! Started logfile: /vlbi/vcs9/uvm//J1406-2736_X_a_dfm.log on Tue Dec 26 22:34:45 2017 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 7.39200 obs /vlbi/vcs9/uvm//J1406-2736_X_a_uvm.fits ! Reading UV FITS file: /vlbi/vcs9/uvm//J1406-2736_X_a_uvm.fits ! AN table 1: 18 integrations on 1 of 1 possible baselines. ! AN table 2: 209 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.817336 visibilities/baseline/integration-bin. ! Found source: J1406-2736 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 7.392e+09 3.2e+07 1 3.2e+07 ! 02 2 7.424e+09 3.2e+07 1 3.2e+07 ! 03 3 7.456e+09 3.2e+07 1 3.2e+07 ! 04 4 7.552e+09 3.2e+07 1 3.2e+07 ! 05 5 7.744e+09 3.2e+07 1 3.2e+07 ! 06 6 7.776e+09 3.2e+07 1 3.2e+07 ! 07 7 7.808e+09 3.2e+07 1 3.2e+07 ! 08 8 7.84e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 94 lines of history. ! ! Reading 28816 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 8 channels. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_02.dfm J1406-2736_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 60 float amp_soltime2 amp_soltime2 = 5 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.1 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_02.dvm version of 2017.12.26 === " ! === Difmap script: pima_mupet_02.dvm version of 2017.12.26 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.03749 Jy startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 36 telescope corrections were flagged in sub-array 1. ! A total of 175 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 36 telescope corrections were flagged in sub-array 1. ! A total of 175 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 36 telescope corrections were flagged in sub-array 1. ! A total of 175 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 36 telescope corrections were flagged in sub-array 1. ! A total of 175 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 36 telescope corrections were flagged in sub-array 1. ! A total of 175 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 36 telescope corrections were flagged in sub-array 1. ! A total of 175 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 36 telescope corrections were flagged in sub-array 1. ! A total of 175 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 36 telescope corrections were flagged in sub-array 1. ! A total of 175 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.000869Jy sigma=20.052034 ! Fit after self-cal, rms=0.982912Jy sigma=19.673909 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. peakwin win_mult ! Inverting map and beam ! Estimated beam: bmin=0.7274 mas, bmaj=8.236 mas, bpa=-28.86 degrees ! Estimated noise=0.617544 mJy/beam. ! Added new window around map position (0, 0). flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0154477 Jy ! Component: 100 - total flux cleaned = 0.0171092 Jy ! Total flux subtracted in 100 components = 0.0171092 Jy ! Clean residual min=-0.001487 max=0.001391 Jy/beam ! Clean residual mean=0.000001 rms=0.000408 Jy/beam ! Combined flux in latest and established models = 0.0171092 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0171092 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.033101Jy sigma=0.643058 ! Fit after self-cal, rms=0.033097Jy sigma=0.642959 ! Inverting map print "============== Finished uniform weighting CLEAN ==============" ! ============== Finished uniform weighting CLEAN ============== ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.098 mas, bmaj=7.966 mas, bpa=-27.77 degrees ! Estimated noise=0.208778 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000400955 Jy ! Component: 100 - total flux cleaned = 0.000406388 Jy ! Component: 150 - total flux cleaned = 0.000320576 Jy ! Component: 200 - total flux cleaned = 0.000224864 Jy ! Total flux subtracted in 200 components = 0.000224864 Jy ! Clean residual min=-0.001184 max=0.001220 Jy/beam ! Clean residual mean=0.000005 rms=0.000351 Jy/beam ! Combined flux in latest and established models = 0.0173341 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 40 components and 0.0173341 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.033084Jy sigma=0.642698 ! Fit after self-cal, rms=0.033084Jy sigma=0.642687 ! Inverting map print "============== Finished natural weighting CLEAN ==============" ! ============== Finished natural weighting CLEAN ============== ! gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! FD 0.00* LA 0.00* ! ! A total of 24 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 0.986109 ! Telescope amplitude corrections in sub-array 2: ! FD 0.95 KP 1.06 LA 0.83 MK 1.01 ! NL 1.09 OV 1.01 PT 1.15 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! FD 0.00* LA 0.00* ! ! A total of 24 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 0.970843 ! Telescope amplitude corrections in sub-array 2: ! FD 1.06 KP 0.95 LA 0.91 MK 1.10 ! NL 0.93 OV 1.05 PT 1.21 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! FD 0.00* LA 0.00* ! ! A total of 24 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 0.983216 ! Telescope amplitude corrections in sub-array 2: ! FD 1.00 KP 0.92 LA 0.95 MK 1.09 ! NL 1.00 OV 1.00 PT 1.17 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! FD 0.00* LA 0.00* ! ! A total of 24 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 0.972276 ! Telescope amplitude corrections in sub-array 2: ! FD 1.02 KP 0.94 LA 0.86 MK 0.94 ! NL 1.19 OV 1.00 PT 1.24 ! ! ! Correcting IF 5. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! FD 0.00* LA 0.00* ! ! A total of 24 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 0.975569 ! Telescope amplitude corrections in sub-array 2: ! FD 1.07 KP 0.85 LA 0.97 MK 1.03 ! NL 0.85 OV 1.04 PT 1.36 ! ! ! Correcting IF 6. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! FD 0.00* LA 0.00* ! ! A total of 24 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 1.00115 ! Telescope amplitude corrections in sub-array 2: ! FD 1.07 KP 0.85 LA 0.90 MK 1.06 ! NL 0.92 OV 0.94 PT 1.27 ! ! ! Correcting IF 7. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! FD 0.00* LA 0.00* ! ! A total of 24 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 1.02813 ! Telescope amplitude corrections in sub-array 2: ! FD 0.99 KP 0.82 LA 0.92 MK 0.96 ! NL 1.01 OV 0.95 PT 1.15 ! ! ! Correcting IF 8. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! FD 0.00* LA 0.00* ! ! A total of 24 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 1.00399 ! Telescope amplitude corrections in sub-array 2: ! FD 1.04 KP 0.87 LA 0.90 MK 0.95 ! NL 1.22 OV 0.85 PT 1.13 ! ! ! Fit before self-cal, rms=0.033084Jy sigma=0.642687 ! Fit after self-cal, rms=0.032520Jy sigma=0.641117 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.032520Jy sigma=0.641117 ! Fit after self-cal, rms=0.032521Jy sigma=0.641112 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.122 mas, bmaj=7.907 mas, bpa=-27.68 degrees ! Estimated noise=0.202228 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -2.11576e-05 Jy ! Component: 100 - total flux cleaned = 0.00012406 Jy ! Component: 150 - total flux cleaned = 0.000195248 Jy ! Component: 200 - total flux cleaned = 0.000218151 Jy ! Total flux subtracted in 200 components = 0.000218151 Jy ! Clean residual min=-0.000535 max=0.000534 Jy/beam ! Clean residual mean=0.000001 rms=0.000138 Jy/beam ! Combined flux in latest and established models = 0.0175523 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 55 components and 0.0175523 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.032516Jy sigma=0.640987 ! Fit after self-cal, rms=0.032516Jy sigma=0.640984 ! Inverting map print "============== Finished amplitude gscale SELF-CAL ==============" ! ============== Finished amplitude gscale SELF-CAL ============== ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.032516Jy sigma=0.640984 ! Fit after self-cal, rms=0.032482Jy sigma=0.640085 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000115736 Jy ! Component: 100 - total flux cleaned = 0.00013926 Jy ! Component: 150 - total flux cleaned = 0.000149419 Jy ! Component: 200 - total flux cleaned = 0.000149109 Jy ! Total flux subtracted in 200 components = 0.000149109 Jy ! Clean residual min=-0.000511 max=0.000495 Jy/beam ! Clean residual mean=0.000001 rms=0.000129 Jy/beam ! Combined flux in latest and established models = 0.0177014 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 63 components and 0.0177014 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.032481Jy sigma=0.640056 ! Fit after self-cal, rms=0.032478Jy sigma=0.639951 ! Inverting map print "=== Finished natural weighting clean with shorter phase_soltime " ! === Finished natural weighting clean with shorter phase_soltime ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.122 x 7.907 at -27.68 degrees (North through East) ! Clean map min=-0.00048727 max=0.0168 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "============== Finished amplitude self-cal ==============" end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7292 mas, bmaj=8.208 mas, bpa=-28.92 degrees ! Estimated noise=0.611171 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0149351 Jy ! Component: 100 - total flux cleaned = 0.0168566 Jy ! Component: 150 - total flux cleaned = 0.0173498 Jy ! Component: 200 - total flux cleaned = 0.0174431 Jy ! Total flux subtracted in 200 components = 0.0174431 Jy ! Clean residual min=-0.001132 max=0.001000 Jy/beam ! Clean residual mean=0.000000 rms=0.000293 Jy/beam ! Combined flux in latest and established models = 0.0174431 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.0174431 Jy ! Inverting map and beam ! Estimated beam: bmin=1.122 mas, bmaj=7.907 mas, bpa=-27.68 degrees ! Estimated noise=0.202228 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000460809 Jy ! Component: 100 - total flux cleaned = 0.000586147 Jy ! Component: 150 - total flux cleaned = 0.000604648 Jy ! Component: 200 - total flux cleaned = 0.000604411 Jy ! Total flux subtracted in 200 components = 0.000604411 Jy ! Clean residual min=-0.000495 max=0.000447 Jy/beam ! Clean residual mean=0.000002 rms=0.000130 Jy/beam ! Combined flux in latest and established models = 0.0180475 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 46 components and 0.0180475 Jy ! Inverting map clean ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -6.92609e-06 Jy ! Component: 100 - total flux cleaned = -1.32877e-05 Jy ! Component: 150 - total flux cleaned = -1.3437e-05 Jy ! Component: 200 - total flux cleaned = -1.86261e-05 Jy ! Total flux subtracted in 200 components = -1.86261e-05 Jy ! Clean residual min=-0.000481 max=0.000445 Jy/beam ! Clean residual mean=0.000002 rms=0.000126 Jy/beam ! Combined flux in latest and established models = 0.0180289 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 58 components and 0.0180289 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.032479Jy sigma=0.639955 ! Fit after self-cal, rms=0.032479Jy sigma=0.639918 wmodel J1406-2736_X_map.mod ! Writing 58 model components to file: J1406-2736_X_map.mod wobs J1406-2736_X_uvs.fits ! Writing UV FITS file: J1406-2736_X_uvs.fits wwins J1406-2736_X_map.win ! wwins: Wrote 1 windows to J1406-2736_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000114466 Jy ! Component: 100 - total flux cleaned = -0.000100692 Jy ! Component: 150 - total flux cleaned = -4.62672e-05 Jy ! Component: 200 - total flux cleaned = -3.33039e-05 Jy ! Component: 250 - total flux cleaned = -8.88664e-06 Jy ! Component: 300 - total flux cleaned = 2.88645e-06 Jy ! Component: 350 - total flux cleaned = 1.97477e-05 Jy ! Component: 400 - total flux cleaned = 4.68386e-05 Jy ! Component: 450 - total flux cleaned = 6.78196e-05 Jy ! Component: 500 - total flux cleaned = 0.000103604 Jy ! Component: 550 - total flux cleaned = 0.000158406 Jy ! Component: 600 - total flux cleaned = 0.00020213 Jy ! Component: 650 - total flux cleaned = 0.000249661 Jy ! Component: 700 - total flux cleaned = 0.000291625 Jy ! Component: 750 - total flux cleaned = 0.000337226 Jy ! Component: 800 - total flux cleaned = 0.000373077 Jy ! Component: 850 - total flux cleaned = 0.000412662 Jy ! Component: 900 - total flux cleaned = 0.000442796 Jy ! Component: 950 - total flux cleaned = 0.00048081 Jy ! Component: 1000 - total flux cleaned = 0.00050567 Jy ! Component: 1050 - total flux cleaned = 0.000530138 Jy ! Component: 1100 - total flux cleaned = 0.000554247 Jy ! Component: 1150 - total flux cleaned = 0.00057006 Jy ! Component: 1200 - total flux cleaned = 0.000585581 Jy ! Component: 1250 - total flux cleaned = 0.000589361 Jy ! Component: 1300 - total flux cleaned = 0.00059689 Jy ! Component: 1350 - total flux cleaned = 0.000604299 Jy ! Component: 1400 - total flux cleaned = 0.000604276 Jy ! Component: 1450 - total flux cleaned = 0.0006189 Jy ! Component: 1500 - total flux cleaned = 0.000615322 Jy ! Component: 1550 - total flux cleaned = 0.000618901 Jy ! Component: 1600 - total flux cleaned = 0.000604761 Jy ! Component: 1650 - total flux cleaned = 0.000597772 Jy ! Component: 1700 - total flux cleaned = 0.000590859 Jy ! Component: 1750 - total flux cleaned = 0.000594236 Jy ! Component: 1800 - total flux cleaned = 0.000577218 Jy ! Component: 1850 - total flux cleaned = 0.00057387 Jy ! Component: 1900 - total flux cleaned = 0.000560517 Jy ! Component: 1950 - total flux cleaned = 0.000560516 Jy ! Component: 2000 - total flux cleaned = 0.000550635 Jy ! Component: 2050 - total flux cleaned = 0.000547346 Jy ! Component: 2100 - total flux cleaned = 0.000544104 Jy ! Component: 2150 - total flux cleaned = 0.000547377 Jy ! Component: 2200 - total flux cleaned = 0.000553835 Jy ! Component: 2250 - total flux cleaned = 0.000553811 Jy ! Component: 2300 - total flux cleaned = 0.000556993 Jy ! Component: 2350 - total flux cleaned = 0.000553793 Jy ! Component: 2400 - total flux cleaned = 0.000553796 Jy ! Component: 2450 - total flux cleaned = 0.000556987 Jy ! Component: 2500 - total flux cleaned = 0.000553852 Jy ! Component: 2550 - total flux cleaned = 0.000553849 Jy ! Component: 2600 - total flux cleaned = 0.000560074 Jy ! Component: 2650 - total flux cleaned = 0.00056008 Jy ! Component: 2700 - total flux cleaned = 0.00055383 Jy ! Component: 2750 - total flux cleaned = 0.000566266 Jy ! Component: 2800 - total flux cleaned = 0.000563151 Jy ! Component: 2850 - total flux cleaned = 0.00056315 Jy ! Component: 2900 - total flux cleaned = 0.000560073 Jy ! Component: 2950 - total flux cleaned = 0.000560075 Jy ! Component: 3000 - total flux cleaned = 0.000563173 Jy ! Component: 3050 - total flux cleaned = 0.000569363 Jy ! Component: 3100 - total flux cleaned = 0.000569372 Jy ! Component: 3150 - total flux cleaned = 0.000572468 Jy ! Component: 3200 - total flux cleaned = 0.000569363 Jy ! Component: 3250 - total flux cleaned = 0.000569318 Jy ! Component: 3300 - total flux cleaned = 0.00057864 Jy ! Component: 3350 - total flux cleaned = 0.000575521 Jy ! Component: 3400 - total flux cleaned = 0.000581774 Jy ! Component: 3450 - total flux cleaned = 0.000584896 Jy ! Component: 3500 - total flux cleaned = 0.000588034 Jy ! Component: 3550 - total flux cleaned = 0.00059432 Jy ! Component: 3600 - total flux cleaned = 0.000597474 Jy ! Component: 3650 - total flux cleaned = 0.000600621 Jy ! Component: 3700 - total flux cleaned = 0.000610145 Jy ! Component: 3750 - total flux cleaned = 0.00061652 Jy ! Component: 3800 - total flux cleaned = 0.000626105 Jy ! Component: 3850 - total flux cleaned = 0.000626138 Jy ! Component: 3900 - total flux cleaned = 0.000632568 Jy ! Component: 3950 - total flux cleaned = 0.000635769 Jy ! Component: 4000 - total flux cleaned = 0.000648744 Jy ! Component: 4050 - total flux cleaned = 0.000655259 Jy ! Total flux subtracted in 4096 components = 0.00066182 Jy ! Clean residual min=-0.000194 max=0.000192 Jy/beam ! Clean residual mean=0.000001 rms=0.000057 Jy/beam ! Combined flux in latest and established models = 0.0186907 Jy keep ! Adding 239 model components to the UV plane model. ! The established model now contains 297 components and 0.0186907 Jy ![Exited script file: /opt64/bin/pima_mupet_02.dfm] wmap /vlbi/vcs9/uvm//J1406-2736_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.122 x 7.907 at -27.68 degrees (North through East) ! Clean map min=-0.00040148 max=0.01664 Jy/beam ! Writing clean map to FITS file: /vlbi/vcs9/uvm//J1406-2736_X_a_map.fits wmodel /vlbi/vcs9/uvm//J1406-2736_X_a_map.mod ! Writing 297 model components to file: /vlbi/vcs9/uvm//J1406-2736_X_a_map.mod wobs /vlbi/vcs9/uvm//J1406-2736_X_a_uvs.fits ! Writing UV FITS file: /vlbi/vcs9/uvm//J1406-2736_X_a_uvs.fits wwins /vlbi/vcs9/uvm//J1406-2736_X_a_map.win ! wwins: Wrote 2 windows to /vlbi/vcs9/uvm//J1406-2736_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0166397 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 6.07634e-05 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.09552 1.09552 2.19103 4.38206 8.76412 17.5282 35.0565 70.113 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0001 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.016 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 273.843 quit ! Quitting program ! Log file /vlbi/vcs9/uvm//J1406-2736_X_a_dfm.log closed on Tue Dec 26 22:34:49 2017