! Started logfile: /vlbi/vcs9/uvm//J2348-1631_C_a_dfm.log on Tue Dec 26 23:17:06 2017
float field_size
field_size =  1024
float field_cell
field_cell =   0.3000
float taper_size
taper_size =   40.0
float freq
freq       =    4.12800
obs     /vlbi/vcs9/uvm//J2348-1631_C_a_uvm.fits
! Reading UV FITS file: /vlbi/vcs9/uvm//J2348-1631_C_a_uvm.fits
! AN table 1: 68 integrations on 36 of 36 possible baselines.
! AN table 2: 20 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.887301 visibilities/baseline/integration-bin.
! Found source: J2348-1631
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 94 lines of history.
! 
! Reading 21352 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/opt64/bin/pima_mupet_02.dfm J2348-1631_C]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 60
float amp_soltime2
amp_soltime2 = 5
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.1
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_02.dvm version of 2017.12.26 === "
! === Difmap script: pima_mupet_02.dvm version of 2017.12.26 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 1.4597 Jy 
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 71 telescope corrections were flagged in sub-array 1.
!  A total of 14 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 71 telescope corrections were flagged in sub-array 1.
!  A total of 14 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 71 telescope corrections were flagged in sub-array 1.
!  A total of 14 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 71 telescope corrections were flagged in sub-array 1.
!  A total of 14 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 5.
!  A total of 71 telescope corrections were flagged in sub-array 1.
!  A total of 14 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 6.
!  A total of 71 telescope corrections were flagged in sub-array 1.
!  A total of 14 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 7.
!  A total of 71 telescope corrections were flagged in sub-array 1.
!  A total of 14 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 8.
!  A total of 71 telescope corrections were flagged in sub-array 1.
!  A total of 14 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.755281Jy  sigma=44.406987
! Fit after  self-cal, rms=0.729711Jy  sigma=17.331879
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
peakwin win_mult
! Inverting map and beam 
! Estimated beam: bmin=1.421 mas, bmaj=3.44 mas, bpa=4.628 degrees
! Estimated noise=0.397297 mJy/beam.
! Added new window around map position (0, 0).
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 1.04669 Jy
! Component: 100  -  total flux cleaned = 1.45465 Jy
! Total flux subtracted in 100 components = 1.45465 Jy
! Clean residual min=-0.069817 max=0.133204 Jy/beam
! Clean residual mean=-0.000055 rms=0.016931 Jy/beam
! Combined flux in latest and established models = 1.45465 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 1.45465 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.331581Jy  sigma=8.119914
! Fit after  self-cal, rms=0.315576Jy  sigma=7.851794
! Inverting map 
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.200403 Jy
! Component: 100  -  total flux cleaned = 0.293177 Jy
! Total flux subtracted in 100 components = 0.293177 Jy
! Clean residual min=-0.027098 max=0.039797 Jy/beam
! Clean residual mean=-0.000022 rms=0.005633 Jy/beam
! Combined flux in latest and established models = 1.74783 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 16 model components to the UV plane model.
! The established model now contains 30 components and 1.74783 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.143610Jy  sigma=3.123182
! Fit after  self-cal, rms=0.143177Jy  sigma=3.113311
! Inverting map 
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0494249 Jy
! Component: 100  -  total flux cleaned = 0.0772351 Jy
! Total flux subtracted in 100 components = 0.0772351 Jy
! Clean residual min=-0.016272 max=0.022458 Jy/beam
! Clean residual mean=-0.000013 rms=0.003979 Jy/beam
! Combined flux in latest and established models = 1.82506 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 13 model components to the UV plane model.
! The established model now contains 38 components and 1.82506 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.124253Jy  sigma=2.541893
! Fit after  self-cal, rms=0.124019Jy  sigma=2.534490
! Inverting map 
print "============== Finished uniform weighting CLEAN =============="
! ============== Finished uniform weighting CLEAN ============== 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.139 mas, bmaj=4.851 mas, bpa=3.033 degrees
! Estimated noise=0.202426 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0207546 Jy
! Component: 100  -  total flux cleaned = 0.0274024 Jy
! Component: 150  -  total flux cleaned = 0.0283793 Jy
! Component: 200  -  total flux cleaned = 0.0290051 Jy
! Total flux subtracted in 200 components = 0.0290051 Jy
! Clean residual min=-0.011558 max=0.014929 Jy/beam
! Clean residual mean=-0.000050 rms=0.002968 Jy/beam
! Combined flux in latest and established models = 1.85407 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 13 model components to the UV plane model.
! The established model now contains 43 components and 1.85407 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.121648Jy  sigma=2.466202
! Fit after  self-cal, rms=0.121648Jy  sigma=2.465793
! Inverting map 
print "============== Finished natural weighting CLEAN =============="
! ============== Finished natural weighting CLEAN ============== 
! 
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.01607
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     KP        0.99     LA        1.00     
!   MK        0.99     NL        0.97     OV        1.01     PT        0.99     
!   SC        0.95     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.996091
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00     FD        0.95     KP        1.02     LA        1.02     
!   MK        0.98     NL        1.01     OV        1.01     PT        1.04     
! 
! 
! Correcting IF 2.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.01354
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     KP        0.99     LA        1.01     
!   MK        1.00     NL        0.97     OV        1.00     PT        0.98     
!   SC        0.95     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.992108
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.01     FD        0.98     KP        1.01     LA        1.03     
!   MK        0.98     NL        1.02     OV        1.02     PT        1.02     
! 
! 
! Correcting IF 3.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.01072
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.01     KP        1.00     LA        1.00     
!   MK        0.96     NL        0.98     OV        1.00     PT        0.98     
!   SC        0.95     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.985196
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.04     FD        0.98     KP        1.03     LA        1.03     
!   MK        0.96     NL        1.04     OV        1.02     PT        1.03     
! 
! 
! Correcting IF 4.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.01207
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     KP        0.99     LA        1.00     
!   MK        0.99     NL        0.96     OV        1.00     PT        1.01     
!   SC        0.95     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.98727
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.01     FD        0.98     KP        1.03     LA        1.03     
!   MK        0.98     NL        1.02     OV        1.02     PT        1.03     
! 
! 
! Correcting IF 5.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.01333
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     KP        1.00     LA        1.00     
!   MK        1.01     NL        0.97     OV        1.00     PT        0.99     
!   SC        0.93     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.978305
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.07     FD        0.99     KP        1.03     LA        1.03     
!   MK        0.99     NL        1.02     OV        1.02     PT        1.03     
! 
! 
! Correcting IF 6.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.01224
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     KP        1.00     LA        1.00     
!   MK        1.01     NL        0.97     OV        1.00     PT        0.99     
!   SC        0.93     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.983784
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.01     FD        0.99     KP        1.02     LA        1.03     
!   MK        1.00     NL        1.02     OV        1.03     PT        1.03     
! 
! 
! Correcting IF 7.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.00606
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     KP        1.00     LA        1.00     
!   MK        1.01     NL        0.97     OV        1.00     PT        0.99     
!   SC        0.97     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.981046
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.01     FD        1.00     KP        1.03     LA        1.03     
!   MK        1.00     NL        1.03     OV        1.03     PT        1.03     
! 
! 
! Correcting IF 8.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.945684
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     KP        1.00     LA        1.01     
!   MK        1.02     NL        0.97     OV        1.00     PT        0.99     
!   SC        1.54     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.983175
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.01     FD        1.00     KP        1.03     LA        1.03     
!   MK        1.00     NL        1.02     OV        1.03     PT        1.02     
! 
! 
! Fit before self-cal, rms=0.121648Jy  sigma=2.465793
! Fit after  self-cal, rms=0.138373Jy  sigma=2.810099
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.138373Jy  sigma=2.810099
! Fit after  self-cal, rms=0.138374Jy  sigma=2.810085
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.139 mas, bmaj=4.873 mas, bpa=2.958 degrees
! Estimated noise=0.201484 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00948807 Jy
! Component: 100  -  total flux cleaned = -0.0104532 Jy
! Component: 150  -  total flux cleaned = -0.0102579 Jy
! Component: 200  -  total flux cleaned = -0.0102658 Jy
! Total flux subtracted in 200 components = -0.0102658 Jy
! Clean residual min=-0.011013 max=0.018282 Jy/beam
! Clean residual mean=-0.000002 rms=0.003082 Jy/beam
! Combined flux in latest and established models = 1.8438 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 16 model components to the UV plane model.
! The established model now contains 54 components and 1.8438 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.138450Jy  sigma=2.796470
! Fit after  self-cal, rms=0.138452Jy  sigma=2.796241
! Inverting map 
! Added new window around map position (33.6, -44.7).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0118117 Jy
! Component: 100  -  total flux cleaned = 0.0129206 Jy
! Component: 150  -  total flux cleaned = 0.0139848 Jy
! Component: 200  -  total flux cleaned = 0.0141657 Jy
! Total flux subtracted in 200 components = 0.0141657 Jy
! Clean residual min=-0.010827 max=0.012344 Jy/beam
! Clean residual mean=0.000005 rms=0.002521 Jy/beam
! Combined flux in latest and established models = 1.85797 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 34 model components to the UV plane model.
! The established model now contains 88 components and 1.85797 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.136761Jy  sigma=2.736411
! Fit after  self-cal, rms=0.136451Jy  sigma=2.727729
! Inverting map 
print "============== Finished amplitude gscale SELF-CAL =============="
! ============== Finished amplitude gscale SELF-CAL ============== 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.136451Jy  sigma=2.727729
! Fit after  self-cal, rms=0.135057Jy  sigma=2.715782
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (9, -6.6).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00813363 Jy
! Component: 100  -  total flux cleaned = 0.00941473 Jy
! Component: 150  -  total flux cleaned = 0.00943921 Jy
! Component: 200  -  total flux cleaned = 0.00943891 Jy
! Total flux subtracted in 200 components = 0.00943891 Jy
! Clean residual min=-0.010120 max=0.009047 Jy/beam
! Clean residual mean=0.000009 rms=0.002116 Jy/beam
! Combined flux in latest and established models = 1.86741 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 27 model components to the UV plane model.
! The established model now contains 113 components and 1.86741 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.133872Jy  sigma=2.683872
! Fit after  self-cal, rms=0.133518Jy  sigma=2.678526
! Inverting map 
print "=== Finished natural weighting clean with shorter phase_soltime "
! === Finished natural weighting clean with shorter phase_soltime  
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.139 x 4.873 at 2.958 degrees (North through East)
! Clean map  min=-0.0089383  max=1.3145 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "============== Finished amplitude self-cal =============="
  end if
! Performing amp+phase self-cal over 60 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.133518Jy  sigma=2.678526
! Fit after  self-cal, rms=0.179815Jy  sigma=1.719476
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.179815Jy  sigma=1.719476
! Fit after  self-cal, rms=0.179682Jy  sigma=1.718869
! Inverting map and beam 
! Estimated beam: bmin=2.128 mas, bmaj=4.847 mas, bpa=3.311 degrees
! Estimated noise=0.200871 mJy/beam.
! Added new window around map position (-18.6, -46.8).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00805358 Jy
! Component: 100  -  total flux cleaned = 0.0114612 Jy
! Component: 150  -  total flux cleaned = 0.0127135 Jy
! Component: 200  -  total flux cleaned = 0.0132562 Jy
! Total flux subtracted in 200 components = 0.0132562 Jy
! Clean residual min=-0.006424 max=0.005502 Jy/beam
! Clean residual mean=0.000011 rms=0.001310 Jy/beam
! Combined flux in latest and established models = 1.88066 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 33 model components to the UV plane model.
! The established model now contains 144 components and 1.88066 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.179173Jy  sigma=1.695776
! Fit after  self-cal, rms=0.179282Jy  sigma=1.694688
! Inverting map 
! ============== Finished amplitude self-cal ============== 
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.414 mas, bmaj=3.446 mas, bpa=4.565 degrees
! Estimated noise=0.393451 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 1.04598 Jy
! Component: 100  -  total flux cleaned = 1.45612 Jy
! Component: 150  -  total flux cleaned = 1.64041 Jy
! Component: 200  -  total flux cleaned = 1.73187 Jy
! Total flux subtracted in 200 components = 1.73187 Jy
! Clean residual min=-0.025883 max=0.039968 Jy/beam
! Clean residual mean=-0.000014 rms=0.005255 Jy/beam
! Combined flux in latest and established models = 1.73187 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 25 model components to the UV plane model.
! The established model now contains 25 components and 1.73187 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.128 mas, bmaj=4.847 mas, bpa=3.311 degrees
! Estimated noise=0.200871 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0749573 Jy
! Component: 100  -  total flux cleaned = 0.103753 Jy
! Component: 150  -  total flux cleaned = 0.120145 Jy
! Component: 200  -  total flux cleaned = 0.131086 Jy
! Total flux subtracted in 200 components = 0.131086 Jy
! Clean residual min=-0.006885 max=0.007361 Jy/beam
! Clean residual mean=0.000001 rms=0.001667 Jy/beam
! Combined flux in latest and established models = 1.86296 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 58 components and 1.86296 Jy
! Inverting map 
! Added new window around map position (1.8, -2.1).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00936406 Jy
! Component: 100  -  total flux cleaned = 0.0157057 Jy
! Component: 150  -  total flux cleaned = 0.0183396 Jy
! Component: 200  -  total flux cleaned = 0.0197694 Jy
! Total flux subtracted in 200 components = 0.0197694 Jy
! Clean residual min=-0.005850 max=0.005731 Jy/beam
! Clean residual mean=0.000010 rms=0.001344 Jy/beam
! Combined flux in latest and established models = 1.88273 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 88 components and 1.88273 Jy
! Inverting map 
clean
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000827404 Jy
! Component: 100  -  total flux cleaned = 0.00174366 Jy
! Component: 150  -  total flux cleaned = 0.00231786 Jy
! Component: 200  -  total flux cleaned = 0.00272503 Jy
! Total flux subtracted in 200 components = 0.00272503 Jy
! Clean residual min=-0.005844 max=0.005371 Jy/beam
! Clean residual mean=0.000011 rms=0.001287 Jy/beam
! Combined flux in latest and established models = 1.88545 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 37 model components to the UV plane model.
! The established model now contains 105 components and 1.88545 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.179453Jy  sigma=1.701930
! Fit after  self-cal, rms=0.179609Jy  sigma=1.699053
wmodel J2348-1631_C_map.mod
! Writing 105 model components to file: J2348-1631_C_map.mod
wobs   J2348-1631_C_uvs.fits
! Writing UV FITS file: J2348-1631_C_uvs.fits
wwins  J2348-1631_C_map.win
! wwins: Wrote 5 windows to J2348-1631_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -7.387e-05 Jy
! Component: 100  -  total flux cleaned = -7.02974e-05 Jy
! Component: 150  -  total flux cleaned = 1.15208e-05 Jy
! Component: 200  -  total flux cleaned = 0.00015931 Jy
! Component: 250  -  total flux cleaned = 0.000230204 Jy
! Component: 300  -  total flux cleaned = 0.000298306 Jy
! Component: 350  -  total flux cleaned = 0.000559731 Jy
! Component: 400  -  total flux cleaned = 0.000751002 Jy
! Component: 450  -  total flux cleaned = 0.000874751 Jy
! Component: 500  -  total flux cleaned = 0.000875069 Jy
! Component: 550  -  total flux cleaned = 0.000760219 Jy
! Component: 600  -  total flux cleaned = 0.000649966 Jy
! Component: 650  -  total flux cleaned = 0.000705867 Jy
! Component: 700  -  total flux cleaned = 0.000652885 Jy
! Component: 750  -  total flux cleaned = 0.000496724 Jy
! Component: 800  -  total flux cleaned = 0.000395762 Jy
! Component: 850  -  total flux cleaned = 0.000245967 Jy
! Component: 900  -  total flux cleaned = 0.000246241 Jy
! Component: 950  -  total flux cleaned = 0.000101121 Jy
! Component: 1000  -  total flux cleaned = 5.41314e-05 Jy
! Component: 1050  -  total flux cleaned = 5.42353e-05 Jy
! Component: 1100  -  total flux cleaned = 5.41115e-05 Jy
! Component: 1150  -  total flux cleaned = 5.39933e-05 Jy
! Component: 1200  -  total flux cleaned = 0.000274858 Jy
! Component: 1250  -  total flux cleaned = 0.000361297 Jy
! Component: 1300  -  total flux cleaned = 0.000532071 Jy
! Component: 1350  -  total flux cleaned = 0.000573494 Jy
! Component: 1400  -  total flux cleaned = 0.0007389 Jy
! Component: 1450  -  total flux cleaned = 0.000861048 Jy
! Component: 1500  -  total flux cleaned = 0.000942174 Jy
! Component: 1550  -  total flux cleaned = 0.000981796 Jy
! Component: 1600  -  total flux cleaned = 0.00109891 Jy
! Component: 1650  -  total flux cleaned = 0.0012142 Jy
! Component: 1700  -  total flux cleaned = 0.00128951 Jy
! Component: 1750  -  total flux cleaned = 0.00125259 Jy
! Component: 1800  -  total flux cleaned = 0.00139966 Jy
! Component: 1850  -  total flux cleaned = 0.0015448 Jy
! Component: 1900  -  total flux cleaned = 0.00172273 Jy
! Component: 1950  -  total flux cleaned = 0.00172254 Jy
! Component: 2000  -  total flux cleaned = 0.00189645 Jy
! Component: 2050  -  total flux cleaned = 0.00189647 Jy
! Component: 2100  -  total flux cleaned = 0.00196481 Jy
! Component: 2150  -  total flux cleaned = 0.00206518 Jy
! Component: 2200  -  total flux cleaned = 0.00223045 Jy
! Component: 2250  -  total flux cleaned = 0.00232864 Jy
! Component: 2300  -  total flux cleaned = 0.00242603 Jy
! Component: 2350  -  total flux cleaned = 0.00245814 Jy
! Component: 2400  -  total flux cleaned = 0.00252117 Jy
! Component: 2450  -  total flux cleaned = 0.00264517 Jy
! Component: 2500  -  total flux cleaned = 0.00273684 Jy
! Component: 2550  -  total flux cleaned = 0.00267629 Jy
! Component: 2600  -  total flux cleaned = 0.00279611 Jy
! Component: 2650  -  total flux cleaned = 0.0027663 Jy
! Component: 2700  -  total flux cleaned = 0.00279539 Jy
! Component: 2750  -  total flux cleaned = 0.0028533 Jy
! Component: 2800  -  total flux cleaned = 0.00293912 Jy
! Component: 2850  -  total flux cleaned = 0.00296728 Jy
! Component: 2900  -  total flux cleaned = 0.00302324 Jy
! Component: 2950  -  total flux cleaned = 0.00299543 Jy
! Component: 3000  -  total flux cleaned = 0.00318826 Jy
! Component: 3050  -  total flux cleaned = 0.00321507 Jy
! Component: 3100  -  total flux cleaned = 0.00321511 Jy
! Component: 3150  -  total flux cleaned = 0.00324197 Jy
! Component: 3200  -  total flux cleaned = 0.00332153 Jy
! Component: 3250  -  total flux cleaned = 0.00326914 Jy
! Component: 3300  -  total flux cleaned = 0.00329515 Jy
! Component: 3350  -  total flux cleaned = 0.00334624 Jy
! Component: 3400  -  total flux cleaned = 0.00332049 Jy
! Component: 3450  -  total flux cleaned = 0.00321941 Jy
! Component: 3500  -  total flux cleaned = 0.00321975 Jy
! Component: 3550  -  total flux cleaned = 0.00321976 Jy
! Component: 3600  -  total flux cleaned = 0.00317045 Jy
! Component: 3650  -  total flux cleaned = 0.0030726 Jy
! Component: 3700  -  total flux cleaned = 0.00304828 Jy
! Component: 3750  -  total flux cleaned = 0.00302406 Jy
! Component: 3800  -  total flux cleaned = 0.002952 Jy
! Component: 3850  -  total flux cleaned = 0.00273843 Jy
! Component: 3900  -  total flux cleaned = 0.00264432 Jy
! Component: 3950  -  total flux cleaned = 0.0025271 Jy
! Component: 4000  -  total flux cleaned = 0.00236442 Jy
! Component: 4050  -  total flux cleaned = 0.00229517 Jy
! Total flux subtracted in 4096 components = 0.00220325 Jy
! Clean residual min=-0.001209 max=0.001145 Jy/beam
! Clean residual mean=0.000003 rms=0.000407 Jy/beam
! Combined flux in latest and established models = 1.88765 Jy
keep
! Adding 249 model components to the UV plane model.
! The established model now contains 354 components and 1.88765 Jy
![Exited script file: /opt64/bin/pima_mupet_02.dfm]
wmap   /vlbi/vcs9/uvm//J2348-1631_C_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.128 x 4.847 at 3.311 degrees (North through East)
! Clean map  min=-0.0026602  max=1.3091 Jy/beam
! Writing clean map to FITS file: /vlbi/vcs9/uvm//J2348-1631_C_a_map.fits
wmodel /vlbi/vcs9/uvm//J2348-1631_C_a_map.mod
! Writing 354 model components to file: /vlbi/vcs9/uvm//J2348-1631_C_a_map.mod
wobs   /vlbi/vcs9/uvm//J2348-1631_C_a_uvs.fits
! Writing UV FITS file: /vlbi/vcs9/uvm//J2348-1631_C_a_uvs.fits
wwins  /vlbi/vcs9/uvm//J2348-1631_C_a_map.win
! wwins: Wrote 6 windows to /vlbi/vcs9/uvm//J2348-1631_C_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 1.30908 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000397981 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.0912046 0.0912046 0.182409 0.364818 0.729637 1.45927 2.91855 5.83709 11.6742 23.3484 46.6968 93.3935
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0011 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       1.309 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  3289.31 
quit
! Quitting program
! Log file /vlbi/vcs9/uvm//J2348-1631_C_a_dfm.log closed on Tue Dec 26 23:17:10 2017