! Started logfile: /vlbi/vcs9/uvm//J2022+6136_X_c_dfm.log on Tue Dec 26 22:57:56 2017
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    7.39200
obs     /vlbi/vcs9/uvm//J2022+6136_X_c_uvm.fits
! Reading UV FITS file: /vlbi/vcs9/uvm//J2022+6136_X_c_uvm.fits
! AN table 1: 31 integrations on 45 of 45 possible baselines.
! AN table 2: 18 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.741681 visibilities/baseline/integration-bin.
! Found source: J2022+6136
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 94 lines of history.
! 
! Reading 10520 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_02.dfm J2022+6136_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 60
float amp_soltime2
amp_soltime2 = 5
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.1
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_02.dvm version of 2017.12.26 === "
! === Difmap script: pima_mupet_02.dvm version of 2017.12.26 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 1.3985 Jy 
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 72 telescope corrections were flagged in sub-array 1.
!  A total of 4 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 72 telescope corrections were flagged in sub-array 1.
!  A total of 4 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 72 telescope corrections were flagged in sub-array 1.
!  A total of 4 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 72 telescope corrections were flagged in sub-array 1.
!  A total of 4 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 5.
!  A total of 72 telescope corrections were flagged in sub-array 1.
!  A total of 4 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 6.
!  A total of 72 telescope corrections were flagged in sub-array 1.
!  A total of 4 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 7.
!  A total of 72 telescope corrections were flagged in sub-array 1.
!  A total of 4 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 8.
!  A total of 72 telescope corrections were flagged in sub-array 1.
!  A total of 4 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.750951Jy  sigma=38.090597
! Fit after  self-cal, rms=0.668790Jy  sigma=14.316995
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
peakwin win_mult
! Inverting map and beam 
! Estimated beam: bmin=0.793 mas, bmaj=2.163 mas, bpa=-50.4 degrees
! Estimated noise=0.592421 mJy/beam.
! Added new window around map position (0, 0).
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 1.0099 Jy
! Component: 100  -  total flux cleaned = 1.30103 Jy
! Total flux subtracted in 100 components = 1.30103 Jy
! Clean residual min=-0.101676 max=0.333863 Jy/beam
! Clean residual mean=-0.000022 rms=0.026822 Jy/beam
! Combined flux in latest and established models = 1.30103 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 1.30103 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.532514Jy  sigma=11.299027
! Fit after  self-cal, rms=0.531507Jy  sigma=11.259978
! Inverting map 
! Added new window around map position (4, 5.8).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.3235 Jy
! Component: 100  -  total flux cleaned = 0.471972 Jy
! Total flux subtracted in 100 components = 0.471972 Jy
! Clean residual min=-0.040473 max=0.110246 Jy/beam
! Clean residual mean=-0.000009 rms=0.012473 Jy/beam
! Combined flux in latest and established models = 1.773 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 15 model components to the UV plane model.
! The established model now contains 24 components and 1.773 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.291640Jy  sigma=6.153515
! Fit after  self-cal, rms=0.287018Jy  sigma=6.060500
! Inverting map 
! Added new window around map position (1, 2).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.132855 Jy
! Component: 100  -  total flux cleaned = 0.220524 Jy
! Total flux subtracted in 100 components = 0.220524 Jy
! Clean residual min=-0.027380 max=0.037149 Jy/beam
! Clean residual mean=0.000007 rms=0.007985 Jy/beam
! Combined flux in latest and established models = 1.99352 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 14 model components to the UV plane model.
! The established model now contains 36 components and 1.99352 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.196223Jy  sigma=4.097235
! Fit after  self-cal, rms=0.193915Jy  sigma=4.036991
! Inverting map 
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0716906 Jy
! Component: 100  -  total flux cleaned = 0.124427 Jy
! Total flux subtracted in 100 components = 0.124427 Jy
! Clean residual min=-0.020126 max=0.026112 Jy/beam
! Clean residual mean=0.000017 rms=0.005724 Jy/beam
! Combined flux in latest and established models = 2.11795 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 25 model components to the UV plane model.
! The established model now contains 50 components and 2.11795 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.151603Jy  sigma=3.093671
! Fit after  self-cal, rms=0.151136Jy  sigma=3.076816
! Inverting map 
print "============== Finished uniform weighting CLEAN =============="
! ============== Finished uniform weighting CLEAN ============== 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.012 mas, bmaj=2.471 mas, bpa=-50.83 degrees
! Estimated noise=0.319915 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0780253 Jy
! Component: 100  -  total flux cleaned = 0.128246 Jy
! Component: 150  -  total flux cleaned = 0.163838 Jy
! Component: 200  -  total flux cleaned = 0.189994 Jy
! Total flux subtracted in 200 components = 0.189994 Jy
! Clean residual min=-0.022002 max=0.025636 Jy/beam
! Clean residual mean=0.000061 rms=0.005941 Jy/beam
! Combined flux in latest and established models = 2.30794 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 55 model components to the UV plane model.
! The established model now contains 85 components and 2.30795 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.110822Jy  sigma=2.135228
! Fit after  self-cal, rms=0.110249Jy  sigma=2.115832
! Inverting map 
print "============== Finished natural weighting CLEAN =============="
! ============== Finished natural weighting CLEAN ============== 
! 
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.01204
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.98     HN        1.00     KP        0.98     
!   LA        0.97     MK        1.02     NL        0.97     OV        0.98     
!   PT        0.98     SC        1.05     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.983722
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.01     FD        1.02     HN        0.99     KP        1.04     
!   LA        1.01     NL        1.03     OV        1.01     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.01173
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.97     HN        0.99     KP        0.99     
!   LA        0.97     MK        1.03     NL        0.97     OV        0.98     
!   PT        0.97     SC        1.06     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.98576
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.01     FD        1.02     HN        0.98     KP        1.04     
!   LA        1.01     NL        1.03     OV        1.02     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.01117
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.98     HN        0.99     KP        0.99     
!   LA        0.97     MK        1.03     NL        0.96     OV        0.98     
!   PT        0.98     SC        1.06     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.986242
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.02     FD        1.01     HN        0.98     KP        1.04     
!   LA        1.00     NL        1.02     OV        1.02     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.01093
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.97     HN        0.99     KP        0.98     
!   LA        0.98     MK        1.03     NL        0.97     OV        0.98     
!   PT        0.97     SC        1.06     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.983317
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.02     FD        1.03     HN        0.98     KP        1.04     
!   LA        1.01     NL        1.02     OV        1.02     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.0084
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.98     HN        1.00     KP        0.99     
!   LA        0.97     MK        1.02     NL        0.97     OV        0.99     
!   PT        0.98     SC        1.07     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.981259
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.01     FD        1.03     HN        1.00     KP        1.04     
!   LA        1.01     NL        1.03     OV        1.02     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.00953
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.98     HN        0.99     KP        0.99     
!   LA        0.97     MK        1.03     NL        0.97     OV        0.99     
!   PT        0.97     SC        1.06     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.980698
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.02     FD        1.03     HN        0.99     KP        1.04     
!   LA        1.01     NL        1.04     OV        1.01     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.00989
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.98     HN        0.99     KP        0.99     
!   LA        0.97     MK        1.02     NL        0.98     OV        0.98     
!   PT        0.98     SC        1.06     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.982098
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.01     FD        1.03     HN        0.99     KP        1.04     
!   LA        1.01     NL        1.03     OV        1.02     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.0087
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.98     HN        1.00     KP        0.99     
!   LA        0.97     MK        1.02     NL        0.98     OV        0.98     
!   PT        0.97     SC        1.07     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.986123
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.01     FD        1.03     HN        0.99     KP        1.02     
!   LA        1.01     NL        1.03     OV        1.01     
! 
! 
! Fit before self-cal, rms=0.110249Jy  sigma=2.115832
! Fit after  self-cal, rms=0.096687Jy  sigma=1.769852
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.096687Jy  sigma=1.769852
! Fit after  self-cal, rms=0.096683Jy  sigma=1.769762
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.049 mas, bmaj=2.449 mas, bpa=-51.28 degrees
! Estimated noise=0.31942 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0159981 Jy
! Component: 100  -  total flux cleaned = 0.0204517 Jy
! Component: 150  -  total flux cleaned = 0.0243754 Jy
! Component: 200  -  total flux cleaned = 0.0258434 Jy
! Total flux subtracted in 200 components = 0.0258434 Jy
! Clean residual min=-0.013997 max=0.013345 Jy/beam
! Clean residual mean=0.000052 rms=0.003594 Jy/beam
! Combined flux in latest and established models = 2.33379 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 32 model components to the UV plane model.
! The established model now contains 113 components and 2.33379 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.093501Jy  sigma=1.694964
! Fit after  self-cal, rms=0.093392Jy  sigma=1.690000
! Inverting map 
print "============== Finished amplitude gscale SELF-CAL =============="
! ============== Finished amplitude gscale SELF-CAL ============== 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.093392Jy  sigma=1.690000
! Fit after  self-cal, rms=0.087790Jy  sigma=1.605412
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00214874 Jy
! Component: 100  -  total flux cleaned = 0.00372268 Jy
! Component: 150  -  total flux cleaned = 0.00528054 Jy
! Component: 200  -  total flux cleaned = 0.00587596 Jy
! Total flux subtracted in 200 components = 0.00587596 Jy
! Clean residual min=-0.013061 max=0.013926 Jy/beam
! Clean residual mean=0.000051 rms=0.003515 Jy/beam
! Combined flux in latest and established models = 2.33966 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 28 model components to the UV plane model.
! The established model now contains 129 components and 2.33966 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.086668Jy  sigma=1.580297
! Fit after  self-cal, rms=0.083882Jy  sigma=1.542031
! Inverting map 
print "=== Finished natural weighting clean with shorter phase_soltime "
! === Finished natural weighting clean with shorter phase_soltime  
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.049 x 2.449 at -51.28 degrees (North through East)
! Clean map  min=-0.012808  max=1.2039 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "============== Finished amplitude self-cal =============="
  end if
! Performing amp+phase self-cal over 60 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.083882Jy  sigma=1.542031
! Fit after  self-cal, rms=0.076012Jy  sigma=1.355153
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.076012Jy  sigma=1.355153
! Fit after  self-cal, rms=0.074303Jy  sigma=1.331692
! Inverting map and beam 
! Estimated beam: bmin=1.044 mas, bmaj=2.471 mas, bpa=-51.24 degrees
! Estimated noise=0.318833 mJy/beam.
! Added new window around map position (7.2, 6.8).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0156854 Jy
! Component: 100  -  total flux cleaned = 0.0217397 Jy
! Component: 150  -  total flux cleaned = 0.0257691 Jy
! Component: 200  -  total flux cleaned = 0.0282012 Jy
! Total flux subtracted in 200 components = 0.0282012 Jy
! Clean residual min=-0.007426 max=0.006817 Jy/beam
! Clean residual mean=0.000011 rms=0.001746 Jy/beam
! Combined flux in latest and established models = 2.36787 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 29 model components to the UV plane model.
! The established model now contains 157 components and 2.36787 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.071114Jy  sigma=1.257199
! Fit after  self-cal, rms=0.069517Jy  sigma=1.234122
! Inverting map 
! ============== Finished amplitude self-cal ============== 
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8034 mas, bmaj=2.156 mas, bpa=-50.63 degrees
! Estimated noise=0.598171 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 1.02476 Jy
! Component: 100  -  total flux cleaned = 1.41929 Jy
! Component: 150  -  total flux cleaned = 1.65283 Jy
! Component: 200  -  total flux cleaned = 1.80825 Jy
! Total flux subtracted in 200 components = 1.80825 Jy
! Clean residual min=-0.035432 max=0.065470 Jy/beam
! Clean residual mean=-0.000046 rms=0.010886 Jy/beam
! Combined flux in latest and established models = 1.80825 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 34 model components to the UV plane model.
! The established model now contains 34 components and 1.80825 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.044 mas, bmaj=2.471 mas, bpa=-51.24 degrees
! Estimated noise=0.318833 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.173382 Jy
! Component: 100  -  total flux cleaned = 0.28067 Jy
! Component: 150  -  total flux cleaned = 0.350766 Jy
! Component: 200  -  total flux cleaned = 0.399134 Jy
! Total flux subtracted in 200 components = 0.399134 Jy
! Clean residual min=-0.014652 max=0.020151 Jy/beam
! Clean residual mean=-0.000007 rms=0.004829 Jy/beam
! Combined flux in latest and established models = 2.20738 Jy
! Adding 47 model components to the UV plane model.
! The established model now contains 70 components and 2.20738 Jy
! Inverting map 
clean
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0347336 Jy
! Component: 100  -  total flux cleaned = 0.0611121 Jy
! Component: 150  -  total flux cleaned = 0.0815024 Jy
! Component: 200  -  total flux cleaned = 0.0976851 Jy
! Total flux subtracted in 200 components = 0.0976851 Jy
! Clean residual min=-0.010031 max=0.011288 Jy/beam
! Clean residual mean=0.000005 rms=0.002446 Jy/beam
! Combined flux in latest and established models = 2.30506 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 44 model components to the UV plane model.
! The established model now contains 106 components and 2.30506 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.073015Jy  sigma=1.313794
! Fit after  self-cal, rms=0.071218Jy  sigma=1.285100
wmodel J2022+6136_X_map.mod
! Writing 106 model components to file: J2022+6136_X_map.mod
wobs   J2022+6136_X_uvs.fits
! Writing UV FITS file: J2022+6136_X_uvs.fits
wwins  J2022+6136_X_map.win
! wwins: Wrote 4 windows to J2022+6136_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00316697 Jy
! Component: 100  -  total flux cleaned = 0.00542556 Jy
! Component: 150  -  total flux cleaned = 0.00794859 Jy
! Component: 200  -  total flux cleaned = 0.0104648 Jy
! Component: 250  -  total flux cleaned = 0.0124487 Jy
! Component: 300  -  total flux cleaned = 0.0144726 Jy
! Component: 350  -  total flux cleaned = 0.0164145 Jy
! Component: 400  -  total flux cleaned = 0.0181671 Jy
! Component: 450  -  total flux cleaned = 0.0197432 Jy
! Component: 500  -  total flux cleaned = 0.0212587 Jy
! Component: 550  -  total flux cleaned = 0.0225118 Jy
! Component: 600  -  total flux cleaned = 0.0239253 Jy
! Component: 650  -  total flux cleaned = 0.0249969 Jy
! Component: 700  -  total flux cleaned = 0.0263183 Jy
! Component: 750  -  total flux cleaned = 0.0275045 Jy
! Component: 800  -  total flux cleaned = 0.0287388 Jy
! Component: 850  -  total flux cleaned = 0.0295094 Jy
! Component: 900  -  total flux cleaned = 0.0303418 Jy
! Component: 950  -  total flux cleaned = 0.0310699 Jy
! Component: 1000  -  total flux cleaned = 0.0318587 Jy
! Component: 1050  -  total flux cleaned = 0.0326298 Jy
! Component: 1100  -  total flux cleaned = 0.0333056 Jy
! Component: 1150  -  total flux cleaned = 0.0339635 Jy
! Component: 1200  -  total flux cleaned = 0.0345343 Jy
! Component: 1250  -  total flux cleaned = 0.0350229 Jy
! Component: 1300  -  total flux cleaned = 0.03557 Jy
! Component: 1350  -  total flux cleaned = 0.0361704 Jy
! Component: 1400  -  total flux cleaned = 0.0366932 Jy
! Component: 1450  -  total flux cleaned = 0.0372024 Jy
! Component: 1500  -  total flux cleaned = 0.037829 Jy
! Component: 1550  -  total flux cleaned = 0.0383806 Jy
! Component: 1600  -  total flux cleaned = 0.0388622 Jy
! Component: 1650  -  total flux cleaned = 0.0394517 Jy
! Component: 1700  -  total flux cleaned = 0.0398575 Jy
! Component: 1750  -  total flux cleaned = 0.0404815 Jy
! Component: 1800  -  total flux cleaned = 0.0409825 Jy
! Component: 1850  -  total flux cleaned = 0.0413105 Jy
! Component: 1900  -  total flux cleaned = 0.0418992 Jy
! Component: 1950  -  total flux cleaned = 0.042476 Jy
! Component: 2000  -  total flux cleaned = 0.0428877 Jy
! Component: 2050  -  total flux cleaned = 0.0433425 Jy
! Component: 2100  -  total flux cleaned = 0.0435915 Jy
! Component: 2150  -  total flux cleaned = 0.0439821 Jy
! Component: 2200  -  total flux cleaned = 0.0444154 Jy
! Component: 2250  -  total flux cleaned = 0.0446984 Jy
! Component: 2300  -  total flux cleaned = 0.0451153 Jy
! Component: 2350  -  total flux cleaned = 0.0453437 Jy
! Component: 2400  -  total flux cleaned = 0.0456126 Jy
! Component: 2450  -  total flux cleaned = 0.0458788 Jy
! Component: 2500  -  total flux cleaned = 0.04614 Jy
! Component: 2550  -  total flux cleaned = 0.0463125 Jy
! Component: 2600  -  total flux cleaned = 0.0466083 Jy
! Component: 2650  -  total flux cleaned = 0.0468157 Jy
! Component: 2700  -  total flux cleaned = 0.0468974 Jy
! Component: 2750  -  total flux cleaned = 0.0472609 Jy
! Component: 2800  -  total flux cleaned = 0.0473407 Jy
! Component: 2850  -  total flux cleaned = 0.0476942 Jy
! Component: 2900  -  total flux cleaned = 0.0478102 Jy
! Component: 2950  -  total flux cleaned = 0.0479246 Jy
! Component: 3000  -  total flux cleaned = 0.0481501 Jy
! Component: 3050  -  total flux cleaned = 0.0481874 Jy
! Component: 3100  -  total flux cleaned = 0.0483338 Jy
! Component: 3150  -  total flux cleaned = 0.0484781 Jy
! Component: 3200  -  total flux cleaned = 0.0485136 Jy
! Component: 3250  -  total flux cleaned = 0.0485491 Jy
! Component: 3300  -  total flux cleaned = 0.0486539 Jy
! Component: 3350  -  total flux cleaned = 0.0487906 Jy
! Component: 3400  -  total flux cleaned = 0.0487571 Jy
! Component: 3450  -  total flux cleaned = 0.0488574 Jy
! Component: 3500  -  total flux cleaned = 0.0488904 Jy
! Component: 3550  -  total flux cleaned = 0.0490213 Jy
! Component: 3600  -  total flux cleaned = 0.0489243 Jy
! Component: 3650  -  total flux cleaned = 0.0488929 Jy
! Component: 3700  -  total flux cleaned = 0.0489244 Jy
! Component: 3750  -  total flux cleaned = 0.0489872 Jy
! Component: 3800  -  total flux cleaned = 0.0489869 Jy
! Component: 3850  -  total flux cleaned = 0.0490474 Jy
! Component: 3900  -  total flux cleaned = 0.0490171 Jy
! Component: 3950  -  total flux cleaned = 0.0490764 Jy
! Component: 4000  -  total flux cleaned = 0.0489872 Jy
! Component: 4050  -  total flux cleaned = 0.0488994 Jy
! Total flux subtracted in 4096 components = 0.0490152 Jy
! Clean residual min=-0.001573 max=0.001540 Jy/beam
! Clean residual mean=0.000003 rms=0.000535 Jy/beam
! Combined flux in latest and established models = 2.35408 Jy
keep
! Adding 314 model components to the UV plane model.
! The established model now contains 413 components and 2.35408 Jy
![Exited script file: /opt64/bin/pima_mupet_02.dfm]
wmap   /vlbi/vcs9/uvm//J2022+6136_X_c_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.044 x 2.471 at -51.24 degrees (North through East)
! Clean map  min=-0.0028948  max=1.2001 Jy/beam
! Writing clean map to FITS file: /vlbi/vcs9/uvm//J2022+6136_X_c_map.fits
wmodel /vlbi/vcs9/uvm//J2022+6136_X_c_map.mod
! Writing 413 model components to file: /vlbi/vcs9/uvm//J2022+6136_X_c_map.mod
wobs   /vlbi/vcs9/uvm//J2022+6136_X_c_uvs.fits
! Writing UV FITS file: /vlbi/vcs9/uvm//J2022+6136_X_c_uvs.fits
wwins  /vlbi/vcs9/uvm//J2022+6136_X_c_map.win
! wwins: Wrote 5 windows to /vlbi/vcs9/uvm//J2022+6136_X_c_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 1.20011 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00052952 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.132368 0.132368 0.264735 0.529471 1.05894 2.11788 4.23576 8.47153 16.9431 33.8861 67.7722
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0015 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       1.2 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  2266.41 
quit
! Quitting program
! Log file /vlbi/vcs9/uvm//J2022+6136_X_c_dfm.log closed on Tue Dec 26 22:57:59 2017