! Started logfile: /vlbi/vcs9/uvm//J2210+0857_X_a_dfm.log on Tue Dec 26 23:09:16 2017
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    7.39200
obs     /vlbi/vcs9/uvm//J2210+0857_X_a_uvm.fits
! Reading UV FITS file: /vlbi/vcs9/uvm//J2210+0857_X_a_uvm.fits
! AN table 1: 23 integrations on 28 of 28 possible baselines.
! AN table 2: 37 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.729251 visibilities/baseline/integration-bin.
! Found source: J2210+0857
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 94 lines of history.
! 
! Reading 11528 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_02.dfm J2210+0857_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 60
float amp_soltime2
amp_soltime2 = 5
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.1
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_02.dvm version of 2017.12.26 === "
! === Difmap script: pima_mupet_02.dvm version of 2017.12.26 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.0854257 Jy 
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 19 telescope corrections were flagged in sub-array 1.
!  A total of 49 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 19 telescope corrections were flagged in sub-array 1.
!  A total of 49 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 19 telescope corrections were flagged in sub-array 1.
!  A total of 49 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 19 telescope corrections were flagged in sub-array 1.
!  A total of 49 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 5.
!  A total of 19 telescope corrections were flagged in sub-array 1.
!  A total of 49 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 6.
!  A total of 19 telescope corrections were flagged in sub-array 1.
!  A total of 49 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 7.
!  A total of 19 telescope corrections were flagged in sub-array 1.
!  A total of 49 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 8.
!  A total of 19 telescope corrections were flagged in sub-array 1.
!  A total of 49 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.003911Jy  sigma=25.152781
! Fit after  self-cal, rms=0.927779Jy  sigma=23.234115
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
peakwin win_mult
! Inverting map and beam 
! Estimated beam: bmin=0.8584 mas, bmaj=2.089 mas, bpa=-0.7463 degrees
! Estimated noise=0.43075 mJy/beam.
! Added new window around map position (0, 0).
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0559033 Jy
! Component: 100  -  total flux cleaned = 0.0720017 Jy
! Total flux subtracted in 100 components = 0.0720017 Jy
! Clean residual min=-0.004157 max=0.013357 Jy/beam
! Clean residual mean=0.000001 rms=0.001375 Jy/beam
! Combined flux in latest and established models = 0.0720017 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.0720017 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.041210Jy  sigma=0.928832
! Fit after  self-cal, rms=0.041165Jy  sigma=0.928260
! Inverting map 
! Added new window around map position (-1.4, -2).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0141477 Jy
! Component: 100  -  total flux cleaned = 0.0212911 Jy
! Total flux subtracted in 100 components = 0.0212911 Jy
! Clean residual min=-0.002618 max=0.005649 Jy/beam
! Clean residual mean=0.000000 rms=0.000796 Jy/beam
! Combined flux in latest and established models = 0.0932928 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 16 model components to the UV plane model.
! The established model now contains 30 components and 0.0932928 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.035462Jy  sigma=0.754744
! Fit after  self-cal, rms=0.035044Jy  sigma=0.743518
! Inverting map 
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00580509 Jy
! Component: 100  -  total flux cleaned = 0.00928048 Jy
! Total flux subtracted in 100 components = 0.00928048 Jy
! Clean residual min=-0.002043 max=0.003005 Jy/beam
! Clean residual mean=0.000000 rms=0.000529 Jy/beam
! Combined flux in latest and established models = 0.102573 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 24 model components to the UV plane model.
! The established model now contains 48 components and 0.102573 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033795Jy  sigma=0.703322
! Fit after  self-cal, rms=0.033728Jy  sigma=0.701372
! Inverting map 
print "============== Finished uniform weighting CLEAN =============="
! ============== Finished uniform weighting CLEAN ============== 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.215 mas, bmaj=2.574 mas, bpa=-0.1271 degrees
! Estimated noise=0.263048 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00484093 Jy
! Component: 100  -  total flux cleaned = 0.00719682 Jy
! Component: 150  -  total flux cleaned = 0.00849834 Jy
! Component: 200  -  total flux cleaned = 0.00923377 Jy
! Total flux subtracted in 200 components = 0.00923377 Jy
! Clean residual min=-0.001375 max=0.001753 Jy/beam
! Clean residual mean=0.000000 rms=0.000317 Jy/beam
! Combined flux in latest and established models = 0.111807 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 45 model components to the UV plane model.
! The established model now contains 77 components and 0.111807 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033293Jy  sigma=0.686457
! Fit after  self-cal, rms=0.033269Jy  sigma=0.685642
! Inverting map 
print "============== Finished natural weighting CLEAN =============="
! ============== Finished natural weighting CLEAN ============== 
! 
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.993467
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     HN        1.06     KP        1.00     LA        1.01     
!   NL        1.01     OV        1.01     PT        0.95     SC        0.99     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 1.01522
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00     FD        1.03     KP        0.96     LA        0.96     
!   MK        0.97     NL        0.99     OV        0.98     PT        0.99     
!   SC        0.98     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.00392
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.96     HN        1.00     KP        1.02     LA        1.00     
!   NL        1.01     OV        0.97     PT        0.97     SC        1.03     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 1.00492
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.02     FD        1.00     KP        0.97     LA        0.99     
!   MK        0.99     NL        1.03     OV        0.99     PT        0.98     
!   SC        0.97     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.983635
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     HN        1.02     KP        0.99     LA        1.02     
!   NL        1.03     OV        1.00     PT        1.01     SC        1.08     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 1.01948
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00     FD        1.00     KP        0.98     LA        0.98     
!   MK        0.91     NL        1.02     OV        0.98     PT        0.96     
!   SC        1.00     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.990391
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00     HN        1.09     KP        1.00     LA        0.98     
!   NL        1.01     OV        1.00     PT        1.00     SC        1.00     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.998132
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.97     FD        0.98     KP        1.01     LA        0.98     
!   MK        0.95     NL        1.08     OV        0.99     PT        1.02     
!   SC        1.04     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.972221
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     HN        1.07     KP        1.02     LA        0.99     
!   NL        1.04     OV        0.96     PT        1.02     SC        1.11     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.992434
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00     FD        1.03     KP        0.98     LA        0.99     
!   MK        1.08     NL        1.02     OV        0.95     PT        1.02     
!   SC        1.00     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.969404
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00     HN        1.00     KP        0.98     LA        0.99     
!   NL        1.11     OV        1.01     PT        1.00     SC        1.17     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.989743
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.02     FD        1.00     KP        1.01     LA        1.00     
!   MK        1.05     NL        1.06     OV        1.03     PT        0.95     
!   SC        0.97     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.97201
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     HN        1.01     KP        1.01     LA        1.04     
!   NL        1.13     OV        1.00     PT        0.99     SC        1.07     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.981698
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.99     FD        1.03     KP        0.98     LA        1.02     
!   MK        1.15     NL        1.03     OV        1.00     PT        1.00     
!   SC        0.98     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.980116
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.97     HN        1.05     KP        1.01     LA        1.00     
!   NL        1.04     OV        0.98     PT        1.08     SC        1.03     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.998599
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.04     FD        1.00     KP        0.99     LA        1.01     
!   MK        0.94     NL        1.03     OV        1.01     PT        0.98     
!   SC        1.00     
! 
! 
! Fit before self-cal, rms=0.033269Jy  sigma=0.685642
! Fit after  self-cal, rms=0.032776Jy  sigma=0.684075
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032776Jy  sigma=0.684075
! Fit after  self-cal, rms=0.032776Jy  sigma=0.684071
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.221 mas, bmaj=2.605 mas, bpa=-0.1818 degrees
! Estimated noise=0.262435 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-7, -8.6).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000667488 Jy
! Component: 100  -  total flux cleaned = 0.000426279 Jy
! Component: 150  -  total flux cleaned = 0.000280861 Jy
! Component: 200  -  total flux cleaned = 0.000197543 Jy
! Total flux subtracted in 200 components = 0.000197543 Jy
! Clean residual min=-0.000942 max=0.001184 Jy/beam
! Clean residual mean=-0.000000 rms=0.000242 Jy/beam
! Combined flux in latest and established models = 0.112005 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 26 model components to the UV plane model.
! The established model now contains 101 components and 0.112005 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032720Jy  sigma=0.682262
! Fit after  self-cal, rms=0.032720Jy  sigma=0.682205
! Inverting map 
print "============== Finished amplitude gscale SELF-CAL =============="
! ============== Finished amplitude gscale SELF-CAL ============== 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032720Jy  sigma=0.682205
! Fit after  self-cal, rms=0.032654Jy  sigma=0.680696
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (47.6, -2.4).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00072359 Jy
! Component: 100  -  total flux cleaned = 0.000721093 Jy
! Component: 150  -  total flux cleaned = 0.000700124 Jy
! Component: 200  -  total flux cleaned = 0.000624888 Jy
! Total flux subtracted in 200 components = 0.000624888 Jy
! Clean residual min=-0.000879 max=0.000856 Jy/beam
! Clean residual mean=-0.000000 rms=0.000219 Jy/beam
! Combined flux in latest and established models = 0.112629 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 24 model components to the UV plane model.
! The established model now contains 119 components and 0.112629 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032618Jy  sigma=0.679638
! Fit after  self-cal, rms=0.032593Jy  sigma=0.679102
! Inverting map 
print "=== Finished natural weighting clean with shorter phase_soltime "
! === Finished natural weighting clean with shorter phase_soltime  
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.221 x 2.605 at -0.1818 degrees (North through East)
! Clean map  min=-0.00085859  max=0.065954 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "============== Finished amplitude self-cal =============="
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8588 mas, bmaj=2.096 mas, bpa=-0.7857 degrees
! Estimated noise=0.431815 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0565311 Jy
! Component: 100  -  total flux cleaned = 0.0770432 Jy
! Component: 150  -  total flux cleaned = 0.0879567 Jy
! Component: 200  -  total flux cleaned = 0.0944011 Jy
! Total flux subtracted in 200 components = 0.0944011 Jy
! Clean residual min=-0.002552 max=0.002841 Jy/beam
! Clean residual mean=-0.000000 rms=0.000587 Jy/beam
! Combined flux in latest and established models = 0.0944011 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 34 model components to the UV plane model.
! The established model now contains 34 components and 0.0944011 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.221 mas, bmaj=2.605 mas, bpa=-0.1818 degrees
! Estimated noise=0.262435 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00758502 Jy
! Component: 100  -  total flux cleaned = 0.0112895 Jy
! Component: 150  -  total flux cleaned = 0.0134366 Jy
! Component: 200  -  total flux cleaned = 0.0149445 Jy
! Total flux subtracted in 200 components = 0.0149445 Jy
! Clean residual min=-0.001081 max=0.001383 Jy/beam
! Clean residual mean=-0.000000 rms=0.000287 Jy/beam
! Combined flux in latest and established models = 0.109346 Jy
! Adding 50 model components to the UV plane model.
! The established model now contains 73 components and 0.109346 Jy
! Inverting map 
! Added new window around map position (-23.4, 17.4).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00153014 Jy
! Component: 100  -  total flux cleaned = 0.00208678 Jy
! Component: 150  -  total flux cleaned = 0.00235129 Jy
! Component: 200  -  total flux cleaned = 0.00240139 Jy
! Total flux subtracted in 200 components = 0.00240139 Jy
! Clean residual min=-0.000919 max=0.000954 Jy/beam
! Clean residual mean=0.000000 rms=0.000223 Jy/beam
! Combined flux in latest and established models = 0.111747 Jy
! Adding 37 model components to the UV plane model.
! The established model now contains 104 components and 0.111747 Jy
! Inverting map 
! Added new window around map position (21.4, 49.2).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000787197 Jy
! Component: 100  -  total flux cleaned = 0.000987029 Jy
! Component: 150  -  total flux cleaned = 0.00109891 Jy
! Component: 200  -  total flux cleaned = 0.00116154 Jy
! Total flux subtracted in 200 components = 0.00116154 Jy
! Clean residual min=-0.000831 max=0.000795 Jy/beam
! Clean residual mean=0.000000 rms=0.000202 Jy/beam
! Combined flux in latest and established models = 0.112909 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 135 components and 0.112909 Jy
! Inverting map 
clean
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 3.97874e-05 Jy
! Component: 100  -  total flux cleaned = 0.000113603 Jy
! Component: 150  -  total flux cleaned = 0.000130845 Jy
! Component: 200  -  total flux cleaned = 0.000180582 Jy
! Total flux subtracted in 200 components = 0.000180582 Jy
! Clean residual min=-0.000800 max=0.000736 Jy/beam
! Clean residual mean=0.000000 rms=0.000191 Jy/beam
! Combined flux in latest and established models = 0.113089 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 41 model components to the UV plane model.
! The established model now contains 148 components and 0.113089 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032532Jy  sigma=0.677601
! Fit after  self-cal, rms=0.032511Jy  sigma=0.677155
wmodel J2210+0857_X_map.mod
! Writing 148 model components to file: J2210+0857_X_map.mod
wobs   J2210+0857_X_uvs.fits
! Writing UV FITS file: J2210+0857_X_uvs.fits
wwins  J2210+0857_X_map.win
! wwins: Wrote 6 windows to J2210+0857_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -3.11593e-05 Jy
! Component: 100  -  total flux cleaned = -1.97355e-05 Jy
! Component: 150  -  total flux cleaned = 4.26639e-06 Jy
! Component: 200  -  total flux cleaned = -1.79452e-05 Jy
! Component: 250  -  total flux cleaned = -9.29581e-05 Jy
! Component: 300  -  total flux cleaned = -0.000165862 Jy
! Component: 350  -  total flux cleaned = -0.000237067 Jy
! Component: 400  -  total flux cleaned = -0.000276873 Jy
! Component: 450  -  total flux cleaned = -0.000286633 Jy
! Component: 500  -  total flux cleaned = -0.000324566 Jy
! Component: 550  -  total flux cleaned = -0.000371022 Jy
! Component: 600  -  total flux cleaned = -0.000416406 Jy
! Component: 650  -  total flux cleaned = -0.000443379 Jy
! Component: 700  -  total flux cleaned = -0.000505036 Jy
! Component: 750  -  total flux cleaned = -0.000522485 Jy
! Component: 800  -  total flux cleaned = -0.000556535 Jy
! Component: 850  -  total flux cleaned = -0.000606584 Jy
! Component: 900  -  total flux cleaned = -0.000598159 Jy
! Component: 950  -  total flux cleaned = -0.000614383 Jy
! Component: 1000  -  total flux cleaned = -0.000606335 Jy
! Component: 1050  -  total flux cleaned = -0.000582779 Jy
! Component: 1100  -  total flux cleaned = -0.000614 Jy
! Component: 1150  -  total flux cleaned = -0.000598641 Jy
! Component: 1200  -  total flux cleaned = -0.000606258 Jy
! Component: 1250  -  total flux cleaned = -0.000628707 Jy
! Component: 1300  -  total flux cleaned = -0.000606486 Jy
! Component: 1350  -  total flux cleaned = -0.000591868 Jy
! Component: 1400  -  total flux cleaned = -0.000584687 Jy
! Component: 1450  -  total flux cleaned = -0.000570486 Jy
! Component: 1500  -  total flux cleaned = -0.00052145 Jy
! Component: 1550  -  total flux cleaned = -0.000556129 Jy
! Component: 1600  -  total flux cleaned = -0.00054244 Jy
! Component: 1650  -  total flux cleaned = -0.00054251 Jy
! Component: 1700  -  total flux cleaned = -0.000556038 Jy
! Component: 1750  -  total flux cleaned = -0.000555997 Jy
! Component: 1800  -  total flux cleaned = -0.000562528 Jy
! Component: 1850  -  total flux cleaned = -0.00056251 Jy
! Component: 1900  -  total flux cleaned = -0.000568948 Jy
! Component: 1950  -  total flux cleaned = -0.000568962 Jy
! Component: 2000  -  total flux cleaned = -0.000587773 Jy
! Component: 2050  -  total flux cleaned = -0.000587703 Jy
! Component: 2100  -  total flux cleaned = -0.000581606 Jy
! Component: 2150  -  total flux cleaned = -0.000587672 Jy
! Component: 2200  -  total flux cleaned = -0.00058764 Jy
! Component: 2250  -  total flux cleaned = -0.00059964 Jy
! Component: 2300  -  total flux cleaned = -0.000581842 Jy
! Component: 2350  -  total flux cleaned = -0.000564166 Jy
! Component: 2400  -  total flux cleaned = -0.000546617 Jy
! Component: 2450  -  total flux cleaned = -0.000529298 Jy
! Component: 2500  -  total flux cleaned = -0.00051213 Jy
! Component: 2550  -  total flux cleaned = -0.000478062 Jy
! Component: 2600  -  total flux cleaned = -0.000466778 Jy
! Component: 2650  -  total flux cleaned = -0.000466712 Jy
! Component: 2700  -  total flux cleaned = -0.000438954 Jy
! Component: 2750  -  total flux cleaned = -0.000405851 Jy
! Component: 2800  -  total flux cleaned = -0.000373004 Jy
! Component: 2850  -  total flux cleaned = -0.00036223 Jy
! Component: 2900  -  total flux cleaned = -0.000340739 Jy
! Component: 2950  -  total flux cleaned = -0.000314019 Jy
! Component: 3000  -  total flux cleaned = -0.000287436 Jy
! Component: 3050  -  total flux cleaned = -0.000261089 Jy
! Component: 3100  -  total flux cleaned = -0.000245407 Jy
! Component: 3150  -  total flux cleaned = -0.000219461 Jy
! Component: 3200  -  total flux cleaned = -0.000188446 Jy
! Component: 3250  -  total flux cleaned = -0.000167926 Jy
! Component: 3300  -  total flux cleaned = -0.000111906 Jy
! Component: 3350  -  total flux cleaned = -0.00010183 Jy
! Component: 3400  -  total flux cleaned = -5.65124e-05 Jy
! Component: 3450  -  total flux cleaned = -2.15237e-05 Jy
! Component: 3500  -  total flux cleaned = 3.28528e-06 Jy
! Component: 3550  -  total flux cleaned = 2.80216e-05 Jy
! Component: 3600  -  total flux cleaned = 5.74648e-05 Jy
! Component: 3650  -  total flux cleaned = 8.19422e-05 Jy
! Component: 3700  -  total flux cleaned = 0.000115879 Jy
! Component: 3750  -  total flux cleaned = 0.000140002 Jy
! Component: 3800  -  total flux cleaned = 0.000159145 Jy
! Component: 3850  -  total flux cleaned = 0.000182962 Jy
! Component: 3900  -  total flux cleaned = 0.000192476 Jy
! Component: 3950  -  total flux cleaned = 0.000206644 Jy
! Component: 4000  -  total flux cleaned = 0.000234752 Jy
! Component: 4050  -  total flux cleaned = 0.000248749 Jy
! Total flux subtracted in 4096 components = 0.000276597 Jy
! Clean residual min=-0.000254 max=0.000362 Jy/beam
! Clean residual mean=0.000000 rms=0.000081 Jy/beam
! Combined flux in latest and established models = 0.113366 Jy
keep
! Adding 286 model components to the UV plane model.
! The established model now contains 434 components and 0.113366 Jy
![Exited script file: /opt64/bin/pima_mupet_02.dfm]
wmap   /vlbi/vcs9/uvm//J2210+0857_X_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.221 x 2.605 at -0.1818 degrees (North through East)
! Clean map  min=-0.00047369  max=0.065841 Jy/beam
! Writing clean map to FITS file: /vlbi/vcs9/uvm//J2210+0857_X_a_map.fits
wmodel /vlbi/vcs9/uvm//J2210+0857_X_a_map.mod
! Writing 434 model components to file: /vlbi/vcs9/uvm//J2210+0857_X_a_map.mod
wobs   /vlbi/vcs9/uvm//J2210+0857_X_a_uvs.fits
! Writing UV FITS file: /vlbi/vcs9/uvm//J2210+0857_X_a_uvs.fits
wwins  /vlbi/vcs9/uvm//J2210+0857_X_a_map.win
! wwins: Wrote 7 windows to /vlbi/vcs9/uvm//J2210+0857_X_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0658405 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 8.03525e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.366123 0.366123 0.732247 1.46449 2.92899 5.85797 11.7159 23.4319 46.8638 93.7276
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0002 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.065 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  819.396 
quit
! Quitting program
! Log file /vlbi/vcs9/uvm//J2210+0857_X_a_dfm.log closed on Tue Dec 26 23:09:20 2017