! Started logfile: /vlbi/vcs9/uvm//J1413-0710_X_a_dfm.log on Tue Dec 26 22:35:42 2017 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 7.39200 obs /vlbi/vcs9/uvm//J1413-0710_X_a_uvm.fits ! Reading UV FITS file: /vlbi/vcs9/uvm//J1413-0710_X_a_uvm.fits ! AN table 1: 28 integrations on 45 of 45 possible baselines. ! AN table 2: 55 integrations on 15 of 15 possible baselines. ! Apparent sampling: 0.971703 visibilities/baseline/integration-bin. ! Found source: J1413-0710 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 7.392e+09 3.2e+07 1 3.2e+07 ! 02 2 7.424e+09 3.2e+07 1 3.2e+07 ! 03 3 7.456e+09 3.2e+07 1 3.2e+07 ! 04 4 7.552e+09 3.2e+07 1 3.2e+07 ! 05 5 7.744e+09 3.2e+07 1 3.2e+07 ! 06 6 7.776e+09 3.2e+07 1 3.2e+07 ! 07 7 7.808e+09 3.2e+07 1 3.2e+07 ! 08 8 7.84e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 94 lines of history. ! ! Reading 16208 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 8 channels. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_02.dfm J1413-0710_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 60 float amp_soltime2 amp_soltime2 = 5 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.1 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_02.dvm version of 2017.12.26 === " ! === Difmap script: pima_mupet_02.dvm version of 2017.12.26 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.043806 Jy startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.000380Jy sigma=22.861939 ! Fit after self-cal, rms=0.975296Jy sigma=22.291298 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. peakwin win_mult ! Inverting map and beam ! Estimated beam: bmin=0.8109 mas, bmaj=2.069 mas, bpa=-3.732 degrees ! Estimated noise=0.458882 mJy/beam. ! Added new window around map position (0, 0). flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0200695 Jy ! Component: 100 - total flux cleaned = 0.0241909 Jy ! Total flux subtracted in 100 components = 0.0241909 Jy ! Clean residual min=-0.001686 max=0.001789 Jy/beam ! Clean residual mean=-0.000004 rms=0.000436 Jy/beam ! Combined flux in latest and established models = 0.0241909 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.0241909 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.035705Jy sigma=0.715834 ! Fit after self-cal, rms=0.035692Jy sigma=0.715371 ! Inverting map print "============== Finished uniform weighting CLEAN ==============" ! ============== Finished uniform weighting CLEAN ============== ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.177 mas, bmaj=2.827 mas, bpa=-3.809 degrees ! Estimated noise=0.24295 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00281415 Jy ! Component: 100 - total flux cleaned = 0.00366249 Jy ! Component: 150 - total flux cleaned = 0.00379194 Jy ! Component: 200 - total flux cleaned = 0.00379214 Jy ! Total flux subtracted in 200 components = 0.00379214 Jy ! Clean residual min=-0.001278 max=0.001714 Jy/beam ! Clean residual mean=-0.000004 rms=0.000366 Jy/beam ! Combined flux in latest and established models = 0.027983 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 29 components and 0.027983 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.035567Jy sigma=0.711713 ! Fit after self-cal, rms=0.035567Jy sigma=0.711705 ! Inverting map print "============== Finished natural weighting CLEAN ==============" ! ============== Finished natural weighting CLEAN ============== ! gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.968183 ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.00 HN 1.04 KP 0.99 ! LA 0.94 MK 1.00 NL 0.96 OV 1.15 ! PT 1.15 SC 1.21 ! ! Amplitude normalization factor in sub-array 2: 1.0412 ! Telescope amplitude corrections in sub-array 2: ! BR 0.86 FD 0.95 HN 1.03 LA 1.01 ! NL 0.93 OV 0.98 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.00114 ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.91 HN 1.05 KP 1.01 ! LA 0.95 MK 1.01 NL 0.97 OV 1.03 ! PT 0.88 SC 1.14 ! ! Amplitude normalization factor in sub-array 2: 0.989569 ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 1.04 HN 1.14 LA 1.09 ! NL 0.90 OV 0.86 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.973526 ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.03 HN 1.11 KP 1.00 ! LA 0.98 MK 0.90 NL 1.10 OV 1.06 ! PT 0.98 SC 1.01 ! ! Amplitude normalization factor in sub-array 2: 1.03609 ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 0.98 HN 1.00 LA 1.08 ! NL 0.87 OV 0.86 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.855151 ! Telescope amplitude corrections in sub-array 1: ! BR 1.19 FD 1.18 HN 1.21 KP 1.09 ! LA 1.12 MK 1.29 NL 1.00 OV 1.36 ! PT 1.15 SC 1.11 ! ! Amplitude normalization factor in sub-array 2: 0.947494 ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.13 HN 0.96 LA 1.13 ! NL 1.11 OV 0.99 ! ! ! Correcting IF 5. ! Amplitude normalization factor in sub-array 1: 1.01804 ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 0.89 HN 0.97 KP 0.95 ! LA 1.05 MK 1.07 NL 0.90 OV 0.99 ! PT 1.02 SC 0.88 ! ! Amplitude normalization factor in sub-array 2: 1.05163 ! Telescope amplitude corrections in sub-array 2: ! BR 0.84 FD 1.01 HN 0.86 LA 0.96 ! NL 1.03 OV 1.01 ! ! ! Correcting IF 6. ! Amplitude normalization factor in sub-array 1: 0.982762 ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.02 HN 1.08 KP 0.96 ! LA 1.01 MK 0.87 NL 1.04 OV 0.97 ! PT 1.03 SC 1.03 ! ! Amplitude normalization factor in sub-array 2: 1.0059 ! Telescope amplitude corrections in sub-array 2: ! BR 0.90 FD 1.09 HN 0.92 LA 1.05 ! NL 0.93 OV 1.07 ! ! ! Correcting IF 7. ! Amplitude normalization factor in sub-array 1: 0.978193 ! Telescope amplitude corrections in sub-array 1: ! BR 1.33 FD 1.08 HN 0.92 KP 0.87 ! LA 0.99 MK 1.06 NL 1.02 OV 1.11 ! PT 0.96 SC 0.87 ! ! Amplitude normalization factor in sub-array 2: 1.0451 ! Telescope amplitude corrections in sub-array 2: ! BR 0.78 FD 0.93 HN 0.95 LA 1.05 ! NL 1.08 OV 0.94 ! ! ! Correcting IF 8. ! Amplitude normalization factor in sub-array 1: 0.9442 ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.03 HN 1.03 KP 0.90 ! LA 1.03 MK 1.02 NL 1.09 OV 1.31 ! PT 1.27 SC 0.85 ! ! Amplitude normalization factor in sub-array 2: 1.0682 ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 0.84 HN 1.02 LA 0.93 ! NL 0.98 OV 0.83 ! ! ! Fit before self-cal, rms=0.035567Jy sigma=0.711705 ! Fit after self-cal, rms=0.035660Jy sigma=0.708827 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.035660Jy sigma=0.708827 ! Fit after self-cal, rms=0.035661Jy sigma=0.708813 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.165 mas, bmaj=2.807 mas, bpa=-3.4 degrees ! Estimated noise=0.236484 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000423668 Jy ! Component: 100 - total flux cleaned = -0.000426203 Jy ! Component: 150 - total flux cleaned = -0.000425958 Jy ! Component: 200 - total flux cleaned = -0.000432628 Jy ! Total flux subtracted in 200 components = -0.000432628 Jy ! Clean residual min=-0.001162 max=0.001467 Jy/beam ! Clean residual mean=-0.000004 rms=0.000325 Jy/beam ! Combined flux in latest and established models = 0.0275504 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 34 components and 0.0275504 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.035659Jy sigma=0.708657 ! Fit after self-cal, rms=0.035659Jy sigma=0.708654 ! Inverting map print "============== Finished amplitude gscale SELF-CAL ==============" ! ============== Finished amplitude gscale SELF-CAL ============== ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.035659Jy sigma=0.708654 ! Fit after self-cal, rms=0.035628Jy sigma=0.707832 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 3.19353e-05 Jy ! Component: 100 - total flux cleaned = 3.1691e-05 Jy ! Component: 150 - total flux cleaned = 2.14161e-05 Jy ! Component: 200 - total flux cleaned = 1.69793e-05 Jy ! Total flux subtracted in 200 components = 1.69793e-05 Jy ! Clean residual min=-0.001176 max=0.001460 Jy/beam ! Clean residual mean=-0.000004 rms=0.000325 Jy/beam ! Combined flux in latest and established models = 0.0275674 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 34 components and 0.0275674 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.035628Jy sigma=0.707802 ! Fit after self-cal, rms=0.035626Jy sigma=0.707737 ! Inverting map print "=== Finished natural weighting clean with shorter phase_soltime " ! === Finished natural weighting clean with shorter phase_soltime ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.165 x 2.807 at -3.4 degrees (North through East) ! Clean map min=-0.0011312 max=0.024974 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "============== Finished amplitude self-cal ==============" end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8069 mas, bmaj=2.072 mas, bpa=-3.418 degrees ! Estimated noise=0.446578 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0195806 Jy ! Component: 100 - total flux cleaned = 0.0237528 Jy ! Component: 150 - total flux cleaned = 0.0256692 Jy ! Component: 200 - total flux cleaned = 0.0266351 Jy ! Total flux subtracted in 200 components = 0.0266351 Jy ! Clean residual min=-0.001542 max=0.001692 Jy/beam ! Clean residual mean=-0.000004 rms=0.000381 Jy/beam ! Combined flux in latest and established models = 0.0266351 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.0266351 Jy ! Inverting map and beam ! Estimated beam: bmin=1.165 mas, bmaj=2.807 mas, bpa=-3.4 degrees ! Estimated noise=0.236484 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-21.4, 20.6). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00169565 Jy ! Component: 100 - total flux cleaned = 0.00261696 Jy ! Component: 150 - total flux cleaned = 0.00323217 Jy ! Component: 200 - total flux cleaned = 0.00358202 Jy ! Total flux subtracted in 200 components = 0.00358202 Jy ! Clean residual min=-0.001085 max=0.001122 Jy/beam ! Clean residual mean=-0.000003 rms=0.000283 Jy/beam ! Combined flux in latest and established models = 0.0302171 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 51 components and 0.0302171 Jy ! Inverting map clean ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000239128 Jy ! Component: 100 - total flux cleaned = 0.000379383 Jy ! Component: 150 - total flux cleaned = 0.000447762 Jy ! Component: 200 - total flux cleaned = 0.000520173 Jy ! Total flux subtracted in 200 components = 0.000520173 Jy ! Clean residual min=-0.001078 max=0.001070 Jy/beam ! Clean residual mean=-0.000003 rms=0.000277 Jy/beam ! Combined flux in latest and established models = 0.0307373 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 64 components and 0.0307373 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.035579Jy sigma=0.706389 ! Fit after self-cal, rms=0.035574Jy sigma=0.706242 wmodel J1413-0710_X_map.mod ! Writing 64 model components to file: J1413-0710_X_map.mod wobs J1413-0710_X_uvs.fits ! Writing UV FITS file: J1413-0710_X_uvs.fits wwins J1413-0710_X_map.win ! wwins: Wrote 2 windows to J1413-0710_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000186679 Jy ! Component: 100 - total flux cleaned = 0.000116151 Jy ! Component: 150 - total flux cleaned = 3.29323e-05 Jy ! Component: 200 - total flux cleaned = -6.21851e-05 Jy ! Component: 250 - total flux cleaned = -0.000167317 Jy ! Component: 300 - total flux cleaned = -0.000252695 Jy ! Component: 350 - total flux cleaned = -0.000347957 Jy ! Component: 400 - total flux cleaned = -0.000387204 Jy ! Component: 450 - total flux cleaned = -0.00042545 Jy ! Component: 500 - total flux cleaned = -0.000450194 Jy ! Component: 550 - total flux cleaned = -0.00048629 Jy ! Component: 600 - total flux cleaned = -0.000555876 Jy ! Component: 650 - total flux cleaned = -0.000612135 Jy ! Component: 700 - total flux cleaned = -0.00066704 Jy ! Component: 750 - total flux cleaned = -0.000742051 Jy ! Component: 800 - total flux cleaned = -0.000794269 Jy ! Component: 850 - total flux cleaned = -0.000845828 Jy ! Component: 900 - total flux cleaned = -0.000945652 Jy ! Component: 950 - total flux cleaned = -0.000974917 Jy ! Component: 1000 - total flux cleaned = -0.00101302 Jy ! Component: 1050 - total flux cleaned = -0.00103167 Jy ! Component: 1100 - total flux cleaned = -0.00106835 Jy ! Component: 1150 - total flux cleaned = -0.00112214 Jy ! Component: 1200 - total flux cleaned = -0.00115722 Jy ! Component: 1250 - total flux cleaned = -0.00120869 Jy ! Component: 1300 - total flux cleaned = -0.00125898 Jy ! Component: 1350 - total flux cleaned = -0.00127544 Jy ! Component: 1400 - total flux cleaned = -0.00128352 Jy ! Component: 1450 - total flux cleaned = -0.00129126 Jy ! Component: 1500 - total flux cleaned = -0.00129116 Jy ! Component: 1550 - total flux cleaned = -0.00128348 Jy ! Component: 1600 - total flux cleaned = -0.00130604 Jy ! Component: 1650 - total flux cleaned = -0.00129106 Jy ! Component: 1700 - total flux cleaned = -0.00131301 Jy ! Component: 1750 - total flux cleaned = -0.00132019 Jy ! Component: 1800 - total flux cleaned = -0.00133433 Jy ! Component: 1850 - total flux cleaned = -0.00134133 Jy ! Component: 1900 - total flux cleaned = -0.00135513 Jy ! Component: 1950 - total flux cleaned = -0.00136178 Jy ! Component: 2000 - total flux cleaned = -0.00133513 Jy ! Component: 2050 - total flux cleaned = -0.00136156 Jy ! Component: 2100 - total flux cleaned = -0.00136804 Jy ! Component: 2150 - total flux cleaned = -0.00139361 Jy ! Component: 2200 - total flux cleaned = -0.00138727 Jy ! Component: 2250 - total flux cleaned = -0.00140599 Jy ! Component: 2300 - total flux cleaned = -0.00139368 Jy ! Component: 2350 - total flux cleaned = -0.00141815 Jy ! Component: 2400 - total flux cleaned = -0.00141813 Jy ! Component: 2450 - total flux cleaned = -0.00143011 Jy ! Component: 2500 - total flux cleaned = -0.00144782 Jy ! Component: 2550 - total flux cleaned = -0.00143616 Jy ! Component: 2600 - total flux cleaned = -0.00144201 Jy ! Component: 2650 - total flux cleaned = -0.00145902 Jy ! Component: 2700 - total flux cleaned = -0.00146458 Jy ! Component: 2750 - total flux cleaned = -0.00146454 Jy ! Component: 2800 - total flux cleaned = -0.00148104 Jy ! Component: 2850 - total flux cleaned = -0.00148112 Jy ! Component: 2900 - total flux cleaned = -0.0014757 Jy ! Component: 2950 - total flux cleaned = -0.00149707 Jy ! Component: 3000 - total flux cleaned = -0.00149178 Jy ! Component: 3050 - total flux cleaned = -0.00150744 Jy ! Component: 3100 - total flux cleaned = -0.00150224 Jy ! Component: 3150 - total flux cleaned = -0.00149708 Jy ! Component: 3200 - total flux cleaned = -0.00147669 Jy ! Component: 3250 - total flux cleaned = -0.00151209 Jy ! Component: 3300 - total flux cleaned = -0.00149709 Jy ! Component: 3350 - total flux cleaned = -0.00151701 Jy ! Component: 3400 - total flux cleaned = -0.0015317 Jy ! Component: 3450 - total flux cleaned = -0.00154144 Jy ! Component: 3500 - total flux cleaned = -0.00152689 Jy ! Component: 3550 - total flux cleaned = -0.0015461 Jy ! Component: 3600 - total flux cleaned = -0.00154612 Jy ! Component: 3650 - total flux cleaned = -0.00157915 Jy ! Component: 3700 - total flux cleaned = -0.00157905 Jy ! Component: 3750 - total flux cleaned = -0.00158374 Jy ! Component: 3800 - total flux cleaned = -0.00159766 Jy ! Component: 3850 - total flux cleaned = -0.00159766 Jy ! Component: 3900 - total flux cleaned = -0.0016113 Jy ! Component: 3950 - total flux cleaned = -0.00159781 Jy ! Component: 4000 - total flux cleaned = -0.0015978 Jy ! Component: 4050 - total flux cleaned = -0.00158447 Jy ! Total flux subtracted in 4096 components = -0.00158003 Jy ! Clean residual min=-0.000271 max=0.000298 Jy/beam ! Clean residual mean=0.000000 rms=0.000081 Jy/beam ! Combined flux in latest and established models = 0.0291573 Jy keep ! Adding 293 model components to the UV plane model. ! The established model now contains 357 components and 0.0291573 Jy ![Exited script file: /opt64/bin/pima_mupet_02.dfm] wmap /vlbi/vcs9/uvm//J1413-0710_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.165 x 2.807 at -3.4 degrees (North through East) ! Clean map min=-0.00066772 max=0.024557 Jy/beam ! Writing clean map to FITS file: /vlbi/vcs9/uvm//J1413-0710_X_a_map.fits wmodel /vlbi/vcs9/uvm//J1413-0710_X_a_map.mod ! Writing 357 model components to file: /vlbi/vcs9/uvm//J1413-0710_X_a_map.mod wobs /vlbi/vcs9/uvm//J1413-0710_X_a_uvs.fits ! Writing UV FITS file: /vlbi/vcs9/uvm//J1413-0710_X_a_uvs.fits wwins /vlbi/vcs9/uvm//J1413-0710_X_a_map.win ! wwins: Wrote 3 windows to /vlbi/vcs9/uvm//J1413-0710_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.024557 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 8.30453e-05 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.01452 1.01452 2.02904 4.05809 8.11618 16.2324 32.4647 64.9294 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0002 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.024 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 295.705 quit ! Quitting program ! Log file /vlbi/vcs9/uvm//J1413-0710_X_a_dfm.log closed on Tue Dec 26 22:35:46 2017