! Started logfile: /vlbi/vcs9/uvm//J1938+664A_X_a_dfm.log on Tue Dec 26 22:54:09 2017
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    7.39200
obs     /vlbi/vcs9/uvm//J1938+664A_X_a_uvm.fits
! Reading UV FITS file: /vlbi/vcs9/uvm//J1938+664A_X_a_uvm.fits
! AN table 1: 85 integrations on 15 of 15 possible baselines.
! AN table 2: 76 integrations on 6 of 6 possible baselines.
! Apparent sampling: 0.976314 visibilities/baseline/integration-bin.
! Found source: J1938+664A
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 94 lines of history.
! 
! Reading 13520 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_02.dfm J1938+664A_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 60
float amp_soltime2
amp_soltime2 = 5
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.1
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_02.dvm version of 2017.12.26 === "
! === Difmap script: pima_mupet_02.dvm version of 2017.12.26 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.0342843 Jy 
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 7 telescope corrections were flagged in sub-array 1.
!  A total of 6 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 7 telescope corrections were flagged in sub-array 1.
!  A total of 6 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 7 telescope corrections were flagged in sub-array 1.
!  A total of 6 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 7 telescope corrections were flagged in sub-array 1.
!  A total of 6 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 5.
!  A total of 7 telescope corrections were flagged in sub-array 1.
!  A total of 6 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 6.
!  A total of 7 telescope corrections were flagged in sub-array 1.
!  A total of 6 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 7.
!  A total of 7 telescope corrections were flagged in sub-array 1.
!  A total of 6 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 8.
!  A total of 7 telescope corrections were flagged in sub-array 1.
!  A total of 6 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.000767Jy  sigma=26.439478
! Fit after  self-cal, rms=0.982039Jy  sigma=25.937907
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
peakwin win_mult
! Inverting map and beam 
! Estimated beam: bmin=2.763 mas, bmaj=5.704 mas, bpa=14.94 degrees
! Estimated noise=0.542493 mJy/beam.
! Added new window around map position (0, 0).
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0129668 Jy
! Component: 100  -  total flux cleaned = 0.0158405 Jy
! Total flux subtracted in 100 components = 0.0158405 Jy
! Clean residual min=-0.002601 max=0.002007 Jy/beam
! Clean residual mean=0.000004 rms=0.000834 Jy/beam
! Combined flux in latest and established models = 0.0158405 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 0.0158405 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029037Jy  sigma=0.759849
! Fit after  self-cal, rms=0.029027Jy  sigma=0.759604
! Inverting map 
print "============== Finished uniform weighting CLEAN =============="
! ============== Finished uniform weighting CLEAN ============== 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.389 mas, bmaj=6.272 mas, bpa=14.76 degrees
! Estimated noise=0.230276 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00539433 Jy
! Component: 100  -  total flux cleaned = 0.0074522 Jy
! Component: 150  -  total flux cleaned = 0.00755123 Jy
! Component: 200  -  total flux cleaned = 0.00763687 Jy
! Total flux subtracted in 200 components = 0.00763687 Jy
! Clean residual min=-0.003424 max=0.004261 Jy/beam
! Clean residual mean=0.000032 rms=0.001687 Jy/beam
! Combined flux in latest and established models = 0.0234773 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 50 model components to the UV plane model.
! The established model now contains 65 components and 0.0234773 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028196Jy  sigma=0.735876
! Fit after  self-cal, rms=0.028194Jy  sigma=0.735820
! Inverting map 
print "============== Finished natural weighting CLEAN =============="
! ============== Finished natural weighting CLEAN ============== 
! 
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.857815
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.69     KP        1.39     LA        0.78     
!   OV        1.09     PT        1.99     
! 
!  A total of 6 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.928014
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.83     KP        1.46     LA        0.53     PT        1.49     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.921091
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.95     KP        1.12     LA        0.69     
!   OV        1.30     PT        1.45     
! 
!  A total of 6 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.959501
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.73     KP        1.13     LA        0.71     PT        1.60     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.875065
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.41     FD        0.94     KP        1.11     LA        0.67     
!   OV        1.33     PT        1.41     
! 
!  A total of 6 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.926265
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.75     KP        1.13     LA        0.64     PT        1.81     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.770225
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.39     FD        0.72     KP        1.35     LA        0.83     
!   OV        1.18     PT        2.31     
! 
!  A total of 6 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.903217
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.67     KP        1.11     LA        0.76     PT        1.89     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.995951
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     FD        0.81     KP        1.10     LA        0.72     
!   OV        1.02     PT        1.26     
! 
!  A total of 6 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 1.02959
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.79     KP        1.06     LA        0.72     PT        1.32     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.932397
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.27     FD        0.78     KP        1.17     LA        0.81     
!   OV        1.04     PT        1.37     
! 
!  A total of 6 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.989886
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.76     KP        0.97     LA        0.67     PT        1.65     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.972574
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.79     KP        0.97     LA        0.82     
!   OV        1.13     PT        1.44     
! 
!  A total of 6 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.994295
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.67     KP        0.94     LA        0.75     PT        1.66     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.991201
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.90     FD        0.74     KP        1.24     LA        0.75     
!   OV        1.06     PT        1.36     
! 
!  A total of 6 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.984433
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.63     KP        1.09     LA        0.73     PT        1.62     
! 
! 
! Fit before self-cal, rms=0.028194Jy  sigma=0.735820
! Fit after  self-cal, rms=0.028175Jy  sigma=0.717068
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028175Jy  sigma=0.717068
! Fit after  self-cal, rms=0.028189Jy  sigma=0.716904
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.458 mas, bmaj=6.644 mas, bpa=10.7 degrees
! Estimated noise=0.179923 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00255909 Jy
! Component: 100  -  total flux cleaned = -0.00328677 Jy
! Component: 150  -  total flux cleaned = -0.00359031 Jy
! Component: 200  -  total flux cleaned = -0.00365287 Jy
! Total flux subtracted in 200 components = -0.00365287 Jy
! Clean residual min=-0.001136 max=0.001330 Jy/beam
! Clean residual mean=0.000009 rms=0.000376 Jy/beam
! Combined flux in latest and established models = 0.0198245 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 31 model components to the UV plane model.
! The established model now contains 94 components and 0.0198245 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028163Jy  sigma=0.709620
! Fit after  self-cal, rms=0.028164Jy  sigma=0.709603
! Inverting map 
print "============== Finished amplitude gscale SELF-CAL =============="
! ============== Finished amplitude gscale SELF-CAL ============== 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028164Jy  sigma=0.709603
! Fit after  self-cal, rms=0.028132Jy  sigma=0.706628
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000142577 Jy
! Component: 100  -  total flux cleaned = 0.000144299 Jy
! Component: 150  -  total flux cleaned = 0.000137348 Jy
! Component: 200  -  total flux cleaned = 0.000131039 Jy
! Total flux subtracted in 200 components = 0.000131039 Jy
! Clean residual min=-0.001097 max=0.001278 Jy/beam
! Clean residual mean=0.000009 rms=0.000368 Jy/beam
! Combined flux in latest and established models = 0.0199555 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 13 model components to the UV plane model.
! The established model now contains 105 components and 0.0199555 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028128Jy  sigma=0.706489
! Fit after  self-cal, rms=0.028133Jy  sigma=0.706202
! Inverting map 
print "=== Finished natural weighting clean with shorter phase_soltime "
! === Finished natural weighting clean with shorter phase_soltime  
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.458 x 6.644 at 10.7 degrees (North through East)
! Clean map  min=-0.0013473  max=0.016426 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "============== Finished amplitude self-cal =============="
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.739 mas, bmaj=5.71 mas, bpa=12.62 degrees
! Estimated noise=0.464489 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0111029 Jy
! Component: 100  -  total flux cleaned = 0.0141643 Jy
! Component: 150  -  total flux cleaned = 0.0158343 Jy
! Component: 200  -  total flux cleaned = 0.0169454 Jy
! Total flux subtracted in 200 components = 0.0169454 Jy
! Clean residual min=-0.001582 max=0.001257 Jy/beam
! Clean residual mean=0.000003 rms=0.000443 Jy/beam
! Combined flux in latest and established models = 0.0169454 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 53 model components to the UV plane model.
! The established model now contains 53 components and 0.0169454 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.458 mas, bmaj=6.644 mas, bpa=10.7 degrees
! Estimated noise=0.179923 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0027785 Jy
! Component: 100  -  total flux cleaned = 0.00345766 Jy
! Component: 150  -  total flux cleaned = 0.00333325 Jy
! Component: 200  -  total flux cleaned = 0.00324267 Jy
! Total flux subtracted in 200 components = 0.00324267 Jy
! Clean residual min=-0.001196 max=0.001637 Jy/beam
! Clean residual mean=0.000010 rms=0.000512 Jy/beam
! Combined flux in latest and established models = 0.0201881 Jy
! Adding 50 model components to the UV plane model.
! The established model now contains 94 components and 0.0201881 Jy
! Inverting map 
clean
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -4.67081e-05 Jy
! Component: 100  -  total flux cleaned = -8.24472e-05 Jy
! Component: 150  -  total flux cleaned = -8.30316e-05 Jy
! Component: 200  -  total flux cleaned = -0.0001059 Jy
! Total flux subtracted in 200 components = -0.0001059 Jy
! Clean residual min=-0.001084 max=0.001507 Jy/beam
! Clean residual mean=0.000010 rms=0.000425 Jy/beam
! Combined flux in latest and established models = 0.0200822 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 26 model components to the UV plane model.
! The established model now contains 111 components and 0.0200822 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028134Jy  sigma=0.706813
! Fit after  self-cal, rms=0.028133Jy  sigma=0.706763
wmodel J1938+664A_X_map.mod
! Writing 111 model components to file: J1938+664A_X_map.mod
wobs   J1938+664A_X_uvs.fits
! Writing UV FITS file: J1938+664A_X_uvs.fits
wwins  J1938+664A_X_map.win
! wwins: Wrote 1 windows to J1938+664A_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000614704 Jy
! Component: 100  -  total flux cleaned = 0.000994176 Jy
! Component: 150  -  total flux cleaned = 0.00125886 Jy
! Component: 200  -  total flux cleaned = 0.00142674 Jy
! Component: 250  -  total flux cleaned = 0.00158494 Jy
! Component: 300  -  total flux cleaned = 0.00170808 Jy
! Component: 350  -  total flux cleaned = 0.00186527 Jy
! Component: 400  -  total flux cleaned = 0.00200263 Jy
! Component: 450  -  total flux cleaned = 0.00209823 Jy
! Component: 500  -  total flux cleaned = 0.0021558 Jy
! Component: 550  -  total flux cleaned = 0.00221157 Jy
! Component: 600  -  total flux cleaned = 0.00227602 Jy
! Component: 650  -  total flux cleaned = 0.00230723 Jy
! Component: 700  -  total flux cleaned = 0.00232748 Jy
! Component: 750  -  total flux cleaned = 0.00234691 Jy
! Component: 800  -  total flux cleaned = 0.00233745 Jy
! Component: 850  -  total flux cleaned = 0.00236508 Jy
! Component: 900  -  total flux cleaned = 0.00237386 Jy
! Component: 950  -  total flux cleaned = 0.00237376 Jy
! Component: 1000  -  total flux cleaned = 0.00237361 Jy
! Component: 1050  -  total flux cleaned = 0.00235696 Jy
! Component: 1100  -  total flux cleaned = 0.00234052 Jy
! Component: 1150  -  total flux cleaned = 0.00238103 Jy
! Component: 1200  -  total flux cleaned = 0.00240519 Jy
! Component: 1250  -  total flux cleaned = 0.00242928 Jy
! Component: 1300  -  total flux cleaned = 0.00245313 Jy
! Component: 1350  -  total flux cleaned = 0.00246885 Jy
! Component: 1400  -  total flux cleaned = 0.00250801 Jy
! Component: 1450  -  total flux cleaned = 0.00253139 Jy
! Component: 1500  -  total flux cleaned = 0.0025625 Jy
! Component: 1550  -  total flux cleaned = 0.00260108 Jy
! Component: 1600  -  total flux cleaned = 0.00263192 Jy
! Component: 1650  -  total flux cleaned = 0.00265501 Jy
! Component: 1700  -  total flux cleaned = 0.00270096 Jy
! Component: 1750  -  total flux cleaned = 0.00271627 Jy
! Component: 1800  -  total flux cleaned = 0.00276227 Jy
! Component: 1850  -  total flux cleaned = 0.00280055 Jy
! Component: 1900  -  total flux cleaned = 0.00285408 Jy
! Component: 1950  -  total flux cleaned = 0.00292303 Jy
! Component: 2000  -  total flux cleaned = 0.00297678 Jy
! Component: 2050  -  total flux cleaned = 0.00303058 Jy
! Component: 2100  -  total flux cleaned = 0.00308445 Jy
! Component: 2150  -  total flux cleaned = 0.00314609 Jy
! Component: 2200  -  total flux cleaned = 0.00316937 Jy
! Component: 2250  -  total flux cleaned = 0.00320042 Jy
! Component: 2300  -  total flux cleaned = 0.00324715 Jy
! Component: 2350  -  total flux cleaned = 0.00328637 Jy
! Component: 2400  -  total flux cleaned = 0.00330992 Jy
! Component: 2450  -  total flux cleaned = 0.00333349 Jy
! Component: 2500  -  total flux cleaned = 0.00337316 Jy
! Component: 2550  -  total flux cleaned = 0.00338914 Jy
! Component: 2600  -  total flux cleaned = 0.00343725 Jy
! Component: 2650  -  total flux cleaned = 0.00348567 Jy
! Component: 2700  -  total flux cleaned = 0.00352627 Jy
! Component: 2750  -  total flux cleaned = 0.00356711 Jy
! Component: 2800  -  total flux cleaned = 0.00360825 Jy
! Component: 2850  -  total flux cleaned = 0.00364143 Jy
! Component: 2900  -  total flux cleaned = 0.0036914 Jy
! Component: 2950  -  total flux cleaned = 0.00374182 Jy
! Component: 3000  -  total flux cleaned = 0.00377563 Jy
! Component: 3050  -  total flux cleaned = 0.00380975 Jy
! Component: 3100  -  total flux cleaned = 0.00387003 Jy
! Component: 3150  -  total flux cleaned = 0.00393943 Jy
! Component: 3200  -  total flux cleaned = 0.0040094 Jy
! Component: 3250  -  total flux cleaned = 0.00408014 Jy
! Component: 3300  -  total flux cleaned = 0.00416064 Jy
! Component: 3350  -  total flux cleaned = 0.00423305 Jy
! Component: 3400  -  total flux cleaned = 0.00429717 Jy
! Component: 3450  -  total flux cleaned = 0.00436189 Jy
! Component: 3500  -  total flux cleaned = 0.0044368 Jy
! Component: 3550  -  total flux cleaned = 0.00450314 Jy
! Component: 3600  -  total flux cleaned = 0.00457996 Jy
! Component: 3650  -  total flux cleaned = 0.00464796 Jy
! Component: 3700  -  total flux cleaned = 0.00471683 Jy
! Component: 3750  -  total flux cleaned = 0.00478664 Jy
! Component: 3800  -  total flux cleaned = 0.00485719 Jy
! Component: 3850  -  total flux cleaned = 0.00494923 Jy
! Component: 3900  -  total flux cleaned = 0.00502186 Jy
! Component: 3950  -  total flux cleaned = 0.00510589 Jy
! Component: 4000  -  total flux cleaned = 0.00516978 Jy
! Component: 4050  -  total flux cleaned = 0.00524547 Jy
! Total flux subtracted in 4096 components = 0.00530017 Jy
! Clean residual min=-0.000591 max=0.000688 Jy/beam
! Clean residual mean=0.000006 rms=0.000235 Jy/beam
! Combined flux in latest and established models = 0.0253824 Jy
keep
! Adding 297 model components to the UV plane model.
! The established model now contains 408 components and 0.0253824 Jy
![Exited script file: /opt64/bin/pima_mupet_02.dfm]
wmap   /vlbi/vcs9/uvm//J1938+664A_X_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.458 x 6.644 at 10.7 degrees (North through East)
! Clean map  min=-0.0012982  max=0.016123 Jy/beam
! Writing clean map to FITS file: /vlbi/vcs9/uvm//J1938+664A_X_a_map.fits
wmodel /vlbi/vcs9/uvm//J1938+664A_X_a_map.mod
! Writing 408 model components to file: /vlbi/vcs9/uvm//J1938+664A_X_a_map.mod
wobs   /vlbi/vcs9/uvm//J1938+664A_X_a_uvs.fits
! Writing UV FITS file: /vlbi/vcs9/uvm//J1938+664A_X_a_uvs.fits
wwins  /vlbi/vcs9/uvm//J1938+664A_X_a_map.win
! wwins: Wrote 2 windows to /vlbi/vcs9/uvm//J1938+664A_X_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0161229 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000307252 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -5.71706 5.71706 11.4341 22.8682 45.7365 91.473
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.016 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  52.474 
quit
! Quitting program
! Log file /vlbi/vcs9/uvm//J1938+664A_X_a_dfm.log closed on Tue Dec 26 22:54:13 2017