! Started logfile: /vlbi/vcs9/uvm//J1406-273A_X_b_dfm.log on Tue Dec 26 22:35:17 2017
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    7.39200
obs     /vlbi/vcs9/uvm//J1406-273A_X_b_uvm.fits
! Reading UV FITS file: /vlbi/vcs9/uvm//J1406-273A_X_b_uvm.fits
! AN table 1: 180 integrations on 10 of 10 possible baselines.
! AN table 2: 188 integrations on 1 of 1 possible baselines.
! AN table 3: 179 integrations on 6 of 6 possible baselines.
! Apparent sampling: 0.988896 visibilities/baseline/integration-bin.
! Found source: J1406-273A
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 94 lines of history.
! 
! Reading 24224 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_02.dfm J1406-273A_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 60
float amp_soltime2
amp_soltime2 = 5
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.1
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_02.dvm version of 2017.12.26 === "
! === Difmap script: pima_mupet_02.dvm version of 2017.12.26 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.0353738 Jy 
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  A total of 376 telescope corrections were flagged in sub-array 2.
!  A total of 17 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  A total of 376 telescope corrections were flagged in sub-array 2.
!  A total of 17 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  A total of 376 telescope corrections were flagged in sub-array 2.
!  A total of 17 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  A total of 376 telescope corrections were flagged in sub-array 2.
!  A total of 17 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  A total of 376 telescope corrections were flagged in sub-array 2.
!  A total of 17 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  A total of 376 telescope corrections were flagged in sub-array 2.
!  A total of 17 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  A total of 376 telescope corrections were flagged in sub-array 2.
!  A total of 17 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  A total of 376 telescope corrections were flagged in sub-array 2.
!  A total of 17 telescope corrections were flagged in sub-array 3.
! 
! Fit before self-cal, rms=1.000769Jy  sigma=21.810075
! Fit after  self-cal, rms=0.980140Jy  sigma=21.355880
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
peakwin win_mult
! Inverting map and beam 
! Estimated beam: bmin=1.971 mas, bmaj=19.72 mas, bpa=-13.42 degrees
! Estimated noise=0.428583 mJy/beam.
! Added new window around map position (0, 0).
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0175063 Jy
! Component: 100  -  total flux cleaned = 0.0178768 Jy
! Total flux subtracted in 100 components = 0.0178768 Jy
! Clean residual min=-0.001206 max=0.001692 Jy/beam
! Clean residual mean=0.000002 rms=0.000477 Jy/beam
! Combined flux in latest and established models = 0.0178768 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.0178768 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028962Jy  sigma=0.596143
! Fit after  self-cal, rms=0.028959Jy  sigma=0.596073
! Inverting map 
print "============== Finished uniform weighting CLEAN =============="
! ============== Finished uniform weighting CLEAN ============== 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.758 mas, bmaj=18.34 mas, bpa=-14.21 degrees
! Estimated noise=0.215458 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000685138 Jy
! Component: 100  -  total flux cleaned = 0.000774455 Jy
! Component: 150  -  total flux cleaned = 0.000751641 Jy
! Component: 200  -  total flux cleaned = 0.000671947 Jy
! Total flux subtracted in 200 components = 0.000671947 Jy
! Clean residual min=-0.000558 max=0.000802 Jy/beam
! Clean residual mean=0.000002 rms=0.000224 Jy/beam
! Combined flux in latest and established models = 0.0185488 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 49 model components to the UV plane model.
! The established model now contains 55 components and 0.0185488 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028911Jy  sigma=0.594961
! Fit after  self-cal, rms=0.028910Jy  sigma=0.594948
! Inverting map 
print "============== Finished natural weighting CLEAN =============="
! ============== Finished natural weighting CLEAN ============== 
! 
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.975235
!  Telescope amplitude corrections in sub-array 1:
!   KP        1.25     LA        0.85     NL        0.99     OV        1.04     
!   PT        1.00     
! 
!  Amplitude normalization factor in sub-array 2: 1
!  Telescope amplitude corrections in sub-array 2:
!   KP        0.00*    LA        0.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 3.
!  Amplitude normalization factor in sub-array 3: 0.999679
!  Telescope amplitude corrections in sub-array 3:
!   FD        1.05     KP        1.10     LA        0.80     PT        1.05     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.990458
!  Telescope amplitude corrections in sub-array 1:
!   KP        1.02     LA        1.03     NL        0.99     OV        0.95     
!   PT        1.05     
! 
!  Amplitude normalization factor in sub-array 2: 1
!  Telescope amplitude corrections in sub-array 2:
!   KP        0.00*    LA        0.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 3.
!  Amplitude normalization factor in sub-array 3: 0.990731
!  Telescope amplitude corrections in sub-array 3:
!   FD        1.06     KP        0.98     LA        0.90     PT        1.09     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.980681
!  Telescope amplitude corrections in sub-array 1:
!   KP        0.98     LA        1.02     NL        0.97     OV        0.99     
!   PT        1.14     
! 
!  Amplitude normalization factor in sub-array 2: 1
!  Telescope amplitude corrections in sub-array 2:
!   KP        0.00*    LA        0.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 3.
!  Amplitude normalization factor in sub-array 3: 1.00071
!  Telescope amplitude corrections in sub-array 3:
!   FD        0.98     KP        0.93     LA        0.99     PT        1.11     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.970718
!  Telescope amplitude corrections in sub-array 1:
!   KP        1.12     LA        0.95     NL        1.00     OV        1.03     
!   PT        1.04     
! 
!  Amplitude normalization factor in sub-array 2: 1
!  Telescope amplitude corrections in sub-array 2:
!   KP        0.00*    LA        0.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 3.
!  Amplitude normalization factor in sub-array 3: 0.983455
!  Telescope amplitude corrections in sub-array 3:
!   FD        1.10     KP        0.96     LA        0.93     PT        1.07     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.982462
!  Telescope amplitude corrections in sub-array 1:
!   KP        1.00     LA        0.99     NL        0.91     OV        0.97     
!   PT        1.22     
! 
!  Amplitude normalization factor in sub-array 2: 1
!  Telescope amplitude corrections in sub-array 2:
!   KP        0.00*    LA        0.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 3.
!  Amplitude normalization factor in sub-array 3: 0.978361
!  Telescope amplitude corrections in sub-array 3:
!   FD        1.05     KP        0.88     LA        1.05     PT        1.10     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.01182
!  Telescope amplitude corrections in sub-array 1:
!   KP        0.97     LA        0.98     NL        0.96     OV        0.99     
!   PT        1.03     
! 
!  Amplitude normalization factor in sub-array 2: 1
!  Telescope amplitude corrections in sub-array 2:
!   KP        0.00*    LA        0.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 3.
!  Amplitude normalization factor in sub-array 3: 1.00749
!  Telescope amplitude corrections in sub-array 3:
!   FD        0.95     KP        0.92     LA        0.95     PT        1.15     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.0366
!  Telescope amplitude corrections in sub-array 1:
!   KP        0.86     LA        1.04     NL        1.02     OV        0.90     
!   PT        1.00     
! 
!  Amplitude normalization factor in sub-array 2: 1
!  Telescope amplitude corrections in sub-array 2:
!   KP        0.00*    LA        0.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 3.
!  Amplitude normalization factor in sub-array 3: 1.02536
!  Telescope amplitude corrections in sub-array 3:
!   FD        0.97     KP        0.88     LA        0.98     PT        1.08     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.981324
!  Telescope amplitude corrections in sub-array 1:
!   KP        0.90     LA        1.04     NL        1.15     OV        0.83     
!   PT        1.18     
! 
!  Amplitude normalization factor in sub-array 2: 1
!  Telescope amplitude corrections in sub-array 2:
!   KP        0.00*    LA        0.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 3.
!  Amplitude normalization factor in sub-array 3: 0.966654
!  Telescope amplitude corrections in sub-array 3:
!   FD        0.93     KP        1.04     LA        1.08     PT        1.08     
! 
! 
! Fit before self-cal, rms=0.028910Jy  sigma=0.594948
! Fit after  self-cal, rms=0.028525Jy  sigma=0.593663
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028525Jy  sigma=0.593663
! Fit after  self-cal, rms=0.028525Jy  sigma=0.593655
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.72 mas, bmaj=18.16 mas, bpa=-14.12 degrees
! Estimated noise=0.210289 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 6.03168e-05 Jy
! Component: 100  -  total flux cleaned = 0.000231746 Jy
! Component: 150  -  total flux cleaned = 0.000363683 Jy
! Component: 200  -  total flux cleaned = 0.000462041 Jy
! Total flux subtracted in 200 components = 0.000462041 Jy
! Clean residual min=-0.000357 max=0.000303 Jy/beam
! Clean residual mean=0.000002 rms=0.000094 Jy/beam
! Combined flux in latest and established models = 0.0190108 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 69 model components to the UV plane model.
! The established model now contains 121 components and 0.0190108 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028521Jy  sigma=0.593544
! Fit after  self-cal, rms=0.028521Jy  sigma=0.593540
! Inverting map 
print "============== Finished amplitude gscale SELF-CAL =============="
! ============== Finished amplitude gscale SELF-CAL ============== 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028521Jy  sigma=0.593540
! Fit after  self-cal, rms=0.028483Jy  sigma=0.592524
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000117067 Jy
! Component: 100  -  total flux cleaned = 0.000199871 Jy
! Component: 150  -  total flux cleaned = 0.000266964 Jy
! Component: 200  -  total flux cleaned = 0.000318459 Jy
! Total flux subtracted in 200 components = 0.000318459 Jy
! Clean residual min=-0.000340 max=0.000309 Jy/beam
! Clean residual mean=0.000002 rms=0.000089 Jy/beam
! Combined flux in latest and established models = 0.0193293 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 44 model components to the UV plane model.
! The established model now contains 164 components and 0.0193293 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028483Jy  sigma=0.592513
! Fit after  self-cal, rms=0.028481Jy  sigma=0.592417
! Inverting map 
print "=== Finished natural weighting clean with shorter phase_soltime "
! === Finished natural weighting clean with shorter phase_soltime  
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.72 x 18.16 at -14.12 degrees (North through East)
! Clean map  min=-0.00038104  max=0.019847 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "============== Finished amplitude self-cal =============="
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.964 mas, bmaj=19.6 mas, bpa=-13.33 degrees
! Estimated noise=0.423076 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0172284 Jy
! Component: 100  -  total flux cleaned = 0.0179032 Jy
! Component: 150  -  total flux cleaned = 0.0181765 Jy
! Component: 200  -  total flux cleaned = 0.0183911 Jy
! Total flux subtracted in 200 components = 0.0183911 Jy
! Clean residual min=-0.000867 max=0.000925 Jy/beam
! Clean residual mean=0.000003 rms=0.000322 Jy/beam
! Combined flux in latest and established models = 0.0183911 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 40 model components to the UV plane model.
! The established model now contains 40 components and 0.0183911 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.72 mas, bmaj=18.16 mas, bpa=-14.12 degrees
! Estimated noise=0.210289 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000443207 Jy
! Component: 100  -  total flux cleaned = 0.000563641 Jy
! Component: 150  -  total flux cleaned = 0.000663896 Jy
! Component: 200  -  total flux cleaned = 0.000747789 Jy
! Total flux subtracted in 200 components = 0.000747789 Jy
! Clean residual min=-0.000352 max=0.000347 Jy/beam
! Clean residual mean=0.000002 rms=0.000091 Jy/beam
! Combined flux in latest and established models = 0.0191389 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 67 components and 0.0191389 Jy
! Inverting map 
clean
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 4.90603e-05 Jy
! Component: 100  -  total flux cleaned = 7.49854e-05 Jy
! Component: 150  -  total flux cleaned = 9.72806e-05 Jy
! Component: 200  -  total flux cleaned = 0.000107071 Jy
! Total flux subtracted in 200 components = 0.000107071 Jy
! Clean residual min=-0.000335 max=0.000339 Jy/beam
! Clean residual mean=0.000002 rms=0.000089 Jy/beam
! Combined flux in latest and established models = 0.019246 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 33 model components to the UV plane model.
! The established model now contains 89 components and 0.019246 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028482Jy  sigma=0.592419
! Fit after  self-cal, rms=0.028483Jy  sigma=0.592408
wmodel J1406-273A_X_map.mod
! Writing 89 model components to file: J1406-273A_X_map.mod
wobs   J1406-273A_X_uvs.fits
! Writing UV FITS file: J1406-273A_X_uvs.fits
wwins  J1406-273A_X_map.win
! wwins: Wrote 1 windows to J1406-273A_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -1.71015e-05 Jy
! Component: 100  -  total flux cleaned = -7.2314e-06 Jy
! Component: 150  -  total flux cleaned = 2.42734e-05 Jy
! Component: 200  -  total flux cleaned = 4.49194e-05 Jy
! Component: 250  -  total flux cleaned = 2.98922e-05 Jy
! Component: 300  -  total flux cleaned = 1.58357e-05 Jy
! Component: 350  -  total flux cleaned = -6.97128e-07 Jy
! Component: 400  -  total flux cleaned = -2.25962e-05 Jy
! Component: 450  -  total flux cleaned = -3.73861e-05 Jy
! Component: 500  -  total flux cleaned = -5.69141e-05 Jy
! Component: 550  -  total flux cleaned = -6.75052e-05 Jy
! Component: 600  -  total flux cleaned = -8.29677e-05 Jy
! Component: 650  -  total flux cleaned = -0.000105344 Jy
! Component: 700  -  total flux cleaned = -0.000129688 Jy
! Component: 750  -  total flux cleaned = -0.00013209 Jy
! Component: 800  -  total flux cleaned = -0.000132134 Jy
! Component: 850  -  total flux cleaned = -0.000136781 Jy
! Component: 900  -  total flux cleaned = -0.000141354 Jy
! Component: 950  -  total flux cleaned = -0.000148158 Jy
! Component: 1000  -  total flux cleaned = -0.000157141 Jy
! Component: 1050  -  total flux cleaned = -0.00016382 Jy
! Component: 1100  -  total flux cleaned = -0.000174859 Jy
! Component: 1150  -  total flux cleaned = -0.000183636 Jy
! Component: 1200  -  total flux cleaned = -0.000185808 Jy
! Component: 1250  -  total flux cleaned = -0.000196612 Jy
! Component: 1300  -  total flux cleaned = -0.000205192 Jy
! Component: 1350  -  total flux cleaned = -0.000213753 Jy
! Component: 1400  -  total flux cleaned = -0.000228639 Jy
! Component: 1450  -  total flux cleaned = -0.00023923 Jy
! Component: 1500  -  total flux cleaned = -0.000251866 Jy
! Component: 1550  -  total flux cleaned = -0.000262338 Jy
! Component: 1600  -  total flux cleaned = -0.000272785 Jy
! Component: 1650  -  total flux cleaned = -0.000287374 Jy
! Component: 1700  -  total flux cleaned = -0.000306145 Jy
! Component: 1750  -  total flux cleaned = -0.000329032 Jy
! Component: 1800  -  total flux cleaned = -0.000347763 Jy
! Component: 1850  -  total flux cleaned = -0.000370672 Jy
! Component: 1900  -  total flux cleaned = -0.000387343 Jy
! Component: 1950  -  total flux cleaned = -0.000404032 Jy
! Component: 2000  -  total flux cleaned = -0.000422845 Jy
! Component: 2050  -  total flux cleaned = -0.000439583 Jy
! Component: 2100  -  total flux cleaned = -0.000456382 Jy
! Component: 2150  -  total flux cleaned = -0.000475313 Jy
! Component: 2200  -  total flux cleaned = -0.000487967 Jy
! Component: 2250  -  total flux cleaned = -0.000504898 Jy
! Component: 2300  -  total flux cleaned = -0.000519769 Jy
! Component: 2350  -  total flux cleaned = -0.000528294 Jy
! Component: 2400  -  total flux cleaned = -0.000541119 Jy
! Component: 2450  -  total flux cleaned = -0.000551828 Jy
! Component: 2500  -  total flux cleaned = -0.000558304 Jy
! Component: 2550  -  total flux cleaned = -0.000569153 Jy
! Component: 2600  -  total flux cleaned = -0.000577875 Jy
! Component: 2650  -  total flux cleaned = -0.000588817 Jy
! Component: 2700  -  total flux cleaned = -0.000593227 Jy
! Component: 2750  -  total flux cleaned = -0.000604295 Jy
! Component: 2800  -  total flux cleaned = -0.000604287 Jy
! Component: 2850  -  total flux cleaned = -0.000610995 Jy
! Component: 2900  -  total flux cleaned = -0.000615522 Jy
! Component: 2950  -  total flux cleaned = -0.0006178 Jy
! Component: 3000  -  total flux cleaned = -0.000622391 Jy
! Component: 3050  -  total flux cleaned = -0.000627041 Jy
! Component: 3100  -  total flux cleaned = -0.000624696 Jy
! Component: 3150  -  total flux cleaned = -0.000627035 Jy
! Component: 3200  -  total flux cleaned = -0.000631796 Jy
! Component: 3250  -  total flux cleaned = -0.0006294 Jy
! Component: 3300  -  total flux cleaned = -0.000631781 Jy
! Component: 3350  -  total flux cleaned = -0.000631783 Jy
! Component: 3400  -  total flux cleaned = -0.000631783 Jy
! Component: 3450  -  total flux cleaned = -0.000631764 Jy
! Component: 3500  -  total flux cleaned = -0.000626767 Jy
! Component: 3550  -  total flux cleaned = -0.000619142 Jy
! Component: 3600  -  total flux cleaned = -0.000616576 Jy
! Component: 3650  -  total flux cleaned = -0.000611389 Jy
! Component: 3700  -  total flux cleaned = -0.000603518 Jy
! Component: 3750  -  total flux cleaned = -0.000598231 Jy
! Component: 3800  -  total flux cleaned = -0.000587496 Jy
! Component: 3850  -  total flux cleaned = -0.000579286 Jy
! Component: 3900  -  total flux cleaned = -0.00056555 Jy
! Component: 3950  -  total flux cleaned = -0.000557169 Jy
! Component: 4000  -  total flux cleaned = -0.000548714 Jy
! Component: 4050  -  total flux cleaned = -0.000537309 Jy
! Total flux subtracted in 4096 components = -0.000528629 Jy
! Clean residual min=-0.000204 max=0.000162 Jy/beam
! Clean residual mean=-0.000000 rms=0.000059 Jy/beam
! Combined flux in latest and established models = 0.0187174 Jy
keep
! Adding 348 model components to the UV plane model.
! The established model now contains 437 components and 0.0187174 Jy
![Exited script file: /opt64/bin/pima_mupet_02.dfm]
wmap   /vlbi/vcs9/uvm//J1406-273A_X_b_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.72 x 18.16 at -14.12 degrees (North through East)
! Clean map  min=-0.00043449  max=0.019733 Jy/beam
! Writing clean map to FITS file: /vlbi/vcs9/uvm//J1406-273A_X_b_map.fits
wmodel /vlbi/vcs9/uvm//J1406-273A_X_b_map.mod
! Writing 437 model components to file: /vlbi/vcs9/uvm//J1406-273A_X_b_map.mod
wobs   /vlbi/vcs9/uvm//J1406-273A_X_b_uvs.fits
! Writing UV FITS file: /vlbi/vcs9/uvm//J1406-273A_X_b_uvs.fits
wwins  /vlbi/vcs9/uvm//J1406-273A_X_b_map.win
! wwins: Wrote 2 windows to /vlbi/vcs9/uvm//J1406-273A_X_b_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0197335 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 6.45586e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.981458 0.981458 1.96292 3.92583 7.85166 15.7033 31.4066 62.8133
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.019 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  305.667 
quit
! Quitting program
! Log file /vlbi/vcs9/uvm//J1406-273A_X_b_dfm.log closed on Tue Dec 26 22:35:21 2017