! Started logfile: /vlbi/vcs9/uvm//J1414+7905_C_a_dfm.log on Tue Dec 26 22:35:46 2017
float field_size
field_size =  1024
float field_cell
field_cell =   0.3000
float taper_size
taper_size =   40.0
float freq
freq       =    4.12800
obs     /vlbi/vcs9/uvm//J1414+7905_C_a_uvm.fits
! Reading UV FITS file: /vlbi/vcs9/uvm//J1414+7905_C_a_uvm.fits
! AN table 1: 177 integrations on 6 of 6 possible baselines.
! AN table 2: 326 integrations on 10 of 10 possible baselines.
! Apparent sampling: 0.780657 visibilities/baseline/integration-bin.
! Found source: J1414+7905
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 85 lines of history.
! 
! Reading 26992 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/opt64/bin/pima_mupet_02.dfm J1414+7905_C]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 60
float amp_soltime2
amp_soltime2 = 5
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.1
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_02.dvm version of 2017.12.26 === "
! === Difmap script: pima_mupet_02.dvm version of 2017.12.26 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.0264048 Jy 
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 297 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 297 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 297 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 297 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 5.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 297 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 6.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 297 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 7.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 297 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 8.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 297 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.000268Jy  sigma=30.169258
! Fit after  self-cal, rms=0.986245Jy  sigma=29.688503
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
peakwin win_mult
! Inverting map and beam 
! Estimated beam: bmin=6.49 mas, bmaj=15.65 mas, bpa=65.4 degrees
! Estimated noise=0.404455 mJy/beam.
! Added new window around map position (0, 0).
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0123939 Jy
! Component: 100  -  total flux cleaned = 0.0145279 Jy
! Total flux subtracted in 100 components = 0.0145279 Jy
! Clean residual min=-0.001477 max=0.001154 Jy/beam
! Clean residual mean=-0.000009 rms=0.000419 Jy/beam
! Combined flux in latest and established models = 0.014528 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.014528 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022332Jy  sigma=0.607937
! Fit after  self-cal, rms=0.022319Jy  sigma=0.607495
! Inverting map 
print "============== Finished uniform weighting CLEAN =============="
! ============== Finished uniform weighting CLEAN ============== 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=7.017 mas, bmaj=17.7 mas, bpa=66.54 degrees
! Estimated noise=0.143337 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00162328 Jy
! Component: 100  -  total flux cleaned = 0.0026849 Jy
! Component: 150  -  total flux cleaned = 0.00348442 Jy
! Component: 200  -  total flux cleaned = 0.00411811 Jy
! Total flux subtracted in 200 components = 0.00411811 Jy
! Clean residual min=-0.001017 max=0.000826 Jy/beam
! Clean residual mean=-0.000005 rms=0.000308 Jy/beam
! Combined flux in latest and established models = 0.0186461 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 107 model components to the UV plane model.
! The established model now contains 120 components and 0.0186461 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022255Jy  sigma=0.603906
! Fit after  self-cal, rms=0.022255Jy  sigma=0.603878
! Inverting map 
print "============== Finished natural weighting CLEAN =============="
! ============== Finished natural weighting CLEAN ============== 
! 
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.08048
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.92     KP        0.93     LA        0.91     PT        0.94     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 1.08242
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.85     KP        1.00     LA        0.84     OV        0.88     
!   PT        1.04     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.01659
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.97     KP        0.99     LA        0.91     PT        1.07     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 1.04297
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.88     KP        1.10     LA        0.85     OV        1.00     
!   PT        0.96     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.987317
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.17     KP        1.15     LA        0.85     PT        0.87     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 1.03916
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.89     KP        1.00     LA        0.93     OV        0.97     
!   PT        1.02     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.957057
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.12     KP        1.26     LA        0.91     PT        0.88     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.982366
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.02     KP        1.10     LA        1.02     OV        0.97     
!   PT        0.98     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.943886
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.05     KP        1.07     LA        0.93     PT        1.18     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.976279
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.04     KP        0.96     LA        0.88     OV        1.20     
!   PT        1.03     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.899045
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.35     KP        1.22     LA        0.88     PT        1.01     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.906999
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.19     KP        1.03     LA        0.94     OV        1.13     
!   PT        1.22     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.934835
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.21     KP        1.24     LA        0.91     PT        0.93     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.935531
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.15     KP        1.05     LA        0.87     OV        1.24     
!   PT        1.03     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.972148
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.07     KP        1.22     LA        0.86     PT        0.97     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.948403
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.08     KP        1.04     LA        0.84     OV        1.13     
!   PT        1.18     
! 
! 
! Fit before self-cal, rms=0.022255Jy  sigma=0.603878
! Fit after  self-cal, rms=0.022293Jy  sigma=0.602194
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022293Jy  sigma=0.602194
! Fit after  self-cal, rms=0.022294Jy  sigma=0.602174
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=7.328 mas, bmaj=17.83 mas, bpa=66.27 degrees
! Estimated noise=0.13617 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000628844 Jy
! Component: 100  -  total flux cleaned = -0.000680468 Jy
! Component: 150  -  total flux cleaned = -0.000715175 Jy
! Component: 200  -  total flux cleaned = -0.000739424 Jy
! Total flux subtracted in 200 components = -0.000739424 Jy
! Clean residual min=-0.000713 max=0.000545 Jy/beam
! Clean residual mean=-0.000016 rms=0.000200 Jy/beam
! Combined flux in latest and established models = 0.0179066 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 60 model components to the UV plane model.
! The established model now contains 176 components and 0.0179066 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022276Jy  sigma=0.601629
! Fit after  self-cal, rms=0.022276Jy  sigma=0.601621
! Inverting map 
print "============== Finished amplitude gscale SELF-CAL =============="
! ============== Finished amplitude gscale SELF-CAL ============== 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022276Jy  sigma=0.601621
! Fit after  self-cal, rms=0.022223Jy  sigma=0.599405
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 5.77799e-05 Jy
! Component: 100  -  total flux cleaned = 9.11208e-05 Jy
! Component: 150  -  total flux cleaned = 0.000112805 Jy
! Component: 200  -  total flux cleaned = 0.000134951 Jy
! Total flux subtracted in 200 components = 0.000134951 Jy
! Clean residual min=-0.000703 max=0.000569 Jy/beam
! Clean residual mean=-0.000016 rms=0.000204 Jy/beam
! Combined flux in latest and established models = 0.0180416 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 35 model components to the UV plane model.
! The established model now contains 206 components and 0.0180416 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022221Jy  sigma=0.599373
! Fit after  self-cal, rms=0.022217Jy  sigma=0.599085
! Inverting map 
print "=== Finished natural weighting clean with shorter phase_soltime "
! === Finished natural weighting clean with shorter phase_soltime  
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 7.328 x 17.83 at 66.27 degrees (North through East)
! Clean map  min=-0.00069244  max=0.01411 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "============== Finished amplitude self-cal =============="
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.54 mas, bmaj=15.78 mas, bpa=65.44 degrees
! Estimated noise=0.398385 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0123122 Jy
! Component: 100  -  total flux cleaned = 0.0142462 Jy
! Component: 150  -  total flux cleaned = 0.015179 Jy
! Component: 200  -  total flux cleaned = 0.0158391 Jy
! Total flux subtracted in 200 components = 0.0158391 Jy
! Clean residual min=-0.000877 max=0.000821 Jy/beam
! Clean residual mean=-0.000010 rms=0.000274 Jy/beam
! Combined flux in latest and established models = 0.0158391 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 45 model components to the UV plane model.
! The established model now contains 45 components and 0.0158391 Jy
! Inverting map and beam 
! Estimated beam: bmin=7.328 mas, bmaj=17.83 mas, bpa=66.27 degrees
! Estimated noise=0.13617 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000686866 Jy
! Component: 100  -  total flux cleaned = 0.00110931 Jy
! Component: 150  -  total flux cleaned = 0.00142441 Jy
! Component: 200  -  total flux cleaned = 0.00166902 Jy
! Total flux subtracted in 200 components = 0.00166902 Jy
! Clean residual min=-0.000712 max=0.000540 Jy/beam
! Clean residual mean=-0.000015 rms=0.000210 Jy/beam
! Combined flux in latest and established models = 0.0175081 Jy
! Adding 59 model components to the UV plane model.
! The established model now contains 103 components and 0.0175081 Jy
! Inverting map 
clean
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000192745 Jy
! Component: 100  -  total flux cleaned = 0.000345995 Jy
! Component: 150  -  total flux cleaned = 0.000468496 Jy
! Component: 200  -  total flux cleaned = 0.000566812 Jy
! Total flux subtracted in 200 components = 0.000566812 Jy
! Clean residual min=-0.000712 max=0.000565 Jy/beam
! Clean residual mean=-0.000016 rms=0.000202 Jy/beam
! Combined flux in latest and established models = 0.0180749 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 16 model components to the UV plane model.
! The established model now contains 111 components and 0.0180749 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022219Jy  sigma=0.599067
! Fit after  self-cal, rms=0.022219Jy  sigma=0.598987
wmodel J1414+7905_C_map.mod
! Writing 111 model components to file: J1414+7905_C_map.mod
wobs   J1414+7905_C_uvs.fits
! Writing UV FITS file: J1414+7905_C_uvs.fits
wwins  J1414+7905_C_map.win
! wwins: Wrote 1 windows to J1414+7905_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000294814 Jy
! Component: 100  -  total flux cleaned = -0.000499849 Jy
! Component: 150  -  total flux cleaned = -0.00068327 Jy
! Component: 200  -  total flux cleaned = -0.000821551 Jy
! Component: 250  -  total flux cleaned = -0.000936497 Jy
! Component: 300  -  total flux cleaned = -0.00103899 Jy
! Component: 350  -  total flux cleaned = -0.00112353 Jy
! Component: 400  -  total flux cleaned = -0.00121179 Jy
! Component: 450  -  total flux cleaned = -0.00128383 Jy
! Component: 500  -  total flux cleaned = -0.00134097 Jy
! Component: 550  -  total flux cleaned = -0.00139612 Jy
! Component: 600  -  total flux cleaned = -0.00143755 Jy
! Component: 650  -  total flux cleaned = -0.00146633 Jy
! Component: 700  -  total flux cleaned = -0.00150556 Jy
! Component: 750  -  total flux cleaned = -0.00154368 Jy
! Component: 800  -  total flux cleaned = -0.00157554 Jy
! Component: 850  -  total flux cleaned = -0.00159637 Jy
! Component: 900  -  total flux cleaned = -0.00163668 Jy
! Component: 950  -  total flux cleaned = -0.00167082 Jy
! Component: 1000  -  total flux cleaned = -0.00169461 Jy
! Component: 1050  -  total flux cleaned = -0.0017272 Jy
! Component: 1100  -  total flux cleaned = -0.00176358 Jy
! Component: 1150  -  total flux cleaned = -0.00178586 Jy
! Component: 1200  -  total flux cleaned = -0.00181638 Jy
! Component: 1250  -  total flux cleaned = -0.00184199 Jy
! Component: 1300  -  total flux cleaned = -0.00186285 Jy
! Component: 1350  -  total flux cleaned = -0.00188333 Jy
! Component: 1400  -  total flux cleaned = -0.00190348 Jy
! Component: 1450  -  total flux cleaned = -0.00192328 Jy
! Component: 1500  -  total flux cleaned = -0.00194273 Jy
! Component: 1550  -  total flux cleaned = -0.00196183 Jy
! Component: 1600  -  total flux cleaned = -0.00197694 Jy
! Component: 1650  -  total flux cleaned = -0.00199916 Jy
! Component: 1700  -  total flux cleaned = -0.00201737 Jy
! Component: 1750  -  total flux cleaned = -0.00204251 Jy
! Component: 1800  -  total flux cleaned = -0.00206373 Jy
! Component: 1850  -  total flux cleaned = -0.00207418 Jy
! Component: 1900  -  total flux cleaned = -0.00209491 Jy
! Component: 1950  -  total flux cleaned = -0.0021187 Jy
! Component: 2000  -  total flux cleaned = -0.00213549 Jy
! Component: 2050  -  total flux cleaned = -0.00215867 Jy
! Component: 2100  -  total flux cleaned = -0.00217499 Jy
! Component: 2150  -  total flux cleaned = -0.00219752 Jy
! Component: 2200  -  total flux cleaned = -0.00221978 Jy
! Component: 2250  -  total flux cleaned = -0.00224493 Jy
! Component: 2300  -  total flux cleaned = -0.00226358 Jy
! Component: 2350  -  total flux cleaned = -0.00228815 Jy
! Component: 2400  -  total flux cleaned = -0.00230637 Jy
! Component: 2450  -  total flux cleaned = -0.00233041 Jy
! Component: 2500  -  total flux cleaned = -0.00234827 Jy
! Component: 2550  -  total flux cleaned = -0.00237767 Jy
! Component: 2600  -  total flux cleaned = -0.00239512 Jy
! Component: 2650  -  total flux cleaned = -0.00241816 Jy
! Component: 2700  -  total flux cleaned = -0.00243241 Jy
! Component: 2750  -  total flux cleaned = -0.00245221 Jy
! Component: 2800  -  total flux cleaned = -0.00246623 Jy
! Component: 2850  -  total flux cleaned = -0.00247457 Jy
! Component: 2900  -  total flux cleaned = -0.00248559 Jy
! Component: 2950  -  total flux cleaned = -0.00248831 Jy
! Component: 3000  -  total flux cleaned = -0.00249646 Jy
! Component: 3050  -  total flux cleaned = -0.00250455 Jy
! Component: 3100  -  total flux cleaned = -0.00251525 Jy
! Component: 3150  -  total flux cleaned = -0.00253115 Jy
! Component: 3200  -  total flux cleaned = -0.00254167 Jy
! Component: 3250  -  total flux cleaned = -0.0025521 Jy
! Component: 3300  -  total flux cleaned = -0.00255991 Jy
! Component: 3350  -  total flux cleaned = -0.00257796 Jy
! Component: 3400  -  total flux cleaned = -0.00258308 Jy
! Component: 3450  -  total flux cleaned = -0.00259072 Jy
! Component: 3500  -  total flux cleaned = -0.0026059 Jy
! Component: 3550  -  total flux cleaned = -0.00262097 Jy
! Component: 3600  -  total flux cleaned = -0.00262844 Jy
! Component: 3650  -  total flux cleaned = -0.00263836 Jy
! Component: 3700  -  total flux cleaned = -0.0026482 Jy
! Component: 3750  -  total flux cleaned = -0.00266046 Jy
! Component: 3800  -  total flux cleaned = -0.00267265 Jy
! Component: 3850  -  total flux cleaned = -0.00268476 Jy
! Component: 3900  -  total flux cleaned = -0.0026968 Jy
! Component: 3950  -  total flux cleaned = -0.00270637 Jy
! Component: 4000  -  total flux cleaned = -0.00271588 Jy
! Component: 4050  -  total flux cleaned = -0.00272772 Jy
! Total flux subtracted in 4096 components = -0.00273713 Jy
! Clean residual min=-0.000120 max=0.000132 Jy/beam
! Clean residual mean=-0.000013 rms=0.000055 Jy/beam
! Combined flux in latest and established models = 0.0153378 Jy
keep
! Adding 555 model components to the UV plane model.
! The established model now contains 666 components and 0.0153378 Jy
![Exited script file: /opt64/bin/pima_mupet_02.dfm]
wmap   /vlbi/vcs9/uvm//J1414+7905_C_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 7.328 x 17.83 at 66.27 degrees (North through East)
! Clean map  min=-0.00055238  max=0.014121 Jy/beam
! Writing clean map to FITS file: /vlbi/vcs9/uvm//J1414+7905_C_a_map.fits
wmodel /vlbi/vcs9/uvm//J1414+7905_C_a_map.mod
! Writing 666 model components to file: /vlbi/vcs9/uvm//J1414+7905_C_a_map.mod
wobs   /vlbi/vcs9/uvm//J1414+7905_C_a_uvs.fits
! Writing UV FITS file: /vlbi/vcs9/uvm//J1414+7905_C_a_uvs.fits
wwins  /vlbi/vcs9/uvm//J1414+7905_C_a_map.win
! wwins: Wrote 2 windows to /vlbi/vcs9/uvm//J1414+7905_C_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0141208 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 5.58732e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.18704 1.18704 2.37407 4.74815 9.4963 18.9926 37.9852 75.9704
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.014 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  252.73 
quit
! Quitting program
! Log file /vlbi/vcs9/uvm//J1414+7905_C_a_dfm.log closed on Tue Dec 26 22:35:51 2017