! Started logfile: /vlbi/vcs9/uvm//J2042-0310_C_a_dfm.log on Tue Dec 26 22:59:26 2017 float field_size field_size = 1024 float field_cell field_cell = 0.3000 float taper_size taper_size = 40.0 float freq freq = 4.12800 obs /vlbi/vcs9/uvm//J2042-0310_C_a_uvm.fits ! Reading UV FITS file: /vlbi/vcs9/uvm//J2042-0310_C_a_uvm.fits ! AN table 1: 37 integrations on 36 of 36 possible baselines. ! AN table 2: 44 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.951241 visibilities/baseline/integration-bin. ! Found source: J2042-0310 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 4.128e+09 3.2e+07 1 3.2e+07 ! 02 2 4.16e+09 3.2e+07 1 3.2e+07 ! 03 3 4.192e+09 3.2e+07 1 3.2e+07 ! 04 4 4.224e+09 3.2e+07 1 3.2e+07 ! 05 5 4.416e+09 3.2e+07 1 3.2e+07 ! 06 6 4.512e+09 3.2e+07 1 3.2e+07 ! 07 7 4.544e+09 3.2e+07 1 3.2e+07 ! 08 8 4.576e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 94 lines of history. ! ! Reading 17168 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 8 channels. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.3 print "taper_size =", taper_size ! taper_size = 40 ![@/opt64/bin/pima_mupet_02.dfm J2042-0310_C] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 60 float amp_soltime2 amp_soltime2 = 5 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.1 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_02.dvm version of 2017.12.26 === " ! === Difmap script: pima_mupet_02.dvm version of 2017.12.26 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.0284814 Jy startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 21 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 21 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 21 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 21 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 21 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 21 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 21 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 21 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.000216Jy sigma=29.475902 ! Fit after self-cal, rms=0.989965Jy sigma=29.209127 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. peakwin win_mult ! Inverting map and beam ! Estimated beam: bmin=1.466 mas, bmaj=7.058 mas, bpa=-16.93 degrees ! Estimated noise=0.279715 mJy/beam. ! Added new window around map position (0, 0). flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00846032 Jy ! Component: 100 - total flux cleaned = 0.00969496 Jy ! Total flux subtracted in 100 components = 0.00969496 Jy ! Clean residual min=-0.001140 max=0.000987 Jy/beam ! Clean residual mean=0.000000 rms=0.000249 Jy/beam ! Combined flux in latest and established models = 0.00969496 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.00969496 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.026515Jy sigma=0.682710 ! Fit after self-cal, rms=0.026495Jy sigma=0.681984 ! Inverting map print "============== Finished uniform weighting CLEAN ==============" ! ============== Finished uniform weighting CLEAN ============== ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.86 mas, bmaj=7.817 mas, bpa=-15.93 degrees ! Estimated noise=0.183168 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000110229 Jy ! Component: 100 - total flux cleaned = 0.000182995 Jy ! Component: 150 - total flux cleaned = 0.000221404 Jy ! Component: 200 - total flux cleaned = 0.000245066 Jy ! Total flux subtracted in 200 components = 0.000245066 Jy ! Clean residual min=-0.000898 max=0.000725 Jy/beam ! Clean residual mean=-0.000001 rms=0.000210 Jy/beam ! Combined flux in latest and established models = 0.00994002 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 29 components and 0.00994002 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.026481Jy sigma=0.681751 ! Fit after self-cal, rms=0.026481Jy sigma=0.681740 ! Inverting map print "============== Finished natural weighting CLEAN ==============" ! ============== Finished natural weighting CLEAN ============== ! gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.3589 ! Telescope amplitude corrections in sub-array 1: ! BR 0.81 FD 0.81 HN 0.62 KP 0.90 ! LA 0.63 MK 0.81 NL 0.62 OV 0.69 ! PT 0.74 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 1.3539 ! Telescope amplitude corrections in sub-array 2: ! FD 0.55 KP 0.74 LA 0.75 MK 0.87 ! NL 0.76 OV 0.80 PT 0.69 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.1657 ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.72 HN 0.75 KP 1.05 ! LA 0.65 MK 0.87 NL 0.87 OV 1.04 ! PT 0.89 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 1.16219 ! Telescope amplitude corrections in sub-array 2: ! FD 0.59 KP 1.07 LA 0.84 MK 0.77 ! NL 0.92 OV 0.80 PT 1.03 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.893793 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.91 HN 1.10 KP 1.39 ! LA 1.14 MK 1.11 NL 0.76 OV 1.28 ! PT 1.40 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 0.966837 ! Telescope amplitude corrections in sub-array 2: ! FD 0.94 KP 1.59 LA 1.11 MK 0.98 ! NL 0.71 OV 0.81 PT 1.10 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.932379 ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 0.98 HN 1.09 KP 1.18 ! LA 0.92 MK 1.14 NL 1.26 OV 0.87 ! PT 1.32 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 1.03145 ! Telescope amplitude corrections in sub-array 2: ! FD 0.76 KP 1.08 LA 0.72 MK 1.09 ! NL 0.93 OV 1.18 PT 1.04 ! ! ! Correcting IF 5. ! Amplitude normalization factor in sub-array 1: 0.909272 ! Telescope amplitude corrections in sub-array 1: ! BR 0.70 FD 1.07 HN 1.15 KP 1.05 ! LA 0.87 MK 1.14 NL 0.99 OV 1.90 ! PT 1.04 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 0.948344 ! Telescope amplitude corrections in sub-array 2: ! FD 0.88 KP 1.10 LA 0.84 MK 0.92 ! NL 1.01 OV 1.15 PT 1.48 ! ! ! Correcting IF 6. ! Amplitude normalization factor in sub-array 1: 0.821059 ! Telescope amplitude corrections in sub-array 1: ! BR 1.54 FD 1.64 HN 1.32 KP 1.49 ! LA 0.85 MK 1.01 NL 0.96 OV 1.01 ! PT 1.14 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 0.871172 ! Telescope amplitude corrections in sub-array 2: ! FD 1.27 KP 1.00 LA 0.79 MK 1.26 ! NL 1.14 OV 1.19 PT 1.39 ! ! ! Correcting IF 7. ! Amplitude normalization factor in sub-array 1: 0.861669 ! Telescope amplitude corrections in sub-array 1: ! BR 0.84 FD 1.51 HN 1.13 KP 1.15 ! LA 0.87 MK 1.06 NL 1.30 OV 1.26 ! PT 1.33 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 0.836667 ! Telescope amplitude corrections in sub-array 2: ! FD 1.40 KP 1.11 LA 0.73 MK 1.13 ! NL 1.22 OV 1.17 PT 1.61 ! ! ! Correcting IF 8. ! Amplitude normalization factor in sub-array 1: 0.867611 ! Telescope amplitude corrections in sub-array 1: ! BR 1.20 FD 1.19 HN 1.20 KP 1.32 ! LA 0.72 MK 1.17 NL 1.10 OV 0.91 ! PT 1.55 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 1.02414 ! Telescope amplitude corrections in sub-array 2: ! FD 1.04 KP 0.88 LA 0.98 MK 1.12 ! NL 0.89 OV 0.86 PT 1.06 ! ! ! Fit before self-cal, rms=0.026481Jy sigma=0.681740 ! Fit after self-cal, rms=0.026892Jy sigma=0.679981 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.026892Jy sigma=0.679981 ! Fit after self-cal, rms=0.026896Jy sigma=0.679944 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.906 mas, bmaj=7.631 mas, bpa=-15.85 degrees ! Estimated noise=0.159681 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000928586 Jy ! Component: 100 - total flux cleaned = -0.000966507 Jy ! Component: 150 - total flux cleaned = -0.000948518 Jy ! Component: 200 - total flux cleaned = -0.000934718 Jy ! Total flux subtracted in 200 components = -0.000934718 Jy ! Clean residual min=-0.000633 max=0.000552 Jy/beam ! Clean residual mean=-0.000001 rms=0.000151 Jy/beam ! Combined flux in latest and established models = 0.00900531 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 42 components and 0.00900531 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.026919Jy sigma=0.678883 ! Fit after self-cal, rms=0.026919Jy sigma=0.678877 ! Inverting map print "============== Finished amplitude gscale SELF-CAL ==============" ! ============== Finished amplitude gscale SELF-CAL ============== ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.026919Jy sigma=0.678877 ! Fit after self-cal, rms=0.026887Jy sigma=0.677192 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000114433 Jy ! Component: 100 - total flux cleaned = 0.000155771 Jy ! Component: 150 - total flux cleaned = 0.000177438 Jy ! Component: 200 - total flux cleaned = 0.000188952 Jy ! Total flux subtracted in 200 components = 0.000188952 Jy ! Clean residual min=-0.000608 max=0.000540 Jy/beam ! Clean residual mean=-0.000002 rms=0.000146 Jy/beam ! Combined flux in latest and established models = 0.00919426 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 49 components and 0.00919426 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.026884Jy sigma=0.677134 ! Fit after self-cal, rms=0.026882Jy sigma=0.676979 ! Inverting map print "=== Finished natural weighting clean with shorter phase_soltime " ! === Finished natural weighting clean with shorter phase_soltime ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.906 x 7.631 at -15.85 degrees (North through East) ! Clean map min=-0.00057408 max=0.0084065 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "============== Finished amplitude self-cal ==============" end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.479 mas, bmaj=6.858 mas, bpa=-16.82 degrees ! Estimated noise=0.275253 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00778549 Jy ! Component: 100 - total flux cleaned = 0.00902461 Jy ! Component: 150 - total flux cleaned = 0.00959113 Jy ! Component: 200 - total flux cleaned = 0.00969311 Jy ! Total flux subtracted in 200 components = 0.00969311 Jy ! Clean residual min=-0.000830 max=0.000858 Jy/beam ! Clean residual mean=-0.000000 rms=0.000203 Jy/beam ! Combined flux in latest and established models = 0.00969311 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.00969311 Jy ! Inverting map and beam ! Estimated beam: bmin=1.906 mas, bmaj=7.631 mas, bpa=-15.85 degrees ! Estimated noise=0.159681 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000365417 Jy ! Component: 100 - total flux cleaned = -0.000423762 Jy ! Component: 150 - total flux cleaned = -0.000446064 Jy ! Component: 200 - total flux cleaned = -0.000457792 Jy ! Total flux subtracted in 200 components = -0.000457792 Jy ! Clean residual min=-0.000609 max=0.000552 Jy/beam ! Clean residual mean=-0.000002 rms=0.000148 Jy/beam ! Combined flux in latest and established models = 0.00923532 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 46 components and 0.00923532 Jy ! Inverting map clean ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 4.47284e-06 Jy ! Component: 100 - total flux cleaned = 8.68955e-06 Jy ! Component: 150 - total flux cleaned = 1.62617e-05 Jy ! Component: 200 - total flux cleaned = 1.9723e-05 Jy ! Total flux subtracted in 200 components = 1.9723e-05 Jy ! Clean residual min=-0.000601 max=0.000544 Jy/beam ! Clean residual mean=-0.000002 rms=0.000147 Jy/beam ! Combined flux in latest and established models = 0.00925504 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 57 components and 0.00925504 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.026879Jy sigma=0.676983 ! Fit after self-cal, rms=0.026879Jy sigma=0.676961 wmodel J2042-0310_C_map.mod ! Writing 57 model components to file: J2042-0310_C_map.mod wobs J2042-0310_C_uvs.fits ! Writing UV FITS file: J2042-0310_C_uvs.fits wwins J2042-0310_C_map.win ! wwins: Wrote 1 windows to J2042-0310_C_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000210748 Jy ! Component: 100 - total flux cleaned = -0.000221338 Jy ! Component: 150 - total flux cleaned = -0.000203814 Jy ! Component: 200 - total flux cleaned = -0.000171086 Jy ! Component: 250 - total flux cleaned = -0.000131731 Jy ! Component: 300 - total flux cleaned = -7.89623e-05 Jy ! Component: 350 - total flux cleaned = -1.3773e-05 Jy ! Component: 400 - total flux cleaned = 4.91532e-05 Jy ! Component: 450 - total flux cleaned = 8.96578e-05 Jy ! Component: 500 - total flux cleaned = 0.00013549 Jy ! Component: 550 - total flux cleaned = 0.000160815 Jy ! Component: 600 - total flux cleaned = 0.000210557 Jy ! Component: 650 - total flux cleaned = 0.000265395 Jy ! Component: 700 - total flux cleaned = 0.00031911 Jy ! Component: 750 - total flux cleaned = 0.000377375 Jy ! Component: 800 - total flux cleaned = 0.000428792 Jy ! Component: 850 - total flux cleaned = 0.00047905 Jy ! Component: 900 - total flux cleaned = 0.000522705 Jy ! Component: 950 - total flux cleaned = 0.000554884 Jy ! Component: 1000 - total flux cleaned = 0.000602361 Jy ! Component: 1050 - total flux cleaned = 0.000643839 Jy ! Component: 1100 - total flux cleaned = 0.000674422 Jy ! Component: 1150 - total flux cleaned = 0.000724602 Jy ! Component: 1200 - total flux cleaned = 0.000779002 Jy ! Component: 1250 - total flux cleaned = 0.000827668 Jy ! Component: 1300 - total flux cleaned = 0.000880382 Jy ! Component: 1350 - total flux cleaned = 0.000918162 Jy ! Component: 1400 - total flux cleaned = 0.000964816 Jy ! Component: 1450 - total flux cleaned = 0.00101077 Jy ! Component: 1500 - total flux cleaned = 0.00106514 Jy ! Component: 1550 - total flux cleaned = 0.00110537 Jy ! Component: 1600 - total flux cleaned = 0.00114071 Jy ! Component: 1650 - total flux cleaned = 0.00118427 Jy ! Component: 1700 - total flux cleaned = 0.00120149 Jy ! Component: 1750 - total flux cleaned = 0.00123556 Jy ! Component: 1800 - total flux cleaned = 0.00127342 Jy ! Component: 1850 - total flux cleaned = 0.001315 Jy ! Component: 1900 - total flux cleaned = 0.00133973 Jy ! Component: 1950 - total flux cleaned = 0.0013764 Jy ! Component: 2000 - total flux cleaned = 0.00142868 Jy ! Component: 2050 - total flux cleaned = 0.00146846 Jy ! Component: 2100 - total flux cleaned = 0.00150781 Jy ! Component: 2150 - total flux cleaned = 0.00154684 Jy ! Component: 2200 - total flux cleaned = 0.00159316 Jy ! Component: 2250 - total flux cleaned = 0.00163523 Jy ! Component: 2300 - total flux cleaned = 0.00167308 Jy ! Component: 2350 - total flux cleaned = 0.00170685 Jy ! Component: 2400 - total flux cleaned = 0.00172919 Jy ! Component: 2450 - total flux cleaned = 0.00177344 Jy ! Component: 2500 - total flux cleaned = 0.00180265 Jy ! Component: 2550 - total flux cleaned = 0.0018244 Jy ! Component: 2600 - total flux cleaned = 0.0018639 Jy ! Component: 2650 - total flux cleaned = 0.00189238 Jy ! Component: 2700 - total flux cleaned = 0.00192067 Jy ! Component: 2750 - total flux cleaned = 0.00195224 Jy ! Component: 2800 - total flux cleaned = 0.00198009 Jy ! Component: 2850 - total flux cleaned = 0.0020147 Jy ! Component: 2900 - total flux cleaned = 0.00203878 Jy ! Component: 2950 - total flux cleaned = 0.00206954 Jy ! Component: 3000 - total flux cleaned = 0.00208991 Jy ! Component: 3050 - total flux cleaned = 0.0021169 Jy ! Component: 3100 - total flux cleaned = 0.00215043 Jy ! Component: 3150 - total flux cleaned = 0.00217707 Jy ! Component: 3200 - total flux cleaned = 0.00221018 Jy ! Component: 3250 - total flux cleaned = 0.00223652 Jy ! Component: 3300 - total flux cleaned = 0.00225946 Jy ! Component: 3350 - total flux cleaned = 0.00228878 Jy ! Component: 3400 - total flux cleaned = 0.00230819 Jy ! Component: 3450 - total flux cleaned = 0.00233396 Jy ! Component: 3500 - total flux cleaned = 0.00236277 Jy ! Component: 3550 - total flux cleaned = 0.00238184 Jy ! Component: 3600 - total flux cleaned = 0.00240715 Jy ! Component: 3650 - total flux cleaned = 0.00242603 Jy ! Component: 3700 - total flux cleaned = 0.00244795 Jy ! Component: 3750 - total flux cleaned = 0.00246664 Jy ! Component: 3800 - total flux cleaned = 0.00247594 Jy ! Component: 3850 - total flux cleaned = 0.00250063 Jy ! Component: 3900 - total flux cleaned = 0.00251906 Jy ! Component: 3950 - total flux cleaned = 0.00254352 Jy ! Component: 4000 - total flux cleaned = 0.00256481 Jy ! Component: 4050 - total flux cleaned = 0.00257693 Jy ! Total flux subtracted in 4096 components = 0.00259204 Jy ! Clean residual min=-0.000159 max=0.000208 Jy/beam ! Clean residual mean=0.000000 rms=0.000056 Jy/beam ! Combined flux in latest and established models = 0.0118471 Jy keep ! Adding 292 model components to the UV plane model. ! The established model now contains 349 components and 0.0118471 Jy ![Exited script file: /opt64/bin/pima_mupet_02.dfm] wmap /vlbi/vcs9/uvm//J2042-0310_C_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.906 x 7.631 at -15.85 degrees (North through East) ! Clean map min=-0.00041725 max=0.0086083 Jy/beam ! Writing clean map to FITS file: /vlbi/vcs9/uvm//J2042-0310_C_a_map.fits wmodel /vlbi/vcs9/uvm//J2042-0310_C_a_map.mod ! Writing 349 model components to file: /vlbi/vcs9/uvm//J2042-0310_C_a_map.mod wobs /vlbi/vcs9/uvm//J2042-0310_C_a_uvs.fits ! Writing UV FITS file: /vlbi/vcs9/uvm//J2042-0310_C_a_uvs.fits wwins /vlbi/vcs9/uvm//J2042-0310_C_a_map.win ! wwins: Wrote 2 windows to /vlbi/vcs9/uvm//J2042-0310_C_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.00860832 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 5.55053e-05 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.93436 1.93436 3.86872 7.73745 15.4749 30.9498 61.8996 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0001 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.008 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 155.089 quit ! Quitting program ! Log file /vlbi/vcs9/uvm//J2042-0310_C_a_dfm.log closed on Tue Dec 26 22:59:29 2017