! Started logfile: /vlbi/vcs9/uvm//J2110-1033_X_a_dfm.log on Tue Dec 26 23:01:35 2017 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 7.39200 obs /vlbi/vcs9/uvm//J2110-1033_X_a_uvm.fits ! Reading UV FITS file: /vlbi/vcs9/uvm//J2110-1033_X_a_uvm.fits ! AN table 1: 86 integrations on 45 of 45 possible baselines. ! AN table 2: 100 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.965494 visibilities/baseline/integration-bin. ! Found source: J2110-1033 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 7.392e+09 3.2e+07 1 3.2e+07 ! 02 2 7.424e+09 3.2e+07 1 3.2e+07 ! 03 3 7.456e+09 3.2e+07 1 3.2e+07 ! 04 4 7.552e+09 3.2e+07 1 3.2e+07 ! 05 5 7.744e+09 3.2e+07 1 3.2e+07 ! 06 6 7.776e+09 3.2e+07 1 3.2e+07 ! 07 7 7.808e+09 3.2e+07 1 3.2e+07 ! 08 8 7.84e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 94 lines of history. ! ! Reading 46112 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 8 channels. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_02.dfm J2110-1033_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 60 float amp_soltime2 amp_soltime2 = 5 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.1 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_02.dvm version of 2017.12.26 === " ! === Difmap script: pima_mupet_02.dvm version of 2017.12.26 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.0431514 Jy startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.000939Jy sigma=20.955339 ! Fit after self-cal, rms=0.983386Jy sigma=20.600149 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. peakwin win_mult ! Inverting map and beam ! Estimated beam: bmin=0.7464 mas, bmaj=1.999 mas, bpa=-5.498 degrees ! Estimated noise=0.423955 mJy/beam. ! Added new window around map position (0, 0). flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0144636 Jy ! Component: 100 - total flux cleaned = 0.0168894 Jy ! Total flux subtracted in 100 components = 0.0168894 Jy ! Clean residual min=-0.001748 max=0.001748 Jy/beam ! Clean residual mean=0.000000 rms=0.000436 Jy/beam ! Combined flux in latest and established models = 0.0168894 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.0168894 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.039489Jy sigma=0.723255 ! Fit after self-cal, rms=0.039474Jy sigma=0.722903 ! Inverting map print "============== Finished uniform weighting CLEAN ==============" ! ============== Finished uniform weighting CLEAN ============== ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9199 mas, bmaj=2.471 mas, bpa=-9.329 degrees ! Estimated noise=0.157226 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00152333 Jy ! Component: 100 - total flux cleaned = 0.00229733 Jy ! Component: 150 - total flux cleaned = 0.00272215 Jy ! Component: 200 - total flux cleaned = 0.00285299 Jy ! Total flux subtracted in 200 components = 0.00285299 Jy ! Clean residual min=-0.001388 max=0.001591 Jy/beam ! Clean residual mean=-0.000000 rms=0.000402 Jy/beam ! Combined flux in latest and established models = 0.0197424 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 16 components and 0.0197424 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.039433Jy sigma=0.721910 ! Fit after self-cal, rms=0.039432Jy sigma=0.721899 ! Inverting map print "============== Finished natural weighting CLEAN ==============" ! ============== Finished natural weighting CLEAN ============== ! gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.976529 ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 1.18 HN 0.97 KP 0.79 ! LA 0.87 MK 1.09 NL 1.31 OV 1.33 ! PT 0.86 SC 0.98 ! ! Amplitude normalization factor in sub-array 2: 0.987921 ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 1.06 HN 1.13 LA 1.08 ! MK 0.96 NL 0.80 OV 1.11 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.937331 ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.08 HN 1.26 KP 0.98 ! LA 1.05 MK 1.05 NL 1.30 OV 1.07 ! PT 0.78 SC 0.95 ! ! Amplitude normalization factor in sub-array 2: 0.990494 ! Telescope amplitude corrections in sub-array 2: ! BR 1.26 FD 1.17 HN 1.13 LA 0.92 ! MK 0.90 NL 0.71 OV 0.99 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.882638 ! Telescope amplitude corrections in sub-array 1: ! BR 1.22 FD 1.09 HN 1.14 KP 0.67 ! LA 0.92 MK 1.12 NL 1.42 OV 1.36 ! PT 1.20 SC 1.19 ! ! Amplitude normalization factor in sub-array 2: 0.952551 ! Telescope amplitude corrections in sub-array 2: ! BR 1.39 FD 1.13 HN 1.23 LA 0.95 ! MK 0.99 NL 0.76 OV 0.89 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.01933 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.91 HN 1.03 KP 0.86 ! LA 1.08 MK 0.94 NL 1.25 OV 0.95 ! PT 0.83 SC 1.00 ! ! Amplitude normalization factor in sub-array 2: 0.951932 ! Telescope amplitude corrections in sub-array 2: ! BR 1.33 FD 1.04 HN 1.11 LA 0.95 ! MK 0.81 NL 1.02 OV 1.09 ! ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.928488 ! Telescope amplitude corrections in sub-array 1: ! BR 1.19 FD 1.05 HN 1.10 KP 0.67 ! LA 0.95 MK 1.06 NL 1.33 OV 1.39 ! PT 0.92 SC 1.11 ! ! Amplitude normalization factor in sub-array 2: 1.00102 ! Telescope amplitude corrections in sub-array 2: ! BR 1.12 FD 0.98 HN 1.25 LA 1.06 ! MK 0.95 NL 0.70 OV 0.94 ! ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.958603 ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.13 HN 0.89 KP 0.95 ! LA 0.96 MK 1.19 NL 1.07 OV 1.30 ! PT 0.92 SC 0.96 ! ! Amplitude normalization factor in sub-array 2: 1.01429 ! Telescope amplitude corrections in sub-array 2: ! BR 1.36 FD 1.00 HN 0.85 LA 0.91 ! MK 1.21 NL 0.73 OV 0.83 ! ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.983216 ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.21 HN 1.10 KP 0.78 ! LA 0.95 MK 1.09 NL 1.18 OV 1.17 ! PT 0.77 SC 0.89 ! ! Amplitude normalization factor in sub-array 2: 1.05056 ! Telescope amplitude corrections in sub-array 2: ! BR 1.19 FD 0.83 HN 0.97 LA 1.00 ! MK 0.95 NL 0.93 OV 0.80 ! ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.0105 ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.81 HN 0.98 KP 0.72 ! LA 1.13 MK 1.06 NL 1.40 OV 1.09 ! PT 0.87 SC 0.90 ! ! Amplitude normalization factor in sub-array 2: 1.0608 ! Telescope amplitude corrections in sub-array 2: ! BR 1.16 FD 0.98 HN 0.95 LA 0.93 ! MK 0.86 NL 0.87 OV 0.84 ! ! ! Fit before self-cal, rms=0.039432Jy sigma=0.721899 ! Fit after self-cal, rms=0.038699Jy sigma=0.718452 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.038699Jy sigma=0.718452 ! Fit after self-cal, rms=0.038704Jy sigma=0.718419 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9377 mas, bmaj=2.518 mas, bpa=-9.09 degrees ! Estimated noise=0.14663 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000870353 Jy ! Component: 100 - total flux cleaned = -0.000999244 Jy ! Component: 150 - total flux cleaned = -0.00103421 Jy ! Component: 200 - total flux cleaned = -0.00104225 Jy ! Total flux subtracted in 200 components = -0.00104225 Jy ! Clean residual min=-0.000917 max=0.001312 Jy/beam ! Clean residual mean=-0.000001 rms=0.000277 Jy/beam ! Combined flux in latest and established models = 0.0187001 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 32 components and 0.0187001 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.038699Jy sigma=0.718048 ! Fit after self-cal, rms=0.038699Jy sigma=0.718039 ! Inverting map print "============== Finished amplitude gscale SELF-CAL ==============" ! ============== Finished amplitude gscale SELF-CAL ============== ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.038699Jy sigma=0.718039 ! Fit after self-cal, rms=0.038674Jy sigma=0.716945 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-18.6, -39). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00139917 Jy ! Component: 100 - total flux cleaned = 0.00210463 Jy ! Component: 150 - total flux cleaned = 0.00258868 Jy ! Component: 200 - total flux cleaned = 0.00287908 Jy ! Total flux subtracted in 200 components = 0.00287908 Jy ! Clean residual min=-0.000712 max=0.000822 Jy/beam ! Clean residual mean=-0.000001 rms=0.000213 Jy/beam ! Combined flux in latest and established models = 0.0215792 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 64 components and 0.0215792 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.038639Jy sigma=0.715884 ! Fit after self-cal, rms=0.038635Jy sigma=0.715656 ! Inverting map print "=== Finished natural weighting clean with shorter phase_soltime " ! === Finished natural weighting clean with shorter phase_soltime ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9377 x 2.518 at -9.09 degrees (North through East) ! Clean map min=-0.00071042 max=0.015365 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "============== Finished amplitude self-cal ==============" end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7489 mas, bmaj=2.002 mas, bpa=-5.459 degrees ! Estimated noise=0.405061 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0139512 Jy ! Component: 100 - total flux cleaned = 0.0164335 Jy ! Component: 150 - total flux cleaned = 0.0180189 Jy ! Component: 200 - total flux cleaned = 0.0192118 Jy ! Total flux subtracted in 200 components = 0.0192118 Jy ! Clean residual min=-0.001245 max=0.001485 Jy/beam ! Clean residual mean=-0.000001 rms=0.000347 Jy/beam ! Combined flux in latest and established models = 0.0192118 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.0192118 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9377 mas, bmaj=2.518 mas, bpa=-9.09 degrees ! Estimated noise=0.14663 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.2, -3). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00155139 Jy ! Component: 100 - total flux cleaned = 0.00228911 Jy ! Component: 150 - total flux cleaned = 0.00278487 Jy ! Component: 200 - total flux cleaned = 0.00305777 Jy ! Total flux subtracted in 200 components = 0.00305777 Jy ! Clean residual min=-0.000752 max=0.000822 Jy/beam ! Clean residual mean=-0.000001 rms=0.000206 Jy/beam ! Combined flux in latest and established models = 0.0222695 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 58 components and 0.0222695 Jy ! Inverting map clean ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000158491 Jy ! Component: 100 - total flux cleaned = 0.000281349 Jy ! Component: 150 - total flux cleaned = 0.00035007 Jy ! Component: 200 - total flux cleaned = 0.000412658 Jy ! Total flux subtracted in 200 components = 0.000412658 Jy ! Clean residual min=-0.000718 max=0.000783 Jy/beam ! Clean residual mean=-0.000001 rms=0.000198 Jy/beam ! Combined flux in latest and established models = 0.0226822 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 32 model components to the UV plane model. ! The established model now contains 74 components and 0.0226822 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.038613Jy sigma=0.715279 ! Fit after self-cal, rms=0.038608Jy sigma=0.715143 wmodel J2110-1033_X_map.mod ! Writing 74 model components to file: J2110-1033_X_map.mod wobs J2110-1033_X_uvs.fits ! Writing UV FITS file: J2110-1033_X_uvs.fits wwins J2110-1033_X_map.win ! wwins: Wrote 3 windows to J2110-1033_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00033849 Jy ! Component: 100 - total flux cleaned = 0.000465997 Jy ! Component: 150 - total flux cleaned = 0.000597501 Jy ! Component: 200 - total flux cleaned = 0.000698519 Jy ! Component: 250 - total flux cleaned = 0.00077352 Jy ! Component: 300 - total flux cleaned = 0.000886465 Jy ! Component: 350 - total flux cleaned = 0.00100481 Jy ! Component: 400 - total flux cleaned = 0.00109935 Jy ! Component: 450 - total flux cleaned = 0.00118162 Jy ! Component: 500 - total flux cleaned = 0.00126172 Jy ! Component: 550 - total flux cleaned = 0.00136503 Jy ! Component: 600 - total flux cleaned = 0.00144004 Jy ! Component: 650 - total flux cleaned = 0.00151332 Jy ! Component: 700 - total flux cleaned = 0.00155299 Jy ! Component: 750 - total flux cleaned = 0.00162227 Jy ! Component: 800 - total flux cleaned = 0.00163715 Jy ! Component: 850 - total flux cleaned = 0.00166657 Jy ! Component: 900 - total flux cleaned = 0.00169518 Jy ! Component: 950 - total flux cleaned = 0.00170921 Jy ! Component: 1000 - total flux cleaned = 0.00172301 Jy ! Component: 1050 - total flux cleaned = 0.00174319 Jy ! Component: 1100 - total flux cleaned = 0.00173012 Jy ! Component: 1150 - total flux cleaned = 0.00172382 Jy ! Component: 1200 - total flux cleaned = 0.00172375 Jy ! Component: 1250 - total flux cleaned = 0.00171741 Jy ! Component: 1300 - total flux cleaned = 0.00168676 Jy ! Component: 1350 - total flux cleaned = 0.00166867 Jy ! Component: 1400 - total flux cleaned = 0.00165683 Jy ! Component: 1450 - total flux cleaned = 0.00164518 Jy ! Component: 1500 - total flux cleaned = 0.00162791 Jy ! Component: 1550 - total flux cleaned = 0.00160529 Jy ! Component: 1600 - total flux cleaned = 0.00160515 Jy ! Component: 1650 - total flux cleaned = 0.00157785 Jy ! Component: 1700 - total flux cleaned = 0.00154566 Jy ! Component: 1750 - total flux cleaned = 0.00152456 Jy ! Component: 1800 - total flux cleaned = 0.0015402 Jy ! Component: 1850 - total flux cleaned = 0.00151441 Jy ! Component: 1900 - total flux cleaned = 0.00150431 Jy ! Component: 1950 - total flux cleaned = 0.00150929 Jy ! Component: 2000 - total flux cleaned = 0.00149443 Jy ! Component: 2050 - total flux cleaned = 0.00149436 Jy ! Component: 2100 - total flux cleaned = 0.00148953 Jy ! Component: 2150 - total flux cleaned = 0.00147515 Jy ! Component: 2200 - total flux cleaned = 0.00148462 Jy ! Component: 2250 - total flux cleaned = 0.00147062 Jy ! Component: 2300 - total flux cleaned = 0.00146135 Jy ! Component: 2350 - total flux cleaned = 0.00145682 Jy ! Component: 2400 - total flux cleaned = 0.00144789 Jy ! Component: 2450 - total flux cleaned = 0.00146126 Jy ! Component: 2500 - total flux cleaned = 0.00145679 Jy ! Component: 2550 - total flux cleaned = 0.00145681 Jy ! Component: 2600 - total flux cleaned = 0.00147403 Jy ! Component: 2650 - total flux cleaned = 0.00146545 Jy ! Component: 2700 - total flux cleaned = 0.00146543 Jy ! Component: 2750 - total flux cleaned = 0.0014529 Jy ! Component: 2800 - total flux cleaned = 0.00145707 Jy ! Component: 2850 - total flux cleaned = 0.00145296 Jy ! Component: 2900 - total flux cleaned = 0.00144481 Jy ! Component: 2950 - total flux cleaned = 0.0014609 Jy ! Component: 3000 - total flux cleaned = 0.00146488 Jy ! Component: 3050 - total flux cleaned = 0.00146882 Jy ! Component: 3100 - total flux cleaned = 0.0014532 Jy ! Component: 3150 - total flux cleaned = 0.00146097 Jy ! Component: 3200 - total flux cleaned = 0.00146098 Jy ! Component: 3250 - total flux cleaned = 0.00145716 Jy ! Component: 3300 - total flux cleaned = 0.00146095 Jy ! Component: 3350 - total flux cleaned = 0.00146091 Jy ! Component: 3400 - total flux cleaned = 0.00145345 Jy ! Component: 3450 - total flux cleaned = 0.00146084 Jy ! Component: 3500 - total flux cleaned = 0.00147168 Jy ! Component: 3550 - total flux cleaned = 0.00147524 Jy ! Component: 3600 - total flux cleaned = 0.00148597 Jy ! Component: 3650 - total flux cleaned = 0.0014895 Jy ! Component: 3700 - total flux cleaned = 0.00148595 Jy ! Component: 3750 - total flux cleaned = 0.00149645 Jy ! Component: 3800 - total flux cleaned = 0.00149302 Jy ! Component: 3850 - total flux cleaned = 0.00151366 Jy ! Component: 3900 - total flux cleaned = 0.00151371 Jy ! Component: 3950 - total flux cleaned = 0.00151707 Jy ! Component: 4000 - total flux cleaned = 0.00151038 Jy ! Component: 4050 - total flux cleaned = 0.00151705 Jy ! Total flux subtracted in 4096 components = 0.00152034 Jy ! Clean residual min=-0.000165 max=0.000187 Jy/beam ! Clean residual mean=-0.000000 rms=0.000060 Jy/beam ! Combined flux in latest and established models = 0.0242025 Jy keep ! Adding 342 model components to the UV plane model. ! The established model now contains 416 components and 0.0242025 Jy ![Exited script file: /opt64/bin/pima_mupet_02.dfm] wmap /vlbi/vcs9/uvm//J2110-1033_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9377 x 2.518 at -9.09 degrees (North through East) ! Clean map min=-0.00036243 max=0.015726 Jy/beam ! Writing clean map to FITS file: /vlbi/vcs9/uvm//J2110-1033_X_a_map.fits wmodel /vlbi/vcs9/uvm//J2110-1033_X_a_map.mod ! Writing 416 model components to file: /vlbi/vcs9/uvm//J2110-1033_X_a_map.mod wobs /vlbi/vcs9/uvm//J2110-1033_X_a_uvs.fits ! Writing UV FITS file: /vlbi/vcs9/uvm//J2110-1033_X_a_uvs.fits wwins /vlbi/vcs9/uvm//J2110-1033_X_a_map.win ! wwins: Wrote 4 windows to /vlbi/vcs9/uvm//J2110-1033_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0157263 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 5.98634e-05 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.14197 1.14197 2.28395 4.56789 9.13579 18.2716 36.5432 73.0863 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0001 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.015 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 262.703 quit ! Quitting program ! Log file /vlbi/vcs9/uvm//J2110-1033_X_a_dfm.log closed on Tue Dec 26 23:01:40 2017