! Started logfile: /vlbi/vcs9/uvm//J2128-1504_X_a_dfm.log on Tue Dec 26 23:02:18 2017
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    7.39200
obs     /vlbi/vcs9/uvm//J2128-1504_X_a_uvm.fits
! Reading UV FITS file: /vlbi/vcs9/uvm//J2128-1504_X_a_uvm.fits
! AN table 1: 25 integrations on 36 of 36 possible baselines.
! AN table 2: 95 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.947472 visibilities/baseline/integration-bin.
! Found source: J2128-1504
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 94 lines of history.
! 
! Reading 26984 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_02.dfm J2128-1504_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 60
float amp_soltime2
amp_soltime2 = 5
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.1
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_02.dvm version of 2017.12.26 === "
! === Difmap script: pima_mupet_02.dvm version of 2017.12.26 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.0397143 Jy 
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 23 telescope corrections were flagged in sub-array 1.
!  A total of 8 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 23 telescope corrections were flagged in sub-array 1.
!  A total of 8 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 23 telescope corrections were flagged in sub-array 1.
!  A total of 8 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 23 telescope corrections were flagged in sub-array 1.
!  A total of 8 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 5.
!  A total of 23 telescope corrections were flagged in sub-array 1.
!  A total of 8 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 6.
!  A total of 23 telescope corrections were flagged in sub-array 1.
!  A total of 8 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 7.
!  A total of 23 telescope corrections were flagged in sub-array 1.
!  A total of 8 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 8.
!  A total of 23 telescope corrections were flagged in sub-array 1.
!  A total of 8 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.000786Jy  sigma=23.324529
! Fit after  self-cal, rms=0.979859Jy  sigma=22.828783
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
peakwin win_mult
! Inverting map and beam 
! Estimated beam: bmin=0.7751 mas, bmaj=2.119 mas, bpa=-9.367 degrees
! Estimated noise=0.336324 mJy/beam.
! Added new window around map position (0, 0).
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0163276 Jy
! Component: 100  -  total flux cleaned = 0.019894 Jy
! Total flux subtracted in 100 components = 0.019894 Jy
! Clean residual min=-0.001593 max=0.002934 Jy/beam
! Clean residual mean=0.000005 rms=0.000411 Jy/beam
! Combined flux in latest and established models = 0.019894 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.019894 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033848Jy  sigma=0.735918
! Fit after  self-cal, rms=0.033823Jy  sigma=0.735324
! Inverting map 
! Added new window around map position (-3.2, 0.6).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00320336 Jy
! Component: 100  -  total flux cleaned = 0.00505408 Jy
! Total flux subtracted in 100 components = 0.00505408 Jy
! Clean residual min=-0.001323 max=0.002219 Jy/beam
! Clean residual mean=0.000004 rms=0.000338 Jy/beam
! Combined flux in latest and established models = 0.0249481 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 19 model components to the UV plane model.
! The established model now contains 29 components and 0.0249481 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033537Jy  sigma=0.727470
! Fit after  self-cal, rms=0.033532Jy  sigma=0.727355
! Inverting map 
! Added new window around map position (-1.2, 0.4).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00234552 Jy
! Component: 100  -  total flux cleaned = 0.00372291 Jy
! Total flux subtracted in 100 components = 0.00372291 Jy
! Clean residual min=-0.001162 max=0.001194 Jy/beam
! Clean residual mean=0.000003 rms=0.000289 Jy/beam
! Combined flux in latest and established models = 0.028671 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 16 model components to the UV plane model.
! The established model now contains 43 components and 0.028671 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033363Jy  sigma=0.722817
! Fit after  self-cal, rms=0.033356Jy  sigma=0.722612
! Inverting map 
print "============== Finished uniform weighting CLEAN =============="
! ============== Finished uniform weighting CLEAN ============== 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.018 mas, bmaj=3.239 mas, bpa=-14.25 degrees
! Estimated noise=0.184661 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00185829 Jy
! Component: 100  -  total flux cleaned = 0.00301125 Jy
! Component: 150  -  total flux cleaned = 0.00379914 Jy
! Component: 200  -  total flux cleaned = 0.00435308 Jy
! Total flux subtracted in 200 components = 0.00435308 Jy
! Clean residual min=-0.000902 max=0.000987 Jy/beam
! Clean residual mean=0.000002 rms=0.000227 Jy/beam
! Combined flux in latest and established models = 0.0330241 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 24 model components to the UV plane model.
! The established model now contains 62 components and 0.0330241 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033274Jy  sigma=0.720435
! Fit after  self-cal, rms=0.033271Jy  sigma=0.720352
! Inverting map 
print "============== Finished natural weighting CLEAN =============="
! ============== Finished natural weighting CLEAN ============== 
! 
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.949296
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        1.16     KP        1.26     LA        0.88     
!   MK        1.05     NL        1.03     OV        1.29     PT        0.88     
!   SC        1.01     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.978102
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.03     FD        1.02     HN        1.10     KP        1.10     
!   LA        1.02     MK        0.93     NL        1.13     OV        0.84     
! 
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.977828
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.96     KP        0.88     LA        0.97     
!   MK        1.03     NL        1.20     OV        1.42     PT        0.88     
!   SC        0.91     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 1.02092
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.99     FD        0.94     HN        1.13     KP        1.00     
!   LA        1.01     MK        0.95     NL        0.88     OV        0.94     
! 
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.993891
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.96     KP        1.07     LA        1.04     
!   MK        0.86     NL        0.92     OV        1.06     PT        0.79     
!   SC        1.29     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 1.00494
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00     FD        0.91     HN        1.09     KP        0.89     
!   LA        1.03     MK        1.07     NL        1.09     OV        0.89     
! 
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.00341
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.24     FD        0.97     KP        1.01     LA        0.94     
!   MK        1.00     NL        0.96     OV        1.01     PT        0.86     
!   SC        0.98     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 1.024
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.93     FD        0.99     HN        0.97     KP        1.12     
!   LA        1.01     MK        0.88     NL        0.95     OV        0.97     
! 
! 
! Correcting IF 5.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.942135
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.25     FD        1.04     KP        1.04     LA        0.94     
!   MK        1.30     NL        0.99     OV        1.22     PT        0.85     
!   SC        0.92     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.931339
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.06     FD        1.15     HN        1.07     KP        0.96     
!   LA        1.04     MK        1.14     NL        1.05     OV        1.11     
! 
! 
! Correcting IF 6.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.977034
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.23     FD        1.14     KP        1.00     LA        0.91     
!   MK        1.29     NL        0.76     OV        1.11     PT        1.04     
!   SC        0.72     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.998085
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.91     FD        1.05     HN        0.98     KP        1.05     
!   LA        0.98     MK        1.08     NL        1.01     OV        0.96     
! 
! 
! Correcting IF 7.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.985152
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.96     KP        1.03     LA        1.16     
!   MK        1.06     NL        0.86     OV        1.14     PT        1.11     
!   SC        0.80     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 1.0142
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.95     FD        0.92     HN        0.99     KP        0.97     
!   LA        0.97     MK        1.04     NL        1.09     OV        0.96     
! 
! 
! Correcting IF 8.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.987972
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.33     FD        1.00     KP        0.98     LA        0.84     
!   MK        1.01     NL        1.06     OV        1.04     PT        0.98     
!   SC        0.87     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.989466
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.87     FD        0.97     HN        1.17     KP        1.02     
!   LA        0.99     MK        1.03     NL        1.18     OV        0.87     
! 
! 
! Fit before self-cal, rms=0.033271Jy  sigma=0.720352
! Fit after  self-cal, rms=0.033535Jy  sigma=0.718193
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033535Jy  sigma=0.718193
! Fit after  self-cal, rms=0.033536Jy  sigma=0.718173
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.04 mas, bmaj=3.133 mas, bpa=-13.67 degrees
! Estimated noise=0.179773 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-5, 2).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000650358 Jy
! Component: 100  -  total flux cleaned = 0.000681358 Jy
! Component: 150  -  total flux cleaned = 0.000693694 Jy
! Component: 200  -  total flux cleaned = 0.000704722 Jy
! Total flux subtracted in 200 components = 0.000704722 Jy
! Clean residual min=-0.000679 max=0.000703 Jy/beam
! Clean residual mean=0.000001 rms=0.000165 Jy/beam
! Combined flux in latest and established models = 0.0337288 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 29 model components to the UV plane model.
! The established model now contains 88 components and 0.0337288 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033521Jy  sigma=0.717652
! Fit after  self-cal, rms=0.033520Jy  sigma=0.717635
! Inverting map 
print "============== Finished amplitude gscale SELF-CAL =============="
! ============== Finished amplitude gscale SELF-CAL ============== 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033520Jy  sigma=0.717635
! Fit after  self-cal, rms=0.033467Jy  sigma=0.716039
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000245997 Jy
! Component: 100  -  total flux cleaned = 0.000285781 Jy
! Component: 150  -  total flux cleaned = 0.000303788 Jy
! Component: 200  -  total flux cleaned = 0.000303854 Jy
! Total flux subtracted in 200 components = 0.000303854 Jy
! Clean residual min=-0.000650 max=0.000701 Jy/beam
! Clean residual mean=0.000001 rms=0.000160 Jy/beam
! Combined flux in latest and established models = 0.0340327 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 29 model components to the UV plane model.
! The established model now contains 102 components and 0.0340327 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033462Jy  sigma=0.715939
! Fit after  self-cal, rms=0.033455Jy  sigma=0.715701
! Inverting map 
print "=== Finished natural weighting clean with shorter phase_soltime "
! === Finished natural weighting clean with shorter phase_soltime  
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.04 x 3.133 at -13.67 degrees (North through East)
! Clean map  min=-0.00061604  max=0.019916 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "============== Finished amplitude self-cal =============="
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7783 mas, bmaj=2.077 mas, bpa=-8.86 degrees
! Estimated noise=0.330965 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0162407 Jy
! Component: 100  -  total flux cleaned = 0.0208574 Jy
! Component: 150  -  total flux cleaned = 0.0236928 Jy
! Component: 200  -  total flux cleaned = 0.0256391 Jy
! Total flux subtracted in 200 components = 0.0256391 Jy
! Clean residual min=-0.001216 max=0.001150 Jy/beam
! Clean residual mean=0.000002 rms=0.000279 Jy/beam
! Combined flux in latest and established models = 0.0256391 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 25 model components to the UV plane model.
! The established model now contains 25 components and 0.0256391 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.04 mas, bmaj=3.133 mas, bpa=-13.67 degrees
! Estimated noise=0.179773 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0023838 Jy
! Component: 100  -  total flux cleaned = 0.00392384 Jy
! Component: 150  -  total flux cleaned = 0.00503533 Jy
! Component: 200  -  total flux cleaned = 0.00584933 Jy
! Total flux subtracted in 200 components = 0.00584933 Jy
! Clean residual min=-0.000625 max=0.000822 Jy/beam
! Clean residual mean=0.000001 rms=0.000183 Jy/beam
! Combined flux in latest and established models = 0.0314884 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 63 components and 0.0314884 Jy
! Inverting map 
! Added new window around map position (20.8, -40.8).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000846082 Jy
! Component: 100  -  total flux cleaned = 0.00118149 Jy
! Component: 150  -  total flux cleaned = 0.00130572 Jy
! Component: 200  -  total flux cleaned = 0.00141475 Jy
! Total flux subtracted in 200 components = 0.00141475 Jy
! Clean residual min=-0.000576 max=0.000735 Jy/beam
! Clean residual mean=0.000001 rms=0.000156 Jy/beam
! Combined flux in latest and established models = 0.0329032 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 92 components and 0.0329032 Jy
! Inverting map 
! Added new window around map position (-29.6, 30.2).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000784919 Jy
! Component: 100  -  total flux cleaned = 0.00122269 Jy
! Component: 150  -  total flux cleaned = 0.00155085 Jy
! Component: 200  -  total flux cleaned = 0.00169022 Jy
! Total flux subtracted in 200 components = 0.00169022 Jy
! Clean residual min=-0.000548 max=0.000629 Jy/beam
! Clean residual mean=0.000001 rms=0.000138 Jy/beam
! Combined flux in latest and established models = 0.0345934 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 117 components and 0.0345934 Jy
! Inverting map 
! Added new window around map position (-37, -43.4).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000188862 Jy
! Component: 100  -  total flux cleaned = 0.000230417 Jy
! Component: 150  -  total flux cleaned = 0.000295065 Jy
! Component: 200  -  total flux cleaned = 0.000377284 Jy
! Total flux subtracted in 200 components = 0.000377284 Jy
! Clean residual min=-0.000547 max=0.000564 Jy/beam
! Clean residual mean=0.000001 rms=0.000129 Jy/beam
! Combined flux in latest and established models = 0.0349707 Jy
! Adding 37 model components to the UV plane model.
! The established model now contains 149 components and 0.0349707 Jy
! Inverting map 
! Added new window around map position (50.8, 31.2).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00032176 Jy
! Component: 100  -  total flux cleaned = 0.000359544 Jy
! Component: 150  -  total flux cleaned = 0.000470281 Jy
! Component: 200  -  total flux cleaned = 0.000541282 Jy
! Total flux subtracted in 200 components = 0.000541282 Jy
! Clean residual min=-0.000510 max=0.000513 Jy/beam
! Clean residual mean=0.000001 rms=0.000123 Jy/beam
! Combined flux in latest and established models = 0.0355119 Jy
! Adding 41 model components to the UV plane model.
! The established model now contains 173 components and 0.0355119 Jy
! Inverting map 
clean
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 8.66472e-05 Jy
! Component: 100  -  total flux cleaned = 0.000141955 Jy
! Component: 150  -  total flux cleaned = 0.000203968 Jy
! Component: 200  -  total flux cleaned = 0.000229447 Jy
! Total flux subtracted in 200 components = 0.000229447 Jy
! Clean residual min=-0.000487 max=0.000495 Jy/beam
! Clean residual mean=0.000001 rms=0.000120 Jy/beam
! Combined flux in latest and established models = 0.0357414 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 53 model components to the UV plane model.
! The established model now contains 195 components and 0.0357414 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033406Jy  sigma=0.714368
! Fit after  self-cal, rms=0.033399Jy  sigma=0.714159
wmodel J2128-1504_X_map.mod
! Writing 195 model components to file: J2128-1504_X_map.mod
wobs   J2128-1504_X_uvs.fits
! Writing UV FITS file: J2128-1504_X_uvs.fits
wwins  J2128-1504_X_map.win
! wwins: Wrote 8 windows to J2128-1504_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -5.22389e-06 Jy
! Component: 100  -  total flux cleaned = 2.64045e-05 Jy
! Component: 150  -  total flux cleaned = 4.85895e-05 Jy
! Component: 200  -  total flux cleaned = 7.73215e-05 Jy
! Component: 250  -  total flux cleaned = 9.82141e-05 Jy
! Component: 300  -  total flux cleaned = 9.82567e-05 Jy
! Component: 350  -  total flux cleaned = 9.83533e-05 Jy
! Component: 400  -  total flux cleaned = 9.8428e-05 Jy
! Component: 450  -  total flux cleaned = 9.84472e-05 Jy
! Component: 500  -  total flux cleaned = 9.24101e-05 Jy
! Component: 550  -  total flux cleaned = 9.24545e-05 Jy
! Component: 600  -  total flux cleaned = 8.64387e-05 Jy
! Component: 650  -  total flux cleaned = 8.06512e-05 Jy
! Component: 700  -  total flux cleaned = 5.1998e-05 Jy
! Component: 750  -  total flux cleaned = 2.38408e-05 Jy
! Component: 800  -  total flux cleaned = 2.3927e-05 Jy
! Component: 850  -  total flux cleaned = 7.54003e-06 Jy
! Component: 900  -  total flux cleaned = 2.2008e-06 Jy
! Component: 950  -  total flux cleaned = -1.38215e-05 Jy
! Component: 1000  -  total flux cleaned = -4.00644e-05 Jy
! Component: 1050  -  total flux cleaned = -4.51908e-05 Jy
! Component: 1100  -  total flux cleaned = -5.53792e-05 Jy
! Component: 1150  -  total flux cleaned = -4.02474e-05 Jy
! Component: 1200  -  total flux cleaned = -5.51874e-05 Jy
! Component: 1250  -  total flux cleaned = -4.53575e-05 Jy
! Component: 1300  -  total flux cleaned = -6.47744e-05 Jy
! Component: 1350  -  total flux cleaned = -3.59329e-05 Jy
! Component: 1400  -  total flux cleaned = -5.01974e-05 Jy
! Component: 1450  -  total flux cleaned = -4.54643e-05 Jy
! Component: 1500  -  total flux cleaned = -3.61933e-05 Jy
! Component: 1550  -  total flux cleaned = -3.6251e-05 Jy
! Component: 1600  -  total flux cleaned = -5.44779e-05 Jy
! Component: 1650  -  total flux cleaned = -4.09575e-05 Jy
! Component: 1700  -  total flux cleaned = -4.54316e-05 Jy
! Component: 1750  -  total flux cleaned = -4.54993e-05 Jy
! Component: 1800  -  total flux cleaned = -4.9842e-05 Jy
! Component: 1850  -  total flux cleaned = -4.12106e-05 Jy
! Component: 1900  -  total flux cleaned = -6.26584e-05 Jy
! Component: 1950  -  total flux cleaned = -5.83267e-05 Jy
! Component: 2000  -  total flux cleaned = -4.99152e-05 Jy
! Component: 2050  -  total flux cleaned = -4.98978e-05 Jy
! Component: 2100  -  total flux cleaned = -4.16088e-05 Jy
! Component: 2150  -  total flux cleaned = -3.74676e-05 Jy
! Component: 2200  -  total flux cleaned = -4.15073e-05 Jy
! Component: 2250  -  total flux cleaned = -1.32824e-05 Jy
! Component: 2300  -  total flux cleaned = -5.26987e-06 Jy
! Component: 2350  -  total flux cleaned = 1.4566e-05 Jy
! Component: 2400  -  total flux cleaned = 1.84862e-05 Jy
! Component: 2450  -  total flux cleaned = 2.63244e-05 Jy
! Component: 2500  -  total flux cleaned = 3.01909e-05 Jy
! Component: 2550  -  total flux cleaned = 4.56187e-05 Jy
! Component: 2600  -  total flux cleaned = 3.04556e-05 Jy
! Component: 2650  -  total flux cleaned = 6.07405e-05 Jy
! Component: 2700  -  total flux cleaned = 8.32841e-05 Jy
! Component: 2750  -  total flux cleaned = 0.000101894 Jy
! Component: 2800  -  total flux cleaned = 0.000116714 Jy
! Component: 2850  -  total flux cleaned = 0.000127732 Jy
! Component: 2900  -  total flux cleaned = 0.000149645 Jy
! Component: 2950  -  total flux cleaned = 0.000164101 Jy
! Component: 3000  -  total flux cleaned = 0.000189342 Jy
! Component: 3050  -  total flux cleaned = 0.00020366 Jy
! Component: 3100  -  total flux cleaned = 0.000228582 Jy
! Component: 3150  -  total flux cleaned = 0.000253315 Jy
! Component: 3200  -  total flux cleaned = 0.000267357 Jy
! Component: 3250  -  total flux cleaned = 0.000284791 Jy
! Component: 3300  -  total flux cleaned = 0.000295182 Jy
! Component: 3350  -  total flux cleaned = 0.000329621 Jy
! Component: 3400  -  total flux cleaned = 0.000346731 Jy
! Component: 3450  -  total flux cleaned = 0.000360353 Jy
! Component: 3500  -  total flux cleaned = 0.000380657 Jy
! Component: 3550  -  total flux cleaned = 0.000400824 Jy
! Component: 3600  -  total flux cleaned = 0.000427547 Jy
! Component: 3650  -  total flux cleaned = 0.000444159 Jy
! Component: 3700  -  total flux cleaned = 0.000467299 Jy
! Component: 3750  -  total flux cleaned = 0.000490318 Jy
! Component: 3800  -  total flux cleaned = 0.000496878 Jy
! Component: 3850  -  total flux cleaned = 0.000519632 Jy
! Component: 3900  -  total flux cleaned = 0.000545482 Jy
! Component: 3950  -  total flux cleaned = 0.000564761 Jy
! Component: 4000  -  total flux cleaned = 0.000577553 Jy
! Component: 4050  -  total flux cleaned = 0.000596632 Jy
! Total flux subtracted in 4096 components = 0.000618767 Jy
! Clean residual min=-0.000184 max=0.000174 Jy/beam
! Clean residual mean=0.000000 rms=0.000057 Jy/beam
! Combined flux in latest and established models = 0.0363601 Jy
keep
! Adding 269 model components to the UV plane model.
! The established model now contains 464 components and 0.0363601 Jy
![Exited script file: /opt64/bin/pima_mupet_02.dfm]
wmap   /vlbi/vcs9/uvm//J2128-1504_X_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.04 x 3.133 at -13.67 degrees (North through East)
! Clean map  min=-0.00044841  max=0.020187 Jy/beam
! Writing clean map to FITS file: /vlbi/vcs9/uvm//J2128-1504_X_a_map.fits
wmodel /vlbi/vcs9/uvm//J2128-1504_X_a_map.mod
! Writing 464 model components to file: /vlbi/vcs9/uvm//J2128-1504_X_a_map.mod
wobs   /vlbi/vcs9/uvm//J2128-1504_X_a_uvs.fits
! Writing UV FITS file: /vlbi/vcs9/uvm//J2128-1504_X_a_uvs.fits
wwins  /vlbi/vcs9/uvm//J2128-1504_X_a_map.win
! wwins: Wrote 9 windows to /vlbi/vcs9/uvm//J2128-1504_X_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.020187 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 5.70323e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.84756 0.84756 1.69512 3.39024 6.78048 13.561 27.1219 54.2438
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.02 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  353.957 
quit
! Quitting program
! Log file /vlbi/vcs9/uvm//J2128-1504_X_a_dfm.log closed on Tue Dec 26 23:02:23 2017