! Started logfile: /vlbi/vcs9/uvm//J2346+3011_C_b_dfm.log on Tue Dec 26 23:16:44 2017
float field_size
field_size =  1024
float field_cell
field_cell =   0.3000
float taper_size
taper_size =   40.0
float freq
freq       =    4.12800
obs     /vlbi/vcs9/uvm//J2346+3011_C_b_uvm.fits
! Reading UV FITS file: /vlbi/vcs9/uvm//J2346+3011_C_b_uvm.fits
! AN table 1: 239 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.776569 visibilities/baseline/integration-bin.
! Found source: J2346+3011
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 94 lines of history.
! 
! Reading 66816 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/opt64/bin/pima_mupet_02.dfm J2346+3011_C]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 60
float amp_soltime2
amp_soltime2 = 5
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.1
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_02.dvm version of 2017.12.26 === "
! === Difmap script: pima_mupet_02.dvm version of 2017.12.26 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.145078 Jy 
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 309 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 309 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 309 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 309 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 309 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 309 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 309 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 309 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.007784Jy  sigma=31.485624
! Fit after  self-cal, rms=0.888244Jy  sigma=27.609830
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
peakwin win_mult
! Inverting map and beam 
! Estimated beam: bmin=1.39 mas, bmaj=2.887 mas, bpa=-8.842 degrees
! Estimated noise=0.177822 mJy/beam.
! Added new window around map position (0, 0).
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0970609 Jy
! Component: 100  -  total flux cleaned = 0.119691 Jy
! Total flux subtracted in 100 components = 0.119691 Jy
! Clean residual min=-0.010714 max=0.060296 Jy/beam
! Clean residual mean=0.000002 rms=0.002667 Jy/beam
! Combined flux in latest and established models = 0.119691 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.119691 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.084688Jy  sigma=2.585671
! Fit after  self-cal, rms=0.084544Jy  sigma=2.581934
! Inverting map 
! Added new window around map position (12.6, -13.5).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0531918 Jy
! Component: 100  -  total flux cleaned = 0.0648947 Jy
! Total flux subtracted in 100 components = 0.0648947 Jy
! Clean residual min=-0.005811 max=0.013749 Jy/beam
! Clean residual mean=0.000003 rms=0.001374 Jy/beam
! Combined flux in latest and established models = 0.184585 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 10 model components to the UV plane model.
! The established model now contains 22 components and 0.184585 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.054024Jy  sigma=1.628642
! Fit after  self-cal, rms=0.047042Jy  sigma=1.394349
! Inverting map 
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0139803 Jy
! Component: 100  -  total flux cleaned = 0.0189932 Jy
! Total flux subtracted in 100 components = 0.0189932 Jy
! Clean residual min=-0.003036 max=0.007594 Jy/beam
! Clean residual mean=0.000002 rms=0.000804 Jy/beam
! Combined flux in latest and established models = 0.203579 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 18 model components to the UV plane model.
! The established model now contains 35 components and 0.203579 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.042916Jy  sigma=1.263309
! Fit after  self-cal, rms=0.042473Jy  sigma=1.247349
! Inverting map 
! Added new window around map position (17.1, -17.7).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0066844 Jy
! Component: 100  -  total flux cleaned = 0.00885492 Jy
! Total flux subtracted in 100 components = 0.00885492 Jy
! Clean residual min=-0.002679 max=0.002978 Jy/beam
! Clean residual mean=0.000004 rms=0.000680 Jy/beam
! Combined flux in latest and established models = 0.212434 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 19 model components to the UV plane model.
! The established model now contains 47 components and 0.212434 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.040773Jy  sigma=1.190919
! Fit after  self-cal, rms=0.040588Jy  sigma=1.185157
! Inverting map 
print "============== Finished uniform weighting CLEAN =============="
! ============== Finished uniform weighting CLEAN ============== 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.856 mas, bmaj=3.408 mas, bpa=-9.192 degrees
! Estimated noise=0.0878098 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00685858 Jy
! Component: 100  -  total flux cleaned = 0.0098391 Jy
! Component: 150  -  total flux cleaned = 0.011105 Jy
! Component: 200  -  total flux cleaned = 0.0120589 Jy
! Total flux subtracted in 200 components = 0.0120589 Jy
! Clean residual min=-0.002281 max=0.003433 Jy/beam
! Clean residual mean=0.000014 rms=0.000641 Jy/beam
! Combined flux in latest and established models = 0.224492 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 43 model components to the UV plane model.
! The established model now contains 82 components and 0.224492 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039569Jy  sigma=1.153111
! Fit after  self-cal, rms=0.039413Jy  sigma=1.147881
! Inverting map 
print "============== Finished natural weighting CLEAN =============="
! ============== Finished natural weighting CLEAN ============== 
! 
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 18 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.01901
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.08     KP        0.86     
!   LA        0.94     MK        1.04     NL        1.06     OV        0.87     
!   PT        0.90     SC        1.05     
! 
! 
! Correcting IF 2.
!  A total of 18 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.03195
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.96     HN        1.04     KP        0.88     
!   LA        0.96     MK        0.95     NL        0.97     OV        0.93     
!   PT        0.92     SC        1.04     
! 
! 
! Correcting IF 3.
!  A total of 18 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.999222
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        1.01     KP        0.99     
!   LA        0.99     MK        0.95     NL        1.01     OV        1.04     
!   PT        0.98     SC        1.03     
! 
! 
! Correcting IF 4.
!  A total of 18 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.00648
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.01     HN        0.95     KP        0.98     
!   LA        0.98     MK        0.97     NL        1.03     OV        1.07     
!   PT        0.91     SC        1.02     
! 
! 
! Correcting IF 5.
!  A total of 18 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.987115
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.02     HN        0.98     KP        1.00     
!   LA        1.00     MK        0.99     NL        1.02     OV        1.05     
!   PT        1.01     SC        1.01     
! 
! 
! Correcting IF 6.
!  A total of 18 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.983077
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.03     HN        0.98     KP        1.00     
!   LA        0.99     MK        1.01     NL        1.02     OV        1.06     
!   PT        1.01     SC        1.02     
! 
! 
! Correcting IF 7.
!  A total of 18 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.979221
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.03     HN        1.03     KP        1.00     
!   LA        1.00     MK        0.99     NL        1.03     OV        1.05     
!   PT        1.01     SC        1.02     
! 
! 
! Correcting IF 8.
!  A total of 18 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.973739
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.03     HN        1.05     KP        1.01     
!   LA        0.99     MK        0.98     NL        1.02     OV        1.05     
!   PT        1.01     SC        1.03     
! 
! 
! Fit before self-cal, rms=0.039413Jy  sigma=1.147881
! Fit after  self-cal, rms=0.038400Jy  sigma=1.117508
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.038400Jy  sigma=1.117508
! Fit after  self-cal, rms=0.038363Jy  sigma=1.116515
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.855 mas, bmaj=3.464 mas, bpa=-10.18 degrees
! Estimated noise=0.0873578 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00229662 Jy
! Component: 100  -  total flux cleaned = -0.00191917 Jy
! Component: 150  -  total flux cleaned = -0.00152546 Jy
! Component: 200  -  total flux cleaned = -0.0012944 Jy
! Total flux subtracted in 200 components = -0.0012944 Jy
! Clean residual min=-0.001919 max=0.002357 Jy/beam
! Clean residual mean=0.000008 rms=0.000519 Jy/beam
! Combined flux in latest and established models = 0.223198 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 28 model components to the UV plane model.
! The established model now contains 101 components and 0.223198 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.038104Jy  sigma=1.108585
! Fit after  self-cal, rms=0.038053Jy  sigma=1.106798
! Inverting map 
print "============== Finished amplitude gscale SELF-CAL =============="
! ============== Finished amplitude gscale SELF-CAL ============== 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.038053Jy  sigma=1.106798
! Fit after  self-cal, rms=0.036378Jy  sigma=1.059510
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (38.4, -66.3).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00192939 Jy
! Component: 100  -  total flux cleaned = 0.00231999 Jy
! Component: 150  -  total flux cleaned = 0.00268669 Jy
! Component: 200  -  total flux cleaned = 0.00299583 Jy
! Total flux subtracted in 200 components = 0.00299583 Jy
! Clean residual min=-0.001817 max=0.002165 Jy/beam
! Clean residual mean=0.000007 rms=0.000470 Jy/beam
! Combined flux in latest and established models = 0.226194 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 48 model components to the UV plane model.
! The established model now contains 132 components and 0.226194 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.036170Jy  sigma=1.053470
! Fit after  self-cal, rms=0.036078Jy  sigma=1.050384
! Inverting map 
! Added new window around map position (-48.6, -73.5).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00247101 Jy
! Component: 100  -  total flux cleaned = 0.00332945 Jy
! Component: 150  -  total flux cleaned = 0.00378784 Jy
! Component: 200  -  total flux cleaned = 0.00418166 Jy
! Total flux subtracted in 200 components = 0.00418166 Jy
! Clean residual min=-0.001637 max=0.002098 Jy/beam
! Clean residual mean=0.000007 rms=0.000445 Jy/beam
! Combined flux in latest and established models = 0.230376 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 46 model components to the UV plane model.
! The established model now contains 165 components and 0.230376 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.035933Jy  sigma=1.045395
! Fit after  self-cal, rms=0.035952Jy  sigma=1.045412
! Inverting map 
! Added new window around map position (64.2, -20.4).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00220302 Jy
! Component: 100  -  total flux cleaned = 0.00255418 Jy
! Component: 150  -  total flux cleaned = 0.00286098 Jy
! Component: 200  -  total flux cleaned = 0.00310359 Jy
! Total flux subtracted in 200 components = 0.00310359 Jy
! Clean residual min=-0.001493 max=0.001884 Jy/beam
! Clean residual mean=0.000005 rms=0.000420 Jy/beam
! Combined flux in latest and established models = 0.233479 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 46 model components to the UV plane model.
! The established model now contains 191 components and 0.233479 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.035828Jy  sigma=1.041547
! Fit after  self-cal, rms=0.035858Jy  sigma=1.042007
! Inverting map 
print "=== Finished natural weighting clean with shorter phase_soltime "
! === Finished natural weighting clean with shorter phase_soltime  
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.855 x 3.464 at -10.18 degrees (North through East)
! Clean map  min=-0.0014634  max=0.10524 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "============== Finished amplitude self-cal =============="
  end if
! Performing amp+phase self-cal over 60 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.035858Jy  sigma=1.042007
! Fit after  self-cal, rms=0.036290Jy  sigma=0.946533
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.036290Jy  sigma=0.946533
! Fit after  self-cal, rms=0.036329Jy  sigma=0.946446
! Inverting map and beam 
! Estimated beam: bmin=1.86 mas, bmaj=3.435 mas, bpa=-9.925 degrees
! Estimated noise=0.0871614 mJy/beam.
! Added new window around map position (2.7, -3.3).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000413437 Jy
! Component: 100  -  total flux cleaned = 5.64087e-05 Jy
! Component: 150  -  total flux cleaned = -0.000106628 Jy
! Component: 200  -  total flux cleaned = -0.000176596 Jy
! Total flux subtracted in 200 components = -0.000176596 Jy
! Clean residual min=-0.000810 max=0.001023 Jy/beam
! Clean residual mean=0.000003 rms=0.000224 Jy/beam
! Combined flux in latest and established models = 0.233303 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 36 model components to the UV plane model.
! The established model now contains 216 components and 0.233303 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.036227Jy  sigma=0.942490
! Fit after  self-cal, rms=0.036251Jy  sigma=0.942382
! Inverting map 
! Added new window around map position (-60, 21.9).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0012881 Jy
! Component: 100  -  total flux cleaned = 0.00144216 Jy
! Component: 150  -  total flux cleaned = 0.00147604 Jy
! Component: 200  -  total flux cleaned = 0.00156412 Jy
! Total flux subtracted in 200 components = 0.00156412 Jy
! Clean residual min=-0.000806 max=0.000809 Jy/beam
! Clean residual mean=0.000001 rms=0.000200 Jy/beam
! Combined flux in latest and established models = 0.234867 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 46 model components to the UV plane model.
! The established model now contains 245 components and 0.234867 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.036198Jy  sigma=0.940329
! Fit after  self-cal, rms=0.036220Jy  sigma=0.940341
! Inverting map 
! ============== Finished amplitude self-cal ============== 
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.39 mas, bmaj=2.885 mas, bpa=-9.081 degrees
! Estimated noise=0.179982 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.118023 Jy
! Component: 100  -  total flux cleaned = 0.159167 Jy
! Component: 150  -  total flux cleaned = 0.177739 Jy
! Component: 200  -  total flux cleaned = 0.189302 Jy
! Total flux subtracted in 200 components = 0.189302 Jy
! Clean residual min=-0.002264 max=0.004690 Jy/beam
! Clean residual mean=0.000001 rms=0.000530 Jy/beam
! Combined flux in latest and established models = 0.189302 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 23 model components to the UV plane model.
! The established model now contains 23 components and 0.189302 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.86 mas, bmaj=3.435 mas, bpa=-9.925 degrees
! Estimated noise=0.0871614 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0120009 Jy
! Component: 100  -  total flux cleaned = 0.0193264 Jy
! Component: 150  -  total flux cleaned = 0.0243553 Jy
! Component: 200  -  total flux cleaned = 0.0279381 Jy
! Total flux subtracted in 200 components = 0.0279381 Jy
! Clean residual min=-0.001097 max=0.001857 Jy/beam
! Clean residual mean=0.000009 rms=0.000347 Jy/beam
! Combined flux in latest and established models = 0.21724 Jy
! Adding 74 model components to the UV plane model.
! The established model now contains 85 components and 0.21724 Jy
! Inverting map 
! Added new window around map position (14.4, -19.5).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00278761 Jy
! Component: 100  -  total flux cleaned = 0.00497204 Jy
! Component: 150  -  total flux cleaned = 0.0067612 Jy
! Component: 200  -  total flux cleaned = 0.00828725 Jy
! Total flux subtracted in 200 components = 0.00828725 Jy
! Clean residual min=-0.000922 max=0.001024 Jy/beam
! Clean residual mean=0.000005 rms=0.000240 Jy/beam
! Combined flux in latest and established models = 0.225528 Jy
! Adding 70 model components to the UV plane model.
! The established model now contains 144 components and 0.225528 Jy
! Inverting map 
! Added new window around map position (-6, -2.4).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00139984 Jy
! Component: 100  -  total flux cleaned = 0.00256006 Jy
! Component: 150  -  total flux cleaned = 0.00342476 Jy
! Component: 200  -  total flux cleaned = 0.00423865 Jy
! Total flux subtracted in 200 components = 0.00423865 Jy
! Clean residual min=-0.000818 max=0.000917 Jy/beam
! Clean residual mean=0.000003 rms=0.000202 Jy/beam
! Combined flux in latest and established models = 0.229766 Jy
! Adding 72 model components to the UV plane model.
! The established model now contains 193 components and 0.229766 Jy
! Inverting map 
! Added new window around map position (24.9, -49.2).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00104232 Jy
! Component: 100  -  total flux cleaned = 0.00174455 Jy
! Component: 150  -  total flux cleaned = 0.00232248 Jy
! Component: 200  -  total flux cleaned = 0.00279895 Jy
! Total flux subtracted in 200 components = 0.00279895 Jy
! Clean residual min=-0.000723 max=0.000744 Jy/beam
! Clean residual mean=0.000002 rms=0.000182 Jy/beam
! Combined flux in latest and established models = 0.232565 Jy
! Adding 66 model components to the UV plane model.
! The established model now contains 227 components and 0.232565 Jy
! Inverting map 
clean
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000439492 Jy
! Component: 100  -  total flux cleaned = 0.000801412 Jy
! Component: 150  -  total flux cleaned = 0.00111798 Jy
! Component: 200  -  total flux cleaned = 0.00131652 Jy
! Total flux subtracted in 200 components = 0.00131652 Jy
! Clean residual min=-0.000683 max=0.000720 Jy/beam
! Clean residual mean=0.000002 rms=0.000174 Jy/beam
! Combined flux in latest and established models = 0.233882 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 82 model components to the UV plane model.
! The established model now contains 262 components and 0.233882 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.036101Jy  sigma=0.936341
! Fit after  self-cal, rms=0.036112Jy  sigma=0.935972
wmodel J2346+3011_C_map.mod
! Writing 262 model components to file: J2346+3011_C_map.mod
wobs   J2346+3011_C_uvs.fits
! Writing UV FITS file: J2346+3011_C_uvs.fits
wwins  J2346+3011_C_map.win
! wwins: Wrote 11 windows to J2346+3011_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 7.00356e-05 Jy
! Component: 100  -  total flux cleaned = 0.000125646 Jy
! Component: 150  -  total flux cleaned = 0.000178288 Jy
! Component: 200  -  total flux cleaned = 0.00020876 Jy
! Component: 250  -  total flux cleaned = 0.000248095 Jy
! Component: 300  -  total flux cleaned = 0.000286334 Jy
! Component: 350  -  total flux cleaned = 0.000342427 Jy
! Component: 400  -  total flux cleaned = 0.000360885 Jy
! Component: 450  -  total flux cleaned = 0.000405973 Jy
! Component: 500  -  total flux cleaned = 0.000432549 Jy
! Component: 550  -  total flux cleaned = 0.000449946 Jy
! Component: 600  -  total flux cleaned = 0.000492685 Jy
! Component: 650  -  total flux cleaned = 0.000509522 Jy
! Component: 700  -  total flux cleaned = 0.000575927 Jy
! Component: 750  -  total flux cleaned = 0.000583905 Jy
! Component: 800  -  total flux cleaned = 0.000632645 Jy
! Component: 850  -  total flux cleaned = 0.00068076 Jy
! Component: 900  -  total flux cleaned = 0.000704598 Jy
! Component: 950  -  total flux cleaned = 0.000743746 Jy
! Component: 1000  -  total flux cleaned = 0.000759293 Jy
! Component: 1050  -  total flux cleaned = 0.000789938 Jy
! Component: 1100  -  total flux cleaned = 0.000797612 Jy
! Component: 1150  -  total flux cleaned = 0.000827629 Jy
! Component: 1200  -  total flux cleaned = 0.000834888 Jy
! Component: 1250  -  total flux cleaned = 0.000820285 Jy
! Component: 1300  -  total flux cleaned = 0.000820301 Jy
! Component: 1350  -  total flux cleaned = 0.000848853 Jy
! Component: 1400  -  total flux cleaned = 0.000820496 Jy
! Component: 1450  -  total flux cleaned = 0.000841543 Jy
! Component: 1500  -  total flux cleaned = 0.00085546 Jy
! Component: 1550  -  total flux cleaned = 0.00086928 Jy
! Component: 1600  -  total flux cleaned = 0.000882975 Jy
! Component: 1650  -  total flux cleaned = 0.00088298 Jy
! Component: 1700  -  total flux cleaned = 0.000929901 Jy
! Component: 1750  -  total flux cleaned = 0.000943112 Jy
! Component: 1800  -  total flux cleaned = 0.000949697 Jy
! Component: 1850  -  total flux cleaned = 0.000988953 Jy
! Component: 1900  -  total flux cleaned = 0.00098894 Jy
! Component: 1950  -  total flux cleaned = 0.00104032 Jy
! Component: 2000  -  total flux cleaned = 0.00104036 Jy
! Component: 2050  -  total flux cleaned = 0.00104033 Jy
! Component: 2100  -  total flux cleaned = 0.00105928 Jy
! Component: 2150  -  total flux cleaned = 0.00109674 Jy
! Component: 2200  -  total flux cleaned = 0.0010844 Jy
! Component: 2250  -  total flux cleaned = 0.00110288 Jy
! Component: 2300  -  total flux cleaned = 0.00110906 Jy
! Component: 2350  -  total flux cleaned = 0.00114535 Jy
! Component: 2400  -  total flux cleaned = 0.00115137 Jy
! Component: 2450  -  total flux cleaned = 0.00116334 Jy
! Component: 2500  -  total flux cleaned = 0.00120488 Jy
! Component: 2550  -  total flux cleaned = 0.00120492 Jy
! Component: 2600  -  total flux cleaned = 0.00122246 Jy
! Component: 2650  -  total flux cleaned = 0.00123988 Jy
! Component: 2700  -  total flux cleaned = 0.00124565 Jy
! Component: 2750  -  total flux cleaned = 0.00126864 Jy
! Component: 2800  -  total flux cleaned = 0.00125721 Jy
! Component: 2850  -  total flux cleaned = 0.00130248 Jy
! Component: 2900  -  total flux cleaned = 0.00129124 Jy
! Component: 2950  -  total flux cleaned = 0.00130806 Jy
! Component: 3000  -  total flux cleaned = 0.00133586 Jy
! Component: 3050  -  total flux cleaned = 0.00133033 Jy
! Component: 3100  -  total flux cleaned = 0.00135777 Jy
! Component: 3150  -  total flux cleaned = 0.00137416 Jy
! Component: 3200  -  total flux cleaned = 0.00136333 Jy
! Component: 3250  -  total flux cleaned = 0.00139032 Jy
! Component: 3300  -  total flux cleaned = 0.00140105 Jy
! Component: 3350  -  total flux cleaned = 0.00140635 Jy
! Component: 3400  -  total flux cleaned = 0.00141164 Jy
! Component: 3450  -  total flux cleaned = 0.00141695 Jy
! Component: 3500  -  total flux cleaned = 0.00145896 Jy
! Component: 3550  -  total flux cleaned = 0.00146418 Jy
! Component: 3600  -  total flux cleaned = 0.00146939 Jy
! Component: 3650  -  total flux cleaned = 0.00149006 Jy
! Component: 3700  -  total flux cleaned = 0.00151576 Jy
! Component: 3750  -  total flux cleaned = 0.0015209 Jy
! Component: 3800  -  total flux cleaned = 0.00154635 Jy
! Component: 3850  -  total flux cleaned = 0.00156154 Jy
! Component: 3900  -  total flux cleaned = 0.00159172 Jy
! Component: 3950  -  total flux cleaned = 0.00160671 Jy
! Component: 4000  -  total flux cleaned = 0.00161163 Jy
! Component: 4050  -  total flux cleaned = 0.00161663 Jy
! Total flux subtracted in 4096 components = 0.00165118 Jy
! Clean residual min=-0.000283 max=0.000273 Jy/beam
! Clean residual mean=0.000001 rms=0.000097 Jy/beam
! Combined flux in latest and established models = 0.235533 Jy
keep
! Adding 375 model components to the UV plane model.
! The established model now contains 637 components and 0.235533 Jy
![Exited script file: /opt64/bin/pima_mupet_02.dfm]
wmap   /vlbi/vcs9/uvm//J2346+3011_C_b_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.86 x 3.435 at -9.925 degrees (North through East)
! Clean map  min=-0.00051249  max=0.1057 Jy/beam
! Writing clean map to FITS file: /vlbi/vcs9/uvm//J2346+3011_C_b_map.fits
wmodel /vlbi/vcs9/uvm//J2346+3011_C_b_map.mod
! Writing 637 model components to file: /vlbi/vcs9/uvm//J2346+3011_C_b_map.mod
wobs   /vlbi/vcs9/uvm//J2346+3011_C_b_uvs.fits
! Writing UV FITS file: /vlbi/vcs9/uvm//J2346+3011_C_b_uvs.fits
wwins  /vlbi/vcs9/uvm//J2346+3011_C_b_map.win
! wwins: Wrote 12 windows to /vlbi/vcs9/uvm//J2346+3011_C_b_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.105702 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 9.65052e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.273898 0.273898 0.547796 1.09559 2.19118 4.38237 8.76473 17.5295 35.0589 70.1179
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0002 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.105 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1095.3 
quit
! Quitting program
! Log file /vlbi/vcs9/uvm//J2346+3011_C_b_dfm.log closed on Tue Dec 26 23:16:54 2017