! Started logfile: /vlbi/vcs9/uvm//J2045+3233_C_a_dfm.log on Tue Dec 26 22:59:45 2017 float field_size field_size = 1024 float field_cell field_cell = 0.3000 float taper_size taper_size = 40.0 float freq freq = 4.12800 obs /vlbi/vcs9/uvm//J2045+3233_C_a_uvm.fits ! Reading UV FITS file: /vlbi/vcs9/uvm//J2045+3233_C_a_uvm.fits ! AN table 1: 96 integrations on 28 of 28 possible baselines. ! AN table 2: 120 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.874287 visibilities/baseline/integration-bin. ! Found source: J2045+3233 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 4.128e+09 3.2e+07 1 3.2e+07 ! 02 2 4.16e+09 3.2e+07 1 3.2e+07 ! 03 3 4.192e+09 3.2e+07 1 3.2e+07 ! 04 4 4.224e+09 3.2e+07 1 3.2e+07 ! 05 5 4.416e+09 3.2e+07 1 3.2e+07 ! 06 6 4.512e+09 3.2e+07 1 3.2e+07 ! 07 7 4.544e+09 3.2e+07 1 3.2e+07 ! 08 8 4.576e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 94 lines of history. ! ! Reading 49016 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 8 channels. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.3 print "taper_size =", taper_size ! taper_size = 40 ![@/opt64/bin/pima_mupet_02.dfm J2045+3233_C] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 60 float amp_soltime2 amp_soltime2 = 5 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.1 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_02.dvm version of 2017.12.26 === " ! === Difmap script: pima_mupet_02.dvm version of 2017.12.26 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.0290917 Jy startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 14 telescope corrections were flagged in sub-array 1. ! A total of 168 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 14 telescope corrections were flagged in sub-array 1. ! A total of 168 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 14 telescope corrections were flagged in sub-array 1. ! A total of 168 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 14 telescope corrections were flagged in sub-array 1. ! A total of 168 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 14 telescope corrections were flagged in sub-array 1. ! A total of 168 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 14 telescope corrections were flagged in sub-array 1. ! A total of 168 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 14 telescope corrections were flagged in sub-array 1. ! A total of 168 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 14 telescope corrections were flagged in sub-array 1. ! A total of 168 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.000266Jy sigma=30.992593 ! Fit after self-cal, rms=0.990264Jy sigma=30.707285 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. peakwin win_mult ! Inverting map and beam ! Estimated beam: bmin=1.149 mas, bmaj=4.165 mas, bpa=-3.292 degrees ! Estimated noise=0.223587 mJy/beam. ! Added new window around map position (0, 0). flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00739083 Jy ! Component: 100 - total flux cleaned = 0.00865713 Jy ! Total flux subtracted in 100 components = 0.00865713 Jy ! Clean residual min=-0.001177 max=0.001003 Jy/beam ! Clean residual mean=0.000000 rms=0.000221 Jy/beam ! Combined flux in latest and established models = 0.00865713 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.00865713 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.027314Jy sigma=0.727423 ! Fit after self-cal, rms=0.027300Jy sigma=0.726951 ! Inverting map print "============== Finished uniform weighting CLEAN ==============" ! ============== Finished uniform weighting CLEAN ============== ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.538 mas, bmaj=4.598 mas, bpa=-3.795 degrees ! Estimated noise=0.103108 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00211462 Jy ! Component: 100 - total flux cleaned = 0.00341586 Jy ! Component: 150 - total flux cleaned = 0.00425799 Jy ! Component: 200 - total flux cleaned = 0.00480329 Jy ! Total flux subtracted in 200 components = 0.00480329 Jy ! Clean residual min=-0.001290 max=0.001439 Jy/beam ! Clean residual mean=0.000005 rms=0.000566 Jy/beam ! Combined flux in latest and established models = 0.0134604 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 30 components and 0.0134604 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.027127Jy sigma=0.722167 ! Fit after self-cal, rms=0.027127Jy sigma=0.722139 ! Inverting map print "============== Finished natural weighting CLEAN ==============" ! ============== Finished natural weighting CLEAN ============== ! gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.0497 ! Telescope amplitude corrections in sub-array 1: ! FD 0.88 KP 1.27 LA 0.89 MK 0.83 ! NL 1.01 OV 1.30 PT 0.63 SC 0.82 ! ! A total of 33 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 0.787512 ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 1.56 HN 1.81 LA 0.47 ! MK 1.06 NL 1.82 OV 2.00 PT 0.51 ! SC 1.26 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.993461 ! Telescope amplitude corrections in sub-array 1: ! FD 0.94 KP 1.18 LA 0.66 MK 1.04 ! NL 1.29 OV 1.46 PT 0.44 SC 1.04 ! ! A total of 33 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 0.730893 ! Telescope amplitude corrections in sub-array 2: ! BR 1.20 FD 1.86 HN 1.48 LA 0.50 ! MK 1.11 NL 2.06 OV 2.16 PT 0.55 ! SC 1.39 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.04565 ! Telescope amplitude corrections in sub-array 1: ! FD 1.00 KP 1.14 LA 0.79 MK 0.86 ! NL 0.95 OV 1.37 PT 0.52 SC 1.02 ! ! A total of 33 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 0.829936 ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.35 HN 1.33 LA 0.60 ! MK 0.97 NL 1.78 OV 1.77 PT 0.72 ! SC 1.33 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.05438 ! Telescope amplitude corrections in sub-array 1: ! FD 1.18 KP 1.22 LA 0.96 MK 0.81 ! NL 0.98 OV 1.04 PT 0.56 SC 0.83 ! ! A total of 33 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 0.692192 ! Telescope amplitude corrections in sub-array 2: ! BR 1.19 FD 1.48 HN 1.58 LA 0.50 ! MK 1.46 NL 2.81 OV 2.16 PT 0.46 ! SC 1.37 ! ! ! Correcting IF 5. ! Amplitude normalization factor in sub-array 1: 0.996708 ! Telescope amplitude corrections in sub-array 1: ! FD 0.98 KP 1.41 LA 0.91 MK 0.94 ! NL 0.87 OV 1.44 PT 0.54 SC 0.94 ! ! A total of 33 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 0.7117 ! Telescope amplitude corrections in sub-array 2: ! BR 1.17 FD 2.25 HN 1.49 LA 0.50 ! MK 1.19 NL 1.61 OV 2.38 PT 0.54 ! SC 1.50 ! ! ! Correcting IF 6. ! Amplitude normalization factor in sub-array 1: 0.950693 ! Telescope amplitude corrections in sub-array 1: ! FD 1.39 KP 1.56 LA 0.85 MK 0.99 ! NL 0.96 OV 1.32 PT 0.54 SC 0.81 ! ! A total of 33 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 0.802892 ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 1.23 HN 1.27 LA 0.55 ! MK 1.25 NL 1.76 OV 2.22 PT 0.59 ! SC 1.37 ! ! ! Correcting IF 7. ! Amplitude normalization factor in sub-array 1: 0.977102 ! Telescope amplitude corrections in sub-array 1: ! FD 1.25 KP 1.06 LA 0.82 MK 0.92 ! NL 1.08 OV 1.32 PT 0.57 SC 1.17 ! ! A total of 33 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 0.799936 ! Telescope amplitude corrections in sub-array 2: ! BR 0.92 FD 1.19 HN 1.47 LA 0.60 ! MK 1.29 NL 1.56 OV 2.17 PT 0.79 ! SC 1.26 ! ! ! Correcting IF 8. ! Amplitude normalization factor in sub-array 1: 0.978278 ! Telescope amplitude corrections in sub-array 1: ! FD 1.26 KP 1.12 LA 1.00 MK 1.04 ! NL 0.99 OV 1.21 PT 0.64 SC 0.92 ! ! A total of 33 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 0.774081 ! Telescope amplitude corrections in sub-array 2: ! BR 1.06 FD 1.20 HN 1.37 LA 0.81 ! MK 1.19 NL 1.61 OV 2.12 PT 0.94 ! SC 1.32 ! ! ! Fit before self-cal, rms=0.027127Jy sigma=0.722139 ! Fit after self-cal, rms=0.025270Jy sigma=0.737374 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.025270Jy sigma=0.737374 ! Fit after self-cal, rms=0.025285Jy sigma=0.736924 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.902 mas, bmaj=5.485 mas, bpa=-1.951 degrees ! Estimated noise=0.0644345 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00350367 Jy ! Component: 100 - total flux cleaned = -0.00445378 Jy ! Component: 150 - total flux cleaned = -0.00482819 Jy ! Component: 200 - total flux cleaned = -0.00493654 Jy ! Total flux subtracted in 200 components = -0.00493654 Jy ! Clean residual min=-0.000507 max=0.000649 Jy/beam ! Clean residual mean=-0.000002 rms=0.000151 Jy/beam ! Combined flux in latest and established models = 0.00852389 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 47 model components to the UV plane model. ! The established model now contains 73 components and 0.00852389 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.025380Jy sigma=0.709312 ! Fit after self-cal, rms=0.025380Jy sigma=0.709309 ! Inverting map print "============== Finished amplitude gscale SELF-CAL ==============" ! ============== Finished amplitude gscale SELF-CAL ============== ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.025380Jy sigma=0.709309 ! Fit after self-cal, rms=0.025368Jy sigma=0.707124 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 7.62535e-05 Jy ! Component: 100 - total flux cleaned = 5.46347e-05 Jy ! Component: 150 - total flux cleaned = 3.63759e-05 Jy ! Component: 200 - total flux cleaned = 2.3924e-05 Jy ! Total flux subtracted in 200 components = 2.3924e-05 Jy ! Clean residual min=-0.000502 max=0.000665 Jy/beam ! Clean residual mean=-0.000002 rms=0.000150 Jy/beam ! Combined flux in latest and established models = 0.00854781 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 78 components and 0.00854781 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.025353Jy sigma=0.707031 ! Fit after self-cal, rms=0.025360Jy sigma=0.706866 ! Inverting map print "=== Finished natural weighting clean with shorter phase_soltime " ! === Finished natural weighting clean with shorter phase_soltime ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.902 x 5.485 at -1.951 degrees (North through East) ! Clean map min=-0.00049059 max=0.0063636 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "============== Finished amplitude self-cal ==============" end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.182 mas, bmaj=4.219 mas, bpa=-3.098 degrees ! Estimated noise=0.183814 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00605058 Jy ! Component: 100 - total flux cleaned = 0.0072222 Jy ! Component: 150 - total flux cleaned = 0.00783297 Jy ! Component: 200 - total flux cleaned = 0.00828963 Jy ! Total flux subtracted in 200 components = 0.00828963 Jy ! Clean residual min=-0.000864 max=0.001097 Jy/beam ! Clean residual mean=-0.000001 rms=0.000192 Jy/beam ! Combined flux in latest and established models = 0.00828963 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.00828963 Jy ! Inverting map and beam ! Estimated beam: bmin=1.902 mas, bmaj=5.485 mas, bpa=-1.951 degrees ! Estimated noise=0.0644345 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.4, 11.7). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000214172 Jy ! Component: 100 - total flux cleaned = 0.000272651 Jy ! Component: 150 - total flux cleaned = 0.000311219 Jy ! Component: 200 - total flux cleaned = 0.000325298 Jy ! Total flux subtracted in 200 components = 0.000325298 Jy ! Clean residual min=-0.000467 max=0.000513 Jy/beam ! Clean residual mean=-0.000002 rms=0.000141 Jy/beam ! Combined flux in latest and established models = 0.00861493 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 40 components and 0.00861493 Jy ! Inverting map clean ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.2632e-05 Jy ! Component: 100 - total flux cleaned = 3.36567e-05 Jy ! Component: 150 - total flux cleaned = 4.23945e-05 Jy ! Component: 200 - total flux cleaned = 5.00384e-05 Jy ! Total flux subtracted in 200 components = 5.00384e-05 Jy ! Clean residual min=-0.000436 max=0.000502 Jy/beam ! Clean residual mean=-0.000002 rms=0.000137 Jy/beam ! Combined flux in latest and established models = 0.00866497 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 60 components and 0.00866497 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.025269Jy sigma=0.704172 ! Fit after self-cal, rms=0.025250Jy sigma=0.703828 wmodel J2045+3233_C_map.mod ! Writing 60 model components to file: J2045+3233_C_map.mod wobs J2045+3233_C_uvs.fits ! Writing UV FITS file: J2045+3233_C_uvs.fits wwins J2045+3233_C_map.win ! wwins: Wrote 2 windows to J2045+3233_C_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000123071 Jy ! Component: 100 - total flux cleaned = 0.000169982 Jy ! Component: 150 - total flux cleaned = 0.000221706 Jy ! Component: 200 - total flux cleaned = 0.000249777 Jy ! Component: 250 - total flux cleaned = 0.000290643 Jy ! Component: 300 - total flux cleaned = 0.000343048 Jy ! Component: 350 - total flux cleaned = 0.000387562 Jy ! Component: 400 - total flux cleaned = 0.000443205 Jy ! Component: 450 - total flux cleaned = 0.000497279 Jy ! Component: 500 - total flux cleaned = 0.000532397 Jy ! Component: 550 - total flux cleaned = 0.000578063 Jy ! Component: 600 - total flux cleaned = 0.000594911 Jy ! Component: 650 - total flux cleaned = 0.000567595 Jy ! Component: 700 - total flux cleaned = 0.000540702 Jy ! Component: 750 - total flux cleaned = 0.000519669 Jy ! Component: 800 - total flux cleaned = 0.000478318 Jy ! Component: 850 - total flux cleaned = 0.000432342 Jy ! Component: 900 - total flux cleaned = 0.000396922 Jy ! Component: 950 - total flux cleaned = 0.000346735 Jy ! Component: 1000 - total flux cleaned = 0.000311801 Jy ! Component: 1050 - total flux cleaned = 0.000267014 Jy ! Component: 1100 - total flux cleaned = 0.000207446 Jy ! Component: 1150 - total flux cleaned = 0.000152942 Jy ! Component: 1200 - total flux cleaned = 0.000108269 Jy ! Component: 1250 - total flux cleaned = 7.33664e-05 Jy ! Component: 1300 - total flux cleaned = 2.82055e-05 Jy ! Component: 1350 - total flux cleaned = -7.17063e-06 Jy ! Component: 1400 - total flux cleaned = -4.78708e-05 Jy ! Component: 1450 - total flux cleaned = -9.91714e-05 Jy ! Component: 1500 - total flux cleaned = -0.000135416 Jy ! Component: 1550 - total flux cleaned = -0.000177211 Jy ! Component: 1600 - total flux cleaned = -0.000224756 Jy ! Component: 1650 - total flux cleaned = -0.000267426 Jy ! Component: 1700 - total flux cleaned = -0.000321382 Jy ! Component: 1750 - total flux cleaned = -0.000375988 Jy ! Component: 1800 - total flux cleaned = -0.000425694 Jy ! Component: 1850 - total flux cleaned = -0.000476016 Jy ! Component: 1900 - total flux cleaned = -0.000521322 Jy ! Component: 1950 - total flux cleaned = -0.000572933 Jy ! Component: 2000 - total flux cleaned = -0.000631087 Jy ! Component: 2050 - total flux cleaned = -0.000678281 Jy ! Component: 2100 - total flux cleaned = -0.000732054 Jy ! Component: 2150 - total flux cleaned = -0.000792613 Jy ! Component: 2200 - total flux cleaned = -0.000847891 Jy ! Component: 2250 - total flux cleaned = -0.000910108 Jy ! Component: 2300 - total flux cleaned = -0.000973292 Jy ! Component: 2350 - total flux cleaned = -0.00103102 Jy ! Component: 2400 - total flux cleaned = -0.00108318 Jy ! Component: 2450 - total flux cleaned = -0.00114275 Jy ! Component: 2500 - total flux cleaned = -0.0012033 Jy ! Component: 2550 - total flux cleaned = -0.00127172 Jy ! Component: 2600 - total flux cleaned = -0.00134141 Jy ! Component: 2650 - total flux cleaned = -0.00141219 Jy ! Component: 2700 - total flux cleaned = -0.00149151 Jy ! Component: 2750 - total flux cleaned = -0.00157229 Jy ! Component: 2800 - total flux cleaned = -0.00166206 Jy ! Component: 2850 - total flux cleaned = -0.00173059 Jy ! Component: 2900 - total flux cleaned = -0.00182362 Jy ! Component: 2950 - total flux cleaned = -0.00191843 Jy ! Component: 3000 - total flux cleaned = -0.002015 Jy ! Component: 3050 - total flux cleaned = -0.00210524 Jy ! Component: 3100 - total flux cleaned = -0.00220562 Jy ! Component: 3150 - total flux cleaned = -0.00229938 Jy ! Component: 3200 - total flux cleaned = -0.00239498 Jy ! Component: 3250 - total flux cleaned = -0.00248366 Jy ! Component: 3300 - total flux cleaned = -0.00260138 Jy ! Component: 3350 - total flux cleaned = -0.00268457 Jy ! Component: 3400 - total flux cleaned = -0.00278832 Jy ! Component: 3450 - total flux cleaned = -0.00289424 Jy ! Component: 3500 - total flux cleaned = -0.00298279 Jy ! Component: 3550 - total flux cleaned = -0.00310331 Jy ! Component: 3600 - total flux cleaned = -0.0031958 Jy ! Component: 3650 - total flux cleaned = -0.00329017 Jy ! Component: 3700 - total flux cleaned = -0.00339713 Jy ! Component: 3750 - total flux cleaned = -0.00350642 Jy ! Component: 3800 - total flux cleaned = -0.00361825 Jy ! Component: 3850 - total flux cleaned = -0.00372097 Jy ! Component: 3900 - total flux cleaned = -0.00382587 Jy ! Component: 3950 - total flux cleaned = -0.00395687 Jy ! Component: 4000 - total flux cleaned = -0.00405413 Jy ! Component: 4050 - total flux cleaned = -0.00417819 Jy ! Total flux subtracted in 4096 components = -0.00429234 Jy ! Clean residual min=-0.000748 max=0.000661 Jy/beam ! Clean residual mean=-0.000008 rms=0.000315 Jy/beam ! Combined flux in latest and established models = 0.00437263 Jy keep ! Adding 371 model components to the UV plane model. ! The established model now contains 430 components and 0.00437263 Jy ![Exited script file: /opt64/bin/pima_mupet_02.dfm] wmap /vlbi/vcs9/uvm//J2045+3233_C_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.902 x 5.485 at -1.951 degrees (North through East) ! Clean map min=-0.00079981 max=0.0084682 Jy/beam ! Writing clean map to FITS file: /vlbi/vcs9/uvm//J2045+3233_C_a_map.fits wmodel /vlbi/vcs9/uvm//J2045+3233_C_a_map.mod ! Writing 430 model components to file: /vlbi/vcs9/uvm//J2045+3233_C_a_map.mod wobs /vlbi/vcs9/uvm//J2045+3233_C_a_uvs.fits ! Writing UV FITS file: /vlbi/vcs9/uvm//J2045+3233_C_a_uvs.fits wwins /vlbi/vcs9/uvm//J2045+3233_C_a_map.win ! wwins: Wrote 3 windows to /vlbi/vcs9/uvm//J2045+3233_C_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.00846817 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000424201 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -15.0281 15.0281 30.0562 60.1123 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.008 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 19.962 quit ! Quitting program ! Log file /vlbi/vcs9/uvm//J2045+3233_C_a_dfm.log closed on Tue Dec 26 22:59:49 2017