! Started logfile: /vlbi/vcs9/uvm//J1633+7405_X_a_dfm.log on Tue Dec 26 22:45:50 2017
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    7.39200
obs     /vlbi/vcs9/uvm//J1633+7405_X_a_uvm.fits
! Reading UV FITS file: /vlbi/vcs9/uvm//J1633+7405_X_a_uvm.fits
! AN table 1: 24 integrations on 21 of 21 possible baselines.
! AN table 2: 20 integrations on 1 of 1 possible baselines.
! AN table 3: 43 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.866795 visibilities/baseline/integration-bin.
! Found source: J1633+7405
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 94 lines of history.
! 
! Reading 14368 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_02.dfm J1633+7405_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 60
float amp_soltime2
amp_soltime2 = 5
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.1
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_02.dvm version of 2017.12.26 === "
! === Difmap script: pima_mupet_02.dvm version of 2017.12.26 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.0348793 Jy 
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 23 telescope corrections were flagged in sub-array 1.
!  A total of 40 telescope corrections were flagged in sub-array 2.
!  A total of 24 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 2.
!  A total of 23 telescope corrections were flagged in sub-array 1.
!  A total of 40 telescope corrections were flagged in sub-array 2.
!  A total of 24 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 3.
!  A total of 23 telescope corrections were flagged in sub-array 1.
!  A total of 40 telescope corrections were flagged in sub-array 2.
!  A total of 24 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 4.
!  A total of 23 telescope corrections were flagged in sub-array 1.
!  A total of 40 telescope corrections were flagged in sub-array 2.
!  A total of 24 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 5.
!  A total of 23 telescope corrections were flagged in sub-array 1.
!  A total of 40 telescope corrections were flagged in sub-array 2.
!  A total of 24 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 6.
!  A total of 23 telescope corrections were flagged in sub-array 1.
!  A total of 40 telescope corrections were flagged in sub-array 2.
!  A total of 24 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 7.
!  A total of 23 telescope corrections were flagged in sub-array 1.
!  A total of 40 telescope corrections were flagged in sub-array 2.
!  A total of 24 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 8.
!  A total of 23 telescope corrections were flagged in sub-array 1.
!  A total of 40 telescope corrections were flagged in sub-array 2.
!  A total of 24 telescope corrections were flagged in sub-array 3.
! 
! Fit before self-cal, rms=1.000560Jy  sigma=24.730120
! Fit after  self-cal, rms=0.987650Jy  sigma=24.440121
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
peakwin win_mult
! Inverting map and beam 
! Estimated beam: bmin=0.7487 mas, bmaj=3.206 mas, bpa=56.28 degrees
! Estimated noise=0.572852 mJy/beam.
! Added new window around map position (0, 0).
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0111671 Jy
! Component: 100  -  total flux cleaned = 0.0117529 Jy
! Total flux subtracted in 100 components = 0.0117529 Jy
! Clean residual min=-0.001993 max=0.002036 Jy/beam
! Clean residual mean=-0.000000 rms=0.000495 Jy/beam
! Combined flux in latest and established models = 0.0117529 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.0117529 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032429Jy  sigma=0.695343
! Fit after  self-cal, rms=0.032414Jy  sigma=0.694839
! Inverting map 
print "============== Finished uniform weighting CLEAN =============="
! ============== Finished uniform weighting CLEAN ============== 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.163 mas, bmaj=3.381 mas, bpa=58.08 degrees
! Estimated noise=0.239842 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000115586 Jy
! Component: 100  -  total flux cleaned = -5.90091e-05 Jy
! Component: 150  -  total flux cleaned = -3.62278e-05 Jy
! Component: 200  -  total flux cleaned = -6.41779e-06 Jy
! Total flux subtracted in 200 components = -6.41779e-06 Jy
! Clean residual min=-0.000999 max=0.000973 Jy/beam
! Clean residual mean=-0.000002 rms=0.000227 Jy/beam
! Combined flux in latest and established models = 0.0117464 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 15 model components to the UV plane model.
! The established model now contains 20 components and 0.0117464 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032399Jy  sigma=0.694579
! Fit after  self-cal, rms=0.032399Jy  sigma=0.694568
! Inverting map 
print "============== Finished natural weighting CLEAN =============="
! ============== Finished natural weighting CLEAN ============== 
! 
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.985087
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.97     HN        1.18     KP        1.30     
!   NL        0.94     OV        0.71     PT        1.05     
! 
!  Amplitude normalization factor in sub-array 2: 1
!  Telescope amplitude corrections in sub-array 2:
!   KP        0.00*    SC        0.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 3.
!  Amplitude normalization factor in sub-array 3: 0.977826
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.93     FD        0.97     KP        0.94     LA        1.22     
!   MK        0.82     NL        1.10     OV        0.74     PT        1.21     
!   SC        1.28     
! 
! 
! Correcting IF 2.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.980605
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.08     HN        0.78     KP        0.98     
!   NL        1.23     OV        0.86     PT        1.11     
! 
!  Amplitude normalization factor in sub-array 2: 1
!  Telescope amplitude corrections in sub-array 2:
!   KP        0.00*    SC        0.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 3.
!  Amplitude normalization factor in sub-array 3: 0.944298
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.30     FD        0.88     KP        0.95     LA        1.21     
!   MK        1.20     NL        0.96     OV        0.93     PT        1.11     
!   SC        1.00     
! 
! 
! Correcting IF 3.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.9868
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.22     FD        1.35     HN        0.98     KP        0.85     
!   NL        0.97     OV        0.78     PT        0.95     
! 
!  Amplitude normalization factor in sub-array 2: 1
!  Telescope amplitude corrections in sub-array 2:
!   KP        0.00*    SC        0.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 3.
!  Amplitude normalization factor in sub-array 3: 0.927518
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.16     FD        1.09     KP        0.83     LA        1.36     
!   MK        1.02     NL        1.01     OV        0.88     PT        1.11     
!   SC        1.24     
! 
! 
! Correcting IF 4.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.01385
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     FD        0.99     HN        0.92     KP        0.81     
!   NL        0.95     OV        1.18     PT        0.94     
! 
!  Amplitude normalization factor in sub-array 2: 1
!  Telescope amplitude corrections in sub-array 2:
!   KP        0.00*    SC        0.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 3.
!  Amplitude normalization factor in sub-array 3: 0.939587
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.17     FD        1.06     KP        0.96     LA        1.04     
!   MK        0.80     NL        1.53     OV        0.91     PT        1.19     
!   SC        0.90     
! 
! 
! Correcting IF 5.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.06022
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        0.94     HN        0.88     KP        0.82     
!   NL        0.80     OV        0.95     PT        1.12     
! 
!  Amplitude normalization factor in sub-array 2: 1
!  Telescope amplitude corrections in sub-array 2:
!   KP        0.00*    SC        0.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 3.
!  Amplitude normalization factor in sub-array 3: 0.984465
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.11     FD        0.91     KP        0.75     LA        1.30     
!   MK        1.08     NL        0.88     OV        0.75     PT        1.33     
!   SC        1.02     
! 
! 
! Correcting IF 6.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.983264
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.77     HN        0.75     KP        0.96     
!   NL        1.01     OV        1.23     PT        1.37     
! 
!  Amplitude normalization factor in sub-array 2: 1
!  Telescope amplitude corrections in sub-array 2:
!   KP        0.00*    SC        0.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 3.
!  Amplitude normalization factor in sub-array 3: 0.958443
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.28     FD        1.29     KP        0.85     LA        0.91     
!   MK        1.03     NL        0.85     OV        1.00     PT        1.17     
!   SC        1.01     
! 
! 
! Correcting IF 7.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.05378
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.72     FD        0.81     HN        0.84     KP        0.80     
!   NL        0.96     OV        1.07     PT        1.44     
! 
!  Amplitude normalization factor in sub-array 2: 1
!  Telescope amplitude corrections in sub-array 2:
!   KP        0.00*    SC        0.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 3.
!  Amplitude normalization factor in sub-array 3: 1.00122
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.85     FD        1.30     KP        1.00     LA        1.13     
!   MK        0.84     NL        1.02     OV        0.71     PT        1.11     
!   SC        1.02     
! 
! 
! Correcting IF 8.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.995964
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.36     FD        0.70     HN        0.96     KP        0.80     
!   NL        1.35     OV        0.97     PT        0.89     
! 
!  Amplitude normalization factor in sub-array 2: 1
!  Telescope amplitude corrections in sub-array 2:
!   KP        0.00*    SC        0.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 3.
!  Amplitude normalization factor in sub-array 3: 1.00852
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.80     FD        0.96     KP        0.97     LA        1.14     
!   MK        0.86     NL        1.32     OV        0.82     PT        1.05     
!   SC        1.01     
! 
! 
! Fit before self-cal, rms=0.032399Jy  sigma=0.694568
! Fit after  self-cal, rms=0.032426Jy  sigma=0.692231
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032426Jy  sigma=0.692231
! Fit after  self-cal, rms=0.032431Jy  sigma=0.692175
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.155 mas, bmaj=3.366 mas, bpa=57.87 degrees
! Estimated noise=0.223425 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000477038 Jy
! Component: 100  -  total flux cleaned = -0.000516649 Jy
! Component: 150  -  total flux cleaned = -0.000546248 Jy
! Component: 200  -  total flux cleaned = -0.000566958 Jy
! Total flux subtracted in 200 components = -0.000566958 Jy
! Clean residual min=-0.000613 max=0.000543 Jy/beam
! Clean residual mean=0.000002 rms=0.000142 Jy/beam
! Combined flux in latest and established models = 0.0111795 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 22 model components to the UV plane model.
! The established model now contains 39 components and 0.0111795 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032430Jy  sigma=0.691974
! Fit after  self-cal, rms=0.032430Jy  sigma=0.691970
! Inverting map 
print "============== Finished amplitude gscale SELF-CAL =============="
! ============== Finished amplitude gscale SELF-CAL ============== 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032430Jy  sigma=0.691970
! Fit after  self-cal, rms=0.032399Jy  sigma=0.690638
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 2.75975e-05 Jy
! Component: 100  -  total flux cleaned = 2.3148e-05 Jy
! Component: 150  -  total flux cleaned = 2.35664e-05 Jy
! Component: 200  -  total flux cleaned = 2.69573e-05 Jy
! Total flux subtracted in 200 components = 2.69573e-05 Jy
! Clean residual min=-0.000632 max=0.000538 Jy/beam
! Clean residual mean=0.000002 rms=0.000141 Jy/beam
! Combined flux in latest and established models = 0.0112064 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 14 model components to the UV plane model.
! The established model now contains 46 components and 0.0112064 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032397Jy  sigma=0.690617
! Fit after  self-cal, rms=0.032394Jy  sigma=0.690287
! Inverting map 
print "=== Finished natural weighting clean with shorter phase_soltime "
! === Finished natural weighting clean with shorter phase_soltime  
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.155 x 3.366 at 57.87 degrees (North through East)
! Clean map  min=-0.00061337  max=0.011859 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "============== Finished amplitude self-cal =============="
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7398 mas, bmaj=3.181 mas, bpa=56.22 degrees
! Estimated noise=0.5447 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0106643 Jy
! Component: 100  -  total flux cleaned = 0.0112648 Jy
! Component: 150  -  total flux cleaned = 0.0111258 Jy
! Component: 200  -  total flux cleaned = 0.0111552 Jy
! Total flux subtracted in 200 components = 0.0111552 Jy
! Clean residual min=-0.001659 max=0.001537 Jy/beam
! Clean residual mean=0.000001 rms=0.000396 Jy/beam
! Combined flux in latest and established models = 0.0111551 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.0111551 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.155 mas, bmaj=3.366 mas, bpa=57.87 degrees
! Estimated noise=0.223425 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 6.22512e-05 Jy
! Component: 100  -  total flux cleaned = 5.52886e-05 Jy
! Component: 150  -  total flux cleaned = 3.26296e-05 Jy
! Component: 200  -  total flux cleaned = 3.21069e-05 Jy
! Total flux subtracted in 200 components = 3.21069e-05 Jy
! Clean residual min=-0.000617 max=0.000541 Jy/beam
! Clean residual mean=0.000002 rms=0.000142 Jy/beam
! Combined flux in latest and established models = 0.0111873 Jy
! Adding 21 model components to the UV plane model.
! The established model now contains 35 components and 0.0111873 Jy
! Inverting map 
clean
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -5.46935e-06 Jy
! Component: 100  -  total flux cleaned = -5.20548e-06 Jy
! Component: 150  -  total flux cleaned = -5.18567e-06 Jy
! Component: 200  -  total flux cleaned = -5.06466e-06 Jy
! Total flux subtracted in 200 components = -5.06466e-06 Jy
! Clean residual min=-0.000621 max=0.000540 Jy/beam
! Clean residual mean=0.000002 rms=0.000141 Jy/beam
! Combined flux in latest and established models = 0.0111822 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 15 model components to the UV plane model.
! The established model now contains 38 components and 0.0111822 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032393Jy  sigma=0.690295
! Fit after  self-cal, rms=0.032393Jy  sigma=0.690133
wmodel J1633+7405_X_map.mod
! Writing 38 model components to file: J1633+7405_X_map.mod
wobs   J1633+7405_X_uvs.fits
! Writing UV FITS file: J1633+7405_X_uvs.fits
wwins  J1633+7405_X_map.win
! wwins: Wrote 1 windows to J1633+7405_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000105817 Jy
! Component: 100  -  total flux cleaned = -0.000124392 Jy
! Component: 150  -  total flux cleaned = -0.000159266 Jy
! Component: 200  -  total flux cleaned = -0.000184233 Jy
! Component: 250  -  total flux cleaned = -0.000216103 Jy
! Component: 300  -  total flux cleaned = -0.000193535 Jy
! Component: 350  -  total flux cleaned = -0.000171706 Jy
! Component: 400  -  total flux cleaned = -0.000136192 Jy
! Component: 450  -  total flux cleaned = -9.50154e-05 Jy
! Component: 500  -  total flux cleaned = -5.49917e-05 Jy
! Component: 550  -  total flux cleaned = -2.91006e-05 Jy
! Component: 600  -  total flux cleaned = -3.53798e-05 Jy
! Component: 650  -  total flux cleaned = -2.90496e-05 Jy
! Component: 700  -  total flux cleaned = -2.9061e-05 Jy
! Component: 750  -  total flux cleaned = -2.32722e-05 Jy
! Component: 800  -  total flux cleaned = -4.07493e-05 Jy
! Component: 850  -  total flux cleaned = -5.21442e-05 Jy
! Component: 900  -  total flux cleaned = -7.44658e-05 Jy
! Component: 950  -  total flux cleaned = -7.45368e-05 Jy
! Component: 1000  -  total flux cleaned = -7.9946e-05 Jy
! Component: 1050  -  total flux cleaned = -8.53496e-05 Jy
! Component: 1100  -  total flux cleaned = -8.53843e-05 Jy
! Component: 1150  -  total flux cleaned = -0.000100811 Jy
! Component: 1200  -  total flux cleaned = -9.56477e-05 Jy
! Component: 1250  -  total flux cleaned = -8.56305e-05 Jy
! Component: 1300  -  total flux cleaned = -8.06741e-05 Jy
! Component: 1350  -  total flux cleaned = -7.09183e-05 Jy
! Component: 1400  -  total flux cleaned = -7.09094e-05 Jy
! Component: 1450  -  total flux cleaned = -6.61637e-05 Jy
! Component: 1500  -  total flux cleaned = -5.20815e-05 Jy
! Component: 1550  -  total flux cleaned = -4.28163e-05 Jy
! Component: 1600  -  total flux cleaned = -5.65016e-05 Jy
! Component: 1650  -  total flux cleaned = -5.64324e-05 Jy
! Component: 1700  -  total flux cleaned = -5.6406e-05 Jy
! Component: 1750  -  total flux cleaned = -5.63778e-05 Jy
! Component: 1800  -  total flux cleaned = -6.95485e-05 Jy
! Component: 1850  -  total flux cleaned = -6.94882e-05 Jy
! Component: 1900  -  total flux cleaned = -7.80351e-05 Jy
! Component: 1950  -  total flux cleaned = -6.94466e-05 Jy
! Component: 2000  -  total flux cleaned = -6.93846e-05 Jy
! Component: 2050  -  total flux cleaned = -6.51845e-05 Jy
! Component: 2100  -  total flux cleaned = -6.51962e-05 Jy
! Component: 2150  -  total flux cleaned = -5.69362e-05 Jy
! Component: 2200  -  total flux cleaned = -6.10384e-05 Jy
! Component: 2250  -  total flux cleaned = -6.50555e-05 Jy
! Component: 2300  -  total flux cleaned = -7.30579e-05 Jy
! Component: 2350  -  total flux cleaned = -6.50835e-05 Jy
! Component: 2400  -  total flux cleaned = -6.50666e-05 Jy
! Component: 2450  -  total flux cleaned = -6.90184e-05 Jy
! Component: 2500  -  total flux cleaned = -5.73503e-05 Jy
! Component: 2550  -  total flux cleaned = -4.96449e-05 Jy
! Component: 2600  -  total flux cleaned = -3.43797e-05 Jy
! Component: 2650  -  total flux cleaned = -2.30243e-05 Jy
! Component: 2700  -  total flux cleaned = -1.1722e-05 Jy
! Component: 2750  -  total flux cleaned = -5.3428e-07 Jy
! Component: 2800  -  total flux cleaned = 1.43159e-05 Jy
! Component: 2850  -  total flux cleaned = 2.9051e-05 Jy
! Component: 2900  -  total flux cleaned = 3.63689e-05 Jy
! Component: 2950  -  total flux cleaned = 4.73065e-05 Jy
! Component: 3000  -  total flux cleaned = 5.81578e-05 Jy
! Component: 3050  -  total flux cleaned = 7.2521e-05 Jy
! Component: 3100  -  total flux cleaned = 6.89729e-05 Jy
! Component: 3150  -  total flux cleaned = 8.32083e-05 Jy
! Component: 3200  -  total flux cleaned = 8.32297e-05 Jy
! Component: 3250  -  total flux cleaned = 7.97383e-05 Jy
! Component: 3300  -  total flux cleaned = 9.37082e-05 Jy
! Component: 3350  -  total flux cleaned = 9.71677e-05 Jy
! Component: 3400  -  total flux cleaned = 0.000107566 Jy
! Component: 3450  -  total flux cleaned = 0.000100675 Jy
! Component: 3500  -  total flux cleaned = 0.000107519 Jy
! Component: 3550  -  total flux cleaned = 0.000117732 Jy
! Component: 3600  -  total flux cleaned = 0.00012789 Jy
! Component: 3650  -  total flux cleaned = 0.000127895 Jy
! Component: 3700  -  total flux cleaned = 0.000134588 Jy
! Component: 3750  -  total flux cleaned = 0.000141244 Jy
! Component: 3800  -  total flux cleaned = 0.000147861 Jy
! Component: 3850  -  total flux cleaned = 0.000144575 Jy
! Component: 3900  -  total flux cleaned = 0.000141273 Jy
! Component: 3950  -  total flux cleaned = 0.000144549 Jy
! Component: 4000  -  total flux cleaned = 0.000151043 Jy
! Component: 4050  -  total flux cleaned = 0.000147793 Jy
! Total flux subtracted in 4096 components = 0.000151037 Jy
! Clean residual min=-0.000207 max=0.000194 Jy/beam
! Clean residual mean=0.000001 rms=0.000056 Jy/beam
! Combined flux in latest and established models = 0.0113332 Jy
keep
! Adding 246 model components to the UV plane model.
! The established model now contains 284 components and 0.0113332 Jy
![Exited script file: /opt64/bin/pima_mupet_02.dfm]
wmap   /vlbi/vcs9/uvm//J1633+7405_X_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.155 x 3.366 at 57.87 degrees (North through East)
! Clean map  min=-0.00036542  max=0.011882 Jy/beam
! Writing clean map to FITS file: /vlbi/vcs9/uvm//J1633+7405_X_a_map.fits
wmodel /vlbi/vcs9/uvm//J1633+7405_X_a_map.mod
! Writing 284 model components to file: /vlbi/vcs9/uvm//J1633+7405_X_a_map.mod
wobs   /vlbi/vcs9/uvm//J1633+7405_X_a_uvs.fits
! Writing UV FITS file: /vlbi/vcs9/uvm//J1633+7405_X_a_uvs.fits
wwins  /vlbi/vcs9/uvm//J1633+7405_X_a_map.win
! wwins: Wrote 2 windows to /vlbi/vcs9/uvm//J1633+7405_X_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0118825 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 5.58775e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.41076 1.41076 2.82151 5.64302 11.286 22.5721 45.1442 90.2883
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.011 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  212.652 
quit
! Quitting program
! Log file /vlbi/vcs9/uvm//J1633+7405_X_a_dfm.log closed on Tue Dec 26 22:45:54 2017