ! Component: 1950 - total flux cleaned = 0.000439507 Jy ! Component: 2000 - total flux cleaned = 0.000441463 Jy ! Total flux subtracted in 2000 components = 0.000441463 Jy ! Clean residual min=-0.001214 max=0.001192 Jy/beam ! Clean residual mean=0.000000 rms=0.000287 Jy/beam ! Combined flux in latest and established models = 0.0531831 Jy mapcol grey ! Mapplot colormap: grey, contrast: 1 brightness: 0.5. mapl map,true ! ! Move the cursor into the plot window and press 'H' for help uncalib selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 60 components and 0.0531832 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.027086Jy sigma=0.726356 ! Fit after self-cal, rms=0.027168Jy sigma=0.726014 selfcal true,true,10. ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.027168Jy sigma=0.726014 ! Fit after self-cal, rms=0.027527Jy sigma=0.725695 clrmod true,true ! clrmod: Cleared the established and tentative models. selfcal ! Performing phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.055754Jy sigma=1.834619 ! Fit after self-cal, rms=0.055754Jy sigma=1.834619 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean 1200, 0.01 ! Inverting map and beam ! Estimated beam: bmin=0.7273 mas, bmaj=1.965 mas, bpa=4.392 degrees ! Estimated noise=0.818759 mJy/beam. ! clean: niter=1200 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0183794 Jy ! Component: 100 - total flux cleaned = 0.0294991 Jy ! Component: 150 - total flux cleaned = 0.0362265 Jy ! Component: 200 - total flux cleaned = 0.040299 Jy ! Component: 250 - total flux cleaned = 0.0429941 Jy ! Component: 300 - total flux cleaned = 0.0449842 Jy ! Component: 350 - total flux cleaned = 0.0465152 Jy ! Component: 400 - total flux cleaned = 0.0477154 Jy ! Component: 450 - total flux cleaned = 0.0486579 Jy ! Component: 500 - total flux cleaned = 0.0494111 Jy ! Component: 550 - total flux cleaned = 0.0500314 Jy ! Component: 600 - total flux cleaned = 0.0505523 Jy ! Component: 650 - total flux cleaned = 0.0509953 Jy ! Component: 700 - total flux cleaned = 0.0513749 Jy ! Component: 750 - total flux cleaned = 0.0517028 Jy ! Component: 800 - total flux cleaned = 0.0519875 Jy ! Component: 850 - total flux cleaned = 0.0522353 Jy ! Component: 900 - total flux cleaned = 0.0523241 Jy ! Component: 950 - total flux cleaned = 0.0523736 Jy ! Component: 1000 - total flux cleaned = 0.0523893 Jy ! Component: 1050 - total flux cleaned = 0.0524044 Jy ! Component: 1100 - total flux cleaned = 0.052419 Jy ! Component: 1150 - total flux cleaned = 0.05244 Jy ! Component: 1200 - total flux cleaned = 0.0524467 Jy ! Total flux subtracted in 1200 components = 0.0524467 Jy ! Clean residual min=-0.002085 max=0.002405 Jy/beam ! Clean residual mean=-0.000004 rms=0.000518 Jy/beam ! Combined flux in latest and established models = 0.0524467 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. clean 2000, 0.01 ! Adding 34 model components to the UV plane model. ! The established model now contains 34 components and 0.0524467 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9125 mas, bmaj=2.44 mas, bpa=1.677 degrees ! Estimated noise=0.517818 mJy/beam. ! clean: niter=2000 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00021067 Jy ! Component: 100 - total flux cleaned = 0.000346995 Jy ! Component: 150 - total flux cleaned = 0.000379118 Jy ! Component: 200 - total flux cleaned = 0.000403068 Jy ! Component: 250 - total flux cleaned = 0.000412005 Jy ! Component: 300 - total flux cleaned = 0.000416285 Jy ! Component: 350 - total flux cleaned = 0.000424464 Jy ! Component: 400 - total flux cleaned = 0.000428393 Jy ! Component: 450 - total flux cleaned = 0.000435907 Jy ! Component: 500 - total flux cleaned = 0.000439518 Jy ! Component: 550 - total flux cleaned = 0.000443029 Jy ! Component: 600 - total flux cleaned = 0.000449673 Jy ! Component: 650 - total flux cleaned = 0.000455951 Jy ! Component: 700 - total flux cleaned = 0.000455962 Jy ! Component: 750 - total flux cleaned = 0.000458941 Jy ! Component: 800 - total flux cleaned = 0.000458913 Jy ! Component: 850 - total flux cleaned = 0.000458871 Jy ! Component: 900 - total flux cleaned = 0.000456159 Jy ! Component: 950 - total flux cleaned = 0.000456194 Jy ! Component: 1000 - total flux cleaned = 0.000453654 Jy ! Component: 1050 - total flux cleaned = 0.000453662 Jy ! Component: 1100 - total flux cleaned = 0.000453712 Jy ! Component: 1150 - total flux cleaned = 0.000451308 Jy ! Component: 1200 - total flux cleaned = 0.000451324 Jy ! Component: 1250 - total flux cleaned = 0.000449022 Jy ! Component: 1300 - total flux cleaned = 0.000449049 Jy ! Component: 1350 - total flux cleaned = 0.000449027 Jy ! Component: 1400 - total flux cleaned = 0.000449048 Jy ! Component: 1450 - total flux cleaned = 0.000446929 Jy ! Component: 1500 - total flux cleaned = 0.000448991 Jy ! Component: 1550 - total flux cleaned = 0.000448973 Jy ! Component: 1600 - total flux cleaned = 0.000448975 Jy ! Component: 1650 - total flux cleaned = 0.000448964 Jy ! Component: 1700 - total flux cleaned = 0.000448981 Jy ! Component: 1750 - total flux cleaned = 0.000450892 Jy ! Component: 1800 - total flux cleaned = 0.00045087 Jy ! Component: 1850 - total flux cleaned = 0.000452712 Jy ! Component: 1900 - total flux cleaned = 0.000452699 Jy ! Component: 1950 - total flux cleaned = 0.000452685 Jy ! Component: 2000 - total flux cleaned = 0.00045445 Jy ! Total flux subtracted in 2000 components = 0.00045445 Jy ! Clean residual min=-0.001220 max=0.001210 Jy/beam ! Clean residual mean=0.000000 rms=0.000285 Jy/beam ! Combined flux in latest and established models = 0.0529012 Jy mapcol grey ! Mapplot colormap: grey, contrast: 1 brightness: 0.5. mapl map,true ! ! Move the cursor into the plot window and press 'H' for help clrmod true,true ! clrmod: Cleared the established and tentative models. selfcal ! Performing phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.055754Jy sigma=1.834619 ! Fit after self-cal, rms=0.055754Jy sigma=1.834619 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean 1200, 0.01 ! Inverting map and beam ! Estimated beam: bmin=0.7273 mas, bmaj=1.965 mas, bpa=4.392 degrees ! Estimated noise=0.818759 mJy/beam. ! clean: niter=1200 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0183794 Jy ! Component: 100 - total flux cleaned = 0.0294991 Jy ! Component: 150 - total flux cleaned = 0.0362265 Jy ! Component: 200 - total flux cleaned = 0.040299 Jy ! Component: 250 - total flux cleaned = 0.0429941 Jy ! Component: 300 - total flux cleaned = 0.0449842 Jy ! Component: 350 - total flux cleaned = 0.0465152 Jy ! Component: 400 - total flux cleaned = 0.0477154 Jy ! Component: 450 - total flux cleaned = 0.0486579 Jy ! Component: 500 - total flux cleaned = 0.0494111 Jy ! Component: 550 - total flux cleaned = 0.0500314 Jy ! Component: 600 - total flux cleaned = 0.0505523 Jy ! Component: 650 - total flux cleaned = 0.0509953 Jy ! Component: 700 - total flux cleaned = 0.0513749 Jy ! Component: 750 - total flux cleaned = 0.0517028 Jy ! Component: 800 - total flux cleaned = 0.0519875 Jy ! Component: 850 - total flux cleaned = 0.0522353 Jy ! Component: 900 - total flux cleaned = 0.0524509 Jy ! Component: 950 - total flux cleaned = 0.052544 Jy ! Component: 1000 - total flux cleaned = 0.0526093 Jy ! Component: 1050 - total flux cleaned = 0.0526778 Jy ! Component: 1100 - total flux cleaned = 0.0527361 Jy ! Component: 1150 - total flux cleaned = 0.0527608 Jy ! Component: 1200 - total flux cleaned = 0.0527786 Jy ! Total flux subtracted in 1200 components = 0.0527786 Jy ! Clean residual min=-0.002115 max=0.002419 Jy/beam ! Clean residual mean=-0.000005 rms=0.000521 Jy/beam ! Combined flux in latest and established models = 0.0527786 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. clean 2000, 0.01 ! Adding 34 model components to the UV plane model. ! The established model now contains 34 components and 0.0527786 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9125 mas, bmaj=2.44 mas, bpa=1.677 degrees ! Estimated noise=0.517818 mJy/beam. ! clean: niter=2000 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 7.86396e-05 Jy ! Component: 100 - total flux cleaned = 0.000110237 Jy ! Component: 150 - total flux cleaned = 0.000134018 Jy ! Component: 200 - total flux cleaned = 0.000151563 Jy ! Component: 250 - total flux cleaned = 0.000163779 Jy ! Component: 300 - total flux cleaned = 0.000171601 Jy ! Component: 350 - total flux cleaned = 0.000179005 Jy ! Component: 400 - total flux cleaned = 0.00018948 Jy ! Component: 450 - total flux cleaned = 0.000196047 Jy ! Component: 500 - total flux cleaned = 0.000202323 Jy ! Component: 550 - total flux cleaned = 0.000205357 Jy ! Component: 600 - total flux cleaned = 0.000211254 Jy ! Component: 650 - total flux cleaned = 0.000216875 Jy ! Component: 700 - total flux cleaned = 0.000222272 Jy ! Component: 750 - total flux cleaned = 0.000224917 Jy ! Component: 800 - total flux cleaned = 0.000230014 Jy ! Component: 850 - total flux cleaned = 0.000234918 Jy ! Component: 900 - total flux cleaned = 0.000237305 Jy ! Component: 950 - total flux cleaned = 0.000241971 Jy ! Component: 1000 - total flux cleaned = 0.000244252 Jy ! Component: 1050 - total flux cleaned = 0.000244277 Jy ! Component: 1100 - total flux cleaned = 0.000246462 Jy ! Component: 1150 - total flux cleaned = 0.000246477 Jy ! Component: 1200 - total flux cleaned = 0.000248586 Jy ! Component: 1250 - total flux cleaned = 0.000248611 Jy ! Component: 1300 - total flux cleaned = 0.000250632 Jy ! Component: 1350 - total flux cleaned = 0.000250622 Jy ! Component: 1400 - total flux cleaned = 0.000250634 Jy ! Component: 1450 - total flux cleaned = 0.000250619 Jy ! Component: 1500 - total flux cleaned = 0.000250588 Jy ! Component: 1550 - total flux cleaned = 0.000250575 Jy ! Component: 1600 - total flux cleaned = 0.000250581 Jy ! Component: 1650 - total flux cleaned = 0.000250557 Jy ! Component: 1700 - total flux cleaned = 0.000250574 Jy ! Component: 1750 - total flux cleaned = 0.000250562 Jy ! Component: 1800 - total flux cleaned = 0.000250543 Jy ! Component: 1850 - total flux cleaned = 0.000248835 Jy ! Component: 1900 - total flux cleaned = 0.000250514 Jy ! Component: 1950 - total flux cleaned = 0.000250527 Jy ! Component: 2000 - total flux cleaned = 0.000252169 Jy ! Total flux subtracted in 2000 components = 0.000252169 Jy ! Clean residual min=-0.001204 max=0.001215 Jy/beam ! Clean residual mean=0.000000 rms=0.000286 Jy/beam ! Combined flux in latest and established models = 0.0530308 Jy mapcol grey ! Mapplot colormap: grey, contrast: 1 brightness: 0.5. mapl map,true ! ! Move the cursor into the plot window and press 'H' for help ! Note that 12 components lie outside the plot. clrmod true,true ! clrmod: Cleared the established and tentative models. selfcal ! Performing phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.055754Jy sigma=1.834619 ! Fit after self-cal, rms=0.055754Jy sigma=1.834619 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean 1200, 0.01 ! Inverting map and beam ! Estimated beam: bmin=0.7273 mas, bmaj=1.965 mas, bpa=4.392 degrees ! Estimated noise=0.818759 mJy/beam. ! clean: niter=1200 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0183794 Jy ! Component: 100 - total flux cleaned = 0.0294991 Jy ! Component: 150 - total flux cleaned = 0.0362265 Jy ! Component: 200 - total flux cleaned = 0.040299 Jy ! Component: 250 - total flux cleaned = 0.0429941 Jy ! Component: 300 - total flux cleaned = 0.0449842 Jy ! Component: 350 - total flux cleaned = 0.0465151 Jy ! Component: 400 - total flux cleaned = 0.0477155 Jy ! Component: 450 - total flux cleaned = 0.0486581 Jy ! Component: 500 - total flux cleaned = 0.0494074 Jy ! Component: 550 - total flux cleaned = 0.0500366 Jy ! Component: 600 - total flux cleaned = 0.0505701 Jy ! Component: 650 - total flux cleaned = 0.0510239 Jy ! Component: 700 - total flux cleaned = 0.0514106 Jy ! Component: 750 - total flux cleaned = 0.0517409 Jy ! Component: 800 - total flux cleaned = 0.0520238 Jy ! Component: 850 - total flux cleaned = 0.0522674 Jy ! Component: 900 - total flux cleaned = 0.0524774 Jy ! Component: 950 - total flux cleaned = 0.0526587 Jy ! Component: 1000 - total flux cleaned = 0.0528036 Jy ! Component: 1050 - total flux cleaned = 0.0528543 Jy ! Component: 1100 - total flux cleaned = 0.0529064 Jy ! Component: 1150 - total flux cleaned = 0.0529448 Jy ! Component: 1200 - total flux cleaned = 0.0529851 Jy ! Total flux subtracted in 1200 components = 0.0529851 Jy ! Clean residual min=-0.002061 max=0.002431 Jy/beam ! Clean residual mean=-0.000005 rms=0.000522 Jy/beam ! Combined flux in latest and established models = 0.052985 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. clean 2000, 0.01 ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.052985 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9125 mas, bmaj=2.44 mas, bpa=1.677 degrees ! Estimated noise=0.517818 mJy/beam. ! clean: niter=2000 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -6.80053e-05 Jy ! Component: 100 - total flux cleaned = -4.43629e-05 Jy ! Component: 150 - total flux cleaned = -3.35813e-05 Jy ! Component: 200 - total flux cleaned = -2.37719e-05 Jy ! Component: 250 - total flux cleaned = -1.48289e-05 Jy ! Component: 300 - total flux cleaned = -6.68456e-06 Jy ! Component: 350 - total flux cleaned = 7.58548e-07 Jy ! Component: 400 - total flux cleaned = 1.10341e-05 Jy ! Component: 450 - total flux cleaned = 2.075e-05 Jy ! Component: 500 - total flux cleaned = 2.69195e-05 Jy ! Component: 550 - total flux cleaned = 3.57161e-05 Jy ! Component: 600 - total flux cleaned = 3.85623e-05 Jy ! Component: 650 - total flux cleaned = 3.85428e-05 Jy ! Component: 700 - total flux cleaned = 3.85187e-05 Jy ! Component: 750 - total flux cleaned = 3.84517e-05 Jy ! Component: 800 - total flux cleaned = 3.59978e-05 Jy ! Component: 850 - total flux cleaned = 3.59856e-05 Jy ! Component: 900 - total flux cleaned = 3.59914e-05 Jy ! Component: 950 - total flux cleaned = 3.37727e-05 Jy ! Component: 1000 - total flux cleaned = 3.38063e-05 Jy ! Component: 1050 - total flux cleaned = 3.38106e-05 Jy ! Component: 1100 - total flux cleaned = 3.38031e-05 Jy ! Component: 1150 - total flux cleaned = 3.17918e-05 Jy ! Component: 1200 - total flux cleaned = 3.18091e-05 Jy ! Component: 1250 - total flux cleaned = 3.18087e-05 Jy ! Component: 1300 - total flux cleaned = 3.17883e-05 Jy ! Component: 1350 - total flux cleaned = 3.17765e-05 Jy ! Component: 1400 - total flux cleaned = 3.00075e-05 Jy ! Component: 1450 - total flux cleaned = 3.00089e-05 Jy ! Component: 1500 - total flux cleaned = 2.83415e-05 Jy ! Component: 1550 - total flux cleaned = 2.83613e-05 Jy ! Component: 1600 - total flux cleaned = 2.83354e-05 Jy ! Component: 1650 - total flux cleaned = 2.83335e-05 Jy ! Component: 1700 - total flux cleaned = 2.83034e-05 Jy ! Component: 1750 - total flux cleaned = 2.68469e-05 Jy ! Component: 1800 - total flux cleaned = 2.68386e-05 Jy ! Component: 1850 - total flux cleaned = 2.54724e-05 Jy ! Component: 1900 - total flux cleaned = 2.68076e-05 Jy ! Component: 1950 - total flux cleaned = 2.54932e-05 Jy ! Component: 2000 - total flux cleaned = 2.54888e-05 Jy ! Total flux subtracted in 2000 components = 2.54888e-05 Jy ! Clean residual min=-0.001211 max=0.001203 Jy/beam ! Clean residual mean=0.000000 rms=0.000287 Jy/beam ! Combined flux in latest and established models = 0.0530105 Jy mapcol grey ! Mapplot colormap: grey, contrast: 1 brightness: 0.5. mapl map,true ! ! Move the cursor into the plot window and press 'H' for help uncalib selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 47 components and 0.0530105 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.027534Jy sigma=0.725999 ! Fit after self-cal, rms=0.027545Jy sigma=0.725957 selfcal true,true,10. ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.027545Jy sigma=0.725957 ! Fit after self-cal, rms=0.027736Jy sigma=0.725840 levs=0.75,1.5,3.0,6.0,12,25.0,50.0 mapcol color ! Mapplot colormap: rainbow, contrast: 1 brightness: 0.5. mapl cln ! Inverting map and beam ! Estimated beam: bmin=0.9126 mas, bmaj=2.439 mas, bpa=1.762 degrees ! Estimated noise=0.518375 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9126 x 2.439 at 1.762 degrees (North through East) ! Clean map min=-0.0011841 max=0.04443 Jy/beam ! ! Move the cursor into the plot window and press 'H' for help mapcol grey ! Mapplot colormap: grey, contrast: 1 brightness: 0.5. camp ! Syntax error in line: ! camp ! ^ ! Unable to identify keyword "camp" ! x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (512),0.01 ! Inverting map ! clean: niter=512 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000149633 Jy ! Component: 100 - total flux cleaned = -0.000150407 Jy ! Component: 150 - total flux cleaned = -0.000115917 Jy ! Component: 200 - total flux cleaned = -5.01027e-05 Jy ! Component: 250 - total flux cleaned = 4.19289e-05 Jy ! Component: 300 - total flux cleaned = 0.000187686 Jy ! Component: 350 - total flux cleaned = 0.000285941 Jy ! Component: 400 - total flux cleaned = 0.000313084 Jy ! Component: 450 - total flux cleaned = 0.000326428 Jy ! Component: 500 - total flux cleaned = 0.000376617 Jy ! Total flux subtracted in 512 components = 0.000388924 Jy ! Clean residual min=-0.000623 max=0.000640 Jy/beam ! Clean residual mean=0.000001 rms=0.000205 Jy/beam ! Combined flux in latest and established models = 0.0533995 Jy levs=1.563,3.125,6.25,12.5,25.0,50.0 mapcol color ! Mapplot colormap: rainbow, contrast: 1 brightness: 0.5. mapl cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9126 x 2.439 at 1.762 degrees (North through East) ! Clean map min=-0.00062141 max=0.044442 Jy/beam ! Clean map min=-0.0010721 max=0.044442 Jy/beam ! ! Move the cursor into the plot window and press 'H' for help mapcol grey ! Mapplot colormap: grey, contrast: 1 brightness: 0.5. save J0523-2955_X_a ! Writing UV FITS file: J0523-2955_X_a.uvf ! Writing 83 model components to file: J0523-2955_X_a.mod ! wwins: Wrote 5 windows to J0523-2955_X_a.win ! Adding 36 model components to the UV plane model. ! The established model now contains 83 components and 0.0533994 Jy ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9126 x 2.439 at 1.762 degrees (North through East) ! Clean map min=-0.0010758 max=0.044443 Jy/beam ! Writing clean map to FITS file: J0523-2955_X_a.fits ! Writing difmap environment to: J0523-2955_X_a.par quit ! Quitting program ! Log file difmap.log_215 closed on Sun Dec 31 00:29:40 2017