! Started logfile: /vlbi/vcs9/uvm//J2225-0457_X_a_dfm.log on Tue Dec 26 23:10:43 2017 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 7.39200 obs /vlbi/vcs9/uvm//J2225-0457_X_a_uvm.fits ! Reading UV FITS file: /vlbi/vcs9/uvm//J2225-0457_X_a_uvm.fits ! AN table 1: 43 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.820598 visibilities/baseline/integration-bin. ! Found source: J2225-0457 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 7.392e+09 3.2e+07 1 3.2e+07 ! 02 2 7.424e+09 3.2e+07 1 3.2e+07 ! 03 3 7.456e+09 3.2e+07 1 3.2e+07 ! 04 4 7.552e+09 3.2e+07 1 3.2e+07 ! 05 5 7.744e+09 3.2e+07 1 3.2e+07 ! 06 6 7.776e+09 3.2e+07 1 3.2e+07 ! 07 7 7.808e+09 3.2e+07 1 3.2e+07 ! 08 8 7.84e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 94 lines of history. ! ! Reading 7904 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 8 channels. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_02.dfm J2225-0457_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 60 float amp_soltime2 amp_soltime2 = 5 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.1 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_02.dvm version of 2017.12.26 === " ! === Difmap script: pima_mupet_02.dvm version of 2017.12.26 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 1.16031 Jy startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 50 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 50 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 50 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 50 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 50 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 50 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 50 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 50 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.563512Jy sigma=34.288314 ! Fit after self-cal, rms=0.538332Jy sigma=11.997908 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. peakwin win_mult ! Inverting map and beam ! Estimated beam: bmin=1.05 mas, bmaj=3.345 mas, bpa=-19.38 degrees ! Estimated noise=0.657685 mJy/beam. ! Added new window around map position (0, 0). flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.804809 Jy ! Component: 100 - total flux cleaned = 1.12749 Jy ! Total flux subtracted in 100 components = 1.12749 Jy ! Clean residual min=-0.066816 max=0.148740 Jy/beam ! Clean residual mean=-0.002649 rms=0.021674 Jy/beam ! Combined flux in latest and established models = 1.12749 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 1.12749 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.358474Jy sigma=7.874147 ! Fit after self-cal, rms=0.354288Jy sigma=7.776709 ! Inverting map ! Added new window around map position (2, -0.8). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.190586 Jy ! Component: 100 - total flux cleaned = 0.297342 Jy ! Total flux subtracted in 100 components = 0.297342 Jy ! Clean residual min=-0.043118 max=0.054150 Jy/beam ! Clean residual mean=-0.001732 rms=0.011545 Jy/beam ! Combined flux in latest and established models = 1.42483 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 37 components and 1.42483 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.199085Jy sigma=4.359487 ! Fit after self-cal, rms=0.196846Jy sigma=4.303162 ! Inverting map print "============== Finished uniform weighting CLEAN ==============" ! ============== Finished uniform weighting CLEAN ============== ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.403 mas, bmaj=3.247 mas, bpa=-15.87 degrees ! Estimated noise=0.363728 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.130108 Jy ! Component: 100 - total flux cleaned = 0.197495 Jy ! Component: 150 - total flux cleaned = 0.239964 Jy ! Component: 200 - total flux cleaned = 0.268421 Jy ! Total flux subtracted in 200 components = 0.268421 Jy ! Clean residual min=-0.033480 max=0.042484 Jy/beam ! Clean residual mean=-0.001912 rms=0.011058 Jy/beam ! Combined flux in latest and established models = 1.69325 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 80 model components to the UV plane model. ! The established model now contains 108 components and 1.69325 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.129657Jy sigma=2.595554 ! Fit after self-cal, rms=0.128975Jy sigma=2.572799 ! Inverting map print "============== Finished natural weighting CLEAN ==============" ! ============== Finished natural weighting CLEAN ============== ! gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.998826 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.07 KP 0.97 LA 0.95 ! MK 1.02 NL 1.09 OV 1.00 PT 0.93 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.997499 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.04 KP 0.98 LA 0.96 ! MK 1.00 NL 1.11 OV 1.01 PT 0.94 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.996891 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.06 KP 0.98 LA 0.95 ! MK 1.01 NL 1.10 OV 1.00 PT 0.94 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.993869 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.06 KP 0.98 LA 0.96 ! MK 1.01 NL 1.11 OV 1.01 PT 0.94 ! ! ! Correcting IF 5. ! Amplitude normalization factor in sub-array 1: 0.991225 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.09 KP 0.99 LA 0.97 ! MK 1.00 NL 1.11 OV 1.01 PT 0.94 ! ! ! Correcting IF 6. ! Amplitude normalization factor in sub-array 1: 0.989027 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.09 KP 0.99 LA 0.97 ! MK 0.99 NL 1.11 OV 1.02 PT 0.95 ! ! ! Correcting IF 7. ! Amplitude normalization factor in sub-array 1: 0.98919 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.08 KP 0.99 LA 0.97 ! MK 1.01 NL 1.11 OV 1.01 PT 0.95 ! ! ! Correcting IF 8. ! Amplitude normalization factor in sub-array 1: 0.994968 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.09 KP 0.98 LA 0.96 ! MK 1.00 NL 1.09 OV 1.00 PT 0.94 ! ! ! Fit before self-cal, rms=0.128975Jy sigma=2.572799 ! Fit after self-cal, rms=0.104440Jy sigma=2.020309 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.104440Jy sigma=2.020309 ! Fit after self-cal, rms=0.104502Jy sigma=2.020025 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.416 mas, bmaj=3.241 mas, bpa=-15.84 degrees ! Estimated noise=0.356823 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0127571 Jy ! Component: 100 - total flux cleaned = -0.0172265 Jy ! Component: 150 - total flux cleaned = -0.0202563 Jy ! Component: 200 - total flux cleaned = -0.0222125 Jy ! Total flux subtracted in 200 components = -0.0222125 Jy ! Clean residual min=-0.016594 max=0.026373 Jy/beam ! Clean residual mean=-0.000712 rms=0.006141 Jy/beam ! Combined flux in latest and established models = 1.67104 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 125 components and 1.67104 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.100474Jy sigma=1.951446 ! Fit after self-cal, rms=0.100383Jy sigma=1.948495 ! Inverting map print "============== Finished amplitude gscale SELF-CAL ==============" ! ============== Finished amplitude gscale SELF-CAL ============== ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.100383Jy sigma=1.948495 ! Fit after self-cal, rms=0.098023Jy sigma=1.894231 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000642048 Jy ! Component: 100 - total flux cleaned = -0.0021599 Jy ! Component: 150 - total flux cleaned = -0.0028954 Jy ! Component: 200 - total flux cleaned = -0.00322656 Jy ! Total flux subtracted in 200 components = -0.00322656 Jy ! Clean residual min=-0.016161 max=0.025675 Jy/beam ! Clean residual mean=-0.000737 rms=0.006088 Jy/beam ! Combined flux in latest and established models = 1.66781 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 133 components and 1.66781 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.097032Jy sigma=1.879398 ! Fit after self-cal, rms=0.096394Jy sigma=1.865554 ! Inverting map print "=== Finished natural weighting clean with shorter phase_soltime " ! === Finished natural weighting clean with shorter phase_soltime ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.416 x 3.241 at -15.84 degrees (North through East) ! Clean map min=-0.015824 max=0.91512 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "============== Finished amplitude self-cal ==============" end if ! Performing amp+phase self-cal over 60 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.096394Jy sigma=1.865554 ! Fit after self-cal, rms=0.089386Jy sigma=1.656377 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.089386Jy sigma=1.656377 ! Fit after self-cal, rms=0.089202Jy sigma=1.652553 ! Inverting map and beam ! Estimated beam: bmin=1.411 mas, bmaj=3.252 mas, bpa=-15.91 degrees ! Estimated noise=0.355815 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000617632 Jy ! Component: 100 - total flux cleaned = -0.00169866 Jy ! Component: 150 - total flux cleaned = -0.00249737 Jy ! Component: 200 - total flux cleaned = -0.00306546 Jy ! Total flux subtracted in 200 components = -0.00306546 Jy ! Clean residual min=-0.015133 max=0.023332 Jy/beam ! Clean residual mean=-0.000718 rms=0.005675 Jy/beam ! Combined flux in latest and established models = 1.66475 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 140 components and 1.66475 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.088307Jy sigma=1.639215 ! Fit after self-cal, rms=0.088183Jy sigma=1.636360 ! Inverting map ! ============== Finished amplitude self-cal ============== print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.05 mas, bmaj=3.342 mas, bpa=-19.49 degrees ! Estimated noise=0.657323 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.822412 Jy ! Component: 100 - total flux cleaned = 1.14165 Jy ! Component: 150 - total flux cleaned = 1.31157 Jy ! Component: 200 - total flux cleaned = 1.41708 Jy ! Total flux subtracted in 200 components = 1.41708 Jy ! Clean residual min=-0.028652 max=0.048186 Jy/beam ! Clean residual mean=-0.001190 rms=0.008872 Jy/beam ! Combined flux in latest and established models = 1.41708 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 37 model components to the UV plane model. ! The established model now contains 37 components and 1.41708 Jy ! Inverting map and beam ! Estimated beam: bmin=1.411 mas, bmaj=3.252 mas, bpa=-15.91 degrees ! Estimated noise=0.355815 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.106904 Jy ! Component: 100 - total flux cleaned = 0.1599 Jy ! Component: 150 - total flux cleaned = 0.188832 Jy ! Component: 200 - total flux cleaned = 0.206827 Jy ! Total flux subtracted in 200 components = 0.206827 Jy ! Clean residual min=-0.017508 max=0.023212 Jy/beam ! Clean residual mean=-0.001044 rms=0.006483 Jy/beam ! Combined flux in latest and established models = 1.6239 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 79 components and 1.6239 Jy ! Inverting map clean ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0115186 Jy ! Component: 100 - total flux cleaned = 0.0163346 Jy ! Component: 150 - total flux cleaned = 0.0188744 Jy ! Component: 200 - total flux cleaned = 0.0205915 Jy ! Total flux subtracted in 200 components = 0.0205915 Jy ! Clean residual min=-0.015695 max=0.022978 Jy/beam ! Clean residual mean=-0.000875 rms=0.006024 Jy/beam ! Combined flux in latest and established models = 1.6445 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 92 components and 1.6445 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.088105Jy sigma=1.661375 ! Fit after self-cal, rms=0.087318Jy sigma=1.649930 wmodel J2225-0457_X_map.mod ! Writing 92 model components to file: J2225-0457_X_map.mod wobs J2225-0457_X_uvs.fits ! Writing UV FITS file: J2225-0457_X_uvs.fits wwins J2225-0457_X_map.win ! wwins: Wrote 2 windows to J2225-0457_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0102845 Jy ! Component: 100 - total flux cleaned = 0.0187767 Jy ! Component: 150 - total flux cleaned = 0.0262362 Jy ! Component: 200 - total flux cleaned = 0.0329926 Jy ! Component: 250 - total flux cleaned = 0.0374962 Jy ! Component: 300 - total flux cleaned = 0.040292 Jy ! Component: 350 - total flux cleaned = 0.0415964 Jy ! Component: 400 - total flux cleaned = 0.0422117 Jy ! Component: 450 - total flux cleaned = 0.0429887 Jy ! Component: 500 - total flux cleaned = 0.0433582 Jy ! Component: 550 - total flux cleaned = 0.0435379 Jy ! Component: 600 - total flux cleaned = 0.0447166 Jy ! Component: 650 - total flux cleaned = 0.0456843 Jy ! Component: 700 - total flux cleaned = 0.0466085 Jy ! Component: 750 - total flux cleaned = 0.0476461 Jy ! Component: 800 - total flux cleaned = 0.0487817 Jy ! Component: 850 - total flux cleaned = 0.049333 Jy ! Component: 900 - total flux cleaned = 0.0502539 Jy ! Component: 950 - total flux cleaned = 0.0510128 Jy ! Component: 1000 - total flux cleaned = 0.0513833 Jy ! Component: 1050 - total flux cleaned = 0.0521052 Jy ! Component: 1100 - total flux cleaned = 0.0532638 Jy ! Component: 1150 - total flux cleaned = 0.0538196 Jy ! Component: 1200 - total flux cleaned = 0.0542522 Jy ! Component: 1250 - total flux cleaned = 0.0549891 Jy ! Component: 1300 - total flux cleaned = 0.055705 Jy ! Component: 1350 - total flux cleaned = 0.0565989 Jy ! Component: 1400 - total flux cleaned = 0.0570812 Jy ! Component: 1450 - total flux cleaned = 0.0575534 Jy ! Component: 1500 - total flux cleaned = 0.0581054 Jy ! Component: 1550 - total flux cleaned = 0.0583743 Jy ! Component: 1600 - total flux cleaned = 0.0585503 Jy ! Component: 1650 - total flux cleaned = 0.058807 Jy ! Component: 1700 - total flux cleaned = 0.0593088 Jy ! Component: 1750 - total flux cleaned = 0.0593919 Jy ! Component: 1800 - total flux cleaned = 0.0595529 Jy ! Component: 1850 - total flux cleaned = 0.059632 Jy ! Component: 1900 - total flux cleaned = 0.0599398 Jy ! Component: 1950 - total flux cleaned = 0.0599385 Jy ! Component: 2000 - total flux cleaned = 0.0600861 Jy ! Component: 2050 - total flux cleaned = 0.0601586 Jy ! Component: 2100 - total flux cleaned = 0.0602306 Jy ! Component: 2150 - total flux cleaned = 0.0603014 Jy ! Component: 2200 - total flux cleaned = 0.0603701 Jy ! Component: 2250 - total flux cleaned = 0.060438 Jy ! Component: 2300 - total flux cleaned = 0.0604383 Jy ! Component: 2350 - total flux cleaned = 0.0606982 Jy ! Component: 2400 - total flux cleaned = 0.0610188 Jy ! Component: 2450 - total flux cleaned = 0.0611444 Jy ! Component: 2500 - total flux cleaned = 0.0612694 Jy ! Component: 2550 - total flux cleaned = 0.0615727 Jy ! Component: 2600 - total flux cleaned = 0.0616917 Jy ! Component: 2650 - total flux cleaned = 0.0617512 Jy ! Component: 2700 - total flux cleaned = 0.0620977 Jy ! Component: 2750 - total flux cleaned = 0.0624942 Jy ! Component: 2800 - total flux cleaned = 0.0626615 Jy ! Component: 2850 - total flux cleaned = 0.0629926 Jy ! Component: 2900 - total flux cleaned = 0.063211 Jy ! Component: 2950 - total flux cleaned = 0.0635856 Jy ! Component: 3000 - total flux cleaned = 0.064008 Jy ! Component: 3050 - total flux cleaned = 0.0643202 Jy ! Component: 3100 - total flux cleaned = 0.0646805 Jy ! Component: 3150 - total flux cleaned = 0.0651356 Jy ! Component: 3200 - total flux cleaned = 0.0655352 Jy ! Component: 3250 - total flux cleaned = 0.0660292 Jy ! Component: 3300 - total flux cleaned = 0.0665176 Jy ! Component: 3350 - total flux cleaned = 0.067048 Jy ! Component: 3400 - total flux cleaned = 0.0674772 Jy ! Component: 3450 - total flux cleaned = 0.0677609 Jy ! Component: 3500 - total flux cleaned = 0.0682758 Jy ! Component: 3550 - total flux cleaned = 0.0687391 Jy ! Component: 3600 - total flux cleaned = 0.0691518 Jy ! Component: 3650 - total flux cleaned = 0.0696068 Jy ! Component: 3700 - total flux cleaned = 0.0699669 Jy ! Component: 3750 - total flux cleaned = 0.0705921 Jy ! Component: 3800 - total flux cleaned = 0.0709463 Jy ! Component: 3850 - total flux cleaned = 0.0715176 Jy ! Component: 3900 - total flux cleaned = 0.071822 Jy ! Component: 3950 - total flux cleaned = 0.0721677 Jy ! Component: 4000 - total flux cleaned = 0.0725547 Jy ! Component: 4050 - total flux cleaned = 0.073024 Jy ! Total flux subtracted in 4096 components = 0.0733207 Jy ! Clean residual min=-0.002560 max=0.002563 Jy/beam ! Clean residual mean=0.000014 rms=0.000898 Jy/beam ! Combined flux in latest and established models = 1.71782 Jy keep ! Adding 425 model components to the UV plane model. ! The established model now contains 517 components and 1.71782 Jy ![Exited script file: /opt64/bin/pima_mupet_02.dfm] wmap /vlbi/vcs9/uvm//J2225-0457_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.411 x 3.252 at -15.91 degrees (North through East) ! Clean map min=-0.0058214 max=0.92283 Jy/beam ! Writing clean map to FITS file: /vlbi/vcs9/uvm//J2225-0457_X_a_map.fits wmodel /vlbi/vcs9/uvm//J2225-0457_X_a_map.mod ! Writing 517 model components to file: /vlbi/vcs9/uvm//J2225-0457_X_a_map.mod wobs /vlbi/vcs9/uvm//J2225-0457_X_a_uvs.fits ! Writing UV FITS file: /vlbi/vcs9/uvm//J2225-0457_X_a_uvs.fits wwins /vlbi/vcs9/uvm//J2225-0457_X_a_map.win ! wwins: Wrote 3 windows to /vlbi/vcs9/uvm//J2225-0457_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.922835 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000892933 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.290279 0.290279 0.580559 1.16112 2.32224 4.64447 9.28894 18.5779 37.1558 74.3115 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0026 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.922 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1033.49 quit ! Quitting program ! Log file /vlbi/vcs9/uvm//J2225-0457_X_a_dfm.log closed on Tue Dec 26 23:10:46 2017