! Started logfile: /vlbi/vcs9/uvm//J2218-0335_X_a_dfm.log on Tue Dec 26 23:09:34 2017 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 7.39200 obs /vlbi/vcs9/uvm//J2218-0335_X_a_uvm.fits ! Reading UV FITS file: /vlbi/vcs9/uvm//J2218-0335_X_a_uvm.fits ! AN table 1: 42 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.887755 visibilities/baseline/integration-bin. ! Found source: J2218-0335 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 7.392e+09 3.2e+07 1 3.2e+07 ! 02 2 7.424e+09 3.2e+07 1 3.2e+07 ! 03 3 7.456e+09 3.2e+07 1 3.2e+07 ! 04 4 7.552e+09 3.2e+07 1 3.2e+07 ! 05 5 7.744e+09 3.2e+07 1 3.2e+07 ! 06 6 7.776e+09 3.2e+07 1 3.2e+07 ! 07 7 7.808e+09 3.2e+07 1 3.2e+07 ! 08 8 7.84e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 76 lines of history. ! ! Reading 8352 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 8 channels. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_02.dfm J2218-0335_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 60 float amp_soltime2 amp_soltime2 = 5 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.1 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_02.dvm version of 2017.12.26 === " ! === Difmap script: pima_mupet_02.dvm version of 2017.12.26 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.838977 Jy startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.307628Jy sigma=31.954230 ! Fit after self-cal, rms=0.401644Jy sigma=9.421031 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. peakwin win_mult ! Inverting map and beam ! Estimated beam: bmin=0.8225 mas, bmaj=3.453 mas, bpa=-15.6 degrees ! Estimated noise=0.441684 mJy/beam. ! Added new window around map position (0, 0). flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.67256 Jy ! Component: 100 - total flux cleaned = 0.914029 Jy ! Total flux subtracted in 100 components = 0.914029 Jy ! Clean residual min=-0.049466 max=0.086411 Jy/beam ! Clean residual mean=-0.000017 rms=0.015064 Jy/beam ! Combined flux in latest and established models = 0.914029 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.914029 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.165899Jy sigma=4.092369 ! Fit after self-cal, rms=0.165684Jy sigma=4.086932 ! Inverting map print "============== Finished uniform weighting CLEAN ==============" ! ============== Finished uniform weighting CLEAN ============== ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9994 mas, bmaj=3.533 mas, bpa=-16.13 degrees ! Estimated noise=0.323633 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.136218 Jy ! Component: 100 - total flux cleaned = 0.199796 Jy ! Component: 150 - total flux cleaned = 0.234999 Jy ! Component: 200 - total flux cleaned = 0.253993 Jy ! Total flux subtracted in 200 components = 0.253993 Jy ! Clean residual min=-0.020146 max=0.020204 Jy/beam ! Clean residual mean=0.000013 rms=0.004626 Jy/beam ! Combined flux in latest and established models = 1.16802 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 41 model components to the UV plane model. ! The established model now contains 48 components and 1.16802 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.065117Jy sigma=1.523736 ! Fit after self-cal, rms=0.065016Jy sigma=1.521753 ! Inverting map print "============== Finished natural weighting CLEAN ==============" ! ============== Finished natural weighting CLEAN ============== ! gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.00775 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.99 HN 0.97 KP 1.00 ! LA 0.96 MK 1.00 NL 1.03 OV 0.99 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.00515 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.99 HN 0.98 KP 1.00 ! LA 0.96 MK 1.00 NL 1.02 OV 0.99 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.00221 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.99 HN 0.98 KP 1.01 ! LA 0.96 MK 1.02 NL 1.02 OV 1.00 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.00397 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.98 HN 0.99 KP 1.00 ! LA 0.96 MK 1.00 NL 1.03 OV 1.00 ! ! ! Correcting IF 5. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.00561 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.99 HN 0.99 KP 1.00 ! LA 0.96 MK 0.97 NL 1.03 OV 0.99 ! ! ! Correcting IF 6. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.00416 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.99 HN 1.01 KP 1.01 ! LA 0.96 MK 0.96 NL 1.03 OV 0.99 ! ! ! Correcting IF 7. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.00564 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.98 HN 1.00 KP 1.01 ! LA 0.96 MK 0.97 NL 1.04 OV 0.99 ! ! ! Correcting IF 8. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.00506 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.98 HN 1.00 KP 1.01 ! LA 0.95 MK 0.98 NL 1.03 OV 1.00 ! ! ! Fit before self-cal, rms=0.065016Jy sigma=1.521753 ! Fit after self-cal, rms=0.059803Jy sigma=1.407004 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.059803Jy sigma=1.407004 ! Fit after self-cal, rms=0.059804Jy sigma=1.406992 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9984 mas, bmaj=3.577 mas, bpa=-16.13 degrees ! Estimated noise=0.324268 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0079379 Jy ! Component: 100 - total flux cleaned = -0.0055761 Jy ! Component: 150 - total flux cleaned = -0.00401735 Jy ! Component: 200 - total flux cleaned = -0.00235059 Jy ! Total flux subtracted in 200 components = -0.00235059 Jy ! Clean residual min=-0.013318 max=0.012336 Jy/beam ! Clean residual mean=0.000004 rms=0.003092 Jy/beam ! Combined flux in latest and established models = 1.16567 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 60 components and 1.16567 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.055036Jy sigma=1.275230 ! Fit after self-cal, rms=0.054987Jy sigma=1.274409 ! Inverting map print "============== Finished amplitude gscale SELF-CAL ==============" ! ============== Finished amplitude gscale SELF-CAL ============== ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.054987Jy sigma=1.274409 ! Fit after self-cal, rms=0.054913Jy sigma=1.272882 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00128062 Jy ! Component: 100 - total flux cleaned = 0.00230462 Jy ! Component: 150 - total flux cleaned = 0.00297898 Jy ! Component: 200 - total flux cleaned = 0.00297172 Jy ! Total flux subtracted in 200 components = 0.00297172 Jy ! Clean residual min=-0.011602 max=0.011913 Jy/beam ! Clean residual mean=0.000005 rms=0.002890 Jy/beam ! Combined flux in latest and established models = 1.16864 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 69 components and 1.16864 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.053662Jy sigma=1.237959 ! Fit after self-cal, rms=0.053604Jy sigma=1.236766 ! Inverting map print "=== Finished natural weighting clean with shorter phase_soltime " ! === Finished natural weighting clean with shorter phase_soltime ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9984 x 3.577 at -16.13 degrees (North through East) ! Clean map min=-0.01591 max=0.70381 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "============== Finished amplitude self-cal ==============" end if ! Performing amp+phase self-cal over 60 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.053604Jy sigma=1.236766 ! Fit after self-cal, rms=0.048293Jy sigma=1.086384 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.048293Jy sigma=1.086384 ! Fit after self-cal, rms=0.048286Jy sigma=1.086257 ! Inverting map and beam ! Estimated beam: bmin=1.01 mas, bmaj=3.572 mas, bpa=-16 degrees ! Estimated noise=0.325417 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00388749 Jy ! Component: 100 - total flux cleaned = -0.00413513 Jy ! Component: 150 - total flux cleaned = -0.00455765 Jy ! Component: 200 - total flux cleaned = -0.00437085 Jy ! Total flux subtracted in 200 components = -0.00437085 Jy ! Clean residual min=-0.010955 max=0.010614 Jy/beam ! Clean residual mean=0.000003 rms=0.002693 Jy/beam ! Combined flux in latest and established models = 1.16427 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 73 components and 1.16427 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.047027Jy sigma=1.052720 ! Fit after self-cal, rms=0.047002Jy sigma=1.052270 ! Inverting map ! ============== Finished amplitude self-cal ============== print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.824 mas, bmaj=3.463 mas, bpa=-15.57 degrees ! Estimated noise=0.445084 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.675653 Jy ! Component: 100 - total flux cleaned = 0.917714 Jy ! Component: 150 - total flux cleaned = 1.03263 Jy ! Component: 200 - total flux cleaned = 1.09287 Jy ! Total flux subtracted in 200 components = 1.09287 Jy ! Clean residual min=-0.031342 max=0.030914 Jy/beam ! Clean residual mean=-0.000010 rms=0.006747 Jy/beam ! Combined flux in latest and established models = 1.09287 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 32 model components to the UV plane model. ! The established model now contains 32 components and 1.09287 Jy ! Inverting map and beam ! Estimated beam: bmin=1.01 mas, bmaj=3.572 mas, bpa=-16 degrees ! Estimated noise=0.325417 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-19.8, 24.6). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0415168 Jy ! Component: 100 - total flux cleaned = 0.0527762 Jy ! Component: 150 - total flux cleaned = 0.0564686 Jy ! Component: 200 - total flux cleaned = 0.060697 Jy ! Total flux subtracted in 200 components = 0.060697 Jy ! Clean residual min=-0.015164 max=0.012740 Jy/beam ! Clean residual mean=-0.000001 rms=0.003384 Jy/beam ! Combined flux in latest and established models = 1.15356 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 64 components and 1.15356 Jy ! Inverting map clean ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00355927 Jy ! Component: 100 - total flux cleaned = 0.00617434 Jy ! Component: 150 - total flux cleaned = 0.00729955 Jy ! Component: 200 - total flux cleaned = 0.0079627 Jy ! Total flux subtracted in 200 components = 0.0079627 Jy ! Clean residual min=-0.012210 max=0.011061 Jy/beam ! Clean residual mean=0.000000 rms=0.002815 Jy/beam ! Combined flux in latest and established models = 1.16153 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 76 components and 1.16153 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.047671Jy sigma=1.070392 ! Fit after self-cal, rms=0.047556Jy sigma=1.068210 wmodel J2218-0335_X_map.mod ! Writing 76 model components to file: J2218-0335_X_map.mod wobs J2218-0335_X_uvs.fits ! Writing UV FITS file: J2218-0335_X_uvs.fits wwins J2218-0335_X_map.win ! wwins: Wrote 2 windows to J2218-0335_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00272147 Jy ! Component: 100 - total flux cleaned = -0.00333779 Jy ! Component: 150 - total flux cleaned = -0.00332977 Jy ! Component: 200 - total flux cleaned = -0.00315173 Jy ! Component: 250 - total flux cleaned = -0.00315768 Jy ! Component: 300 - total flux cleaned = -0.00300654 Jy ! Component: 350 - total flux cleaned = -0.0027126 Jy ! Component: 400 - total flux cleaned = -0.00257385 Jy ! Component: 450 - total flux cleaned = -0.00217365 Jy ! Component: 500 - total flux cleaned = -0.00191924 Jy ! Component: 550 - total flux cleaned = -0.00167323 Jy ! Component: 600 - total flux cleaned = -0.00120912 Jy ! Component: 650 - total flux cleaned = -0.000879205 Jy ! Component: 700 - total flux cleaned = -0.000562612 Jy ! Component: 750 - total flux cleaned = -0.000258988 Jy ! Component: 800 - total flux cleaned = 0.000127185 Jy ! Component: 850 - total flux cleaned = 0.000219131 Jy ! Component: 900 - total flux cleaned = 0.000218291 Jy ! Component: 950 - total flux cleaned = 0.000304631 Jy ! Component: 1000 - total flux cleaned = 0.000388227 Jy ! Component: 1050 - total flux cleaned = 0.000310003 Jy ! Component: 1100 - total flux cleaned = 0.000536798 Jy ! Component: 1150 - total flux cleaned = 0.000537799 Jy ! Component: 1200 - total flux cleaned = 0.000894331 Jy ! Component: 1250 - total flux cleaned = 0.00117008 Jy ! Component: 1300 - total flux cleaned = 0.00143742 Jy ! Component: 1350 - total flux cleaned = 0.00163258 Jy ! Component: 1400 - total flux cleaned = 0.00182158 Jy ! Component: 1450 - total flux cleaned = 0.00200572 Jy ! Component: 1500 - total flux cleaned = 0.0022433 Jy ! Component: 1550 - total flux cleaned = 0.00235758 Jy ! Component: 1600 - total flux cleaned = 0.00252607 Jy ! Component: 1650 - total flux cleaned = 0.0026365 Jy ! Component: 1700 - total flux cleaned = 0.00284763 Jy ! Component: 1750 - total flux cleaned = 0.00284773 Jy ! Component: 1800 - total flux cleaned = 0.00274749 Jy ! Component: 1850 - total flux cleaned = 0.00269788 Jy ! Component: 1900 - total flux cleaned = 0.00250751 Jy ! Component: 1950 - total flux cleaned = 0.00236825 Jy ! Component: 2000 - total flux cleaned = 0.00218541 Jy ! Component: 2050 - total flux cleaned = 0.00205137 Jy ! Component: 2100 - total flux cleaned = 0.00192083 Jy ! Component: 2150 - total flux cleaned = 0.00179279 Jy ! Component: 2200 - total flux cleaned = 0.00158396 Jy ! Component: 2250 - total flux cleaned = 0.0013787 Jy ! Component: 2300 - total flux cleaned = 0.00117867 Jy ! Component: 2350 - total flux cleaned = 0.00109999 Jy ! Component: 2400 - total flux cleaned = 0.000982706 Jy ! Component: 2450 - total flux cleaned = 0.000830918 Jy ! Component: 2500 - total flux cleaned = 0.000719208 Jy ! Component: 2550 - total flux cleaned = 0.000462374 Jy ! Component: 2600 - total flux cleaned = 0.000354121 Jy ! Component: 2650 - total flux cleaned = 0.000282813 Jy ! Component: 2700 - total flux cleaned = 0.000317584 Jy ! Component: 2750 - total flux cleaned = 0.000213848 Jy ! Component: 2800 - total flux cleaned = 0.00011187 Jy ! Component: 2850 - total flux cleaned = 4.4611e-05 Jy ! Component: 2900 - total flux cleaned = -8.86458e-05 Jy ! Component: 2950 - total flux cleaned = -0.000121163 Jy ! Component: 3000 - total flux cleaned = -0.000218833 Jy ! Component: 3050 - total flux cleaned = -0.00028319 Jy ! Component: 3100 - total flux cleaned = -0.000347721 Jy ! Component: 3150 - total flux cleaned = -0.000474871 Jy ! Component: 3200 - total flux cleaned = -0.000537535 Jy ! Component: 3250 - total flux cleaned = -0.000631119 Jy ! Component: 3300 - total flux cleaned = -0.000754756 Jy ! Component: 3350 - total flux cleaned = -0.000938823 Jy ! Component: 3400 - total flux cleaned = -0.0010301 Jy ! Component: 3450 - total flux cleaned = -0.00121146 Jy ! Component: 3500 - total flux cleaned = -0.00139174 Jy ! Component: 3550 - total flux cleaned = -0.00142151 Jy ! Component: 3600 - total flux cleaned = -0.00159939 Jy ! Component: 3650 - total flux cleaned = -0.0017175 Jy ! Component: 3700 - total flux cleaned = -0.00180542 Jy ! Component: 3750 - total flux cleaned = -0.00203848 Jy ! Component: 3800 - total flux cleaned = -0.00215459 Jy ! Component: 3850 - total flux cleaned = -0.00238539 Jy ! Component: 3900 - total flux cleaned = -0.00255772 Jy ! Component: 3950 - total flux cleaned = -0.00278628 Jy ! Component: 4000 - total flux cleaned = -0.00298527 Jy ! Component: 4050 - total flux cleaned = -0.00323989 Jy ! Total flux subtracted in 4096 components = -0.00338062 Jy ! Clean residual min=-0.001615 max=0.001537 Jy/beam ! Clean residual mean=0.000000 rms=0.000473 Jy/beam ! Combined flux in latest and established models = 1.15814 Jy keep ! Adding 304 model components to the UV plane model. ! The established model now contains 380 components and 1.15814 Jy ![Exited script file: /opt64/bin/pima_mupet_02.dfm] wmap /vlbi/vcs9/uvm//J2218-0335_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.01 x 3.572 at -16 degrees (North through East) ! Clean map min=-0.0076212 max=0.70542 Jy/beam ! Writing clean map to FITS file: /vlbi/vcs9/uvm//J2218-0335_X_a_map.fits wmodel /vlbi/vcs9/uvm//J2218-0335_X_a_map.mod ! Writing 380 model components to file: /vlbi/vcs9/uvm//J2218-0335_X_a_map.mod wobs /vlbi/vcs9/uvm//J2218-0335_X_a_uvs.fits ! Writing UV FITS file: /vlbi/vcs9/uvm//J2218-0335_X_a_uvs.fits wwins /vlbi/vcs9/uvm//J2218-0335_X_a_map.win ! wwins: Wrote 3 windows to /vlbi/vcs9/uvm//J2218-0335_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.705418 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000461938 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.196453 0.196453 0.392906 0.785813 1.57163 3.14325 6.2865 12.573 25.146 50.292 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.705 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1527.08 quit ! Quitting program ! Log file /vlbi/vcs9/uvm//J2218-0335_X_a_dfm.log closed on Tue Dec 26 23:09:38 2017