! Started logfile: /vlbi/vcs9/uvm//J2022-2058_X_a_dfm.log on Tue Dec 26 22:58:06 2017 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 7.39200 obs /vlbi/vcs9/uvm//J2022-2058_X_a_uvm.fits ! Reading UV FITS file: /vlbi/vcs9/uvm//J2022-2058_X_a_uvm.fits ! AN table 1: 29 integrations on 45 of 45 possible baselines. ! AN table 2: 156 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.967389 visibilities/baseline/integration-bin. ! Found source: J2022-2058 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 7.392e+09 3.2e+07 1 3.2e+07 ! 02 2 7.424e+09 3.2e+07 1 3.2e+07 ! 03 3 7.456e+09 3.2e+07 1 3.2e+07 ! 04 4 7.552e+09 3.2e+07 1 3.2e+07 ! 05 5 7.744e+09 3.2e+07 1 3.2e+07 ! 06 6 7.776e+09 3.2e+07 1 3.2e+07 ! 07 7 7.808e+09 3.2e+07 1 3.2e+07 ! 08 8 7.84e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 94 lines of history. ! ! Reading 43904 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 8 channels. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_02.dfm J2022-2058_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 60 float amp_soltime2 amp_soltime2 = 5 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.1 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_02.dvm version of 2017.12.26 === " ! === Difmap script: pima_mupet_02.dvm version of 2017.12.26 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.0843602 Jy startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 38 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 38 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 38 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 38 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 38 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 38 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 38 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 38 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.003137Jy sigma=13.011270 ! Fit after self-cal, rms=0.963609Jy sigma=12.527882 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. peakwin win_mult ! Inverting map and beam ! Estimated beam: bmin=0.7092 mas, bmaj=2.015 mas, bpa=1.085 degrees ! Estimated noise=0.637094 mJy/beam. ! Added new window around map position (0, 0). flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0291885 Jy ! Component: 100 - total flux cleaned = 0.0357224 Jy ! Total flux subtracted in 100 components = 0.0357224 Jy ! Clean residual min=-0.002633 max=0.002821 Jy/beam ! Clean residual mean=0.000001 rms=0.000596 Jy/beam ! Combined flux in latest and established models = 0.0357224 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0357224 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.074640Jy sigma=0.675474 ! Fit after self-cal, rms=0.074638Jy sigma=0.675384 ! Inverting map print "============== Finished uniform weighting CLEAN ==============" ! ============== Finished uniform weighting CLEAN ============== ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9824 mas, bmaj=2.856 mas, bpa=-6.901 degrees ! Estimated noise=0.259845 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0050918 Jy ! Component: 100 - total flux cleaned = 0.00677207 Jy ! Component: 150 - total flux cleaned = 0.00697953 Jy ! Component: 200 - total flux cleaned = 0.00693081 Jy ! Total flux subtracted in 200 components = 0.00693081 Jy ! Clean residual min=-0.001160 max=0.001764 Jy/beam ! Clean residual mean=0.000000 rms=0.000384 Jy/beam ! Combined flux in latest and established models = 0.0426532 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 35 model components to the UV plane model. ! The established model now contains 40 components and 0.0426532 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.074340Jy sigma=0.671311 ! Fit after self-cal, rms=0.074340Jy sigma=0.671303 ! Inverting map print "============== Finished natural weighting CLEAN ==============" ! ============== Finished natural weighting CLEAN ============== ! gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.963703 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.87 HN 1.23 KP 1.02 ! LA 1.09 MK 0.95 NL 1.19 OV 1.06 ! PT 1.00 SC 0.99 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 0.989388 ! Telescope amplitude corrections in sub-array 2: ! BR 0.83 FD 0.96 HN 0.94 KP 1.20 ! LA 1.07 MK 1.01 NL 1.00 OV 1.07 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.9662 ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.95 HN 1.31 KP 0.97 ! LA 0.95 MK 1.05 NL 1.04 OV 1.03 ! PT 0.98 SC 1.05 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 1.01833 ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 0.99 HN 0.85 KP 0.97 ! LA 1.05 MK 1.05 NL 0.92 OV 1.06 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.970021 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.93 HN 1.28 KP 0.99 ! LA 1.00 MK 0.93 NL 1.09 OV 1.02 ! PT 0.99 SC 1.06 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 0.986791 ! Telescope amplitude corrections in sub-array 2: ! BR 1.13 FD 1.05 HN 0.81 KP 0.93 ! LA 1.17 MK 0.89 NL 1.01 OV 1.12 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.972612 ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.90 HN 1.30 KP 0.98 ! LA 0.96 MK 0.91 NL 1.02 OV 1.17 ! PT 0.94 SC 0.99 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 1.01731 ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.99 HN 0.84 KP 0.96 ! LA 1.11 MK 0.96 NL 0.99 OV 1.01 ! ! ! Correcting IF 5. ! Amplitude normalization factor in sub-array 1: 0.890946 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.90 HN 1.65 KP 0.92 ! LA 1.01 MK 1.17 NL 1.09 OV 1.06 ! PT 0.98 SC 1.47 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 1.02341 ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 FD 0.97 HN 0.95 KP 0.95 ! LA 1.06 MK 1.04 NL 0.93 OV 0.98 ! ! ! Correcting IF 6. ! Amplitude normalization factor in sub-array 1: 0.94881 ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.97 HN 1.33 KP 0.94 ! LA 1.02 MK 1.25 NL 1.04 OV 0.99 ! PT 1.00 SC 1.07 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 1.06213 ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 1.01 HN 0.80 KP 0.99 ! LA 1.05 MK 0.91 NL 0.87 OV 0.94 ! ! ! Correcting IF 7. ! Amplitude normalization factor in sub-array 1: 0.919157 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.89 HN 1.16 KP 0.98 ! LA 1.05 MK 1.16 NL 1.42 OV 1.08 ! PT 1.08 SC 1.11 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 1.08313 ! Telescope amplitude corrections in sub-array 2: ! BR 0.89 FD 0.87 HN 0.72 KP 1.07 ! LA 1.08 MK 0.88 NL 0.91 OV 0.97 ! ! ! Correcting IF 8. ! Amplitude normalization factor in sub-array 1: 0.942529 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.98 HN 1.26 KP 0.94 ! LA 1.02 MK 1.32 NL 1.17 OV 0.95 ! PT 0.99 SC 1.03 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 1.03176 ! Telescope amplitude corrections in sub-array 2: ! BR 0.89 FD 0.86 HN 0.84 KP 1.00 ! LA 1.22 MK 1.03 NL 1.05 OV 0.87 ! ! ! Fit before self-cal, rms=0.074340Jy sigma=0.671303 ! Fit after self-cal, rms=0.071419Jy sigma=0.670489 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.071419Jy sigma=0.670489 ! Fit after self-cal, rms=0.071420Jy sigma=0.670482 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9971 mas, bmaj=2.856 mas, bpa=-6.51 degrees ! Estimated noise=0.250126 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.6, 18.8). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000979792 Jy ! Component: 100 - total flux cleaned = 0.00128265 Jy ! Component: 150 - total flux cleaned = 0.00140946 Jy ! Component: 200 - total flux cleaned = 0.00141215 Jy ! Total flux subtracted in 200 components = 0.00141215 Jy ! Clean residual min=-0.000800 max=0.001003 Jy/beam ! Clean residual mean=-0.000002 rms=0.000242 Jy/beam ! Combined flux in latest and established models = 0.0440653 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 60 components and 0.0440653 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.071407Jy sigma=0.669692 ! Fit after self-cal, rms=0.071405Jy sigma=0.669681 ! Inverting map print "============== Finished amplitude gscale SELF-CAL ==============" ! ============== Finished amplitude gscale SELF-CAL ============== ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.071405Jy sigma=0.669681 ! Fit after self-cal, rms=0.071376Jy sigma=0.669217 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000156452 Jy ! Component: 100 - total flux cleaned = 0.000212428 Jy ! Component: 150 - total flux cleaned = 0.000222515 Jy ! Component: 200 - total flux cleaned = 0.000232266 Jy ! Total flux subtracted in 200 components = 0.000232266 Jy ! Clean residual min=-0.000797 max=0.001000 Jy/beam ! Clean residual mean=-0.000002 rms=0.000239 Jy/beam ! Combined flux in latest and established models = 0.0442976 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 74 components and 0.0442976 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.071372Jy sigma=0.669178 ! Fit after self-cal, rms=0.071369Jy sigma=0.669117 ! Inverting map print "=== Finished natural weighting clean with shorter phase_soltime " ! === Finished natural weighting clean with shorter phase_soltime ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9971 x 2.856 at -6.51 degrees (North through East) ! Clean map min=-0.00074908 max=0.034736 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "============== Finished amplitude self-cal ==============" end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7153 mas, bmaj=2.02 mas, bpa=1.044 degrees ! Estimated noise=0.621361 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0284244 Jy ! Component: 100 - total flux cleaned = 0.0346666 Jy ! Component: 150 - total flux cleaned = 0.0380562 Jy ! Component: 200 - total flux cleaned = 0.0398798 Jy ! Total flux subtracted in 200 components = 0.0398798 Jy ! Clean residual min=-0.002114 max=0.002177 Jy/beam ! Clean residual mean=-0.000001 rms=0.000487 Jy/beam ! Combined flux in latest and established models = 0.0398798 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 0.0398798 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9971 mas, bmaj=2.856 mas, bpa=-6.51 degrees ! Estimated noise=0.250126 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00242165 Jy ! Component: 100 - total flux cleaned = 0.00349686 Jy ! Component: 150 - total flux cleaned = 0.00401722 Jy ! Component: 200 - total flux cleaned = 0.00432742 Jy ! Total flux subtracted in 200 components = 0.00432742 Jy ! Clean residual min=-0.000854 max=0.000997 Jy/beam ! Clean residual mean=-0.000002 rms=0.000245 Jy/beam ! Combined flux in latest and established models = 0.0442072 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 49 components and 0.0442072 Jy ! Inverting map clean ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000185453 Jy ! Component: 100 - total flux cleaned = 0.000251823 Jy ! Component: 150 - total flux cleaned = 0.000264371 Jy ! Component: 200 - total flux cleaned = 0.000264161 Jy ! Total flux subtracted in 200 components = 0.000264161 Jy ! Clean residual min=-0.000821 max=0.001002 Jy/beam ! Clean residual mean=-0.000002 rms=0.000239 Jy/beam ! Combined flux in latest and established models = 0.0444714 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 59 components and 0.0444714 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.071376Jy sigma=0.669134 ! Fit after self-cal, rms=0.071376Jy sigma=0.669121 wmodel J2022-2058_X_map.mod ! Writing 59 model components to file: J2022-2058_X_map.mod wobs J2022-2058_X_uvs.fits ! Writing UV FITS file: J2022-2058_X_uvs.fits wwins J2022-2058_X_map.win ! wwins: Wrote 2 windows to J2022-2058_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000448535 Jy ! Component: 100 - total flux cleaned = 0.000714551 Jy ! Component: 150 - total flux cleaned = 0.000886738 Jy ! Component: 200 - total flux cleaned = 0.000969123 Jy ! Component: 250 - total flux cleaned = 0.000995416 Jy ! Component: 300 - total flux cleaned = 0.00104624 Jy ! Component: 350 - total flux cleaned = 0.00114454 Jy ! Component: 400 - total flux cleaned = 0.00121621 Jy ! Component: 450 - total flux cleaned = 0.00126272 Jy ! Component: 500 - total flux cleaned = 0.00129694 Jy ! Component: 550 - total flux cleaned = 0.00131942 Jy ! Component: 600 - total flux cleaned = 0.00131947 Jy ! Component: 650 - total flux cleaned = 0.0013409 Jy ! Component: 700 - total flux cleaned = 0.00129923 Jy ! Component: 750 - total flux cleaned = 0.00130967 Jy ! Component: 800 - total flux cleaned = 0.00130959 Jy ! Component: 850 - total flux cleaned = 0.00127984 Jy ! Component: 900 - total flux cleaned = 0.00126995 Jy ! Component: 950 - total flux cleaned = 0.00126997 Jy ! Component: 1000 - total flux cleaned = 0.00125123 Jy ! Component: 1050 - total flux cleaned = 0.00127887 Jy ! Component: 1100 - total flux cleaned = 0.00123323 Jy ! Component: 1150 - total flux cleaned = 0.00123327 Jy ! Component: 1200 - total flux cleaned = 0.00123333 Jy ! Component: 1250 - total flux cleaned = 0.0011985 Jy ! Component: 1300 - total flux cleaned = 0.00119846 Jy ! Component: 1350 - total flux cleaned = 0.00119821 Jy ! Component: 1400 - total flux cleaned = 0.00117316 Jy ! Component: 1450 - total flux cleaned = 0.00115657 Jy ! Component: 1500 - total flux cleaned = 0.0011892 Jy ! Component: 1550 - total flux cleaned = 0.00121332 Jy ! Component: 1600 - total flux cleaned = 0.00122914 Jy ! Component: 1650 - total flux cleaned = 0.00122919 Jy ! Component: 1700 - total flux cleaned = 0.00122924 Jy ! Component: 1750 - total flux cleaned = 0.00127552 Jy ! Component: 1800 - total flux cleaned = 0.00128309 Jy ! Component: 1850 - total flux cleaned = 0.0012754 Jy ! Component: 1900 - total flux cleaned = 0.00129792 Jy ! Component: 1950 - total flux cleaned = 0.00129793 Jy ! Component: 2000 - total flux cleaned = 0.00129062 Jy ! Component: 2050 - total flux cleaned = 0.00129797 Jy ! Component: 2100 - total flux cleaned = 0.00130514 Jy ! Component: 2150 - total flux cleaned = 0.00131942 Jy ! Component: 2200 - total flux cleaned = 0.0013123 Jy ! Component: 2250 - total flux cleaned = 0.00130531 Jy ! Component: 2300 - total flux cleaned = 0.00129837 Jy ! Component: 2350 - total flux cleaned = 0.0013122 Jy ! Component: 2400 - total flux cleaned = 0.00129156 Jy ! Component: 2450 - total flux cleaned = 0.00126425 Jy ! Component: 2500 - total flux cleaned = 0.00125756 Jy ! Component: 2550 - total flux cleaned = 0.00125082 Jy ! Component: 2600 - total flux cleaned = 0.00125083 Jy ! Component: 2650 - total flux cleaned = 0.00122429 Jy ! Component: 2700 - total flux cleaned = 0.00121106 Jy ! Component: 2750 - total flux cleaned = 0.00120462 Jy ! Component: 2800 - total flux cleaned = 0.0011981 Jy ! Component: 2850 - total flux cleaned = 0.00119809 Jy ! Component: 2900 - total flux cleaned = 0.00119174 Jy ! Component: 2950 - total flux cleaned = 0.00119173 Jy ! Component: 3000 - total flux cleaned = 0.00118541 Jy ! Component: 3050 - total flux cleaned = 0.00118539 Jy ! Component: 3100 - total flux cleaned = 0.00119168 Jy ! Component: 3150 - total flux cleaned = 0.00121025 Jy ! Component: 3200 - total flux cleaned = 0.00122258 Jy ! Component: 3250 - total flux cleaned = 0.00122264 Jy ! Component: 3300 - total flux cleaned = 0.00121658 Jy ! Component: 3350 - total flux cleaned = 0.00122264 Jy ! Component: 3400 - total flux cleaned = 0.00123474 Jy ! Component: 3450 - total flux cleaned = 0.00122874 Jy ! Component: 3500 - total flux cleaned = 0.00122272 Jy ! Component: 3550 - total flux cleaned = 0.00122866 Jy ! Component: 3600 - total flux cleaned = 0.00123457 Jy ! Component: 3650 - total flux cleaned = 0.00125227 Jy ! Component: 3700 - total flux cleaned = 0.00124053 Jy ! Component: 3750 - total flux cleaned = 0.00124638 Jy ! Component: 3800 - total flux cleaned = 0.00123469 Jy ! Component: 3850 - total flux cleaned = 0.00126956 Jy ! Component: 3900 - total flux cleaned = 0.00125798 Jy ! Component: 3950 - total flux cleaned = 0.00128106 Jy ! Component: 4000 - total flux cleaned = 0.00129254 Jy ! Component: 4050 - total flux cleaned = 0.00127533 Jy ! Total flux subtracted in 4096 components = 0.00128106 Jy ! Clean residual min=-0.000333 max=0.000339 Jy/beam ! Clean residual mean=-0.000001 rms=0.000100 Jy/beam ! Combined flux in latest and established models = 0.0457524 Jy keep ! Adding 285 model components to the UV plane model. ! The established model now contains 344 components and 0.0457524 Jy ![Exited script file: /opt64/bin/pima_mupet_02.dfm] wmap /vlbi/vcs9/uvm//J2022-2058_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9971 x 2.856 at -6.51 degrees (North through East) ! Clean map min=-0.00065715 max=0.034247 Jy/beam ! Writing clean map to FITS file: /vlbi/vcs9/uvm//J2022-2058_X_a_map.fits wmodel /vlbi/vcs9/uvm//J2022-2058_X_a_map.mod ! Writing 344 model components to file: /vlbi/vcs9/uvm//J2022-2058_X_a_map.mod wobs /vlbi/vcs9/uvm//J2022-2058_X_a_uvs.fits ! Writing UV FITS file: /vlbi/vcs9/uvm//J2022-2058_X_a_uvs.fits wwins /vlbi/vcs9/uvm//J2022-2058_X_a_map.win ! wwins: Wrote 3 windows to /vlbi/vcs9/uvm//J2022-2058_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0342473 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 9.9765e-05 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.873922 0.873922 1.74784 3.49569 6.99138 13.9828 27.9655 55.931 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0002 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.034 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 343.279 quit ! Quitting program ! Log file /vlbi/vcs9/uvm//J2022-2058_X_a_dfm.log closed on Tue Dec 26 22:58:10 2017