! Started logfile: /vlbi/vcs9/uvm//J2123+3012_C_a_dfm.log on Tue Dec 26 23:01:59 2017
float field_size
field_size =  1024
float field_cell
field_cell =   0.3000
float taper_size
taper_size =   40.0
float freq
freq       =    4.12800
obs     /vlbi/vcs9/uvm//J2123+3012_C_a_uvm.fits
! Reading UV FITS file: /vlbi/vcs9/uvm//J2123+3012_C_a_uvm.fits
! AN table 1: 26 integrations on 3 of 3 possible baselines.
! AN table 2: 156 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.898263 visibilities/baseline/integration-bin.
! Found source: J2123+3012
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 94 lines of history.
! 
! Reading 17376 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/opt64/bin/pima_mupet_02.dfm J2123+3012_C]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 60
float amp_soltime2
amp_soltime2 = 5
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.1
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_02.dvm version of 2017.12.26 === "
! === Difmap script: pima_mupet_02.dvm version of 2017.12.26 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.0319947 Jy 
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  A total of 53 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  A total of 53 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  A total of 53 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  A total of 53 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 5.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  A total of 53 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 6.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  A total of 53 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 7.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  A total of 53 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 8.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  A total of 53 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=0.999899Jy  sigma=32.410864
! Fit after  self-cal, rms=0.986946Jy  sigma=32.042530
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
peakwin win_mult
! Inverting map and beam 
! Estimated beam: bmin=3.668 mas, bmaj=8.616 mas, bpa=-28.08 degrees
! Estimated noise=0.694763 mJy/beam.
! Added new window around map position (0, 0).
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0113778 Jy
! Component: 100  -  total flux cleaned = 0.0165849 Jy
! Total flux subtracted in 100 components = 0.0165849 Jy
! Clean residual min=-0.003132 max=0.003569 Jy/beam
! Clean residual mean=-0.000010 rms=0.001079 Jy/beam
! Combined flux in latest and established models = 0.0165849 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 30 model components to the UV plane model.
! The established model now contains 30 components and 0.0165849 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028604Jy  sigma=0.693092
! Fit after  self-cal, rms=0.028594Jy  sigma=0.692750
! Inverting map 
print "============== Finished uniform weighting CLEAN =============="
! ============== Finished uniform weighting CLEAN ============== 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.077 mas, bmaj=8.191 mas, bpa=-25.67 degrees
! Estimated noise=0.165663 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00210988 Jy
! Component: 100  -  total flux cleaned = 0.00347792 Jy
! Component: 150  -  total flux cleaned = 0.00458341 Jy
! Component: 200  -  total flux cleaned = 0.00555397 Jy
! Total flux subtracted in 200 components = 0.00555397 Jy
! Clean residual min=-0.001675 max=0.001708 Jy/beam
! Clean residual mean=-0.000001 rms=0.000519 Jy/beam
! Combined flux in latest and established models = 0.0221389 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 29 model components to the UV plane model.
! The established model now contains 56 components and 0.0221389 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028301Jy  sigma=0.686273
! Fit after  self-cal, rms=0.028306Jy  sigma=0.686176
! Inverting map 
print "============== Finished natural weighting CLEAN =============="
! ============== Finished natural weighting CLEAN ============== 
! 
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 69 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   KP        0.00*    LA        0.00*    PT        0.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 1.07995
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.86     KP        1.22     LA        1.02     NL        0.89     
!   OV        0.85     PT        0.72     
! 
! 
! Correcting IF 2.
!  A total of 69 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   KP        0.00*    LA        0.00*    PT        0.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 1.10228
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.06     KP        1.04     LA        0.92     NL        1.03     
!   OV        0.76     PT        0.64     
! 
! 
! Correcting IF 3.
!  A total of 69 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   KP        0.00*    LA        0.00*    PT        0.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 1.05263
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.01     KP        1.10     LA        0.98     NL        0.95     
!   OV        0.88     PT        0.77     
! 
! 
! Correcting IF 4.
!  A total of 69 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   KP        0.00*    LA        0.00*    PT        0.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 1.03767
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.07     KP        1.24     LA        0.95     NL        1.05     
!   OV        0.83     PT        0.65     
! 
! 
! Correcting IF 5.
!  A total of 69 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   KP        0.00*    LA        0.00*    PT        0.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.986622
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.23     KP        1.06     LA        0.92     NL        1.05     
!   OV        1.07     PT        0.77     
! 
! 
! Correcting IF 6.
!  A total of 69 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   KP        0.00*    LA        0.00*    PT        0.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.912058
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.52     KP        1.24     LA        1.01     NL        1.11     
!   OV        0.94     PT        0.77     
! 
! 
! Correcting IF 7.
!  A total of 69 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   KP        0.00*    LA        0.00*    PT        0.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.958699
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.24     KP        1.26     LA        1.20     NL        1.07     
!   OV        0.84     PT        0.66     
! 
! 
! Correcting IF 8.
!  A total of 69 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   KP        0.00*    LA        0.00*    PT        0.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.942526
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.24     KP        1.31     LA        1.11     NL        0.95     
!   OV        0.97     PT        0.79     
! 
! 
! Fit before self-cal, rms=0.028306Jy  sigma=0.686176
! Fit after  self-cal, rms=0.025734Jy  sigma=0.671563
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025734Jy  sigma=0.671563
! Fit after  self-cal, rms=0.025732Jy  sigma=0.671519
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.913 mas, bmaj=8.236 mas, bpa=-21.81 degrees
! Estimated noise=0.171399 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000265799 Jy
! Component: 100  -  total flux cleaned = -0.000182086 Jy
! Component: 150  -  total flux cleaned = -0.000104524 Jy
! Component: 200  -  total flux cleaned = -6.68581e-05 Jy
! Total flux subtracted in 200 components = -6.68581e-05 Jy
! Clean residual min=-0.000853 max=0.000810 Jy/beam
! Clean residual mean=0.000002 rms=0.000250 Jy/beam
! Combined flux in latest and established models = 0.0220721 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 25 model components to the UV plane model.
! The established model now contains 79 components and 0.0220721 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025727Jy  sigma=0.671138
! Fit after  self-cal, rms=0.025728Jy  sigma=0.671124
! Inverting map 
print "============== Finished amplitude gscale SELF-CAL =============="
! ============== Finished amplitude gscale SELF-CAL ============== 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025728Jy  sigma=0.671124
! Fit after  self-cal, rms=0.025645Jy  sigma=0.668704
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000231471 Jy
! Component: 100  -  total flux cleaned = 0.000348767 Jy
! Component: 150  -  total flux cleaned = 0.000409826 Jy
! Component: 200  -  total flux cleaned = 0.000447094 Jy
! Total flux subtracted in 200 components = 0.000447094 Jy
! Clean residual min=-0.000823 max=0.000775 Jy/beam
! Clean residual mean=0.000002 rms=0.000241 Jy/beam
! Combined flux in latest and established models = 0.0225191 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 20 model components to the UV plane model.
! The established model now contains 93 components and 0.0225192 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025640Jy  sigma=0.668590
! Fit after  self-cal, rms=0.025634Jy  sigma=0.668425
! Inverting map 
print "=== Finished natural weighting clean with shorter phase_soltime "
! === Finished natural weighting clean with shorter phase_soltime  
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.913 x 8.236 at -21.81 degrees (North through East)
! Clean map  min=-0.00079886  max=0.011268 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "============== Finished amplitude self-cal =============="
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.481 mas, bmaj=8.275 mas, bpa=-26.08 degrees
! Estimated noise=0.759788 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00864691 Jy
! Component: 100  -  total flux cleaned = 0.0115895 Jy
! Component: 150  -  total flux cleaned = 0.0138422 Jy
! Component: 200  -  total flux cleaned = 0.0156064 Jy
! Total flux subtracted in 200 components = 0.0156064 Jy
! Clean residual min=-0.002015 max=0.002109 Jy/beam
! Clean residual mean=0.000002 rms=0.000675 Jy/beam
! Combined flux in latest and established models = 0.0156064 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 29 model components to the UV plane model.
! The established model now contains 29 components and 0.0156064 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.913 mas, bmaj=8.236 mas, bpa=-21.81 degrees
! Estimated noise=0.171399 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00188084 Jy
! Component: 100  -  total flux cleaned = 0.00289974 Jy
! Component: 150  -  total flux cleaned = 0.00357632 Jy
! Component: 200  -  total flux cleaned = 0.00411127 Jy
! Total flux subtracted in 200 components = 0.00411127 Jy
! Clean residual min=-0.000952 max=0.000887 Jy/beam
! Clean residual mean=0.000003 rms=0.000271 Jy/beam
! Combined flux in latest and established models = 0.0197177 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 55 components and 0.0197177 Jy
! Inverting map 
clean
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000430841 Jy
! Component: 100  -  total flux cleaned = 0.000784292 Jy
! Component: 150  -  total flux cleaned = 0.00108666 Jy
! Component: 200  -  total flux cleaned = 0.00135054 Jy
! Total flux subtracted in 200 components = 0.00135054 Jy
! Clean residual min=-0.000939 max=0.000869 Jy/beam
! Clean residual mean=0.000002 rms=0.000256 Jy/beam
! Combined flux in latest and established models = 0.0210683 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 22 model components to the UV plane model.
! The established model now contains 68 components and 0.0210683 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025646Jy  sigma=0.668707
! Fit after  self-cal, rms=0.025648Jy  sigma=0.668699
wmodel J2123+3012_C_map.mod
! Writing 68 model components to file: J2123+3012_C_map.mod
wobs   J2123+3012_C_uvs.fits
! Writing UV FITS file: J2123+3012_C_uvs.fits
wwins  J2123+3012_C_map.win
! wwins: Wrote 1 windows to J2123+3012_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -4.97574e-05 Jy
! Component: 100  -  total flux cleaned = -7.59414e-05 Jy
! Component: 150  -  total flux cleaned = -0.000146321 Jy
! Component: 200  -  total flux cleaned = -0.000157215 Jy
! Component: 250  -  total flux cleaned = -0.000176417 Jy
! Component: 300  -  total flux cleaned = -0.000221626 Jy
! Component: 350  -  total flux cleaned = -0.000255475 Jy
! Component: 400  -  total flux cleaned = -0.000295592 Jy
! Component: 450  -  total flux cleaned = -0.000333124 Jy
! Component: 500  -  total flux cleaned = -0.000376175 Jy
! Component: 550  -  total flux cleaned = -0.000437378 Jy
! Component: 600  -  total flux cleaned = -0.000482857 Jy
! Component: 650  -  total flux cleaned = -0.00051993 Jy
! Component: 700  -  total flux cleaned = -0.00056117 Jy
! Component: 750  -  total flux cleaned = -0.000589527 Jy
! Component: 800  -  total flux cleaned = -0.000611528 Jy
! Component: 850  -  total flux cleaned = -0.000648791 Jy
! Component: 900  -  total flux cleaned = -0.000664281 Jy
! Component: 950  -  total flux cleaned = -0.000689353 Jy
! Component: 1000  -  total flux cleaned = -0.000684363 Jy
! Component: 1050  -  total flux cleaned = -0.00067959 Jy
! Component: 1100  -  total flux cleaned = -0.000679606 Jy
! Component: 1150  -  total flux cleaned = -0.000670262 Jy
! Component: 1200  -  total flux cleaned = -0.000656437 Jy
! Component: 1250  -  total flux cleaned = -0.0006519 Jy
! Component: 1300  -  total flux cleaned = -0.000638397 Jy
! Component: 1350  -  total flux cleaned = -0.000616121 Jy
! Component: 1400  -  total flux cleaned = -0.000580912 Jy
! Component: 1450  -  total flux cleaned = -0.000550434 Jy
! Component: 1500  -  total flux cleaned = -0.000524583 Jy
! Component: 1550  -  total flux cleaned = -0.000511727 Jy
! Component: 1600  -  total flux cleaned = -0.00047771 Jy
! Component: 1650  -  total flux cleaned = -0.000448183 Jy
! Component: 1700  -  total flux cleaned = -0.000427226 Jy
! Component: 1750  -  total flux cleaned = -0.000389707 Jy
! Component: 1800  -  total flux cleaned = -0.000368969 Jy
! Component: 1850  -  total flux cleaned = -0.000340116 Jy
! Component: 1900  -  total flux cleaned = -0.000311384 Jy
! Component: 1950  -  total flux cleaned = -0.000282812 Jy
! Component: 2000  -  total flux cleaned = -0.00025843 Jy
! Component: 2050  -  total flux cleaned = -0.000242228 Jy
! Component: 2100  -  total flux cleaned = -0.000222061 Jy
! Component: 2150  -  total flux cleaned = -0.00018991 Jy
! Component: 2200  -  total flux cleaned = -0.000169876 Jy
! Component: 2250  -  total flux cleaned = -0.000145919 Jy
! Component: 2300  -  total flux cleaned = -0.000129995 Jy
! Component: 2350  -  total flux cleaned = -0.000106155 Jy
! Component: 2400  -  total flux cleaned = -8.63438e-05 Jy
! Component: 2450  -  total flux cleaned = -5.46887e-05 Jy
! Component: 2500  -  total flux cleaned = -2.3077e-05 Jy
! Component: 2550  -  total flux cleaned = -7.29225e-06 Jy
! Component: 2600  -  total flux cleaned = 8.49414e-06 Jy
! Component: 2650  -  total flux cleaned = 2.42576e-05 Jy
! Component: 2700  -  total flux cleaned = 4.00193e-05 Jy
! Component: 2750  -  total flux cleaned = 5.97001e-05 Jy
! Component: 2800  -  total flux cleaned = 7.93623e-05 Jy
! Component: 2850  -  total flux cleaned = 9.5092e-05 Jy
! Component: 2900  -  total flux cleaned = 0.000114759 Jy
! Component: 2950  -  total flux cleaned = 0.000126544 Jy
! Component: 3000  -  total flux cleaned = 0.000138365 Jy
! Component: 3050  -  total flux cleaned = 0.000154111 Jy
! Component: 3100  -  total flux cleaned = 0.000177742 Jy
! Component: 3150  -  total flux cleaned = 0.000189573 Jy
! Component: 3200  -  total flux cleaned = 0.000201411 Jy
! Component: 3250  -  total flux cleaned = 0.000213261 Jy
! Component: 3300  -  total flux cleaned = 0.000225139 Jy
! Component: 3350  -  total flux cleaned = 0.000248921 Jy
! Component: 3400  -  total flux cleaned = 0.000260845 Jy
! Component: 3450  -  total flux cleaned = 0.000276764 Jy
! Component: 3500  -  total flux cleaned = 0.000308708 Jy
! Component: 3550  -  total flux cleaned = 0.0003207 Jy
! Component: 3600  -  total flux cleaned = 0.000356845 Jy
! Component: 3650  -  total flux cleaned = 0.000364927 Jy
! Component: 3700  -  total flux cleaned = 0.000377045 Jy
! Component: 3750  -  total flux cleaned = 0.000401384 Jy
! Component: 3800  -  total flux cleaned = 0.000421769 Jy
! Component: 3850  -  total flux cleaned = 0.00042996 Jy
! Component: 3900  -  total flux cleaned = 0.000446419 Jy
! Component: 3950  -  total flux cleaned = 0.000462949 Jy
! Component: 4000  -  total flux cleaned = 0.000475421 Jy
! Component: 4050  -  total flux cleaned = 0.0004921 Jy
! Total flux subtracted in 4096 components = 0.000496325 Jy
! Clean residual min=-0.000232 max=0.000242 Jy/beam
! Clean residual mean=0.000001 rms=0.000082 Jy/beam
! Combined flux in latest and established models = 0.0215646 Jy
keep
! Adding 305 model components to the UV plane model.
! The established model now contains 373 components and 0.0215646 Jy
![Exited script file: /opt64/bin/pima_mupet_02.dfm]
wmap   /vlbi/vcs9/uvm//J2123+3012_C_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.913 x 8.236 at -21.81 degrees (North through East)
! Clean map  min=-0.00099463  max=0.011389 Jy/beam
! Writing clean map to FITS file: /vlbi/vcs9/uvm//J2123+3012_C_a_map.fits
wmodel /vlbi/vcs9/uvm//J2123+3012_C_a_map.mod
! Writing 373 model components to file: /vlbi/vcs9/uvm//J2123+3012_C_a_map.mod
wobs   /vlbi/vcs9/uvm//J2123+3012_C_a_uvs.fits
! Writing UV FITS file: /vlbi/vcs9/uvm//J2123+3012_C_a_uvs.fits
wwins  /vlbi/vcs9/uvm//J2123+3012_C_a_map.win
! wwins: Wrote 2 windows to /vlbi/vcs9/uvm//J2123+3012_C_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0113891 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 9.56197e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -2.51872 2.51872 5.03745 10.0749 20.1498 40.2996 80.5991
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0002 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.011 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  119.107 
quit
! Quitting program
! Log file /vlbi/vcs9/uvm//J2123+3012_C_a_dfm.log closed on Tue Dec 26 23:02:03 2017