! Started logfile: /vlbi/vcs9/uvm//J1513-3720_C_a_dfm.log on Tue Dec 26 22:41:58 2017
float field_size
field_size =  1024
float field_cell
field_cell =   0.3000
float taper_size
taper_size =   40.0
float freq
freq       =    4.12800
obs     /vlbi/vcs9/uvm//J1513-3720_C_a_uvm.fits
! Reading UV FITS file: /vlbi/vcs9/uvm//J1513-3720_C_a_uvm.fits
! AN table 1: 93 integrations on 10 of 10 possible baselines.
! AN table 2: 95 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.976602 visibilities/baseline/integration-bin.
! Found source: J1513-3720
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 85 lines of history.
! 
! Reading 28048 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/opt64/bin/pima_mupet_02.dfm J1513-3720_C]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 60
float amp_soltime2
amp_soltime2 = 5
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.1
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_02.dvm version of 2017.12.26 === "
! === Difmap script: pima_mupet_02.dvm version of 2017.12.26 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.0405077 Jy 
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  A total of 6 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  A total of 6 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  A total of 6 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  A total of 6 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 5.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  A total of 6 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 6.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  A total of 6 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 7.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  A total of 6 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 8.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  A total of 6 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.000411Jy  sigma=19.874889
! Fit after  self-cal, rms=0.981779Jy  sigma=19.516296
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
peakwin win_mult
! Inverting map and beam 
! Estimated beam: bmin=1.141 mas, bmaj=3.642 mas, bpa=-15.77 degrees
! Estimated noise=0.561689 mJy/beam.
! Added new window around map position (0, 0).
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0164704 Jy
! Component: 100  -  total flux cleaned = 0.0184866 Jy
! Total flux subtracted in 100 components = 0.0184866 Jy
! Clean residual min=-0.002280 max=0.002526 Jy/beam
! Clean residual mean=-0.000001 rms=0.000489 Jy/beam
! Combined flux in latest and established models = 0.0184866 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.0184866 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.035808Jy  sigma=0.674714
! Fit after  self-cal, rms=0.035802Jy  sigma=0.674551
! Inverting map 
print "============== Finished uniform weighting CLEAN =============="
! ============== Finished uniform weighting CLEAN ============== 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.624 mas, bmaj=4.563 mas, bpa=-12.85 degrees
! Estimated noise=0.212648 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000229985 Jy
! Component: 100  -  total flux cleaned = 0.000217986 Jy
! Component: 150  -  total flux cleaned = 0.000217256 Jy
! Component: 200  -  total flux cleaned = 0.000205659 Jy
! Total flux subtracted in 200 components = 0.000205659 Jy
! Clean residual min=-0.001527 max=0.001663 Jy/beam
! Clean residual mean=-0.000003 rms=0.000387 Jy/beam
! Combined flux in latest and established models = 0.0186922 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 8 model components to the UV plane model.
! The established model now contains 18 components and 0.0186922 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.035790Jy  sigma=0.674420
! Fit after  self-cal, rms=0.035789Jy  sigma=0.674404
! Inverting map 
print "============== Finished natural weighting CLEAN =============="
! ============== Finished natural weighting CLEAN ============== 
! 
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 1.20357
!  Telescope amplitude corrections in sub-array 1:
!   KP        0.89     LA        0.72     MK        0.91     NL        0.73     
!   PT        0.91     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.993308
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.83     KP        0.82     LA        0.97     MK        1.23     
!   NL        0.94     OV        1.15     PT        1.10     SC        1.01     
! 
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 1.12806
!  Telescope amplitude corrections in sub-array 1:
!   KP        1.05     LA        0.77     MK        0.91     NL        0.68     
!   PT        1.02     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 1.00865
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.99     KP        0.68     LA        0.99     MK        0.96     
!   NL        1.06     OV        0.97     PT        1.24     SC        1.03     
! 
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 1.11038
!  Telescope amplitude corrections in sub-array 1:
!   KP        1.14     LA        0.73     MK        0.96     NL        0.70     
!   PT        0.98     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.969836
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.05     KP        0.78     LA        0.87     MK        1.11     
!   NL        1.11     OV        1.17     PT        1.31     SC        0.84     
! 
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 1.09739
!  Telescope amplitude corrections in sub-array 1:
!   KP        1.20     LA        0.78     MK        0.79     NL        0.85     
!   PT        0.94     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.954666
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.11     KP        0.91     LA        1.04     MK        1.05     
!   NL        1.24     OV        1.13     PT        1.12     SC        0.77     
! 
! 
! Correcting IF 5.
!  Amplitude normalization factor in sub-array 1: 1.13576
!  Telescope amplitude corrections in sub-array 1:
!   KP        0.95     LA        0.81     MK        0.94     NL        0.73     
!   PT        0.98     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.934095
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.15     KP        0.77     LA        1.05     MK        1.20     
!   NL        1.03     OV        1.20     PT        1.21     SC        0.95     
! 
! 
! Correcting IF 6.
!  Amplitude normalization factor in sub-array 1: 1.06535
!  Telescope amplitude corrections in sub-array 1:
!   KP        1.06     LA        0.79     MK        1.11     NL        0.76     
!   PT        0.97     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.87727
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.26     KP        0.91     LA        1.01     MK        1.20     
!   NL        1.16     OV        1.32     PT        1.35     SC        0.91     
! 
! 
! Correcting IF 7.
!  Amplitude normalization factor in sub-array 1: 1.09428
!  Telescope amplitude corrections in sub-array 1:
!   KP        0.99     LA        0.84     MK        0.94     NL        0.81     
!   PT        0.99     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.898949
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.37     KP        0.84     LA        0.96     MK        1.02     
!   NL        1.11     OV        1.26     PT        1.27     SC        1.08     
! 
! 
! Correcting IF 8.
!  Amplitude normalization factor in sub-array 1: 1.12125
!  Telescope amplitude corrections in sub-array 1:
!   KP        0.92     LA        0.84     MK        0.93     NL        0.84     
!   PT        0.94     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.887994
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.09     KP        0.74     LA        0.94     MK        1.08     
!   NL        1.27     OV        1.36     PT        1.52     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.035789Jy  sigma=0.674404
! Fit after  self-cal, rms=0.035063Jy  sigma=0.671242
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.035063Jy  sigma=0.671242
! Fit after  self-cal, rms=0.035065Jy  sigma=0.671213
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.609 mas, bmaj=4.433 mas, bpa=-9.569 degrees
! Estimated noise=0.199578 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000568432 Jy
! Component: 100  -  total flux cleaned = -0.000597168 Jy
! Component: 150  -  total flux cleaned = -0.000614733 Jy
! Component: 200  -  total flux cleaned = -0.000625545 Jy
! Total flux subtracted in 200 components = -0.000625545 Jy
! Clean residual min=-0.000907 max=0.001296 Jy/beam
! Clean residual mean=-0.000002 rms=0.000267 Jy/beam
! Combined flux in latest and established models = 0.0180667 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 12 model components to the UV plane model.
! The established model now contains 26 components and 0.0180667 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.035048Jy  sigma=0.670699
! Fit after  self-cal, rms=0.035047Jy  sigma=0.670686
! Inverting map 
print "============== Finished amplitude gscale SELF-CAL =============="
! ============== Finished amplitude gscale SELF-CAL ============== 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.035047Jy  sigma=0.670686
! Fit after  self-cal, rms=0.035020Jy  sigma=0.669712
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (16.5, -50.7).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00135011 Jy
! Component: 100  -  total flux cleaned = 0.00145711 Jy
! Component: 150  -  total flux cleaned = 0.00147667 Jy
! Component: 200  -  total flux cleaned = 0.00150356 Jy
! Total flux subtracted in 200 components = 0.00150356 Jy
! Clean residual min=-0.000740 max=0.000866 Jy/beam
! Clean residual mean=-0.000002 rms=0.000214 Jy/beam
! Combined flux in latest and established models = 0.0195702 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 28 model components to the UV plane model.
! The established model now contains 52 components and 0.0195702 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.034978Jy  sigma=0.668763
! Fit after  self-cal, rms=0.034975Jy  sigma=0.668634
! Inverting map 
print "=== Finished natural weighting clean with shorter phase_soltime "
! === Finished natural weighting clean with shorter phase_soltime  
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.609 x 4.433 at -9.569 degrees (North through East)
! Clean map  min=-0.00069255  max=0.017575 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "============== Finished amplitude self-cal =============="
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.138 mas, bmaj=3.583 mas, bpa=-14.65 degrees
! Estimated noise=0.538791 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0158065 Jy
! Component: 100  -  total flux cleaned = 0.0186385 Jy
! Component: 150  -  total flux cleaned = 0.0196809 Jy
! Component: 200  -  total flux cleaned = 0.0199974 Jy
! Total flux subtracted in 200 components = 0.0199974 Jy
! Clean residual min=-0.001719 max=0.002048 Jy/beam
! Clean residual mean=-0.000001 rms=0.000399 Jy/beam
! Combined flux in latest and established models = 0.0199974 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 26 model components to the UV plane model.
! The established model now contains 26 components and 0.0199974 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.609 mas, bmaj=4.433 mas, bpa=-9.569 degrees
! Estimated noise=0.199578 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000220671 Jy
! Component: 100  -  total flux cleaned = -0.000200306 Jy
! Component: 150  -  total flux cleaned = -0.000185204 Jy
! Component: 200  -  total flux cleaned = -0.000172062 Jy
! Total flux subtracted in 200 components = -0.000172062 Jy
! Clean residual min=-0.000731 max=0.000791 Jy/beam
! Clean residual mean=-0.000003 rms=0.000211 Jy/beam
! Combined flux in latest and established models = 0.0198254 Jy
! Adding 18 model components to the UV plane model.
! The established model now contains 44 components and 0.0198253 Jy
! Inverting map 
clean
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 3.82898e-07 Jy
! Component: 100  -  total flux cleaned = 1.1898e-05 Jy
! Component: 150  -  total flux cleaned = 2.2032e-05 Jy
! Component: 200  -  total flux cleaned = 3.1638e-05 Jy
! Total flux subtracted in 200 components = 3.1638e-05 Jy
! Clean residual min=-0.000722 max=0.000773 Jy/beam
! Clean residual mean=-0.000003 rms=0.000208 Jy/beam
! Combined flux in latest and established models = 0.019857 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 21 model components to the UV plane model.
! The established model now contains 56 components and 0.019857 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.034973Jy  sigma=0.668573
! Fit after  self-cal, rms=0.034972Jy  sigma=0.668558
wmodel J1513-3720_C_map.mod
! Writing 56 model components to file: J1513-3720_C_map.mod
wobs   J1513-3720_C_uvs.fits
! Writing UV FITS file: J1513-3720_C_uvs.fits
wwins  J1513-3720_C_map.win
! wwins: Wrote 2 windows to J1513-3720_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00019594 Jy
! Component: 100  -  total flux cleaned = 0.000260342 Jy
! Component: 150  -  total flux cleaned = 0.000284846 Jy
! Component: 200  -  total flux cleaned = 0.000273338 Jy
! Component: 250  -  total flux cleaned = 0.000229698 Jy
! Component: 300  -  total flux cleaned = 0.00022981 Jy
! Component: 350  -  total flux cleaned = 0.000239941 Jy
! Component: 400  -  total flux cleaned = 0.000259601 Jy
! Component: 450  -  total flux cleaned = 0.000250187 Jy
! Component: 500  -  total flux cleaned = 0.000231531 Jy
! Component: 550  -  total flux cleaned = 0.000169349 Jy
! Component: 600  -  total flux cleaned = 0.000108934 Jy
! Component: 650  -  total flux cleaned = 5.00803e-05 Jy
! Component: 700  -  total flux cleaned = 1.72859e-05 Jy
! Component: 750  -  total flux cleaned = 1.11621e-06 Jy
! Component: 800  -  total flux cleaned = -1.43888e-05 Jy
! Component: 850  -  total flux cleaned = -2.20003e-05 Jy
! Component: 900  -  total flux cleaned = -1.44207e-05 Jy
! Component: 950  -  total flux cleaned = 7.63028e-06 Jy
! Component: 1000  -  total flux cleaned = 3.18134e-07 Jy
! Component: 1050  -  total flux cleaned = 2.943e-07 Jy
! Component: 1100  -  total flux cleaned = 7.40104e-06 Jy
! Component: 1150  -  total flux cleaned = 5.52793e-05 Jy
! Component: 1200  -  total flux cleaned = 7.53261e-05 Jy
! Component: 1250  -  total flux cleaned = 0.000121521 Jy
! Component: 1300  -  total flux cleaned = 0.000153862 Jy
! Component: 1350  -  total flux cleaned = 0.000160256 Jy
! Component: 1400  -  total flux cleaned = 0.000185567 Jy
! Component: 1450  -  total flux cleaned = 0.000210447 Jy
! Component: 1500  -  total flux cleaned = 0.000240829 Jy
! Component: 1550  -  total flux cleaned = 0.00024672 Jy
! Component: 1600  -  total flux cleaned = 0.0002705 Jy
! Component: 1650  -  total flux cleaned = 0.000293865 Jy
! Component: 1700  -  total flux cleaned = 0.000299542 Jy
! Component: 1750  -  total flux cleaned = 0.00032231 Jy
! Component: 1800  -  total flux cleaned = 0.000316804 Jy
! Component: 1850  -  total flux cleaned = 0.000339091 Jy
! Component: 1900  -  total flux cleaned = 0.000350024 Jy
! Component: 1950  -  total flux cleaned = 0.000366272 Jy
! Component: 2000  -  total flux cleaned = 0.000393017 Jy
! Component: 2050  -  total flux cleaned = 0.000398196 Jy
! Component: 2100  -  total flux cleaned = 0.000413873 Jy
! Component: 2150  -  total flux cleaned = 0.000429426 Jy
! Component: 2200  -  total flux cleaned = 0.000439578 Jy
! Component: 2250  -  total flux cleaned = 0.0004396 Jy
! Component: 2300  -  total flux cleaned = 0.000464614 Jy
! Component: 2350  -  total flux cleaned = 0.000479473 Jy
! Component: 2400  -  total flux cleaned = 0.0004747 Jy
! Component: 2450  -  total flux cleaned = 0.000503642 Jy
! Component: 2500  -  total flux cleaned = 0.000527462 Jy
! Component: 2550  -  total flux cleaned = 0.000532142 Jy
! Component: 2600  -  total flux cleaned = 0.000564779 Jy
! Component: 2650  -  total flux cleaned = 0.000583177 Jy
! Component: 2700  -  total flux cleaned = 0.00058775 Jy
! Component: 2750  -  total flux cleaned = 0.000605867 Jy
! Component: 2800  -  total flux cleaned = 0.000632731 Jy
! Component: 2850  -  total flux cleaned = 0.000650426 Jy
! Component: 2900  -  total flux cleaned = 0.000672357 Jy
! Component: 2950  -  total flux cleaned = 0.000681011 Jy
! Component: 3000  -  total flux cleaned = 0.000711165 Jy
! Component: 3050  -  total flux cleaned = 0.000715389 Jy
! Component: 3100  -  total flux cleaned = 0.000740759 Jy
! Component: 3150  -  total flux cleaned = 0.000736579 Jy
! Component: 3200  -  total flux cleaned = 0.000753231 Jy
! Component: 3250  -  total flux cleaned = 0.000769722 Jy
! Component: 3300  -  total flux cleaned = 0.000781978 Jy
! Component: 3350  -  total flux cleaned = 0.000773827 Jy
! Component: 3400  -  total flux cleaned = 0.000773845 Jy
! Component: 3450  -  total flux cleaned = 0.00079385 Jy
! Component: 3500  -  total flux cleaned = 0.000797769 Jy
! Component: 3550  -  total flux cleaned = 0.000805655 Jy
! Component: 3600  -  total flux cleaned = 0.000809573 Jy
! Component: 3650  -  total flux cleaned = 0.000821214 Jy
! Component: 3700  -  total flux cleaned = 0.000832764 Jy
! Component: 3750  -  total flux cleaned = 0.000832743 Jy
! Component: 3800  -  total flux cleaned = 0.000851769 Jy
! Component: 3850  -  total flux cleaned = 0.00085556 Jy
! Component: 3900  -  total flux cleaned = 0.000881836 Jy
! Component: 3950  -  total flux cleaned = 0.000881826 Jy
! Component: 4000  -  total flux cleaned = 0.000904079 Jy
! Component: 4050  -  total flux cleaned = 0.00090038 Jy
! Total flux subtracted in 4096 components = 0.000915068 Jy
! Clean residual min=-0.000208 max=0.000210 Jy/beam
! Clean residual mean=-0.000002 rms=0.000071 Jy/beam
! Combined flux in latest and established models = 0.0207721 Jy
keep
! Adding 253 model components to the UV plane model.
! The established model now contains 309 components and 0.0207721 Jy
![Exited script file: /opt64/bin/pima_mupet_02.dfm]
wmap   /vlbi/vcs9/uvm//J1513-3720_C_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.609 x 4.433 at -9.569 degrees (North through East)
! Clean map  min=-0.00068212  max=0.017214 Jy/beam
! Writing clean map to FITS file: /vlbi/vcs9/uvm//J1513-3720_C_a_map.fits
wmodel /vlbi/vcs9/uvm//J1513-3720_C_a_map.mod
! Writing 309 model components to file: /vlbi/vcs9/uvm//J1513-3720_C_a_map.mod
wobs   /vlbi/vcs9/uvm//J1513-3720_C_a_uvs.fits
! Writing UV FITS file: /vlbi/vcs9/uvm//J1513-3720_C_a_uvs.fits
wwins  /vlbi/vcs9/uvm//J1513-3720_C_a_map.win
! wwins: Wrote 3 windows to /vlbi/vcs9/uvm//J1513-3720_C_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0172139 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 6.78385e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.18227 1.18227 2.36455 4.7291 9.4582 18.9164 37.8328 75.6656
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0002 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.017 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  253.748 
quit
! Quitting program
! Log file /vlbi/vcs9/uvm//J1513-3720_C_a_dfm.log closed on Tue Dec 26 22:42:02 2017