! Started logfile: /vlbi/vcs9/uvm//J1553-3118_X_a_dfm.log on Tue Dec 26 22:44:04 2017 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 7.39200 obs /vlbi/vcs9/uvm//J1553-3118_X_a_uvm.fits ! Reading UV FITS file: /vlbi/vcs9/uvm//J1553-3118_X_a_uvm.fits ! AN table 1: 93 integrations on 28 of 28 possible baselines. ! AN table 2: 94 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.898014 visibilities/baseline/integration-bin. ! Found source: J1553-3118 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 7.392e+09 3.2e+07 1 3.2e+07 ! 02 2 7.424e+09 3.2e+07 1 3.2e+07 ! 03 3 7.456e+09 3.2e+07 1 3.2e+07 ! 04 4 7.552e+09 3.2e+07 1 3.2e+07 ! 05 5 7.744e+09 3.2e+07 1 3.2e+07 ! 06 6 7.776e+09 3.2e+07 1 3.2e+07 ! 07 7 7.808e+09 3.2e+07 1 3.2e+07 ! 08 8 7.84e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 85 lines of history. ! ! Reading 37616 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 8 channels. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_02.dfm J1553-3118_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 60 float amp_soltime2 amp_soltime2 = 5 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.1 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_02.dvm version of 2017.12.26 === " ! === Difmap script: pima_mupet_02.dvm version of 2017.12.26 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.0759691 Jy startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.001634Jy sigma=17.716404 ! Fit after self-cal, rms=0.941369Jy sigma=16.595230 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. peakwin win_mult ! Inverting map and beam ! Estimated beam: bmin=0.8068 mas, bmaj=3.028 mas, bpa=-12.73 degrees ! Estimated noise=0.515595 mJy/beam. ! Added new window around map position (0, 0). flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0503911 Jy ! Component: 100 - total flux cleaned = 0.0588982 Jy ! Total flux subtracted in 100 components = 0.0588982 Jy ! Clean residual min=-0.002437 max=0.003924 Jy/beam ! Clean residual mean=0.000003 rms=0.000673 Jy/beam ! Combined flux in latest and established models = 0.0588982 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0588982 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.046620Jy sigma=0.687306 ! Fit after self-cal, rms=0.046619Jy sigma=0.687242 ! Inverting map print "============== Finished uniform weighting CLEAN ==============" ! ============== Finished uniform weighting CLEAN ============== ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.12 mas, bmaj=3.879 mas, bpa=-11.6 degrees ! Estimated noise=0.205952 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00784913 Jy ! Component: 100 - total flux cleaned = 0.0109748 Jy ! Component: 150 - total flux cleaned = 0.0122787 Jy ! Component: 200 - total flux cleaned = 0.0126028 Jy ! Total flux subtracted in 200 components = 0.0126028 Jy ! Clean residual min=-0.001982 max=0.002099 Jy/beam ! Clean residual mean=-0.000005 rms=0.000573 Jy/beam ! Combined flux in latest and established models = 0.071501 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 37 model components to the UV plane model. ! The established model now contains 43 components and 0.071501 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.046135Jy sigma=0.669187 ! Fit after self-cal, rms=0.046129Jy sigma=0.669113 ! Inverting map print "============== Finished natural weighting CLEAN ==============" ! ============== Finished natural weighting CLEAN ============== ! gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.96081 ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 HN 1.42 KP 0.92 LA 0.94 ! MK 1.06 NL 0.99 OV 0.97 PT 0.95 ! ! Amplitude normalization factor in sub-array 2: 0.983787 ! Telescope amplitude corrections in sub-array 2: ! FD 1.00 HN 1.05 KP 1.01 LA 1.01 ! NL 1.00 OV 1.03 PT 1.06 SC 0.96 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.960456 ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 HN 1.40 KP 0.92 LA 0.96 ! MK 1.01 NL 1.03 OV 0.98 PT 0.94 ! ! Amplitude normalization factor in sub-array 2: 0.977787 ! Telescope amplitude corrections in sub-array 2: ! FD 1.02 HN 1.07 KP 0.98 LA 1.03 ! NL 1.07 OV 1.06 PT 0.99 SC 0.96 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.989293 ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 HN 1.19 KP 0.94 LA 0.97 ! MK 1.05 NL 0.98 OV 0.98 PT 0.94 ! ! Amplitude normalization factor in sub-array 2: 0.970654 ! Telescope amplitude corrections in sub-array 2: ! FD 1.00 HN 1.09 KP 1.06 LA 1.00 ! NL 1.02 OV 1.06 PT 1.06 SC 0.95 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.97187 ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 HN 1.30 KP 0.93 LA 0.99 ! MK 1.02 NL 0.98 OV 0.96 PT 0.95 ! ! Amplitude normalization factor in sub-array 2: 0.969425 ! Telescope amplitude corrections in sub-array 2: ! FD 1.02 HN 1.06 KP 1.04 LA 1.00 ! NL 1.04 OV 1.06 PT 1.05 SC 0.98 ! ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.981498 ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 HN 1.28 KP 0.91 LA 0.97 ! MK 1.05 NL 1.00 OV 0.97 PT 0.92 ! ! Amplitude normalization factor in sub-array 2: 0.9754 ! Telescope amplitude corrections in sub-array 2: ! FD 1.06 HN 1.03 KP 0.98 LA 1.04 ! NL 1.05 OV 1.02 PT 1.05 SC 0.98 ! ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.975128 ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 HN 1.33 KP 0.92 LA 0.96 ! MK 1.03 NL 1.00 OV 0.98 PT 0.92 ! ! Amplitude normalization factor in sub-array 2: 0.977184 ! Telescope amplitude corrections in sub-array 2: ! FD 1.03 HN 1.08 KP 1.00 LA 1.02 ! NL 0.97 OV 1.07 PT 1.09 SC 0.93 ! ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.981117 ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 HN 1.26 KP 0.90 LA 0.97 ! MK 1.06 NL 1.05 OV 0.94 PT 0.94 ! ! Amplitude normalization factor in sub-array 2: 0.964216 ! Telescope amplitude corrections in sub-array 2: ! FD 1.05 HN 1.07 KP 1.06 LA 0.98 ! NL 1.08 OV 1.07 PT 1.04 SC 0.94 ! ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.982664 ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 HN 1.20 KP 0.96 LA 0.98 ! MK 0.98 NL 1.00 OV 1.00 PT 0.95 ! ! Amplitude normalization factor in sub-array 2: 0.965201 ! Telescope amplitude corrections in sub-array 2: ! FD 1.00 HN 1.11 KP 1.02 LA 1.02 ! NL 1.06 OV 1.06 PT 1.08 SC 0.94 ! ! ! Fit before self-cal, rms=0.046129Jy sigma=0.669113 ! Fit after self-cal, rms=0.048776Jy sigma=0.665462 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.048776Jy sigma=0.665462 ! Fit after self-cal, rms=0.048777Jy sigma=0.665457 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.14 mas, bmaj=3.894 mas, bpa=-11.25 degrees ! Estimated noise=0.195986 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00294487 Jy ! Component: 100 - total flux cleaned = -0.00374626 Jy ! Component: 150 - total flux cleaned = -0.00384726 Jy ! Component: 200 - total flux cleaned = -0.00389895 Jy ! Total flux subtracted in 200 components = -0.00389895 Jy ! Clean residual min=-0.000794 max=0.000921 Jy/beam ! Clean residual mean=-0.000002 rms=0.000226 Jy/beam ! Combined flux in latest and established models = 0.067602 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 61 components and 0.067602 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.048665Jy sigma=0.662435 ! Fit after self-cal, rms=0.048663Jy sigma=0.662421 ! Inverting map print "============== Finished amplitude gscale SELF-CAL ==============" ! ============== Finished amplitude gscale SELF-CAL ============== ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.048663Jy sigma=0.662421 ! Fit after self-cal, rms=0.048655Jy sigma=0.662108 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -8.47259e-06 Jy ! Component: 100 - total flux cleaned = -4.13255e-05 Jy ! Component: 150 - total flux cleaned = -5.12178e-05 Jy ! Component: 200 - total flux cleaned = -6.75395e-05 Jy ! Total flux subtracted in 200 components = -6.75395e-05 Jy ! Clean residual min=-0.000789 max=0.000873 Jy/beam ! Clean residual mean=-0.000002 rms=0.000223 Jy/beam ! Combined flux in latest and established models = 0.0675345 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 62 components and 0.0675345 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.048653Jy sigma=0.662027 ! Fit after self-cal, rms=0.048653Jy sigma=0.661973 ! Inverting map print "=== Finished natural weighting clean with shorter phase_soltime " ! === Finished natural weighting clean with shorter phase_soltime ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.14 x 3.894 at -11.25 degrees (North through East) ! Clean map min=-0.00074894 max=0.055945 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "============== Finished amplitude self-cal ==============" end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8155 mas, bmaj=3.01 mas, bpa=-12.65 degrees ! Estimated noise=0.505453 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0493981 Jy ! Component: 100 - total flux cleaned = 0.0572673 Jy ! Component: 150 - total flux cleaned = 0.0607663 Jy ! Component: 200 - total flux cleaned = 0.0629121 Jy ! Total flux subtracted in 200 components = 0.0629121 Jy ! Clean residual min=-0.001613 max=0.001791 Jy/beam ! Clean residual mean=0.000001 rms=0.000407 Jy/beam ! Combined flux in latest and established models = 0.0629121 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.0629121 Jy ! Inverting map and beam ! Estimated beam: bmin=1.14 mas, bmaj=3.894 mas, bpa=-11.25 degrees ! Estimated noise=0.195986 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00282068 Jy ! Component: 100 - total flux cleaned = 0.00388004 Jy ! Component: 150 - total flux cleaned = 0.00423751 Jy ! Component: 200 - total flux cleaned = 0.0042697 Jy ! Total flux subtracted in 200 components = 0.0042697 Jy ! Clean residual min=-0.000827 max=0.000912 Jy/beam ! Clean residual mean=-0.000001 rms=0.000230 Jy/beam ! Combined flux in latest and established models = 0.0671818 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 32 components and 0.0671818 Jy ! Inverting map clean ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 9.8189e-06 Jy ! Component: 100 - total flux cleaned = 2.79822e-05 Jy ! Component: 150 - total flux cleaned = 4.4791e-05 Jy ! Component: 200 - total flux cleaned = 5.28818e-05 Jy ! Total flux subtracted in 200 components = 5.28818e-05 Jy ! Clean residual min=-0.000818 max=0.000891 Jy/beam ! Clean residual mean=-0.000001 rms=0.000227 Jy/beam ! Combined flux in latest and established models = 0.0672347 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 32 components and 0.0672347 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.048657Jy sigma=0.662003 ! Fit after self-cal, rms=0.048656Jy sigma=0.661972 wmodel J1553-3118_X_map.mod ! Writing 32 model components to file: J1553-3118_X_map.mod wobs J1553-3118_X_uvs.fits ! Writing UV FITS file: J1553-3118_X_uvs.fits wwins J1553-3118_X_map.win ! wwins: Wrote 1 windows to J1553-3118_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000295056 Jy ! Component: 100 - total flux cleaned = 0.000338769 Jy ! Component: 150 - total flux cleaned = 0.000364304 Jy ! Component: 200 - total flux cleaned = 0.000351939 Jy ! Component: 250 - total flux cleaned = 0.000375033 Jy ! Component: 300 - total flux cleaned = 0.000440368 Jy ! Component: 350 - total flux cleaned = 0.000523826 Jy ! Component: 400 - total flux cleaned = 0.000623964 Jy ! Component: 450 - total flux cleaned = 0.000710904 Jy ! Component: 500 - total flux cleaned = 0.000794953 Jy ! Component: 550 - total flux cleaned = 0.000894155 Jy ! Component: 600 - total flux cleaned = 0.000963961 Jy ! Component: 650 - total flux cleaned = 0.00102349 Jy ! Component: 700 - total flux cleaned = 0.00109807 Jy ! Component: 750 - total flux cleaned = 0.00114631 Jy ! Component: 800 - total flux cleaned = 0.00119313 Jy ! Component: 850 - total flux cleaned = 0.00123114 Jy ! Component: 900 - total flux cleaned = 0.00126828 Jy ! Component: 950 - total flux cleaned = 0.00130446 Jy ! Component: 1000 - total flux cleaned = 0.00130439 Jy ! Component: 1050 - total flux cleaned = 0.001339 Jy ! Component: 1100 - total flux cleaned = 0.00137276 Jy ! Component: 1150 - total flux cleaned = 0.00138611 Jy ! Component: 1200 - total flux cleaned = 0.00143154 Jy ! Component: 1250 - total flux cleaned = 0.00143163 Jy ! Component: 1300 - total flux cleaned = 0.00146928 Jy ! Component: 1350 - total flux cleaned = 0.00148146 Jy ! Component: 1400 - total flux cleaned = 0.00151745 Jy ! Component: 1450 - total flux cleaned = 0.00151146 Jy ! Component: 1500 - total flux cleaned = 0.00154054 Jy ! Component: 1550 - total flux cleaned = 0.00155774 Jy ! Component: 1600 - total flux cleaned = 0.00156331 Jy ! Component: 1650 - total flux cleaned = 0.00156333 Jy ! Component: 1700 - total flux cleaned = 0.00157429 Jy ! Component: 1750 - total flux cleaned = 0.00159042 Jy ! Component: 1800 - total flux cleaned = 0.00162219 Jy ! Component: 1850 - total flux cleaned = 0.00162207 Jy ! Component: 1900 - total flux cleaned = 0.00164278 Jy ! Component: 1950 - total flux cleaned = 0.00165297 Jy ! Component: 2000 - total flux cleaned = 0.00168311 Jy ! Component: 2050 - total flux cleaned = 0.00168311 Jy ! Component: 2100 - total flux cleaned = 0.00170278 Jy ! Component: 2150 - total flux cleaned = 0.00170271 Jy ! Component: 2200 - total flux cleaned = 0.00171226 Jy ! Component: 2250 - total flux cleaned = 0.00171704 Jy ! Component: 2300 - total flux cleaned = 0.00171709 Jy ! Component: 2350 - total flux cleaned = 0.00172639 Jy ! Component: 2400 - total flux cleaned = 0.00171725 Jy ! Component: 2450 - total flux cleaned = 0.00171722 Jy ! Component: 2500 - total flux cleaned = 0.0017172 Jy ! Component: 2550 - total flux cleaned = 0.00172609 Jy ! Component: 2600 - total flux cleaned = 0.00171724 Jy ! Component: 2650 - total flux cleaned = 0.00171284 Jy ! Component: 2700 - total flux cleaned = 0.00171714 Jy ! Component: 2750 - total flux cleaned = 0.0017086 Jy ! Component: 2800 - total flux cleaned = 0.00170868 Jy ! Component: 2850 - total flux cleaned = 0.0017129 Jy ! Component: 2900 - total flux cleaned = 0.00171295 Jy ! Component: 2950 - total flux cleaned = 0.00170877 Jy ! Component: 3000 - total flux cleaned = 0.00170467 Jy ! Component: 3050 - total flux cleaned = 0.00169239 Jy ! Component: 3100 - total flux cleaned = 0.00169234 Jy ! Component: 3150 - total flux cleaned = 0.00170042 Jy ! Component: 3200 - total flux cleaned = 0.00170844 Jy ! Component: 3250 - total flux cleaned = 0.0017005 Jy ! Component: 3300 - total flux cleaned = 0.00172415 Jy ! Component: 3350 - total flux cleaned = 0.00171626 Jy ! Component: 3400 - total flux cleaned = 0.00172791 Jy ! Component: 3450 - total flux cleaned = 0.00173179 Jy ! Component: 3500 - total flux cleaned = 0.00173562 Jy ! Component: 3550 - total flux cleaned = 0.00173179 Jy ! Component: 3600 - total flux cleaned = 0.00173557 Jy ! Component: 3650 - total flux cleaned = 0.00173936 Jy ! Component: 3700 - total flux cleaned = 0.00173563 Jy ! Component: 3750 - total flux cleaned = 0.00173935 Jy ! Component: 3800 - total flux cleaned = 0.00173562 Jy ! Component: 3850 - total flux cleaned = 0.00175778 Jy ! Component: 3900 - total flux cleaned = 0.00176148 Jy ! Component: 3950 - total flux cleaned = 0.0017615 Jy ! Component: 4000 - total flux cleaned = 0.00177608 Jy ! Component: 4050 - total flux cleaned = 0.00178333 Jy ! Total flux subtracted in 4096 components = 0.00177611 Jy ! Clean residual min=-0.000203 max=0.000269 Jy/beam ! Clean residual mean=0.000000 rms=0.000064 Jy/beam ! Combined flux in latest and established models = 0.0690108 Jy keep ! Adding 299 model components to the UV plane model. ! The established model now contains 331 components and 0.0690108 Jy ![Exited script file: /opt64/bin/pima_mupet_02.dfm] wmap /vlbi/vcs9/uvm//J1553-3118_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.14 x 3.894 at -11.25 degrees (North through East) ! Clean map min=-0.00035718 max=0.056133 Jy/beam ! Writing clean map to FITS file: /vlbi/vcs9/uvm//J1553-3118_X_a_map.fits wmodel /vlbi/vcs9/uvm//J1553-3118_X_a_map.mod ! Writing 331 model components to file: /vlbi/vcs9/uvm//J1553-3118_X_a_map.mod wobs /vlbi/vcs9/uvm//J1553-3118_X_a_uvs.fits ! Writing UV FITS file: /vlbi/vcs9/uvm//J1553-3118_X_a_uvs.fits wwins /vlbi/vcs9/uvm//J1553-3118_X_a_map.win ! wwins: Wrote 2 windows to /vlbi/vcs9/uvm//J1553-3118_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0561335 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 6.25425e-05 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.334252 0.334252 0.668505 1.33701 2.67402 5.34804 10.6961 21.3922 42.7843 85.5686 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0001 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.056 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 897.525 quit ! Quitting program ! Log file /vlbi/vcs9/uvm//J1553-3118_X_a_dfm.log closed on Tue Dec 26 22:44:08 2017