! Started logfile: /vlbi/vcs9/uvm//J2223+6547_C_a_dfm.log on Tue Dec 26 23:10:14 2017 float field_size field_size = 1024 float field_cell field_cell = 0.3000 float taper_size taper_size = 40.0 float freq freq = 4.12800 obs /vlbi/vcs9/uvm//J2223+6547_C_a_uvm.fits ! Reading UV FITS file: /vlbi/vcs9/uvm//J2223+6547_C_a_uvm.fits ! AN table 1: 110 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.998182 visibilities/baseline/integration-bin. ! Found source: J2223+6547 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 4.128e+09 3.2e+07 1 3.2e+07 ! 02 2 4.16e+09 3.2e+07 1 3.2e+07 ! 03 3 4.192e+09 3.2e+07 1 3.2e+07 ! 04 4 4.224e+09 3.2e+07 1 3.2e+07 ! 05 5 4.416e+09 3.2e+07 1 3.2e+07 ! 06 6 4.512e+09 3.2e+07 1 3.2e+07 ! 07 7 4.544e+09 3.2e+07 1 3.2e+07 ! 08 8 4.576e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 94 lines of history. ! ! Reading 39528 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 8 channels. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.3 print "taper_size =", taper_size ! taper_size = 40 ![@/opt64/bin/pima_mupet_02.dfm J2223+6547_C] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 60 float amp_soltime2 amp_soltime2 = 5 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.1 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_02.dvm version of 2017.12.26 === " ! === Difmap script: pima_mupet_02.dvm version of 2017.12.26 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.0278825 Jy startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.000505Jy sigma=31.250479 ! Fit after self-cal, rms=0.988549Jy sigma=30.868147 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. peakwin win_mult ! Inverting map and beam ! Estimated beam: bmin=1.38 mas, bmaj=2.276 mas, bpa=-6.273 degrees ! Estimated noise=0.269001 mJy/beam. ! Added new window around map position (0, 0). flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00946537 Jy ! Component: 100 - total flux cleaned = 0.0119957 Jy ! Total flux subtracted in 100 components = 0.0119957 Jy ! Clean residual min=-0.001011 max=0.001188 Jy/beam ! Clean residual mean=0.000001 rms=0.000240 Jy/beam ! Combined flux in latest and established models = 0.0119957 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.0119957 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.025204Jy sigma=0.755396 ! Fit after self-cal, rms=0.025181Jy sigma=0.754632 ! Inverting map print "============== Finished uniform weighting CLEAN ==============" ! ============== Finished uniform weighting CLEAN ============== ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.922 mas, bmaj=2.983 mas, bpa=-8.27 degrees ! Estimated noise=0.113865 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.5, 0.6). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00158868 Jy ! Component: 100 - total flux cleaned = 0.00227517 Jy ! Component: 150 - total flux cleaned = 0.00251421 Jy ! Component: 200 - total flux cleaned = 0.00264041 Jy ! Total flux subtracted in 200 components = 0.00264041 Jy ! Clean residual min=-0.000648 max=0.000605 Jy/beam ! Clean residual mean=0.000001 rms=0.000149 Jy/beam ! Combined flux in latest and established models = 0.0146361 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 32 model components to the UV plane model. ! The established model now contains 42 components and 0.0146361 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.025118Jy sigma=0.752395 ! Fit after self-cal, rms=0.025116Jy sigma=0.752336 ! Inverting map print "============== Finished natural weighting CLEAN ==============" ! ============== Finished natural weighting CLEAN ============== ! gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00744 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.88 HN 1.00 KP 0.86 ! LA 1.01 MK 1.20 NL 1.13 OV 0.95 ! PT 0.99 SC 0.89 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.00482 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.87 HN 0.98 KP 1.05 ! LA 1.02 MK 0.90 NL 1.04 OV 1.02 ! PT 1.13 SC 0.98 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.907853 ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 1.05 HN 1.13 KP 1.10 ! LA 1.19 MK 1.06 NL 0.99 OV 1.26 ! PT 1.23 SC 1.11 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.06311 ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.88 HN 0.91 KP 1.02 ! LA 0.92 MK 0.95 NL 0.96 OV 0.91 ! PT 0.88 SC 0.87 ! ! ! Correcting IF 5. ! Amplitude normalization factor in sub-array 1: 0.998007 ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 1.20 HN 0.94 KP 1.09 ! LA 0.91 MK 0.91 NL 0.95 OV 1.10 ! PT 1.08 SC 0.97 ! ! ! Correcting IF 6. ! Amplitude normalization factor in sub-array 1: 0.966478 ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.95 HN 1.04 KP 1.01 ! LA 1.12 MK 1.11 NL 1.10 OV 1.02 ! PT 1.06 SC 1.03 ! ! ! Correcting IF 7. ! Amplitude normalization factor in sub-array 1: 1.05153 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.97 HN 0.89 KP 0.97 ! LA 0.81 MK 1.00 NL 0.89 OV 1.03 ! PT 1.08 SC 0.93 ! ! ! Correcting IF 8. ! Amplitude normalization factor in sub-array 1: 0.960042 ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.89 HN 1.10 KP 1.11 ! LA 0.82 MK 1.10 NL 1.13 OV 1.06 ! PT 1.02 SC 1.10 ! ! ! Fit before self-cal, rms=0.025116Jy sigma=0.752336 ! Fit after self-cal, rms=0.025240Jy sigma=0.750965 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.025240Jy sigma=0.750965 ! Fit after self-cal, rms=0.025241Jy sigma=0.750934 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.94 mas, bmaj=2.989 mas, bpa=-7.619 degrees ! Estimated noise=0.11073 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 6.19616e-05 Jy ! Component: 100 - total flux cleaned = 7.09397e-05 Jy ! Component: 150 - total flux cleaned = 7.78386e-05 Jy ! Component: 200 - total flux cleaned = 7.74408e-05 Jy ! Total flux subtracted in 200 components = 7.74408e-05 Jy ! Clean residual min=-0.000587 max=0.000532 Jy/beam ! Clean residual mean=0.000001 rms=0.000135 Jy/beam ! Combined flux in latest and established models = 0.0147136 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 58 components and 0.0147136 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.025237Jy sigma=0.750783 ! Fit after self-cal, rms=0.025237Jy sigma=0.750756 ! Inverting map print "============== Finished amplitude gscale SELF-CAL ==============" ! ============== Finished amplitude gscale SELF-CAL ============== ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.025237Jy sigma=0.750756 ! Fit after self-cal, rms=0.025172Jy sigma=0.748432 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000129321 Jy ! Component: 100 - total flux cleaned = 0.000146097 Jy ! Component: 150 - total flux cleaned = 0.000160696 Jy ! Component: 200 - total flux cleaned = 0.000169463 Jy ! Total flux subtracted in 200 components = 0.000169463 Jy ! Clean residual min=-0.000571 max=0.000494 Jy/beam ! Clean residual mean=0.000001 rms=0.000132 Jy/beam ! Combined flux in latest and established models = 0.014883 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 75 components and 0.014883 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.025170Jy sigma=0.748377 ! Fit after self-cal, rms=0.025165Jy sigma=0.748133 ! Inverting map print "=== Finished natural weighting clean with shorter phase_soltime " ! === Finished natural weighting clean with shorter phase_soltime ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.94 x 2.989 at -7.619 degrees (North through East) ! Clean map min=-0.00054942 max=0.01149 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "============== Finished amplitude self-cal ==============" end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.383 mas, bmaj=2.279 mas, bpa=-5.845 degrees ! Estimated noise=0.265272 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00946984 Jy ! Component: 100 - total flux cleaned = 0.0120524 Jy ! Component: 150 - total flux cleaned = 0.0133324 Jy ! Component: 200 - total flux cleaned = 0.0136495 Jy ! Total flux subtracted in 200 components = 0.0136495 Jy ! Clean residual min=-0.000901 max=0.000967 Jy/beam ! Clean residual mean=0.000001 rms=0.000222 Jy/beam ! Combined flux in latest and established models = 0.0136495 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.0136495 Jy ! Inverting map and beam ! Estimated beam: bmin=1.94 mas, bmaj=2.989 mas, bpa=-7.619 degrees ! Estimated noise=0.11073 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (15.9, 64.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00078185 Jy ! Component: 100 - total flux cleaned = 0.00124072 Jy ! Component: 150 - total flux cleaned = 0.00154894 Jy ! Component: 200 - total flux cleaned = 0.00171397 Jy ! Total flux subtracted in 200 components = 0.00171397 Jy ! Clean residual min=-0.000558 max=0.000518 Jy/beam ! Clean residual mean=0.000001 rms=0.000125 Jy/beam ! Combined flux in latest and established models = 0.0153635 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 58 components and 0.0153635 Jy ! Inverting map clean ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 7.82698e-05 Jy ! Component: 100 - total flux cleaned = 0.000139403 Jy ! Component: 150 - total flux cleaned = 0.000173416 Jy ! Component: 200 - total flux cleaned = 0.000204136 Jy ! Total flux subtracted in 200 components = 0.000204136 Jy ! Clean residual min=-0.000545 max=0.000499 Jy/beam ! Clean residual mean=0.000001 rms=0.000122 Jy/beam ! Combined flux in latest and established models = 0.0155676 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 32 model components to the UV plane model. ! The established model now contains 71 components and 0.0155676 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.025158Jy sigma=0.747870 ! Fit after self-cal, rms=0.025159Jy sigma=0.747789 wmodel J2223+6547_C_map.mod ! Writing 71 model components to file: J2223+6547_C_map.mod wobs J2223+6547_C_uvs.fits ! Writing UV FITS file: J2223+6547_C_uvs.fits wwins J2223+6547_C_map.win ! wwins: Wrote 3 windows to J2223+6547_C_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -7.55537e-05 Jy ! Component: 100 - total flux cleaned = -8.40102e-05 Jy ! Component: 150 - total flux cleaned = -0.00010714 Jy ! Component: 200 - total flux cleaned = -0.000121807 Jy ! Component: 250 - total flux cleaned = -0.000143216 Jy ! Component: 300 - total flux cleaned = -0.00015007 Jy ! Component: 350 - total flux cleaned = -0.000149927 Jy ! Component: 400 - total flux cleaned = -0.000123385 Jy ! Component: 450 - total flux cleaned = -0.000104038 Jy ! Component: 500 - total flux cleaned = -9.15193e-05 Jy ! Component: 550 - total flux cleaned = -6.6848e-05 Jy ! Component: 600 - total flux cleaned = -6.69627e-05 Jy ! Component: 650 - total flux cleaned = -5.50598e-05 Jy ! Component: 700 - total flux cleaned = -6.67986e-05 Jy ! Component: 750 - total flux cleaned = -5.53369e-05 Jy ! Component: 800 - total flux cleaned = -6.6708e-05 Jy ! Component: 850 - total flux cleaned = -9.45675e-05 Jy ! Component: 900 - total flux cleaned = -0.000105526 Jy ! Component: 950 - total flux cleaned = -0.000121663 Jy ! Component: 1000 - total flux cleaned = -0.000116332 Jy ! Component: 1050 - total flux cleaned = -0.000126869 Jy ! Component: 1100 - total flux cleaned = -0.000152795 Jy ! Component: 1150 - total flux cleaned = -0.000147657 Jy ! Component: 1200 - total flux cleaned = -0.000167855 Jy ! Component: 1250 - total flux cleaned = -0.000177695 Jy ! Component: 1300 - total flux cleaned = -0.000172751 Jy ! Component: 1350 - total flux cleaned = -0.000211851 Jy ! Component: 1400 - total flux cleaned = -0.000202138 Jy ! Component: 1450 - total flux cleaned = -0.000226012 Jy ! Component: 1500 - total flux cleaned = -0.000221251 Jy ! Component: 1550 - total flux cleaned = -0.000221288 Jy ! Component: 1600 - total flux cleaned = -0.000244427 Jy ! Component: 1650 - total flux cleaned = -0.000253548 Jy ! Component: 1700 - total flux cleaned = -0.000258039 Jy ! Component: 1750 - total flux cleaned = -0.000280561 Jy ! Component: 1800 - total flux cleaned = -0.000293846 Jy ! Component: 1850 - total flux cleaned = -0.000289469 Jy ! Component: 1900 - total flux cleaned = -0.000306914 Jy ! Component: 1950 - total flux cleaned = -0.000315553 Jy ! Component: 2000 - total flux cleaned = -0.000315524 Jy ! Component: 2050 - total flux cleaned = -0.00032829 Jy ! Component: 2100 - total flux cleaned = -0.000345158 Jy ! Component: 2150 - total flux cleaned = -0.000357726 Jy ! Component: 2200 - total flux cleaned = -0.000378418 Jy ! Component: 2250 - total flux cleaned = -0.000390749 Jy ! Component: 2300 - total flux cleaned = -0.000394852 Jy ! Component: 2350 - total flux cleaned = -0.000419165 Jy ! Component: 2400 - total flux cleaned = -0.00042721 Jy ! Component: 2450 - total flux cleaned = -0.00045911 Jy ! Component: 2500 - total flux cleaned = -0.000474938 Jy ! Component: 2550 - total flux cleaned = -0.000482777 Jy ! Component: 2600 - total flux cleaned = -0.00051005 Jy ! Component: 2650 - total flux cleaned = -0.000525457 Jy ! Component: 2700 - total flux cleaned = -0.000533115 Jy ! Component: 2750 - total flux cleaned = -0.000548308 Jy ! Component: 2800 - total flux cleaned = -0.000555939 Jy ! Component: 2850 - total flux cleaned = -0.0005785 Jy ! Component: 2900 - total flux cleaned = -0.000589733 Jy ! Component: 2950 - total flux cleaned = -0.000611933 Jy ! Component: 3000 - total flux cleaned = -0.000630319 Jy ! Component: 3050 - total flux cleaned = -0.000641242 Jy ! Component: 3100 - total flux cleaned = -0.000663057 Jy ! Component: 3150 - total flux cleaned = -0.000681108 Jy ! Component: 3200 - total flux cleaned = -0.000699048 Jy ! Component: 3250 - total flux cleaned = -0.000727566 Jy ! Component: 3300 - total flux cleaned = -0.000748812 Jy ! Component: 3350 - total flux cleaned = -0.00075935 Jy ! Component: 3400 - total flux cleaned = -0.000783847 Jy ! Component: 3450 - total flux cleaned = -0.000794245 Jy ! Component: 3500 - total flux cleaned = -0.000825353 Jy ! Component: 3550 - total flux cleaned = -0.000852798 Jy ! Component: 3600 - total flux cleaned = -0.000845981 Jy ! Component: 3650 - total flux cleaned = -0.000866376 Jy ! Component: 3700 - total flux cleaned = -0.000906869 Jy ! Component: 3750 - total flux cleaned = -0.000930353 Jy ! Component: 3800 - total flux cleaned = -0.00096035 Jy ! Component: 3850 - total flux cleaned = -0.000983572 Jy ! Component: 3900 - total flux cleaned = -0.00098689 Jy ! Component: 3950 - total flux cleaned = -0.00100987 Jy ! Component: 4000 - total flux cleaned = -0.00103276 Jy ! Component: 4050 - total flux cleaned = -0.00106201 Jy ! Total flux subtracted in 4096 components = -0.0010814 Jy ! Clean residual min=-0.000180 max=0.000182 Jy/beam ! Clean residual mean=0.000000 rms=0.000060 Jy/beam ! Combined flux in latest and established models = 0.0144862 Jy keep ! Adding 320 model components to the UV plane model. ! The established model now contains 391 components and 0.0144862 Jy ![Exited script file: /opt64/bin/pima_mupet_02.dfm] wmap /vlbi/vcs9/uvm//J2223+6547_C_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.94 x 2.989 at -7.619 degrees (North through East) ! Clean map min=-0.00034341 max=0.011438 Jy/beam ! Writing clean map to FITS file: /vlbi/vcs9/uvm//J2223+6547_C_a_map.fits wmodel /vlbi/vcs9/uvm//J2223+6547_C_a_map.mod ! Writing 391 model components to file: /vlbi/vcs9/uvm//J2223+6547_C_a_map.mod wobs /vlbi/vcs9/uvm//J2223+6547_C_a_uvs.fits ! Writing UV FITS file: /vlbi/vcs9/uvm//J2223+6547_C_a_uvs.fits wwins /vlbi/vcs9/uvm//J2223+6547_C_a_map.win ! wwins: Wrote 4 windows to /vlbi/vcs9/uvm//J2223+6547_C_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0114378 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 5.93181e-05 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.55584 1.55584 3.11168 6.22336 12.4467 24.8934 49.7869 99.5737 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0001 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.011 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 192.821 quit ! Quitting program ! Log file /vlbi/vcs9/uvm//J2223+6547_C_a_dfm.log closed on Tue Dec 26 23:10:18 2017