! Started logfile: /vlbi/vcs9/uvm//J1628-3343_X_a_dfm.log on Tue Dec 26 22:45:19 2017 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 7.39200 obs /vlbi/vcs9/uvm//J1628-3343_X_a_uvm.fits ! Reading UV FITS file: /vlbi/vcs9/uvm//J1628-3343_X_a_uvm.fits ! AN table 1: 94 integrations on 15 of 15 possible baselines. ! AN table 2: 94 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.9474 visibilities/baseline/integration-bin. ! Found source: J1628-3343 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 7.392e+09 3.2e+07 1 3.2e+07 ! 02 2 7.424e+09 3.2e+07 1 3.2e+07 ! 03 3 7.456e+09 3.2e+07 1 3.2e+07 ! 04 4 7.552e+09 3.2e+07 1 3.2e+07 ! 05 5 7.744e+09 3.2e+07 1 3.2e+07 ! 06 6 7.776e+09 3.2e+07 1 3.2e+07 ! 07 7 7.808e+09 3.2e+07 1 3.2e+07 ! 08 8 7.84e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 85 lines of history. ! ! Reading 25648 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 8 channels. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_02.dfm J1628-3343_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 60 float amp_soltime2 amp_soltime2 = 5 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.1 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_02.dvm version of 2017.12.26 === " ! === Difmap script: pima_mupet_02.dvm version of 2017.12.26 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.0411831 Jy startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.000774Jy sigma=19.143840 ! Fit after self-cal, rms=0.980314Jy sigma=18.769034 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. peakwin win_mult ! Inverting map and beam ! Estimated beam: bmin=0.9592 mas, bmaj=5.988 mas, bpa=7.284 degrees ! Estimated noise=0.786733 mJy/beam. ! Added new window around map position (0, 0). flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0168434 Jy ! Component: 100 - total flux cleaned = 0.0187482 Jy ! Total flux subtracted in 100 components = 0.0187482 Jy ! Clean residual min=-0.001885 max=0.001941 Jy/beam ! Clean residual mean=0.000002 rms=0.000573 Jy/beam ! Combined flux in latest and established models = 0.0187482 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.0187482 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.035690Jy sigma=0.647417 ! Fit after self-cal, rms=0.035685Jy sigma=0.647320 ! Inverting map print "============== Finished uniform weighting CLEAN ==============" ! ============== Finished uniform weighting CLEAN ============== ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.428 mas, bmaj=6.651 mas, bpa=5.151 degrees ! Estimated noise=0.230818 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000204378 Jy ! Component: 100 - total flux cleaned = 6.67724e-05 Jy ! Component: 150 - total flux cleaned = -2.43726e-05 Jy ! Component: 200 - total flux cleaned = -8.88038e-05 Jy ! Total flux subtracted in 200 components = -8.88038e-05 Jy ! Clean residual min=-0.001271 max=0.001264 Jy/beam ! Clean residual mean=0.000004 rms=0.000346 Jy/beam ! Combined flux in latest and established models = 0.0186594 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 41 components and 0.0186594 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.035632Jy sigma=0.646419 ! Fit after self-cal, rms=0.035632Jy sigma=0.646413 ! Inverting map print "============== Finished natural weighting CLEAN ==============" ! ============== Finished natural weighting CLEAN ============== ! gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.02423 ! Telescope amplitude corrections in sub-array 1: ! BR 0.66 KP 0.93 LA 1.10 NL 1.09 ! OV 0.95 PT 1.12 ! ! Amplitude normalization factor in sub-array 2: 0.92668 ! Telescope amplitude corrections in sub-array 2: ! FD 0.87 KP 1.24 LA 1.05 NL 1.05 ! OV 1.11 PT 1.25 SC 0.98 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.02407 ! Telescope amplitude corrections in sub-array 1: ! BR 0.82 KP 0.82 LA 1.14 NL 1.01 ! OV 1.00 PT 1.07 ! ! Amplitude normalization factor in sub-array 2: 0.938567 ! Telescope amplitude corrections in sub-array 2: ! FD 1.12 KP 1.00 LA 1.12 NL 0.93 ! OV 0.91 PT 1.18 SC 1.19 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.04061 ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 KP 0.82 LA 1.16 NL 0.89 ! OV 0.89 PT 1.09 ! ! Amplitude normalization factor in sub-array 2: 0.955605 ! Telescope amplitude corrections in sub-array 2: ! FD 0.96 KP 1.03 LA 1.01 NL 1.05 ! OV 1.02 PT 1.23 SC 1.03 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.04862 ! Telescope amplitude corrections in sub-array 1: ! BR 0.84 KP 0.96 LA 0.92 NL 1.00 ! OV 0.83 PT 1.17 ! ! Amplitude normalization factor in sub-array 2: 0.90699 ! Telescope amplitude corrections in sub-array 2: ! FD 1.21 KP 1.20 LA 1.22 NL 1.19 ! OV 0.95 PT 1.08 SC 0.87 ! ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.04074 ! Telescope amplitude corrections in sub-array 1: ! BR 0.84 KP 0.88 LA 1.08 NL 0.86 ! OV 0.95 PT 1.16 ! ! Amplitude normalization factor in sub-array 2: 0.938292 ! Telescope amplitude corrections in sub-array 2: ! FD 1.03 KP 0.93 LA 1.18 NL 1.04 ! OV 1.03 PT 1.34 SC 0.91 ! ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.04611 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 KP 0.82 LA 1.02 NL 0.90 ! OV 0.78 PT 1.24 ! ! Amplitude normalization factor in sub-array 2: 0.979919 ! Telescope amplitude corrections in sub-array 2: ! FD 1.08 KP 0.87 LA 1.16 NL 0.87 ! OV 0.91 PT 1.20 SC 1.06 ! ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.10216 ! Telescope amplitude corrections in sub-array 1: ! BR 0.73 KP 0.88 LA 1.00 NL 0.96 ! OV 0.83 PT 1.05 ! ! Amplitude normalization factor in sub-array 2: 1.03684 ! Telescope amplitude corrections in sub-array 2: ! FD 0.97 KP 0.94 LA 0.97 NL 0.98 ! OV 0.91 PT 1.00 SC 0.98 ! ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.07738 ! Telescope amplitude corrections in sub-array 1: ! BR 0.73 KP 0.89 LA 1.05 NL 0.96 ! OV 0.81 PT 1.13 ! ! Amplitude normalization factor in sub-array 2: 0.974267 ! Telescope amplitude corrections in sub-array 2: ! FD 0.96 KP 0.91 LA 1.15 NL 1.13 ! OV 0.97 PT 1.21 SC 0.87 ! ! ! Fit before self-cal, rms=0.035632Jy sigma=0.646413 ! Fit after self-cal, rms=0.035432Jy sigma=0.643952 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.035432Jy sigma=0.643952 ! Fit after self-cal, rms=0.035433Jy sigma=0.643943 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.359 mas, bmaj=6.475 mas, bpa=5.346 degrees ! Estimated noise=0.221642 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000114681 Jy ! Component: 100 - total flux cleaned = -0.000131 Jy ! Component: 150 - total flux cleaned = -0.000128662 Jy ! Component: 200 - total flux cleaned = -0.000127303 Jy ! Total flux subtracted in 200 components = -0.000127303 Jy ! Clean residual min=-0.000867 max=0.000745 Jy/beam ! Clean residual mean=-0.000001 rms=0.000197 Jy/beam ! Combined flux in latest and established models = 0.0185321 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 51 components and 0.0185321 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.035429Jy sigma=0.643749 ! Fit after self-cal, rms=0.035429Jy sigma=0.643747 ! Inverting map print "============== Finished amplitude gscale SELF-CAL ==============" ! ============== Finished amplitude gscale SELF-CAL ============== ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.035429Jy sigma=0.643747 ! Fit after self-cal, rms=0.035397Jy sigma=0.642990 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 2.96423e-05 Jy ! Component: 100 - total flux cleaned = 3.41047e-05 Jy ! Component: 150 - total flux cleaned = 3.76446e-05 Jy ! Component: 200 - total flux cleaned = 3.76232e-05 Jy ! Total flux subtracted in 200 components = 3.76232e-05 Jy ! Clean residual min=-0.000868 max=0.000761 Jy/beam ! Clean residual mean=-0.000001 rms=0.000196 Jy/beam ! Combined flux in latest and established models = 0.0185697 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 63 components and 0.0185697 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.035397Jy sigma=0.642974 ! Fit after self-cal, rms=0.035396Jy sigma=0.642901 ! Inverting map print "=== Finished natural weighting clean with shorter phase_soltime " ! === Finished natural weighting clean with shorter phase_soltime ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.359 x 6.475 at 5.346 degrees (North through East) ! Clean map min=-0.00084305 max=0.019932 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "============== Finished amplitude self-cal ==============" end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9382 mas, bmaj=5.996 mas, bpa=7.37 degrees ! Estimated noise=0.737081 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0158686 Jy ! Component: 100 - total flux cleaned = 0.0182207 Jy ! Component: 150 - total flux cleaned = 0.0187008 Jy ! Component: 200 - total flux cleaned = 0.0190204 Jy ! Total flux subtracted in 200 components = 0.0190204 Jy ! Clean residual min=-0.001515 max=0.001487 Jy/beam ! Clean residual mean=-0.000000 rms=0.000478 Jy/beam ! Combined flux in latest and established models = 0.0190204 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 38 model components to the UV plane model. ! The established model now contains 38 components and 0.0190204 Jy ! Inverting map and beam ! Estimated beam: bmin=1.359 mas, bmaj=6.475 mas, bpa=5.346 degrees ! Estimated noise=0.221642 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000131957 Jy ! Component: 100 - total flux cleaned = -0.000251067 Jy ! Component: 150 - total flux cleaned = -0.000346429 Jy ! Component: 200 - total flux cleaned = -0.000401933 Jy ! Total flux subtracted in 200 components = -0.000401933 Jy ! Clean residual min=-0.000875 max=0.000790 Jy/beam ! Clean residual mean=-0.000000 rms=0.000202 Jy/beam ! Combined flux in latest and established models = 0.0186185 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 62 components and 0.0186185 Jy ! Inverting map clean ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -3.32e-05 Jy ! Component: 100 - total flux cleaned = -6.03387e-05 Jy ! Component: 150 - total flux cleaned = -8.26602e-05 Jy ! Component: 200 - total flux cleaned = -0.00010187 Jy ! Total flux subtracted in 200 components = -0.00010187 Jy ! Clean residual min=-0.000857 max=0.000770 Jy/beam ! Clean residual mean=-0.000000 rms=0.000200 Jy/beam ! Combined flux in latest and established models = 0.0185166 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 73 components and 0.0185166 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.035397Jy sigma=0.642926 ! Fit after self-cal, rms=0.035398Jy sigma=0.642920 wmodel J1628-3343_X_map.mod ! Writing 73 model components to file: J1628-3343_X_map.mod wobs J1628-3343_X_uvs.fits ! Writing UV FITS file: J1628-3343_X_uvs.fits wwins J1628-3343_X_map.win ! wwins: Wrote 1 windows to J1628-3343_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -1.16797e-05 Jy ! Component: 100 - total flux cleaned = 0.000123932 Jy ! Component: 150 - total flux cleaned = 0.000234458 Jy ! Component: 200 - total flux cleaned = 0.000285467 Jy ! Component: 250 - total flux cleaned = 0.000257371 Jy ! Component: 300 - total flux cleaned = 0.00025737 Jy ! Component: 350 - total flux cleaned = 0.000282374 Jy ! Component: 400 - total flux cleaned = 0.000306164 Jy ! Component: 450 - total flux cleaned = 0.000306234 Jy ! Component: 500 - total flux cleaned = 0.000320621 Jy ! Component: 550 - total flux cleaned = 0.00032749 Jy ! Component: 600 - total flux cleaned = 0.00034754 Jy ! Component: 650 - total flux cleaned = 0.000354032 Jy ! Component: 700 - total flux cleaned = 0.00036041 Jy ! Component: 750 - total flux cleaned = 0.000354601 Jy ! Component: 800 - total flux cleaned = 0.000360522 Jy ! Component: 850 - total flux cleaned = 0.000383035 Jy ! Component: 900 - total flux cleaned = 0.000405143 Jy ! Component: 950 - total flux cleaned = 0.000415982 Jy ! Component: 1000 - total flux cleaned = 0.000431832 Jy ! Component: 1050 - total flux cleaned = 0.00045244 Jy ! Component: 1100 - total flux cleaned = 0.000477501 Jy ! Component: 1150 - total flux cleaned = 0.000497088 Jy ! Component: 1200 - total flux cleaned = 0.000511529 Jy ! Component: 1250 - total flux cleaned = 0.0005352 Jy ! Component: 1300 - total flux cleaned = 0.000549085 Jy ! Component: 1350 - total flux cleaned = 0.0005536 Jy ! Component: 1400 - total flux cleaned = 0.000575902 Jy ! Component: 1450 - total flux cleaned = 0.000575824 Jy ! Component: 1500 - total flux cleaned = 0.000588722 Jy ! Component: 1550 - total flux cleaned = 0.000592824 Jy ! Component: 1600 - total flux cleaned = 0.00060539 Jy ! Component: 1650 - total flux cleaned = 0.000605361 Jy ! Component: 1700 - total flux cleaned = 0.000609418 Jy ! Component: 1750 - total flux cleaned = 0.000621444 Jy ! Component: 1800 - total flux cleaned = 0.000641 Jy ! Component: 1850 - total flux cleaned = 0.000629393 Jy ! Component: 1900 - total flux cleaned = 0.00064074 Jy ! Component: 1950 - total flux cleaned = 0.000640677 Jy ! Component: 2000 - total flux cleaned = 0.000629593 Jy ! Component: 2050 - total flux cleaned = 0.000614963 Jy ! Component: 2100 - total flux cleaned = 0.00061854 Jy ! Component: 2150 - total flux cleaned = 0.000597088 Jy ! Component: 2200 - total flux cleaned = 0.000590019 Jy ! Component: 2250 - total flux cleaned = 0.000590002 Jy ! Component: 2300 - total flux cleaned = 0.000583065 Jy ! Component: 2350 - total flux cleaned = 0.000586497 Jy ! Component: 2400 - total flux cleaned = 0.000576387 Jy ! Component: 2450 - total flux cleaned = 0.00057638 Jy ! Component: 2500 - total flux cleaned = 0.000566427 Jy ! Component: 2550 - total flux cleaned = 0.000550052 Jy ! Component: 2600 - total flux cleaned = 0.000559814 Jy ! Component: 2650 - total flux cleaned = 0.000556603 Jy ! Component: 2700 - total flux cleaned = 0.000553385 Jy ! Component: 2750 - total flux cleaned = 0.000553419 Jy ! Component: 2800 - total flux cleaned = 0.000556541 Jy ! Component: 2850 - total flux cleaned = 0.000547208 Jy ! Component: 2900 - total flux cleaned = 0.000553428 Jy ! Component: 2950 - total flux cleaned = 0.000541197 Jy ! Component: 3000 - total flux cleaned = 0.000547269 Jy ! Component: 3050 - total flux cleaned = 0.000553283 Jy ! Component: 3100 - total flux cleaned = 0.000553284 Jy ! Component: 3150 - total flux cleaned = 0.000553274 Jy ! Component: 3200 - total flux cleaned = 0.000553277 Jy ! Component: 3250 - total flux cleaned = 0.000550352 Jy ! Component: 3300 - total flux cleaned = 0.000559031 Jy ! Component: 3350 - total flux cleaned = 0.000553278 Jy ! Component: 3400 - total flux cleaned = 0.000550425 Jy ! Component: 3450 - total flux cleaned = 0.000544732 Jy ! Component: 3500 - total flux cleaned = 0.000539084 Jy ! Component: 3550 - total flux cleaned = 0.000536246 Jy ! Component: 3600 - total flux cleaned = 0.000516715 Jy ! Component: 3650 - total flux cleaned = 0.000505622 Jy ! Component: 3700 - total flux cleaned = 0.00049737 Jy ! Component: 3750 - total flux cleaned = 0.000494616 Jy ! Component: 3800 - total flux cleaned = 0.000483679 Jy ! Component: 3850 - total flux cleaned = 0.000467383 Jy ! Component: 3900 - total flux cleaned = 0.00046468 Jy ! Component: 3950 - total flux cleaned = 0.000456608 Jy ! Component: 4000 - total flux cleaned = 0.00044855 Jy ! Component: 4050 - total flux cleaned = 0.000435219 Jy ! Total flux subtracted in 4096 components = 0.000429908 Jy ! Clean residual min=-0.000150 max=0.000151 Jy/beam ! Clean residual mean=-0.000000 rms=0.000054 Jy/beam ! Combined flux in latest and established models = 0.0189465 Jy keep ! Adding 313 model components to the UV plane model. ! The established model now contains 386 components and 0.0189465 Jy ![Exited script file: /opt64/bin/pima_mupet_02.dfm] wmap /vlbi/vcs9/uvm//J1628-3343_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.359 x 6.475 at 5.346 degrees (North through East) ! Clean map min=-0.00047521 max=0.019383 Jy/beam ! Writing clean map to FITS file: /vlbi/vcs9/uvm//J1628-3343_X_a_map.fits wmodel /vlbi/vcs9/uvm//J1628-3343_X_a_map.mod ! Writing 386 model components to file: /vlbi/vcs9/uvm//J1628-3343_X_a_map.mod wobs /vlbi/vcs9/uvm//J1628-3343_X_a_uvs.fits ! Writing UV FITS file: /vlbi/vcs9/uvm//J1628-3343_X_a_uvs.fits wwins /vlbi/vcs9/uvm//J1628-3343_X_a_map.win ! wwins: Wrote 2 windows to /vlbi/vcs9/uvm//J1628-3343_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0193832 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 5.52338e-05 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.854872 0.854872 1.70974 3.41949 6.83897 13.6779 27.3559 54.7118 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0001 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.019 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 350.929 quit ! Quitting program ! Log file /vlbi/vcs9/uvm//J1628-3343_X_a_dfm.log closed on Tue Dec 26 22:45:23 2017