! Started logfile: /vlbi/vcs9/uvm//J2225-0457_C_a_dfm.log on Tue Dec 26 23:10:34 2017 float field_size field_size = 1024 float field_cell field_cell = 0.3000 float taper_size taper_size = 40.0 float freq freq = 4.12800 obs /vlbi/vcs9/uvm//J2225-0457_C_a_uvm.fits ! Reading UV FITS file: /vlbi/vcs9/uvm//J2225-0457_C_a_uvm.fits ! AN table 1: 43 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.820598 visibilities/baseline/integration-bin. ! Found source: J2225-0457 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 4.128e+09 3.2e+07 1 3.2e+07 ! 02 2 4.16e+09 3.2e+07 1 3.2e+07 ! 03 3 4.192e+09 3.2e+07 1 3.2e+07 ! 04 4 4.224e+09 3.2e+07 1 3.2e+07 ! 05 5 4.416e+09 3.2e+07 1 3.2e+07 ! 06 6 4.512e+09 3.2e+07 1 3.2e+07 ! 07 7 4.544e+09 3.2e+07 1 3.2e+07 ! 08 8 4.576e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 94 lines of history. ! ! Reading 7904 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 8 channels. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.3 print "taper_size =", taper_size ! taper_size = 40 ![@/opt64/bin/pima_mupet_02.dfm J2225-0457_C] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 60 float amp_soltime2 amp_soltime2 = 5 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.1 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_02.dvm version of 2017.12.26 === " ! === Difmap script: pima_mupet_02.dvm version of 2017.12.26 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 1.51008 Jy startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 50 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 50 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 50 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 50 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 50 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 50 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 50 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 50 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.809826Jy sigma=43.107377 ! Fit after self-cal, rms=0.693786Jy sigma=17.079286 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. peakwin win_mult ! Inverting map and beam ! Estimated beam: bmin=1.801 mas, bmaj=5.967 mas, bpa=-18.66 degrees ! Estimated noise=0.50856 mJy/beam. ! Added new window around map position (0, 0). flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.02711 Jy ! Component: 100 - total flux cleaned = 1.40509 Jy ! Total flux subtracted in 100 components = 1.40509 Jy ! Clean residual min=-0.059557 max=0.123400 Jy/beam ! Clean residual mean=-0.001403 rms=0.019376 Jy/beam ! Combined flux in latest and established models = 1.40509 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 1.40509 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.398636Jy sigma=9.860275 ! Fit after self-cal, rms=0.397546Jy sigma=9.843535 ! Inverting map ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.17668 Jy ! Component: 100 - total flux cleaned = 0.266642 Jy ! Total flux subtracted in 100 components = 0.266642 Jy ! Clean residual min=-0.032089 max=0.058601 Jy/beam ! Clean residual mean=-0.001080 rms=0.012045 Jy/beam ! Combined flux in latest and established models = 1.67174 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 23 components and 1.67174 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.272910Jy sigma=6.610926 ! Fit after self-cal, rms=0.272856Jy sigma=6.605703 ! Inverting map print "============== Finished uniform weighting CLEAN ==============" ! ============== Finished uniform weighting CLEAN ============== ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.448 mas, bmaj=6.108 mas, bpa=-16.23 degrees ! Estimated noise=0.333024 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.150638 Jy ! Component: 100 - total flux cleaned = 0.227103 Jy ! Component: 150 - total flux cleaned = 0.270543 Jy ! Component: 200 - total flux cleaned = 0.295716 Jy ! Total flux subtracted in 200 components = 0.295716 Jy ! Clean residual min=-0.051875 max=0.073160 Jy/beam ! Clean residual mean=-0.004246 rms=0.023099 Jy/beam ! Combined flux in latest and established models = 1.96745 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 44 model components to the UV plane model. ! The established model now contains 64 components and 1.96745 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.231921Jy sigma=5.039572 ! Fit after self-cal, rms=0.231878Jy sigma=5.034965 ! Inverting map print "============== Finished natural weighting CLEAN ==============" ! ============== Finished natural weighting CLEAN ============== ! gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00207 ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.03 KP 0.97 LA 0.94 ! MK 1.01 NL 1.13 OV 1.05 PT 0.93 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.987095 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.08 KP 0.98 LA 0.94 ! MK 1.02 NL 1.16 OV 1.06 PT 0.93 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.97744 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.09 KP 0.99 LA 0.94 ! MK 0.99 NL 1.19 OV 1.06 PT 0.93 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.980463 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.09 KP 0.99 LA 0.94 ! MK 1.03 NL 1.16 OV 1.08 PT 0.93 ! ! ! Correcting IF 5. ! Amplitude normalization factor in sub-array 1: 0.997432 ! Telescope amplitude corrections in sub-array 1: ! BR 0.83 FD 1.06 KP 0.98 LA 0.95 ! MK 1.05 NL 1.17 OV 1.06 PT 0.93 ! ! ! Correcting IF 6. ! Amplitude normalization factor in sub-array 1: 0.978141 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.04 KP 0.99 LA 0.94 ! MK 1.03 NL 1.18 OV 1.07 PT 0.93 ! ! ! Correcting IF 7. ! Amplitude normalization factor in sub-array 1: 0.973427 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.05 KP 0.99 LA 0.95 ! MK 1.04 NL 1.18 OV 1.06 PT 0.93 ! ! ! Correcting IF 8. ! Amplitude normalization factor in sub-array 1: 0.975223 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.04 KP 0.99 LA 0.95 ! MK 1.04 NL 1.17 OV 1.06 PT 0.93 ! ! ! Fit before self-cal, rms=0.231878Jy sigma=5.034965 ! Fit after self-cal, rms=0.183268Jy sigma=4.140159 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.183268Jy sigma=4.140159 ! Fit after self-cal, rms=0.183532Jy sigma=4.139316 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.496 mas, bmaj=6.026 mas, bpa=-15.75 degrees ! Estimated noise=0.32221 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3, 14.7). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0380648 Jy ! Component: 100 - total flux cleaned = 0.0330311 Jy ! Component: 150 - total flux cleaned = 0.0338786 Jy ! Component: 200 - total flux cleaned = 0.0337523 Jy ! Total flux subtracted in 200 components = 0.0337523 Jy ! Clean residual min=-0.036260 max=0.038631 Jy/beam ! Clean residual mean=-0.001156 rms=0.010473 Jy/beam ! Combined flux in latest and established models = 2.0012 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 50 model components to the UV plane model. ! The established model now contains 113 components and 2.0012 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.158667Jy sigma=3.464880 ! Fit after self-cal, rms=0.158592Jy sigma=3.456358 ! Inverting map print "============== Finished amplitude gscale SELF-CAL ==============" ! ============== Finished amplitude gscale SELF-CAL ============== ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.158592Jy sigma=3.456358 ! Fit after self-cal, rms=0.158292Jy sigma=3.447163 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00195848 Jy ! Component: 100 - total flux cleaned = -0.00235273 Jy ! Component: 150 - total flux cleaned = -0.00365023 Jy ! Component: 200 - total flux cleaned = -0.00423835 Jy ! Total flux subtracted in 200 components = -0.00423835 Jy ! Clean residual min=-0.036497 max=0.036301 Jy/beam ! Clean residual mean=-0.001182 rms=0.010268 Jy/beam ! Combined flux in latest and established models = 1.99696 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 140 components and 1.99696 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.156481Jy sigma=3.414020 ! Fit after self-cal, rms=0.156356Jy sigma=3.408686 ! Inverting map print "=== Finished natural weighting clean with shorter phase_soltime " ! === Finished natural weighting clean with shorter phase_soltime ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.496 x 6.026 at -15.75 degrees (North through East) ! Clean map min=-0.035552 max=1.2591 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "============== Finished amplitude self-cal ==============" end if ! Performing amp+phase self-cal over 60 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.156356Jy sigma=3.408686 ! Fit after self-cal, rms=0.099742Jy sigma=2.243117 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.099742Jy sigma=2.243117 ! Fit after self-cal, rms=0.099692Jy sigma=2.241673 ! Inverting map and beam ! Estimated beam: bmin=2.481 mas, bmaj=6.023 mas, bpa=-15.7 degrees ! Estimated noise=0.320475 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00229316 Jy ! Component: 100 - total flux cleaned = 0.001319 Jy ! Component: 150 - total flux cleaned = 0.000737134 Jy ! Component: 200 - total flux cleaned = 0.000477035 Jy ! Total flux subtracted in 200 components = 0.000477035 Jy ! Clean residual min=-0.032065 max=0.034796 Jy/beam ! Clean residual mean=-0.001078 rms=0.009033 Jy/beam ! Combined flux in latest and established models = 1.99744 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 159 components and 1.99744 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.097810Jy sigma=2.202556 ! Fit after self-cal, rms=0.097789Jy sigma=2.201019 ! Inverting map ! ============== Finished amplitude self-cal ============== print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.807 mas, bmaj=5.786 mas, bpa=-18.54 degrees ! Estimated noise=0.498872 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.00827 Jy ! Component: 100 - total flux cleaned = 1.38787 Jy ! Component: 150 - total flux cleaned = 1.57051 Jy ! Component: 200 - total flux cleaned = 1.66942 Jy ! Total flux subtracted in 200 components = 1.66942 Jy ! Clean residual min=-0.036909 max=0.043271 Jy/beam ! Clean residual mean=-0.000637 rms=0.009158 Jy/beam ! Combined flux in latest and established models = 1.66942 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 1.66942 Jy ! Inverting map and beam ! Estimated beam: bmin=2.481 mas, bmaj=6.023 mas, bpa=-15.7 degrees ! Estimated noise=0.320475 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.122199 Jy ! Component: 100 - total flux cleaned = 0.192639 Jy ! Component: 150 - total flux cleaned = 0.237009 Jy ! Component: 200 - total flux cleaned = 0.265735 Jy ! Total flux subtracted in 200 components = 0.265735 Jy ! Clean residual min=-0.033949 max=0.030892 Jy/beam ! Clean residual mean=-0.001709 rms=0.010245 Jy/beam ! Combined flux in latest and established models = 1.93515 Jy ! Adding 61 model components to the UV plane model. ! The established model now contains 86 components and 1.93515 Jy ! Inverting map clean ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0197471 Jy ! Component: 100 - total flux cleaned = 0.0331126 Jy ! Component: 150 - total flux cleaned = 0.0381125 Jy ! Component: 200 - total flux cleaned = 0.0419487 Jy ! Total flux subtracted in 200 components = 0.0419487 Jy ! Clean residual min=-0.031868 max=0.032395 Jy/beam ! Clean residual mean=-0.001291 rms=0.009221 Jy/beam ! Combined flux in latest and established models = 1.9771 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 106 components and 1.9771 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.094691Jy sigma=2.163639 ! Fit after self-cal, rms=0.094482Jy sigma=2.160818 wmodel J2225-0457_C_map.mod ! Writing 106 model components to file: J2225-0457_C_map.mod wobs J2225-0457_C_uvs.fits ! Writing UV FITS file: J2225-0457_C_uvs.fits wwins J2225-0457_C_map.win ! wwins: Wrote 2 windows to J2225-0457_C_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00102978 Jy ! Component: 100 - total flux cleaned = -0.00200219 Jy ! Component: 150 - total flux cleaned = -0.00239335 Jy ! Component: 200 - total flux cleaned = -0.00127238 Jy ! Component: 250 - total flux cleaned = -0.000237576 Jy ! Component: 300 - total flux cleaned = 0.000425828 Jy ! Component: 350 - total flux cleaned = -0.000449923 Jy ! Component: 400 - total flux cleaned = -0.00128519 Jy ! Component: 450 - total flux cleaned = -0.00232389 Jy ! Component: 500 - total flux cleaned = -0.00354072 Jy ! Component: 550 - total flux cleaned = -0.00445704 Jy ! Component: 600 - total flux cleaned = -0.00533326 Jy ! Component: 650 - total flux cleaned = -0.00637202 Jy ! Component: 700 - total flux cleaned = -0.00676558 Jy ! Component: 750 - total flux cleaned = -0.00731991 Jy ! Component: 800 - total flux cleaned = -0.007138 Jy ! Component: 850 - total flux cleaned = -0.00765501 Jy ! Component: 900 - total flux cleaned = -0.00765287 Jy ! Component: 950 - total flux cleaned = -0.00685756 Jy ! Component: 1000 - total flux cleaned = -0.00624448 Jy ! Component: 1050 - total flux cleaned = -0.0060952 Jy ! Component: 1100 - total flux cleaned = -0.00609401 Jy ! Component: 1150 - total flux cleaned = -0.00595148 Jy ! Component: 1200 - total flux cleaned = -0.00608762 Jy ! Component: 1250 - total flux cleaned = -0.00595509 Jy ! Component: 1300 - total flux cleaned = -0.00569786 Jy ! Component: 1350 - total flux cleaned = -0.00569855 Jy ! Component: 1400 - total flux cleaned = -0.0060661 Jy ! Component: 1450 - total flux cleaned = -0.00641995 Jy ! Component: 1500 - total flux cleaned = -0.00688262 Jy ! Component: 1550 - total flux cleaned = -0.00699084 Jy ! Component: 1600 - total flux cleaned = -0.00721236 Jy ! Component: 1650 - total flux cleaned = -0.00710518 Jy ! Component: 1700 - total flux cleaned = -0.0076367 Jy ! Component: 1750 - total flux cleaned = -0.00732445 Jy ! Component: 1800 - total flux cleaned = -0.00794305 Jy ! Component: 1850 - total flux cleaned = -0.00864457 Jy ! Component: 1900 - total flux cleaned = -0.00864385 Jy ! Component: 1950 - total flux cleaned = -0.00922478 Jy ! Component: 2000 - total flux cleaned = -0.00941456 Jy ! Component: 2050 - total flux cleaned = -0.00988276 Jy ! Component: 2100 - total flux cleaned = -0.0102519 Jy ! Component: 2150 - total flux cleaned = -0.0106116 Jy ! Component: 2200 - total flux cleaned = -0.0106105 Jy ! Component: 2250 - total flux cleaned = -0.0106984 Jy ! Component: 2300 - total flux cleaned = -0.0112173 Jy ! Component: 2350 - total flux cleaned = -0.0118143 Jy ! Component: 2400 - total flux cleaned = -0.0123174 Jy ! Component: 2450 - total flux cleaned = -0.0125663 Jy ! Component: 2500 - total flux cleaned = -0.0132214 Jy ! Component: 2550 - total flux cleaned = -0.013706 Jy ! Component: 2600 - total flux cleaned = -0.0142643 Jy ! Component: 2650 - total flux cleaned = -0.0148157 Jy ! Component: 2700 - total flux cleaned = -0.015126 Jy ! Component: 2750 - total flux cleaned = -0.0152808 Jy ! Component: 2800 - total flux cleaned = -0.0158134 Jy ! Component: 2850 - total flux cleaned = -0.0160385 Jy ! Component: 2900 - total flux cleaned = -0.0165581 Jy ! Component: 2950 - total flux cleaned = -0.0166315 Jy ! Component: 3000 - total flux cleaned = -0.0169952 Jy ! Component: 3050 - total flux cleaned = -0.0173538 Jy ! Component: 3100 - total flux cleaned = -0.0176369 Jy ! Component: 3150 - total flux cleaned = -0.017778 Jy ! Component: 3200 - total flux cleaned = -0.0180565 Jy ! Component: 3250 - total flux cleaned = -0.0186053 Jy ! Component: 3300 - total flux cleaned = -0.0187407 Jy ! Component: 3350 - total flux cleaned = -0.0189429 Jy ! Component: 3400 - total flux cleaned = -0.0192099 Jy ! Component: 3450 - total flux cleaned = -0.0195394 Jy ! Component: 3500 - total flux cleaned = -0.019801 Jy ! Component: 3550 - total flux cleaned = -0.0201235 Jy ! Component: 3600 - total flux cleaned = -0.0203797 Jy ! Component: 3650 - total flux cleaned = -0.0207599 Jy ! Component: 3700 - total flux cleaned = -0.0208859 Jy ! Component: 3750 - total flux cleaned = -0.021384 Jy ! Component: 3800 - total flux cleaned = -0.0220628 Jy ! Component: 3850 - total flux cleaned = -0.0223682 Jy ! Component: 3900 - total flux cleaned = -0.0229147 Jy ! Component: 3950 - total flux cleaned = -0.0235172 Jy ! Component: 4000 - total flux cleaned = -0.0239352 Jy ! Component: 4050 - total flux cleaned = -0.0247055 Jy ! Total flux subtracted in 4096 components = -0.0251762 Jy ! Clean residual min=-0.003347 max=0.003298 Jy/beam ! Clean residual mean=-0.000147 rms=0.001239 Jy/beam ! Combined flux in latest and established models = 1.95192 Jy keep ! Adding 455 model components to the UV plane model. ! The established model now contains 561 components and 1.95192 Jy ![Exited script file: /opt64/bin/pima_mupet_02.dfm] wmap /vlbi/vcs9/uvm//J2225-0457_C_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.481 x 6.023 at -15.7 degrees (North through East) ! Clean map min=-0.010044 max=1.2889 Jy/beam ! Writing clean map to FITS file: /vlbi/vcs9/uvm//J2225-0457_C_a_map.fits wmodel /vlbi/vcs9/uvm//J2225-0457_C_a_map.mod ! Writing 561 model components to file: /vlbi/vcs9/uvm//J2225-0457_C_a_map.mod wobs /vlbi/vcs9/uvm//J2225-0457_C_a_uvs.fits ! Writing UV FITS file: /vlbi/vcs9/uvm//J2225-0457_C_a_uvs.fits wwins /vlbi/vcs9/uvm//J2225-0457_C_a_map.win ! wwins: Wrote 3 windows to /vlbi/vcs9/uvm//J2225-0457_C_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 1.28891 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00124713 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.290274 0.290274 0.580547 1.16109 2.32219 4.64438 9.28876 18.5775 37.155 74.3101 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0037 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.288 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1033.51 quit ! Quitting program ! Log file /vlbi/vcs9/uvm//J2225-0457_C_a_dfm.log closed on Tue Dec 26 23:10:37 2017