! Started logfile: /vlbi/vcs9/uvm//J1512-2255_X_a_dfm.log on Tue Dec 26 22:41:40 2017 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 7.39200 obs /vlbi/vcs9/uvm//J1512-2255_X_a_uvm.fits ! Reading UV FITS file: /vlbi/vcs9/uvm//J1512-2255_X_a_uvm.fits ! AN table 1: 98 integrations on 28 of 28 possible baselines. ! AN table 2: 96 integrations on 15 of 15 possible baselines. ! Apparent sampling: 0.972275 visibilities/baseline/integration-bin. ! Found source: J1512-2255 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 7.392e+09 3.2e+07 1 3.2e+07 ! 02 2 7.424e+09 3.2e+07 1 3.2e+07 ! 03 3 7.456e+09 3.2e+07 1 3.2e+07 ! 04 4 7.552e+09 3.2e+07 1 3.2e+07 ! 05 5 7.744e+09 3.2e+07 1 3.2e+07 ! 06 6 7.776e+09 3.2e+07 1 3.2e+07 ! 07 7 7.808e+09 3.2e+07 1 3.2e+07 ! 08 8 7.84e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 94 lines of history. ! ! Reading 32544 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 8 channels. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_02.dfm J1512-2255_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 60 float amp_soltime2 amp_soltime2 = 5 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.1 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_02.dvm version of 2017.12.26 === " ! === Difmap script: pima_mupet_02.dvm version of 2017.12.26 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.0388143 Jy startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 15 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 15 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 15 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 15 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 15 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 15 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 15 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 15 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.000775Jy sigma=22.168909 ! Fit after self-cal, rms=0.984619Jy sigma=21.838215 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. peakwin win_mult ! Inverting map and beam ! Estimated beam: bmin=0.8844 mas, bmaj=3.819 mas, bpa=10.63 degrees ! Estimated noise=0.455409 mJy/beam. ! Added new window around map position (0, 0). flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0131453 Jy ! Component: 100 - total flux cleaned = 0.0150343 Jy ! Total flux subtracted in 100 components = 0.0150343 Jy ! Clean residual min=-0.001502 max=0.001329 Jy/beam ! Clean residual mean=0.000001 rms=0.000363 Jy/beam ! Combined flux in latest and established models = 0.0150343 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0150343 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.035364Jy sigma=0.655307 ! Fit after self-cal, rms=0.035355Jy sigma=0.655042 ! Inverting map print "============== Finished uniform weighting CLEAN ==============" ! ============== Finished uniform weighting CLEAN ============== ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.199 mas, bmaj=4.419 mas, bpa=9.431 degrees ! Estimated noise=0.176934 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -9.64328e-06 Jy ! Component: 100 - total flux cleaned = -2.29692e-05 Jy ! Component: 150 - total flux cleaned = -3.49847e-05 Jy ! Component: 200 - total flux cleaned = -4.11446e-05 Jy ! Total flux subtracted in 200 components = -4.11446e-05 Jy ! Clean residual min=-0.000918 max=0.000948 Jy/beam ! Clean residual mean=0.000002 rms=0.000227 Jy/beam ! Combined flux in latest and established models = 0.0149931 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 21 components and 0.0149931 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.035352Jy sigma=0.654998 ! Fit after self-cal, rms=0.035352Jy sigma=0.654983 ! Inverting map print "============== Finished natural weighting CLEAN ==============" ! ============== Finished natural weighting CLEAN ============== ! gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.921802 ! Telescope amplitude corrections in sub-array 1: ! FD 0.98 HN 1.10 KP 1.06 LA 1.09 ! NL 1.15 OV 0.90 PT 1.12 SC 1.28 ! ! Amplitude normalization factor in sub-array 2: 1.09517 ! Telescope amplitude corrections in sub-array 2: ! FD 0.81 LA 0.96 NL 0.93 OV 0.65 ! PT 1.15 SC 0.98 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.898642 ! Telescope amplitude corrections in sub-array 1: ! FD 1.11 HN 1.05 KP 1.01 LA 1.19 ! NL 1.13 OV 1.07 PT 1.22 SC 1.12 ! ! Amplitude normalization factor in sub-array 2: 1.11124 ! Telescope amplitude corrections in sub-array 2: ! FD 0.97 LA 0.95 NL 0.86 OV 0.70 ! PT 1.01 SC 0.91 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.884004 ! Telescope amplitude corrections in sub-array 1: ! FD 1.04 HN 1.00 KP 0.89 LA 1.43 ! NL 1.05 OV 0.99 PT 1.31 SC 1.35 ! ! Amplitude normalization factor in sub-array 2: 1.10137 ! Telescope amplitude corrections in sub-array 2: ! FD 0.80 LA 1.03 NL 0.95 OV 0.64 ! PT 0.97 SC 1.05 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.946538 ! Telescope amplitude corrections in sub-array 1: ! FD 1.04 HN 1.14 KP 0.95 LA 1.08 ! NL 1.04 OV 1.09 PT 1.22 SC 0.90 ! ! Amplitude normalization factor in sub-array 2: 1.13293 ! Telescope amplitude corrections in sub-array 2: ! FD 0.80 LA 0.92 NL 1.02 OV 0.57 ! PT 0.95 SC 1.03 ! ! ! Correcting IF 5. ! Amplitude normalization factor in sub-array 1: 1.00274 ! Telescope amplitude corrections in sub-array 1: ! FD 1.06 HN 0.95 KP 0.97 LA 1.00 ! NL 0.92 OV 0.94 PT 1.18 SC 0.97 ! ! Amplitude normalization factor in sub-array 2: 1.14558 ! Telescope amplitude corrections in sub-array 2: ! FD 0.96 LA 0.94 NL 0.83 OV 0.61 ! PT 1.09 SC 0.81 ! ! ! Correcting IF 6. ! Amplitude normalization factor in sub-array 1: 0.941222 ! Telescope amplitude corrections in sub-array 1: ! FD 1.18 HN 0.93 KP 1.03 LA 1.23 ! NL 0.84 OV 0.94 PT 1.26 SC 1.09 ! ! Amplitude normalization factor in sub-array 2: 1.11621 ! Telescope amplitude corrections in sub-array 2: ! FD 0.90 LA 0.93 NL 0.86 OV 0.63 ! PT 1.10 SC 0.96 ! ! ! Correcting IF 7. ! Amplitude normalization factor in sub-array 1: 1.01591 ! Telescope amplitude corrections in sub-array 1: ! FD 0.99 HN 0.79 KP 0.86 LA 1.04 ! NL 1.20 OV 0.84 PT 1.15 SC 1.00 ! ! Amplitude normalization factor in sub-array 2: 1.1621 ! Telescope amplitude corrections in sub-array 2: ! FD 0.77 LA 0.94 NL 0.96 OV 0.60 ! PT 0.89 SC 1.00 ! ! ! Correcting IF 8. ! Amplitude normalization factor in sub-array 1: 0.948791 ! Telescope amplitude corrections in sub-array 1: ! FD 0.97 HN 0.80 KP 1.09 LA 1.13 ! NL 1.25 OV 1.03 PT 1.16 SC 1.00 ! ! Amplitude normalization factor in sub-array 2: 1.12293 ! Telescope amplitude corrections in sub-array 2: ! FD 0.96 LA 1.07 NL 0.94 OV 0.56 ! PT 0.94 SC 0.88 ! ! ! Fit before self-cal, rms=0.035352Jy sigma=0.654983 ! Fit after self-cal, rms=0.033773Jy sigma=0.653147 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.033773Jy sigma=0.653147 ! Fit after self-cal, rms=0.033773Jy sigma=0.653126 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.2 mas, bmaj=4.325 mas, bpa=8.117 degrees ! Estimated noise=0.17213 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000189024 Jy ! Component: 100 - total flux cleaned = -0.00017872 Jy ! Component: 150 - total flux cleaned = -0.000171342 Jy ! Component: 200 - total flux cleaned = -0.000171973 Jy ! Total flux subtracted in 200 components = -0.000171973 Jy ! Clean residual min=-0.000684 max=0.000900 Jy/beam ! Clean residual mean=-0.000004 rms=0.000215 Jy/beam ! Combined flux in latest and established models = 0.0148211 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 46 components and 0.0148211 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.033771Jy sigma=0.653004 ! Fit after self-cal, rms=0.033771Jy sigma=0.652989 ! Inverting map print "============== Finished amplitude gscale SELF-CAL ==============" ! ============== Finished amplitude gscale SELF-CAL ============== ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.033771Jy sigma=0.652989 ! Fit after self-cal, rms=0.033729Jy sigma=0.651683 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000129919 Jy ! Component: 100 - total flux cleaned = 0.000147178 Jy ! Component: 150 - total flux cleaned = 0.000143508 Jy ! Component: 200 - total flux cleaned = 0.000140156 Jy ! Total flux subtracted in 200 components = 0.000140156 Jy ! Clean residual min=-0.000669 max=0.000903 Jy/beam ! Clean residual mean=-0.000004 rms=0.000212 Jy/beam ! Combined flux in latest and established models = 0.0149613 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 57 components and 0.0149613 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.033724Jy sigma=0.651661 ! Fit after self-cal, rms=0.033722Jy sigma=0.651528 ! Inverting map print "=== Finished natural weighting clean with shorter phase_soltime " ! === Finished natural weighting clean with shorter phase_soltime ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.2 x 4.325 at 8.117 degrees (North through East) ! Clean map min=-0.00064287 max=0.015095 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "============== Finished amplitude self-cal ==============" end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.883 mas, bmaj=3.76 mas, bpa=10 degrees ! Estimated noise=0.443327 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0129141 Jy ! Component: 100 - total flux cleaned = 0.0149576 Jy ! Component: 150 - total flux cleaned = 0.0155131 Jy ! Component: 200 - total flux cleaned = 0.0155453 Jy ! Total flux subtracted in 200 components = 0.0155453 Jy ! Clean residual min=-0.001096 max=0.001275 Jy/beam ! Clean residual mean=-0.000002 rms=0.000284 Jy/beam ! Combined flux in latest and established models = 0.0155453 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.0155453 Jy ! Inverting map and beam ! Estimated beam: bmin=1.2 mas, bmaj=4.325 mas, bpa=8.117 degrees ! Estimated noise=0.17213 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000381988 Jy ! Component: 100 - total flux cleaned = -0.000447669 Jy ! Component: 150 - total flux cleaned = -0.000488516 Jy ! Component: 200 - total flux cleaned = -0.000508206 Jy ! Total flux subtracted in 200 components = -0.000508206 Jy ! Clean residual min=-0.000681 max=0.000888 Jy/beam ! Clean residual mean=-0.000004 rms=0.000214 Jy/beam ! Combined flux in latest and established models = 0.0150371 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 37 components and 0.0150371 Jy ! Inverting map clean ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -6.25306e-06 Jy ! Component: 100 - total flux cleaned = -1.73657e-05 Jy ! Component: 150 - total flux cleaned = -2.77482e-05 Jy ! Component: 200 - total flux cleaned = -3.71552e-05 Jy ! Total flux subtracted in 200 components = -3.71552e-05 Jy ! Clean residual min=-0.000679 max=0.000892 Jy/beam ! Clean residual mean=-0.000004 rms=0.000213 Jy/beam ! Combined flux in latest and established models = 0.015 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 38 components and 0.015 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.033722Jy sigma=0.651546 ! Fit after self-cal, rms=0.033722Jy sigma=0.651522 wmodel J1512-2255_X_map.mod ! Writing 38 model components to file: J1512-2255_X_map.mod wobs J1512-2255_X_uvs.fits ! Writing UV FITS file: J1512-2255_X_uvs.fits wwins J1512-2255_X_map.win ! wwins: Wrote 1 windows to J1512-2255_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000402734 Jy ! Component: 100 - total flux cleaned = 0.000750897 Jy ! Component: 150 - total flux cleaned = 0.000987574 Jy ! Component: 200 - total flux cleaned = 0.00110215 Jy ! Component: 250 - total flux cleaned = 0.00115566 Jy ! Component: 300 - total flux cleaned = 0.00122735 Jy ! Component: 350 - total flux cleaned = 0.00130523 Jy ! Component: 400 - total flux cleaned = 0.00136107 Jy ! Component: 450 - total flux cleaned = 0.00142393 Jy ! Component: 500 - total flux cleaned = 0.0014929 Jy ! Component: 550 - total flux cleaned = 0.00153439 Jy ! Component: 600 - total flux cleaned = 0.00158231 Jy ! Component: 650 - total flux cleaned = 0.00161298 Jy ! Component: 700 - total flux cleaned = 0.00162782 Jy ! Component: 750 - total flux cleaned = 0.00164933 Jy ! Component: 800 - total flux cleaned = 0.00165638 Jy ! Component: 850 - total flux cleaned = 0.00168354 Jy ! Component: 900 - total flux cleaned = 0.00170975 Jy ! Component: 950 - total flux cleaned = 0.00172872 Jy ! Component: 1000 - total flux cleaned = 0.00174734 Jy ! Component: 1050 - total flux cleaned = 0.00178969 Jy ! Component: 1100 - total flux cleaned = 0.00179551 Jy ! Component: 1150 - total flux cleaned = 0.00181289 Jy ! Component: 1200 - total flux cleaned = 0.00184116 Jy ! Component: 1250 - total flux cleaned = 0.0018577 Jy ! Component: 1300 - total flux cleaned = 0.00187398 Jy ! Component: 1350 - total flux cleaned = 0.00189508 Jy ! Component: 1400 - total flux cleaned = 0.00190539 Jy ! Component: 1450 - total flux cleaned = 0.00193072 Jy ! Component: 1500 - total flux cleaned = 0.00193079 Jy ! Component: 1550 - total flux cleaned = 0.00194549 Jy ! Component: 1600 - total flux cleaned = 0.00195508 Jy ! Component: 1650 - total flux cleaned = 0.00196442 Jy ! Component: 1700 - total flux cleaned = 0.00196902 Jy ! Component: 1750 - total flux cleaned = 0.00198261 Jy ! Component: 1800 - total flux cleaned = 0.00200496 Jy ! Component: 1850 - total flux cleaned = 0.00200935 Jy ! Component: 1900 - total flux cleaned = 0.00201817 Jy ! Component: 1950 - total flux cleaned = 0.00204834 Jy ! Component: 2000 - total flux cleaned = 0.00205687 Jy ! Component: 2050 - total flux cleaned = 0.00206527 Jy ! Component: 2100 - total flux cleaned = 0.00207774 Jy ! Component: 2150 - total flux cleaned = 0.00209009 Jy ! Component: 2200 - total flux cleaned = 0.00210225 Jy ! Component: 2250 - total flux cleaned = 0.00211029 Jy ! Component: 2300 - total flux cleaned = 0.00212618 Jy ! Component: 2350 - total flux cleaned = 0.00213017 Jy ! Component: 2400 - total flux cleaned = 0.00214184 Jy ! Component: 2450 - total flux cleaned = 0.00216118 Jy ! Component: 2500 - total flux cleaned = 0.00217264 Jy ! Component: 2550 - total flux cleaned = 0.00218024 Jy ! Component: 2600 - total flux cleaned = 0.00218025 Jy ! Component: 2650 - total flux cleaned = 0.0021989 Jy ! Component: 2700 - total flux cleaned = 0.00220995 Jy ! Component: 2750 - total flux cleaned = 0.00221727 Jy ! Component: 2800 - total flux cleaned = 0.00222457 Jy ! Component: 2850 - total flux cleaned = 0.00223178 Jy ! Component: 2900 - total flux cleaned = 0.00224964 Jy ! Component: 2950 - total flux cleaned = 0.0022532 Jy ! Component: 3000 - total flux cleaned = 0.00227434 Jy ! Component: 3050 - total flux cleaned = 0.00227784 Jy ! Component: 3100 - total flux cleaned = 0.00228825 Jy ! Component: 3150 - total flux cleaned = 0.00229167 Jy ! Component: 3200 - total flux cleaned = 0.00230193 Jy ! Component: 3250 - total flux cleaned = 0.00231547 Jy ! Component: 3300 - total flux cleaned = 0.00232557 Jy ! Component: 3350 - total flux cleaned = 0.0023322 Jy ! Component: 3400 - total flux cleaned = 0.00233552 Jy ! Component: 3450 - total flux cleaned = 0.00235533 Jy ! Component: 3500 - total flux cleaned = 0.00236189 Jy ! Component: 3550 - total flux cleaned = 0.0023847 Jy ! Component: 3600 - total flux cleaned = 0.00240087 Jy ! Component: 3650 - total flux cleaned = 0.00240728 Jy ! Component: 3700 - total flux cleaned = 0.00242326 Jy ! Component: 3750 - total flux cleaned = 0.00243281 Jy ! Component: 3800 - total flux cleaned = 0.00244549 Jy ! Component: 3850 - total flux cleaned = 0.00244864 Jy ! Component: 3900 - total flux cleaned = 0.00247061 Jy ! Component: 3950 - total flux cleaned = 0.00247686 Jy ! Component: 4000 - total flux cleaned = 0.00250174 Jy ! Component: 4050 - total flux cleaned = 0.00251415 Jy ! Total flux subtracted in 4096 components = 0.00254195 Jy ! Clean residual min=-0.000225 max=0.000188 Jy/beam ! Clean residual mean=0.000001 rms=0.000056 Jy/beam ! Combined flux in latest and established models = 0.0175419 Jy keep ! Adding 305 model components to the UV plane model. ! The established model now contains 343 components and 0.0175419 Jy ![Exited script file: /opt64/bin/pima_mupet_02.dfm] wmap /vlbi/vcs9/uvm//J1512-2255_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.2 x 4.325 at 8.117 degrees (North through East) ! Clean map min=-0.00041963 max=0.014937 Jy/beam ! Writing clean map to FITS file: /vlbi/vcs9/uvm//J1512-2255_X_a_map.fits wmodel /vlbi/vcs9/uvm//J1512-2255_X_a_map.mod ! Writing 343 model components to file: /vlbi/vcs9/uvm//J1512-2255_X_a_map.mod wobs /vlbi/vcs9/uvm//J1512-2255_X_a_uvs.fits ! Writing UV FITS file: /vlbi/vcs9/uvm//J1512-2255_X_a_uvs.fits wwins /vlbi/vcs9/uvm//J1512-2255_X_a_map.win ! wwins: Wrote 2 windows to /vlbi/vcs9/uvm//J1512-2255_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0149373 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 5.75244e-05 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.15532 1.15532 2.31064 4.62128 9.24256 18.4851 36.9702 73.9405 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0001 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.014 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 259.668 quit ! Quitting program ! Log file /vlbi/vcs9/uvm//J1512-2255_X_a_dfm.log closed on Tue Dec 26 22:41:44 2017