! Started logfile: /vlbi/vcs9/uvm//J2045+3233_X_a_dfm.log on Tue Dec 26 22:59:50 2017 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 7.39200 obs /vlbi/vcs9/uvm//J2045+3233_X_a_uvm.fits ! Reading UV FITS file: /vlbi/vcs9/uvm//J2045+3233_X_a_uvm.fits ! AN table 1: 96 integrations on 28 of 28 possible baselines. ! AN table 2: 120 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.874287 visibilities/baseline/integration-bin. ! Found source: J2045+3233 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 7.392e+09 3.2e+07 1 3.2e+07 ! 02 2 7.424e+09 3.2e+07 1 3.2e+07 ! 03 3 7.456e+09 3.2e+07 1 3.2e+07 ! 04 4 7.552e+09 3.2e+07 1 3.2e+07 ! 05 5 7.744e+09 3.2e+07 1 3.2e+07 ! 06 6 7.776e+09 3.2e+07 1 3.2e+07 ! 07 7 7.808e+09 3.2e+07 1 3.2e+07 ! 08 8 7.84e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 94 lines of history. ! ! Reading 49016 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 8 channels. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_02.dfm J2045+3233_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 60 float amp_soltime2 amp_soltime2 = 5 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.1 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_02.dvm version of 2017.12.26 === " ! === Difmap script: pima_mupet_02.dvm version of 2017.12.26 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.0346098 Jy startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 14 telescope corrections were flagged in sub-array 1. ! A total of 168 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 14 telescope corrections were flagged in sub-array 1. ! A total of 168 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 14 telescope corrections were flagged in sub-array 1. ! A total of 168 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 14 telescope corrections were flagged in sub-array 1. ! A total of 168 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 14 telescope corrections were flagged in sub-array 1. ! A total of 168 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 14 telescope corrections were flagged in sub-array 1. ! A total of 168 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 14 telescope corrections were flagged in sub-array 1. ! A total of 168 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 14 telescope corrections were flagged in sub-array 1. ! A total of 168 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.000901Jy sigma=24.513342 ! Fit after self-cal, rms=0.987915Jy sigma=24.224607 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. peakwin win_mult ! Inverting map and beam ! Estimated beam: bmin=0.6376 mas, bmaj=2.378 mas, bpa=-4.263 degrees ! Estimated noise=0.287046 mJy/beam. ! Added new window around map position (0, 0). flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0103066 Jy ! Component: 100 - total flux cleaned = 0.0117068 Jy ! Total flux subtracted in 100 components = 0.0117068 Jy ! Clean residual min=-0.001069 max=0.000984 Jy/beam ! Clean residual mean=-0.000000 rms=0.000231 Jy/beam ! Combined flux in latest and established models = 0.0117068 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0117068 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.032237Jy sigma=0.672216 ! Fit after self-cal, rms=0.032227Jy sigma=0.671950 ! Inverting map print "============== Finished uniform weighting CLEAN ==============" ! ============== Finished uniform weighting CLEAN ============== ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8459 mas, bmaj=2.673 mas, bpa=-4.603 degrees ! Estimated noise=0.130448 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000273824 Jy ! Component: 100 - total flux cleaned = 0.000274877 Jy ! Component: 150 - total flux cleaned = 0.000252879 Jy ! Component: 200 - total flux cleaned = 0.000234306 Jy ! Total flux subtracted in 200 components = 0.000234306 Jy ! Clean residual min=-0.000652 max=0.000620 Jy/beam ! Clean residual mean=0.000000 rms=0.000141 Jy/beam ! Combined flux in latest and established models = 0.0119411 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 16 components and 0.0119411 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.032218Jy sigma=0.671867 ! Fit after self-cal, rms=0.032218Jy sigma=0.671865 ! Inverting map print "============== Finished natural weighting CLEAN ==============" ! ============== Finished natural weighting CLEAN ============== ! gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.0419 ! Telescope amplitude corrections in sub-array 1: ! FD 0.87 KP 0.95 LA 1.01 MK 1.10 ! NL 1.08 OV 0.95 PT 0.68 SC 1.04 ! ! A total of 33 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 0.955086 ! Telescope amplitude corrections in sub-array 2: ! BR 0.70 FD 1.03 HN 1.22 LA 1.19 ! MK 1.14 NL 0.83 OV 0.92 PT 1.30 ! SC 1.09 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.989505 ! Telescope amplitude corrections in sub-array 1: ! FD 1.09 KP 0.96 LA 1.23 MK 1.13 ! NL 0.85 OV 1.13 PT 0.67 SC 1.02 ! ! A total of 33 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 0.900192 ! Telescope amplitude corrections in sub-array 2: ! BR 0.87 FD 1.16 HN 1.31 LA 1.38 ! MK 1.02 NL 0.93 OV 1.03 PT 1.22 ! SC 1.08 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.00488 ! Telescope amplitude corrections in sub-array 1: ! FD 1.05 KP 1.00 LA 1.30 MK 0.90 ! NL 1.04 OV 0.93 PT 0.71 SC 1.04 ! ! A total of 33 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 0.929091 ! Telescope amplitude corrections in sub-array 2: ! BR 0.82 FD 0.99 HN 1.19 LA 1.36 ! MK 1.13 NL 0.85 OV 1.02 PT 1.24 ! SC 1.09 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.00187 ! Telescope amplitude corrections in sub-array 1: ! FD 1.05 KP 0.97 LA 1.25 MK 0.96 ! NL 0.97 OV 1.13 PT 0.67 SC 0.98 ! ! A total of 33 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 0.989264 ! Telescope amplitude corrections in sub-array 2: ! BR 0.73 FD 1.11 HN 1.18 LA 0.90 ! MK 1.02 NL 1.00 OV 1.00 PT 0.93 ! SC 1.22 ! ! ! Correcting IF 5. ! Amplitude normalization factor in sub-array 1: 1.01275 ! Telescope amplitude corrections in sub-array 1: ! FD 0.92 KP 0.90 LA 1.17 MK 1.09 ! NL 0.87 OV 1.25 PT 0.56 SC 1.14 ! ! A total of 33 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 0.969376 ! Telescope amplitude corrections in sub-array 2: ! BR 0.77 FD 1.38 HN 1.16 LA 1.06 ! MK 0.90 NL 0.80 OV 1.18 PT 0.92 ! SC 1.11 ! ! ! Correcting IF 6. ! Amplitude normalization factor in sub-array 1: 1.05037 ! Telescope amplitude corrections in sub-array 1: ! FD 0.99 KP 0.99 LA 1.06 MK 1.18 ! NL 1.00 OV 0.83 PT 0.68 SC 0.90 ! ! A total of 33 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 0.979798 ! Telescope amplitude corrections in sub-array 2: ! BR 0.87 FD 1.41 HN 0.92 LA 1.19 ! MK 1.00 NL 0.77 OV 0.91 PT 1.04 ! SC 1.07 ! ! ! Correcting IF 7. ! Amplitude normalization factor in sub-array 1: 1.08327 ! Telescope amplitude corrections in sub-array 1: ! FD 1.02 KP 0.84 LA 1.03 MK 0.98 ! NL 1.04 OV 0.84 PT 0.66 SC 0.98 ! ! A total of 33 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 1.02455 ! Telescope amplitude corrections in sub-array 2: ! BR 0.68 FD 1.09 HN 1.07 LA 0.96 ! MK 0.90 NL 1.03 OV 0.95 PT 0.96 ! SC 1.15 ! ! ! Correcting IF 8. ! Amplitude normalization factor in sub-array 1: 1.06347 ! Telescope amplitude corrections in sub-array 1: ! FD 1.01 KP 0.93 LA 1.02 MK 1.07 ! NL 1.25 OV 0.93 PT 0.57 SC 0.74 ! ! A total of 33 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 1.05063 ! Telescope amplitude corrections in sub-array 2: ! BR 0.72 FD 1.15 HN 1.13 LA 1.10 ! MK 0.92 NL 0.91 OV 0.85 PT 0.87 ! SC 0.92 ! ! ! Fit before self-cal, rms=0.032218Jy sigma=0.671865 ! Fit after self-cal, rms=0.029812Jy sigma=0.670459 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.029812Jy sigma=0.670459 ! Fit after self-cal, rms=0.029813Jy sigma=0.670452 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8692 mas, bmaj=2.612 mas, bpa=-4.062 degrees ! Estimated noise=0.128218 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 8.88522e-05 Jy ! Component: 100 - total flux cleaned = 0.000118538 Jy ! Component: 150 - total flux cleaned = 0.0001435 Jy ! Component: 200 - total flux cleaned = 0.000164353 Jy ! Total flux subtracted in 200 components = 0.000164353 Jy ! Clean residual min=-0.000447 max=0.000461 Jy/beam ! Clean residual mean=-0.000000 rms=0.000109 Jy/beam ! Combined flux in latest and established models = 0.0121055 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 24 components and 0.0121055 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.029812Jy sigma=0.670423 ! Fit after self-cal, rms=0.029812Jy sigma=0.670422 ! Inverting map print "============== Finished amplitude gscale SELF-CAL ==============" ! ============== Finished amplitude gscale SELF-CAL ============== ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.029812Jy sigma=0.670422 ! Fit after self-cal, rms=0.029752Jy sigma=0.668807 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000144215 Jy ! Component: 100 - total flux cleaned = 0.000184025 Jy ! Component: 150 - total flux cleaned = 0.000195074 Jy ! Component: 200 - total flux cleaned = 0.000204466 Jy ! Total flux subtracted in 200 components = 0.000204466 Jy ! Clean residual min=-0.000458 max=0.000447 Jy/beam ! Clean residual mean=-0.000000 rms=0.000108 Jy/beam ! Combined flux in latest and established models = 0.01231 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 27 components and 0.01231 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.029751Jy sigma=0.668792 ! Fit after self-cal, rms=0.029747Jy sigma=0.668637 ! Inverting map print "=== Finished natural weighting clean with shorter phase_soltime " ! === Finished natural weighting clean with shorter phase_soltime ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8692 x 2.612 at -4.062 degrees (North through East) ! Clean map min=-0.00044479 max=0.011863 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "============== Finished amplitude self-cal ==============" end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.646 mas, bmaj=2.348 mas, bpa=-3.977 degrees ! Estimated noise=0.286908 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0102726 Jy ! Component: 100 - total flux cleaned = 0.0116557 Jy ! Component: 150 - total flux cleaned = 0.0119796 Jy ! Component: 200 - total flux cleaned = 0.0120344 Jy ! Total flux subtracted in 200 components = 0.0120344 Jy ! Clean residual min=-0.000793 max=0.000862 Jy/beam ! Clean residual mean=-0.000000 rms=0.000208 Jy/beam ! Combined flux in latest and established models = 0.0120344 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.0120344 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8692 mas, bmaj=2.612 mas, bpa=-4.062 degrees ! Estimated noise=0.128218 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00022502 Jy ! Component: 100 - total flux cleaned = 0.000207594 Jy ! Component: 150 - total flux cleaned = 0.000207479 Jy ! Component: 200 - total flux cleaned = 0.000210409 Jy ! Total flux subtracted in 200 components = 0.000210409 Jy ! Clean residual min=-0.000461 max=0.000458 Jy/beam ! Clean residual mean=-0.000000 rms=0.000109 Jy/beam ! Combined flux in latest and established models = 0.0122448 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 21 components and 0.0122448 Jy ! Inverting map clean ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 2.45209e-06 Jy ! Component: 100 - total flux cleaned = 7.17408e-06 Jy ! Component: 150 - total flux cleaned = 1.37957e-05 Jy ! Component: 200 - total flux cleaned = 1.98477e-05 Jy ! Total flux subtracted in 200 components = 1.98477e-05 Jy ! Clean residual min=-0.000458 max=0.000455 Jy/beam ! Clean residual mean=-0.000000 rms=0.000109 Jy/beam ! Combined flux in latest and established models = 0.0122647 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 27 components and 0.0122647 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.029747Jy sigma=0.668642 ! Fit after self-cal, rms=0.029747Jy sigma=0.668619 wmodel J2045+3233_X_map.mod ! Writing 27 model components to file: J2045+3233_X_map.mod wobs J2045+3233_X_uvs.fits ! Writing UV FITS file: J2045+3233_X_uvs.fits wwins J2045+3233_X_map.win ! wwins: Wrote 1 windows to J2045+3233_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -5.05774e-05 Jy ! Component: 100 - total flux cleaned = -5.08986e-05 Jy ! Component: 150 - total flux cleaned = -2.9566e-05 Jy ! Component: 200 - total flux cleaned = -2.94379e-05 Jy ! Component: 250 - total flux cleaned = -3.59033e-05 Jy ! Component: 300 - total flux cleaned = -6.13031e-05 Jy ! Component: 350 - total flux cleaned = -9.82772e-05 Jy ! Component: 400 - total flux cleaned = -0.000110342 Jy ! Component: 450 - total flux cleaned = -0.000121929 Jy ! Component: 500 - total flux cleaned = -0.000133066 Jy ! Component: 550 - total flux cleaned = -0.000143934 Jy ! Component: 600 - total flux cleaned = -0.000154719 Jy ! Component: 650 - total flux cleaned = -0.000170279 Jy ! Component: 700 - total flux cleaned = -0.000175321 Jy ! Component: 750 - total flux cleaned = -0.000175269 Jy ! Component: 800 - total flux cleaned = -0.000180265 Jy ! Component: 850 - total flux cleaned = -0.000194795 Jy ! Component: 900 - total flux cleaned = -0.000194932 Jy ! Component: 950 - total flux cleaned = -0.000208895 Jy ! Component: 1000 - total flux cleaned = -0.000213411 Jy ! Component: 1050 - total flux cleaned = -0.000217834 Jy ! Component: 1100 - total flux cleaned = -0.000222221 Jy ! Component: 1150 - total flux cleaned = -0.000222194 Jy ! Component: 1200 - total flux cleaned = -0.000234922 Jy ! Component: 1250 - total flux cleaned = -0.00023067 Jy ! Component: 1300 - total flux cleaned = -0.000238985 Jy ! Component: 1350 - total flux cleaned = -0.000259553 Jy ! Component: 1400 - total flux cleaned = -0.000271632 Jy ! Component: 1450 - total flux cleaned = -0.000275605 Jy ! Component: 1500 - total flux cleaned = -0.00027559 Jy ! Component: 1550 - total flux cleaned = -0.000279429 Jy ! Component: 1600 - total flux cleaned = -0.000279466 Jy ! Component: 1650 - total flux cleaned = -0.000279474 Jy ! Component: 1700 - total flux cleaned = -0.000286974 Jy ! Component: 1750 - total flux cleaned = -0.000309171 Jy ! Component: 1800 - total flux cleaned = -0.000312841 Jy ! Component: 1850 - total flux cleaned = -0.000320006 Jy ! Component: 1900 - total flux cleaned = -0.000312885 Jy ! Component: 1950 - total flux cleaned = -0.000319922 Jy ! Component: 2000 - total flux cleaned = -0.000309452 Jy ! Component: 2050 - total flux cleaned = -0.000316405 Jy ! Component: 2100 - total flux cleaned = -0.000316438 Jy ! Component: 2150 - total flux cleaned = -0.000316402 Jy ! Component: 2200 - total flux cleaned = -0.000309651 Jy ! Component: 2250 - total flux cleaned = -0.000296351 Jy ! Component: 2300 - total flux cleaned = -0.000296333 Jy ! Component: 2350 - total flux cleaned = -0.000283234 Jy ! Component: 2400 - total flux cleaned = -0.000263811 Jy ! Component: 2450 - total flux cleaned = -0.000257367 Jy ! Component: 2500 - total flux cleaned = -0.000260547 Jy ! Component: 2550 - total flux cleaned = -0.000238394 Jy ! Component: 2600 - total flux cleaned = -0.00024156 Jy ! Component: 2650 - total flux cleaned = -0.000238462 Jy ! Component: 2700 - total flux cleaned = -0.0002292 Jy ! Component: 2750 - total flux cleaned = -0.000220032 Jy ! Component: 2800 - total flux cleaned = -0.000216982 Jy ! Component: 2850 - total flux cleaned = -0.000207941 Jy ! Component: 2900 - total flux cleaned = -0.000198958 Jy ! Component: 2950 - total flux cleaned = -0.000193054 Jy ! Component: 3000 - total flux cleaned = -0.000178361 Jy ! Component: 3050 - total flux cleaned = -0.000166775 Jy ! Component: 3100 - total flux cleaned = -0.000163919 Jy ! Component: 3150 - total flux cleaned = -0.000152458 Jy ! Component: 3200 - total flux cleaned = -0.000149629 Jy ! Component: 3250 - total flux cleaned = -0.000149627 Jy ! Component: 3300 - total flux cleaned = -0.000135616 Jy ! Component: 3350 - total flux cleaned = -0.000132844 Jy ! Component: 3400 - total flux cleaned = -0.000124541 Jy ! Component: 3450 - total flux cleaned = -0.000110861 Jy ! Component: 3500 - total flux cleaned = -0.00011632 Jy ! Component: 3550 - total flux cleaned = -0.000110907 Jy ! Component: 3600 - total flux cleaned = -0.000100187 Jy ! Component: 3650 - total flux cleaned = -0.000102871 Jy ! Component: 3700 - total flux cleaned = -8.96634e-05 Jy ! Component: 3750 - total flux cleaned = -8.44039e-05 Jy ! Component: 3800 - total flux cleaned = -8.69976e-05 Jy ! Component: 3850 - total flux cleaned = -8.18017e-05 Jy ! Component: 3900 - total flux cleaned = -7.66321e-05 Jy ! Component: 3950 - total flux cleaned = -7.92274e-05 Jy ! Component: 4000 - total flux cleaned = -7.66759e-05 Jy ! Component: 4050 - total flux cleaned = -7.16295e-05 Jy ! Total flux subtracted in 4096 components = -7.66624e-05 Jy ! Clean residual min=-0.000138 max=0.000143 Jy/beam ! Clean residual mean=-0.000000 rms=0.000045 Jy/beam ! Combined flux in latest and established models = 0.012188 Jy keep ! Adding 332 model components to the UV plane model. ! The established model now contains 359 components and 0.012188 Jy ![Exited script file: /opt64/bin/pima_mupet_02.dfm] wmap /vlbi/vcs9/uvm//J2045+3233_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8692 x 2.612 at -4.062 degrees (North through East) ! Clean map min=-0.00027815 max=0.011901 Jy/beam ! Writing clean map to FITS file: /vlbi/vcs9/uvm//J2045+3233_X_a_map.fits wmodel /vlbi/vcs9/uvm//J2045+3233_X_a_map.mod ! Writing 359 model components to file: /vlbi/vcs9/uvm//J2045+3233_X_a_map.mod wobs /vlbi/vcs9/uvm//J2045+3233_X_a_uvs.fits ! Writing UV FITS file: /vlbi/vcs9/uvm//J2045+3233_X_a_uvs.fits wwins /vlbi/vcs9/uvm//J2045+3233_X_a_map.win ! wwins: Wrote 2 windows to /vlbi/vcs9/uvm//J2045+3233_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0119007 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 4.46479e-05 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.12551 1.12551 2.25102 4.50203 9.00407 18.0081 36.0163 72.0325 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0001 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.011 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 266.546 quit ! Quitting program ! Log file /vlbi/vcs9/uvm//J2045+3233_X_a_dfm.log closed on Tue Dec 26 22:59:55 2017