! Started logfile: /vlbi/vcs9/uvm//J2354-1513_X_b_dfm.log on Tue Dec 26 23:18:12 2017 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 7.39200 obs /vlbi/vcs9/uvm//J2354-1513_X_b_uvm.fits ! Reading UV FITS file: /vlbi/vcs9/uvm//J2354-1513_X_b_uvm.fits ! AN table 1: 41 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.897213 visibilities/baseline/integration-bin. ! Found source: J2354-1513 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 7.392e+09 3.2e+07 1 3.2e+07 ! 02 2 7.424e+09 3.2e+07 1 3.2e+07 ! 03 3 7.456e+09 3.2e+07 1 3.2e+07 ! 04 4 7.552e+09 3.2e+07 1 3.2e+07 ! 05 5 7.744e+09 3.2e+07 1 3.2e+07 ! 06 6 7.776e+09 3.2e+07 1 3.2e+07 ! 07 7 7.808e+09 3.2e+07 1 3.2e+07 ! 08 8 7.84e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 94 lines of history. ! ! Reading 8240 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 8 channels. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_02.dfm J2354-1513_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 60 float amp_soltime2 amp_soltime2 = 5 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.1 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_02.dvm version of 2017.12.26 === " ! === Difmap script: pima_mupet_02.dvm version of 2017.12.26 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.547186 Jy startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.160098Jy sigma=26.887777 ! Fit after self-cal, rms=0.474275Jy sigma=11.312594 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. peakwin win_mult ! Inverting map and beam ! Estimated beam: bmin=0.9436 mas, bmaj=3.915 mas, bpa=-11.44 degrees ! Estimated noise=0.637155 mJy/beam. ! Added new window around map position (0, 0). flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.446903 Jy ! Component: 100 - total flux cleaned = 0.511187 Jy ! Total flux subtracted in 100 components = 0.511187 Jy ! Clean residual min=-0.014692 max=0.017581 Jy/beam ! Clean residual mean=-0.000040 rms=0.004480 Jy/beam ! Combined flux in latest and established models = 0.511187 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.511187 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.106075Jy sigma=1.748482 ! Fit after self-cal, rms=0.106073Jy sigma=1.748372 ! Inverting map print "============== Finished uniform weighting CLEAN ==============" ! ============== Finished uniform weighting CLEAN ============== ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.214 mas, bmaj=3.845 mas, bpa=-9.604 degrees ! Estimated noise=0.335128 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0344767 Jy ! Component: 100 - total flux cleaned = 0.0507048 Jy ! Component: 150 - total flux cleaned = 0.0591075 Jy ! Component: 200 - total flux cleaned = 0.0637705 Jy ! Total flux subtracted in 200 components = 0.0637705 Jy ! Clean residual min=-0.010735 max=0.008655 Jy/beam ! Clean residual mean=-0.000021 rms=0.002510 Jy/beam ! Combined flux in latest and established models = 0.574958 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 45 model components to the UV plane model. ! The established model now contains 51 components and 0.574958 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.091493Jy sigma=1.481113 ! Fit after self-cal, rms=0.091482Jy sigma=1.480712 ! Inverting map print "============== Finished natural weighting CLEAN ==============" ! ============== Finished natural weighting CLEAN ============== ! gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.01544 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 KP 0.99 LA 1.01 ! MK 0.98 NL 0.91 OV 1.00 PT 0.99 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.01653 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.01 KP 0.99 LA 1.01 ! MK 0.99 NL 0.91 OV 1.01 PT 0.98 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.01411 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 KP 0.99 LA 1.01 ! MK 0.99 NL 0.92 OV 1.00 PT 0.98 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.00787 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 KP 1.00 LA 1.01 ! MK 1.00 NL 0.93 OV 1.00 PT 0.99 ! ! ! Correcting IF 5. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.998084 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.02 KP 1.00 LA 1.01 ! MK 1.03 NL 0.94 OV 1.01 PT 0.99 ! ! ! Correcting IF 6. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.992357 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.02 KP 1.01 LA 1.02 ! MK 1.02 NL 0.97 OV 1.02 PT 1.00 ! ! ! Correcting IF 7. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.991009 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.03 KP 1.00 LA 1.02 ! MK 1.03 NL 0.98 OV 1.02 PT 1.00 ! ! ! Correcting IF 8. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.993779 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.03 KP 1.00 LA 1.01 ! MK 1.03 NL 0.97 OV 1.01 PT 0.99 ! ! ! Fit before self-cal, rms=0.091482Jy sigma=1.480712 ! Fit after self-cal, rms=0.082412Jy sigma=1.448922 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.082412Jy sigma=1.448922 ! Fit after self-cal, rms=0.082411Jy sigma=1.448919 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.22 mas, bmaj=3.873 mas, bpa=-9.474 degrees ! Estimated noise=0.337743 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00335121 Jy ! Component: 100 - total flux cleaned = 0.00352992 Jy ! Component: 150 - total flux cleaned = 0.00348736 Jy ! Component: 200 - total flux cleaned = 0.00337958 Jy ! Total flux subtracted in 200 components = 0.00337958 Jy ! Clean residual min=-0.010618 max=0.010518 Jy/beam ! Clean residual mean=-0.000022 rms=0.002447 Jy/beam ! Combined flux in latest and established models = 0.578337 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 66 components and 0.578338 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.081734Jy sigma=1.444480 ! Fit after self-cal, rms=0.081733Jy sigma=1.444409 ! Inverting map print "============== Finished amplitude gscale SELF-CAL ==============" ! ============== Finished amplitude gscale SELF-CAL ============== ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.081733Jy sigma=1.444409 ! Fit after self-cal, rms=0.081732Jy sigma=1.444397 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000216673 Jy ! Component: 100 - total flux cleaned = -0.000279562 Jy ! Component: 150 - total flux cleaned = -0.00033915 Jy ! Component: 200 - total flux cleaned = -0.000367358 Jy ! Total flux subtracted in 200 components = -0.000367358 Jy ! Clean residual min=-0.010644 max=0.010505 Jy/beam ! Clean residual mean=-0.000022 rms=0.002445 Jy/beam ! Combined flux in latest and established models = 0.57797 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 72 components and 0.57797 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.081688Jy sigma=1.443910 ! Fit after self-cal, rms=0.081688Jy sigma=1.443883 ! Inverting map print "=== Finished natural weighting clean with shorter phase_soltime " ! === Finished natural weighting clean with shorter phase_soltime ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.22 x 3.873 at -9.474 degrees (North through East) ! Clean map min=-0.010313 max=0.5236 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "============== Finished amplitude self-cal ==============" end if ! Performing amp+phase self-cal over 60 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.081688Jy sigma=1.443883 ! Fit after self-cal, rms=0.034772Jy sigma=0.703336 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.034772Jy sigma=0.703336 ! Fit after self-cal, rms=0.034771Jy sigma=0.703323 ! Inverting map and beam ! Estimated beam: bmin=1.219 mas, bmaj=3.892 mas, bpa=-9.501 degrees ! Estimated noise=0.335881 mJy/beam. ! Added new window around map position (-2.6, 7.2). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00656793 Jy ! Component: 100 - total flux cleaned = 0.00822779 Jy ! Component: 150 - total flux cleaned = 0.00916578 Jy ! Component: 200 - total flux cleaned = 0.00962696 Jy ! Total flux subtracted in 200 components = 0.00962696 Jy ! Clean residual min=-0.001662 max=0.002094 Jy/beam ! Clean residual mean=0.000000 rms=0.000508 Jy/beam ! Combined flux in latest and established models = 0.587597 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 35 model components to the UV plane model. ! The established model now contains 105 components and 0.587597 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.033923Jy sigma=0.678890 ! Fit after self-cal, rms=0.033912Jy sigma=0.678430 ! Inverting map ! ============== Finished amplitude self-cal ============== print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9433 mas, bmaj=3.926 mas, bpa=-11.33 degrees ! Estimated noise=0.546339 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.443854 Jy ! Component: 100 - total flux cleaned = 0.507916 Jy ! Component: 150 - total flux cleaned = 0.533882 Jy ! Component: 200 - total flux cleaned = 0.548988 Jy ! Total flux subtracted in 200 components = 0.548988 Jy ! Clean residual min=-0.005011 max=0.006492 Jy/beam ! Clean residual mean=-0.000012 rms=0.001271 Jy/beam ! Combined flux in latest and established models = 0.548988 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.548988 Jy ! Inverting map and beam ! Estimated beam: bmin=1.219 mas, bmaj=3.892 mas, bpa=-9.501 degrees ! Estimated noise=0.335881 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0145272 Jy ! Component: 100 - total flux cleaned = 0.0229212 Jy ! Component: 150 - total flux cleaned = 0.0281541 Jy ! Component: 200 - total flux cleaned = 0.0316265 Jy ! Total flux subtracted in 200 components = 0.0316265 Jy ! Clean residual min=-0.001673 max=0.002224 Jy/beam ! Clean residual mean=-0.000005 rms=0.000580 Jy/beam ! Combined flux in latest and established models = 0.580615 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 67 components and 0.580615 Jy ! Inverting map clean ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00247647 Jy ! Component: 100 - total flux cleaned = 0.00429903 Jy ! Component: 150 - total flux cleaned = 0.00567057 Jy ! Component: 200 - total flux cleaned = 0.00663839 Jy ! Total flux subtracted in 200 components = 0.00663839 Jy ! Clean residual min=-0.001374 max=0.001626 Jy/beam ! Clean residual mean=-0.000001 rms=0.000422 Jy/beam ! Combined flux in latest and established models = 0.587253 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 38 model components to the UV plane model. ! The established model now contains 85 components and 0.587253 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.033812Jy sigma=0.675925 ! Fit after self-cal, rms=0.033811Jy sigma=0.675850 wmodel J2354-1513_X_map.mod ! Writing 85 model components to file: J2354-1513_X_map.mod wobs J2354-1513_X_uvs.fits ! Writing UV FITS file: J2354-1513_X_uvs.fits wwins J2354-1513_X_map.win ! wwins: Wrote 2 windows to J2354-1513_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000690082 Jy ! Component: 100 - total flux cleaned = 0.00103944 Jy ! Component: 150 - total flux cleaned = 0.00133486 Jy ! Component: 200 - total flux cleaned = 0.00156426 Jy ! Component: 250 - total flux cleaned = 0.00169955 Jy ! Component: 300 - total flux cleaned = 0.00180926 Jy ! Component: 350 - total flux cleaned = 0.00191253 Jy ! Component: 400 - total flux cleaned = 0.001978 Jy ! Component: 450 - total flux cleaned = 0.00204066 Jy ! Component: 500 - total flux cleaned = 0.00208537 Jy ! Component: 550 - total flux cleaned = 0.00208568 Jy ! Component: 600 - total flux cleaned = 0.00211322 Jy ! Component: 650 - total flux cleaned = 0.0021263 Jy ! Component: 700 - total flux cleaned = 0.00215158 Jy ! Component: 750 - total flux cleaned = 0.00220012 Jy ! Component: 800 - total flux cleaned = 0.00225869 Jy ! Component: 850 - total flux cleaned = 0.00229288 Jy ! Component: 900 - total flux cleaned = 0.00235893 Jy ! Component: 950 - total flux cleaned = 0.00239098 Jy ! Component: 1000 - total flux cleaned = 0.00244289 Jy ! Component: 1050 - total flux cleaned = 0.00245275 Jy ! Component: 1100 - total flux cleaned = 0.00248217 Jy ! Component: 1150 - total flux cleaned = 0.00247269 Jy ! Component: 1200 - total flux cleaned = 0.00247284 Jy ! Component: 1250 - total flux cleaned = 0.00246364 Jy ! Component: 1300 - total flux cleaned = 0.00247262 Jy ! Component: 1350 - total flux cleaned = 0.00247249 Jy ! Component: 1400 - total flux cleaned = 0.00247227 Jy ! Component: 1450 - total flux cleaned = 0.00245521 Jy ! Component: 1500 - total flux cleaned = 0.0024303 Jy ! Component: 1550 - total flux cleaned = 0.0024466 Jy ! Component: 1600 - total flux cleaned = 0.00239848 Jy ! Component: 1650 - total flux cleaned = 0.00239078 Jy ! Component: 1700 - total flux cleaned = 0.00238296 Jy ! Component: 1750 - total flux cleaned = 0.00236014 Jy ! Component: 1800 - total flux cleaned = 0.00237516 Jy ! Component: 1850 - total flux cleaned = 0.00235305 Jy ! Component: 1900 - total flux cleaned = 0.00236038 Jy ! Component: 1950 - total flux cleaned = 0.00234615 Jy ! Component: 2000 - total flux cleaned = 0.00232508 Jy ! Component: 2050 - total flux cleaned = 0.00231824 Jy ! Component: 2100 - total flux cleaned = 0.00229099 Jy ! Component: 2150 - total flux cleaned = 0.00229114 Jy ! Component: 2200 - total flux cleaned = 0.00228443 Jy ! Component: 2250 - total flux cleaned = 0.00226472 Jy ! Component: 2300 - total flux cleaned = 0.00225174 Jy ! Component: 2350 - total flux cleaned = 0.00223897 Jy ! Component: 2400 - total flux cleaned = 0.00222001 Jy ! Component: 2450 - total flux cleaned = 0.00221379 Jy ! Component: 2500 - total flux cleaned = 0.00222621 Jy ! Component: 2550 - total flux cleaned = 0.00223231 Jy ! Component: 2600 - total flux cleaned = 0.00222626 Jy ! Component: 2650 - total flux cleaned = 0.00223822 Jy ! Component: 2700 - total flux cleaned = 0.00223833 Jy ! Component: 2750 - total flux cleaned = 0.00223255 Jy ! Component: 2800 - total flux cleaned = 0.0022384 Jy ! Component: 2850 - total flux cleaned = 0.00224981 Jy ! Component: 2900 - total flux cleaned = 0.00225543 Jy ! Component: 2950 - total flux cleaned = 0.00225539 Jy ! Component: 3000 - total flux cleaned = 0.00224982 Jy ! Component: 3050 - total flux cleaned = 0.00224437 Jy ! Component: 3100 - total flux cleaned = 0.00224986 Jy ! Component: 3150 - total flux cleaned = 0.00223896 Jy ! Component: 3200 - total flux cleaned = 0.00222814 Jy ! Component: 3250 - total flux cleaned = 0.00222815 Jy ! Component: 3300 - total flux cleaned = 0.00222275 Jy ! Component: 3350 - total flux cleaned = 0.00220143 Jy ! Component: 3400 - total flux cleaned = 0.00218558 Jy ! Component: 3450 - total flux cleaned = 0.00217508 Jy ! Component: 3500 - total flux cleaned = 0.00215416 Jy ! Component: 3550 - total flux cleaned = 0.002149 Jy ! Component: 3600 - total flux cleaned = 0.00214381 Jy ! Component: 3650 - total flux cleaned = 0.00213352 Jy ! Component: 3700 - total flux cleaned = 0.00211815 Jy ! Component: 3750 - total flux cleaned = 0.00210793 Jy ! Component: 3800 - total flux cleaned = 0.00209268 Jy ! Component: 3850 - total flux cleaned = 0.00208762 Jy ! Component: 3900 - total flux cleaned = 0.00207754 Jy ! Component: 3950 - total flux cleaned = 0.00207251 Jy ! Component: 4000 - total flux cleaned = 0.00204754 Jy ! Component: 4050 - total flux cleaned = 0.00204257 Jy ! Total flux subtracted in 4096 components = 0.00203762 Jy ! Clean residual min=-0.000299 max=0.000288 Jy/beam ! Clean residual mean=0.000001 rms=0.000088 Jy/beam ! Combined flux in latest and established models = 0.589291 Jy keep ! Adding 297 model components to the UV plane model. ! The established model now contains 382 components and 0.589291 Jy ![Exited script file: /opt64/bin/pima_mupet_02.dfm] wmap /vlbi/vcs9/uvm//J2354-1513_X_b_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.219 x 3.892 at -9.501 degrees (North through East) ! Clean map min=-0.00062809 max=0.52296 Jy/beam ! Writing clean map to FITS file: /vlbi/vcs9/uvm//J2354-1513_X_b_map.fits wmodel /vlbi/vcs9/uvm//J2354-1513_X_b_map.mod ! Writing 382 model components to file: /vlbi/vcs9/uvm//J2354-1513_X_b_map.mod wobs /vlbi/vcs9/uvm//J2354-1513_X_b_uvs.fits ! Writing UV FITS file: /vlbi/vcs9/uvm//J2354-1513_X_b_uvs.fits wwins /vlbi/vcs9/uvm//J2354-1513_X_b_map.win ! wwins: Wrote 3 windows to /vlbi/vcs9/uvm//J2354-1513_X_b_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.522965 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 8.48968e-05 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0487013 0.0487013 0.0974025 0.194805 0.38961 0.77922 1.55844 3.11688 6.23376 12.4675 24.935 49.8701 99.7402 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0002 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.522 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 6160 quit ! Quitting program ! Log file /vlbi/vcs9/uvm//J2354-1513_X_b_dfm.log closed on Tue Dec 26 23:18:15 2017