! Started logfile: /vlbi/vcs9/uvm//J1438-2204_X_a_dfm.log on Tue Dec 26 22:38:58 2017
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    7.39200
obs     /vlbi/vcs9/uvm//J1438-2204_X_a_uvm.fits
! Reading UV FITS file: /vlbi/vcs9/uvm//J1438-2204_X_a_uvm.fits
! AN table 1: 54 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.716049 visibilities/baseline/integration-bin.
! Found source: J1438-2204
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 94 lines of history.
! 
! Reading 13920 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_02.dfm J1438-2204_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 60
float amp_soltime2
amp_soltime2 = 5
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.1
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_02.dvm version of 2017.12.26 === "
! === Difmap script: pima_mupet_02.dvm version of 2017.12.26 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.406319 Jy 
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 135 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 135 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 135 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 135 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 135 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 135 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 135 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 135 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.088744Jy  sigma=23.113483
! Fit after  self-cal, rms=0.618941Jy  sigma=12.794138
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
peakwin win_mult
! Inverting map and beam 
! Estimated beam: bmin=0.707 mas, bmaj=2.075 mas, bpa=-10.03 degrees
! Estimated noise=0.572479 mJy/beam.
! Added new window around map position (0, 0).
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.313489 Jy
! Component: 100  -  total flux cleaned = 0.385368 Jy
! Total flux subtracted in 100 components = 0.385368 Jy
! Clean residual min=-0.016557 max=0.037716 Jy/beam
! Clean residual mean=0.000049 rms=0.005080 Jy/beam
! Combined flux in latest and established models = 0.385368 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.385368 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.096703Jy  sigma=2.066175
! Fit after  self-cal, rms=0.096776Jy  sigma=2.064375
! Inverting map 
! Added new window around map position (1, 0).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.050145 Jy
! Component: 100  -  total flux cleaned = 0.0789894 Jy
! Total flux subtracted in 100 components = 0.0789894 Jy
! Clean residual min=-0.012339 max=0.019402 Jy/beam
! Clean residual mean=0.000025 rms=0.002926 Jy/beam
! Combined flux in latest and established models = 0.464358 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 17 model components to the UV plane model.
! The established model now contains 23 components and 0.464358 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.063452Jy  sigma=1.262368
! Fit after  self-cal, rms=0.062531Jy  sigma=1.244170
! Inverting map 
! Added new window around map position (-1, -1.8).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0225301 Jy
! Component: 100  -  total flux cleaned = 0.0345041 Jy
! Total flux subtracted in 100 components = 0.0345041 Jy
! Clean residual min=-0.009435 max=0.011415 Jy/beam
! Clean residual mean=0.000014 rms=0.002140 Jy/beam
! Combined flux in latest and established models = 0.498862 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 21 model components to the UV plane model.
! The established model now contains 43 components and 0.498862 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.053994Jy  sigma=1.037237
! Fit after  self-cal, rms=0.053951Jy  sigma=1.034770
! Inverting map 
print "============== Finished uniform weighting CLEAN =============="
! ============== Finished uniform weighting CLEAN ============== 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9836 mas, bmaj=2.576 mas, bpa=-8.101 degrees
! Estimated noise=0.295567 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0154122 Jy
! Component: 100  -  total flux cleaned = 0.0182816 Jy
! Component: 150  -  total flux cleaned = 0.0184934 Jy
! Component: 200  -  total flux cleaned = 0.0184951 Jy
! Total flux subtracted in 200 components = 0.0184951 Jy
! Clean residual min=-0.007326 max=0.007369 Jy/beam
! Clean residual mean=0.000023 rms=0.001653 Jy/beam
! Combined flux in latest and established models = 0.517357 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 29 model components to the UV plane model.
! The established model now contains 60 components and 0.517357 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.050631Jy  sigma=0.951889
! Fit after  self-cal, rms=0.050489Jy  sigma=0.948752
! Inverting map 
print "============== Finished natural weighting CLEAN =============="
! ============== Finished natural weighting CLEAN ============== 
! 
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.990857
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.97     HN        1.01     KP        1.00     
!   LA        1.04     MK        1.01     NL        1.01     OV        1.04     
!   PT        1.00     SC        0.96     
! 
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.99126
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        0.98     HN        1.02     KP        1.00     
!   LA        1.02     MK        1.01     NL        1.01     OV        1.02     
!   PT        1.00     SC        0.96     
! 
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.997765
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.93     HN        1.02     KP        1.00     
!   LA        1.02     MK        1.00     NL        1.01     OV        1.02     
!   PT        0.99     SC        0.97     
! 
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.998662
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.97     HN        1.00     KP        1.00     
!   LA        1.03     MK        0.99     NL        1.00     OV        1.02     
!   PT        0.99     SC        0.97     
! 
! 
! Correcting IF 5.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.00383
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.96     HN        1.02     KP        0.99     
!   LA        1.02     MK        1.01     NL        1.00     OV        1.01     
!   PT        0.99     SC        0.95     
! 
! 
! Correcting IF 6.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.999531
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.96     HN        1.01     KP        0.99     
!   LA        1.03     MK        0.99     NL        1.00     OV        1.01     
!   PT        0.99     SC        0.95     
! 
! 
! Correcting IF 7.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.00289
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.96     HN        1.01     KP        0.98     
!   LA        1.02     MK        1.01     NL        0.99     OV        1.01     
!   PT        0.98     SC        0.96     
! 
! 
! Correcting IF 8.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.0068
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.95     HN        1.00     KP        0.99     
!   LA        1.02     MK        1.00     NL        0.99     OV        1.01     
!   PT        0.99     SC        0.95     
! 
! 
! Fit before self-cal, rms=0.050489Jy  sigma=0.948752
! Fit after  self-cal, rms=0.047755Jy  sigma=0.892568
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.047755Jy  sigma=0.892568
! Fit after  self-cal, rms=0.047752Jy  sigma=0.892526
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9761 mas, bmaj=2.55 mas, bpa=-7.247 degrees
! Estimated noise=0.292911 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000917136 Jy
! Component: 100  -  total flux cleaned = -0.00168265 Jy
! Component: 150  -  total flux cleaned = -0.00212235 Jy
! Component: 200  -  total flux cleaned = -0.0022085 Jy
! Total flux subtracted in 200 components = -0.0022085 Jy
! Clean residual min=-0.004423 max=0.003866 Jy/beam
! Clean residual mean=-0.000007 rms=0.000898 Jy/beam
! Combined flux in latest and established models = 0.515148 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 18 model components to the UV plane model.
! The established model now contains 71 components and 0.515148 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.046644Jy  sigma=0.875192
! Fit after  self-cal, rms=0.046574Jy  sigma=0.873857
! Inverting map 
print "============== Finished amplitude gscale SELF-CAL =============="
! ============== Finished amplitude gscale SELF-CAL ============== 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.046574Jy  sigma=0.873857
! Fit after  self-cal, rms=0.046066Jy  sigma=0.862557
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000196112 Jy
! Component: 100  -  total flux cleaned = 4.04165e-05 Jy
! Component: 150  -  total flux cleaned = -9.60235e-05 Jy
! Component: 200  -  total flux cleaned = -9.16564e-05 Jy
! Total flux subtracted in 200 components = -9.16564e-05 Jy
! Clean residual min=-0.004204 max=0.003827 Jy/beam
! Clean residual mean=-0.000007 rms=0.000856 Jy/beam
! Combined flux in latest and established models = 0.515057 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 17 model components to the UV plane model.
! The established model now contains 79 components and 0.515057 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.045728Jy  sigma=0.857919
! Fit after  self-cal, rms=0.045581Jy  sigma=0.854972
! Inverting map 
print "=== Finished natural weighting clean with shorter phase_soltime "
! === Finished natural weighting clean with shorter phase_soltime  
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9761 x 2.55 at -7.247 degrees (North through East)
! Clean map  min=-0.0070509  max=0.37509 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "============== Finished amplitude self-cal =============="
  end if
! Performing amp+phase self-cal over 60 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.045581Jy  sigma=0.854972
! Fit after  self-cal, rms=0.039811Jy  sigma=0.694118
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039811Jy  sigma=0.694118
! Fit after  self-cal, rms=0.039769Jy  sigma=0.693189
! Inverting map and beam 
! Estimated beam: bmin=0.9732 mas, bmaj=2.544 mas, bpa=-7.088 degrees
! Estimated noise=0.292371 mJy/beam.
! Added new window around map position (7.2, 4).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00178708 Jy
! Component: 100  -  total flux cleaned = 0.00206465 Jy
! Component: 150  -  total flux cleaned = 0.00233397 Jy
! Component: 200  -  total flux cleaned = 0.00255282 Jy
! Total flux subtracted in 200 components = 0.00255282 Jy
! Clean residual min=-0.001693 max=0.002624 Jy/beam
! Clean residual mean=-0.000002 rms=0.000464 Jy/beam
! Combined flux in latest and established models = 0.517609 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 23 model components to the UV plane model.
! The established model now contains 100 components and 0.51761 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039327Jy  sigma=0.684928
! Fit after  self-cal, rms=0.039284Jy  sigma=0.684166
! Inverting map 
! Added new window around map position (-6.8, 17.6).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00237491 Jy
! Component: 100  -  total flux cleaned = 0.00275638 Jy
! Component: 150  -  total flux cleaned = 0.00293651 Jy
! Component: 200  -  total flux cleaned = 0.00301508 Jy
! Total flux subtracted in 200 components = 0.00301508 Jy
! Clean residual min=-0.001550 max=0.001874 Jy/beam
! Clean residual mean=0.000001 rms=0.000382 Jy/beam
! Combined flux in latest and established models = 0.520625 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 33 model components to the UV plane model.
! The established model now contains 126 components and 0.520625 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039076Jy  sigma=0.680325
! Fit after  self-cal, rms=0.039049Jy  sigma=0.679841
! Inverting map 
! Added new window around map position (9.6, 24.2).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00130964 Jy
! Component: 100  -  total flux cleaned = 0.0017846 Jy
! Component: 150  -  total flux cleaned = 0.00182574 Jy
! Component: 200  -  total flux cleaned = 0.00175869 Jy
! Total flux subtracted in 200 components = 0.00175869 Jy
! Clean residual min=-0.001355 max=0.001427 Jy/beam
! Clean residual mean=0.000001 rms=0.000334 Jy/beam
! Combined flux in latest and established models = 0.522383 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 29 model components to the UV plane model.
! The established model now contains 147 components and 0.522383 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.038923Jy  sigma=0.677572
! Fit after  self-cal, rms=0.038914Jy  sigma=0.677401
! Inverting map 
! Added new window around map position (12.6, -5.2).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000971 Jy
! Component: 100  -  total flux cleaned = 0.00130204 Jy
! Component: 150  -  total flux cleaned = 0.00159963 Jy
! Component: 200  -  total flux cleaned = 0.00174924 Jy
! Total flux subtracted in 200 components = 0.00174924 Jy
! Clean residual min=-0.001196 max=0.001145 Jy/beam
! Clean residual mean=0.000001 rms=0.000299 Jy/beam
! Combined flux in latest and established models = 0.524133 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 32 model components to the UV plane model.
! The established model now contains 169 components and 0.524133 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.038814Jy  sigma=0.675819
! Fit after  self-cal, rms=0.038807Jy  sigma=0.675709
! Inverting map 
! ============== Finished amplitude self-cal ============== 
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7032 mas, bmaj=2.062 mas, bpa=-9.578 degrees
! Estimated noise=0.572032 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.313542 Jy
! Component: 100  -  total flux cleaned = 0.391417 Jy
! Component: 150  -  total flux cleaned = 0.437656 Jy
! Component: 200  -  total flux cleaned = 0.467284 Jy
! Total flux subtracted in 200 components = 0.467284 Jy
! Clean residual min=-0.008761 max=0.012115 Jy/beam
! Clean residual mean=0.000011 rms=0.002211 Jy/beam
! Combined flux in latest and established models = 0.467284 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 30 model components to the UV plane model.
! The established model now contains 30 components and 0.467284 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9732 mas, bmaj=2.544 mas, bpa=-7.088 degrees
! Estimated noise=0.292371 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0290288 Jy
! Component: 100  -  total flux cleaned = 0.0410015 Jy
! Component: 150  -  total flux cleaned = 0.0434507 Jy
! Component: 200  -  total flux cleaned = 0.0455006 Jy
! Total flux subtracted in 200 components = 0.0455006 Jy
! Clean residual min=-0.003174 max=0.003555 Jy/beam
! Clean residual mean=-0.000002 rms=0.000748 Jy/beam
! Combined flux in latest and established models = 0.512784 Jy
! Adding 45 model components to the UV plane model.
! The established model now contains 58 components and 0.512784 Jy
! Inverting map 
! Added new window around map position (-21.2, -35.8).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00281357 Jy
! Component: 100  -  total flux cleaned = 0.00387655 Jy
! Component: 150  -  total flux cleaned = 0.00494727 Jy
! Component: 200  -  total flux cleaned = 0.00599464 Jy
! Total flux subtracted in 200 components = 0.00599464 Jy
! Clean residual min=-0.002272 max=0.001988 Jy/beam
! Clean residual mean=0.000001 rms=0.000507 Jy/beam
! Combined flux in latest and established models = 0.518779 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 77 components and 0.518779 Jy
! Inverting map 
clean
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00102982 Jy
! Component: 100  -  total flux cleaned = 0.00184778 Jy
! Component: 150  -  total flux cleaned = 0.00225819 Jy
! Component: 200  -  total flux cleaned = 0.00278545 Jy
! Total flux subtracted in 200 components = 0.00278545 Jy
! Clean residual min=-0.001866 max=0.001465 Jy/beam
! Clean residual mean=0.000002 rms=0.000415 Jy/beam
! Combined flux in latest and established models = 0.521564 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 40 model components to the UV plane model.
! The established model now contains 94 components and 0.521564 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039454Jy  sigma=0.683704
! Fit after  self-cal, rms=0.039409Jy  sigma=0.683093
wmodel J1438-2204_X_map.mod
! Writing 94 model components to file: J1438-2204_X_map.mod
wobs   J1438-2204_X_uvs.fits
! Writing UV FITS file: J1438-2204_X_uvs.fits
wwins  J1438-2204_X_map.win
! wwins: Wrote 8 windows to J1438-2204_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000811849 Jy
! Component: 100  -  total flux cleaned = -0.00130703 Jy
! Component: 150  -  total flux cleaned = -0.00163231 Jy
! Component: 200  -  total flux cleaned = -0.00183586 Jy
! Component: 250  -  total flux cleaned = -0.00195672 Jy
! Component: 300  -  total flux cleaned = -0.0020724 Jy
! Component: 350  -  total flux cleaned = -0.00207252 Jy
! Component: 400  -  total flux cleaned = -0.00211651 Jy
! Component: 450  -  total flux cleaned = -0.00209572 Jy
! Component: 500  -  total flux cleaned = -0.00209618 Jy
! Component: 550  -  total flux cleaned = -0.00205615 Jy
! Component: 600  -  total flux cleaned = -0.00203654 Jy
! Component: 650  -  total flux cleaned = -0.00201668 Jy
! Component: 700  -  total flux cleaned = -0.0019784 Jy
! Component: 750  -  total flux cleaned = -0.00194109 Jy
! Component: 800  -  total flux cleaned = -0.0018868 Jy
! Component: 850  -  total flux cleaned = -0.00186894 Jy
! Component: 900  -  total flux cleaned = -0.0018337 Jy
! Component: 950  -  total flux cleaned = -0.00183364 Jy
! Component: 1000  -  total flux cleaned = -0.00181639 Jy
! Component: 1050  -  total flux cleaned = -0.00183302 Jy
! Component: 1100  -  total flux cleaned = -0.00183254 Jy
! Component: 1150  -  total flux cleaned = -0.00178415 Jy
! Component: 1200  -  total flux cleaned = -0.00179995 Jy
! Component: 1250  -  total flux cleaned = -0.00179969 Jy
! Component: 1300  -  total flux cleaned = -0.00179973 Jy
! Component: 1350  -  total flux cleaned = -0.0017694 Jy
! Component: 1400  -  total flux cleaned = -0.00176929 Jy
! Component: 1450  -  total flux cleaned = -0.0017253 Jy
! Component: 1500  -  total flux cleaned = -0.00175428 Jy
! Component: 1550  -  total flux cleaned = -0.00169693 Jy
! Component: 1600  -  total flux cleaned = -0.00168265 Jy
! Component: 1650  -  total flux cleaned = -0.00166842 Jy
! Component: 1700  -  total flux cleaned = -0.0015855 Jy
! Component: 1750  -  total flux cleaned = -0.00155824 Jy
! Component: 1800  -  total flux cleaned = -0.00150462 Jy
! Component: 1850  -  total flux cleaned = -0.00147797 Jy
! Component: 1900  -  total flux cleaned = -0.00143854 Jy
! Component: 1950  -  total flux cleaned = -0.00137379 Jy
! Component: 2000  -  total flux cleaned = -0.00136114 Jy
! Component: 2050  -  total flux cleaned = -0.00131045 Jy
! Component: 2100  -  total flux cleaned = -0.00127288 Jy
! Component: 2150  -  total flux cleaned = -0.00123554 Jy
! Component: 2200  -  total flux cleaned = -0.00116188 Jy
! Component: 2250  -  total flux cleaned = -0.00114952 Jy
! Component: 2300  -  total flux cleaned = -0.00108957 Jy
! Component: 2350  -  total flux cleaned = -0.0010657 Jy
! Component: 2400  -  total flux cleaned = -0.000983185 Jy
! Component: 2450  -  total flux cleaned = -0.000924765 Jy
! Component: 2500  -  total flux cleaned = -0.000878421 Jy
! Component: 2550  -  total flux cleaned = -0.000820985 Jy
! Component: 2600  -  total flux cleaned = -0.000786745 Jy
! Component: 2650  -  total flux cleaned = -0.000719123 Jy
! Component: 2700  -  total flux cleaned = -0.000640999 Jy
! Component: 2750  -  total flux cleaned = -0.000640949 Jy
! Component: 2800  -  total flux cleaned = -0.000586103 Jy
! Component: 2850  -  total flux cleaned = -0.000553428 Jy
! Component: 2900  -  total flux cleaned = -0.000499537 Jy
! Component: 2950  -  total flux cleaned = -0.000445979 Jy
! Component: 3000  -  total flux cleaned = -0.000371581 Jy
! Component: 3050  -  total flux cleaned = -0.000339832 Jy
! Component: 3100  -  total flux cleaned = -0.000287468 Jy
! Component: 3150  -  total flux cleaned = -0.000225201 Jy
! Component: 3200  -  total flux cleaned = -0.000163318 Jy
! Component: 3250  -  total flux cleaned = -0.000101762 Jy
! Component: 3300  -  total flux cleaned = -3.05328e-05 Jy
! Component: 3350  -  total flux cleaned = 2.00498e-05 Jy
! Component: 3400  -  total flux cleaned = 8.02837e-05 Jy
! Component: 3450  -  total flux cleaned = 0.000100226 Jy
! Component: 3500  -  total flux cleaned = 0.000169677 Jy
! Component: 3550  -  total flux cleaned = 0.000209007 Jy
! Component: 3600  -  total flux cleaned = 0.000277564 Jy
! Component: 3650  -  total flux cleaned = 0.000316545 Jy
! Component: 3700  -  total flux cleaned = 0.000364928 Jy
! Component: 3750  -  total flux cleaned = 0.000422766 Jy
! Component: 3800  -  total flux cleaned = 0.000451485 Jy
! Component: 3850  -  total flux cleaned = 0.000527717 Jy
! Component: 3900  -  total flux cleaned = 0.000565649 Jy
! Component: 3950  -  total flux cleaned = 0.000612649 Jy
! Component: 4000  -  total flux cleaned = 0.00064074 Jy
! Component: 4050  -  total flux cleaned = 0.000696546 Jy
! Total flux subtracted in 4096 components = 0.000705818 Jy
! Clean residual min=-0.000509 max=0.000509 Jy/beam
! Clean residual mean=-0.000001 rms=0.000158 Jy/beam
! Combined flux in latest and established models = 0.52227 Jy
keep
! Adding 241 model components to the UV plane model.
! The established model now contains 335 components and 0.52227 Jy
![Exited script file: /opt64/bin/pima_mupet_02.dfm]
wmap   /vlbi/vcs9/uvm//J1438-2204_X_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9732 x 2.544 at -7.088 degrees (North through East)
! Clean map  min=-0.0064271  max=0.3761 Jy/beam
! Writing clean map to FITS file: /vlbi/vcs9/uvm//J1438-2204_X_a_map.fits
wmodel /vlbi/vcs9/uvm//J1438-2204_X_a_map.mod
! Writing 335 model components to file: /vlbi/vcs9/uvm//J1438-2204_X_a_map.mod
wobs   /vlbi/vcs9/uvm//J1438-2204_X_a_uvs.fits
! Writing UV FITS file: /vlbi/vcs9/uvm//J1438-2204_X_a_uvs.fits
wwins  /vlbi/vcs9/uvm//J1438-2204_X_a_map.win
! wwins: Wrote 9 windows to /vlbi/vcs9/uvm//J1438-2204_X_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.376103 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000155151 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.123757 0.123757 0.247514 0.495029 0.990058 1.98012 3.96023 7.92046 15.8409 31.6819 63.3637
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.376 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  2424.1 
quit
! Quitting program
! Log file /vlbi/vcs9/uvm//J1438-2204_X_a_dfm.log closed on Tue Dec 26 22:39:03 2017