! Started logfile: /vlbi/vcs9/uvm//J1354-2443_X_a_dfm.log on Tue Dec 26 22:33:18 2017 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 7.39200 obs /vlbi/vcs9/uvm//J1354-2443_X_a_uvm.fits ! Reading UV FITS file: /vlbi/vcs9/uvm//J1354-2443_X_a_uvm.fits ! AN table 1: 35 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.994286 visibilities/baseline/integration-bin. ! Found source: J1354-2443 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 7.392e+09 3.2e+07 1 3.2e+07 ! 02 2 7.424e+09 3.2e+07 1 3.2e+07 ! 03 3 7.456e+09 3.2e+07 1 3.2e+07 ! 04 4 7.552e+09 3.2e+07 1 3.2e+07 ! 05 5 7.744e+09 3.2e+07 1 3.2e+07 ! 06 6 7.776e+09 3.2e+07 1 3.2e+07 ! 07 7 7.808e+09 3.2e+07 1 3.2e+07 ! 08 8 7.84e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 94 lines of history. ! ! Reading 12528 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 8 channels. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_02.dfm J1354-2443_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 60 float amp_soltime2 amp_soltime2 = 5 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.1 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_02.dvm version of 2017.12.26 === " ! === Difmap script: pima_mupet_02.dvm version of 2017.12.26 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.0513516 Jy startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.000770Jy sigma=19.679311 ! Fit after self-cal, rms=0.970340Jy sigma=19.064267 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. peakwin win_mult ! Inverting map and beam ! Estimated beam: bmin=0.733 mas, bmaj=1.99 mas, bpa=-8.607 degrees ! Estimated noise=0.592276 mJy/beam. ! Added new window around map position (0, 0). flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0255836 Jy ! Component: 100 - total flux cleaned = 0.0304523 Jy ! Total flux subtracted in 100 components = 0.0304523 Jy ! Clean residual min=-0.002170 max=0.002041 Jy/beam ! Clean residual mean=0.000002 rms=0.000537 Jy/beam ! Combined flux in latest and established models = 0.0304523 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0304523 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.041218Jy sigma=0.724934 ! Fit after self-cal, rms=0.041201Jy sigma=0.724358 ! Inverting map print "============== Finished uniform weighting CLEAN ==============" ! ============== Finished uniform weighting CLEAN ============== ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9864 mas, bmaj=2.487 mas, bpa=-6.192 degrees ! Estimated noise=0.321271 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00223112 Jy ! Component: 100 - total flux cleaned = 0.00278019 Jy ! Component: 150 - total flux cleaned = 0.00284952 Jy ! Component: 200 - total flux cleaned = 0.00290119 Jy ! Total flux subtracted in 200 components = 0.00290119 Jy ! Clean residual min=-0.000941 max=0.000953 Jy/beam ! Clean residual mean=0.000004 rms=0.000243 Jy/beam ! Combined flux in latest and established models = 0.0333535 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 20 components and 0.0333535 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.041137Jy sigma=0.722628 ! Fit after self-cal, rms=0.041137Jy sigma=0.722622 ! Inverting map print "============== Finished natural weighting CLEAN ==============" ! ============== Finished natural weighting CLEAN ============== ! gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.98133 ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.08 HN 1.21 KP 1.03 ! LA 0.98 MK 1.01 NL 0.98 OV 1.05 ! PT 1.03 SC 0.92 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.00295 ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.97 HN 1.06 KP 0.93 ! LA 1.04 MK 0.93 NL 0.98 OV 1.11 ! PT 0.94 SC 0.95 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.99153 ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.95 HN 0.98 KP 1.01 ! LA 1.01 MK 1.02 NL 1.07 OV 0.93 ! PT 1.08 SC 1.00 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.997282 ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.96 HN 1.13 KP 0.94 ! LA 0.92 MK 0.93 NL 1.04 OV 1.10 ! PT 0.96 SC 0.99 ! ! ! Correcting IF 5. ! Amplitude normalization factor in sub-array 1: 0.990703 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00 HN 1.07 KP 0.95 ! LA 0.97 MK 0.98 NL 1.01 OV 0.99 ! PT 1.07 SC 1.02 ! ! ! Correcting IF 6. ! Amplitude normalization factor in sub-array 1: 0.997311 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.92 HN 0.94 KP 1.06 ! LA 1.02 MK 0.99 NL 0.98 OV 1.02 ! PT 1.04 SC 1.04 ! ! ! Correcting IF 7. ! Amplitude normalization factor in sub-array 1: 1.00641 ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.98 HN 0.97 KP 0.96 ! LA 0.96 MK 1.00 NL 1.13 OV 1.01 ! PT 0.89 SC 0.96 ! ! ! Correcting IF 8. ! Amplitude normalization factor in sub-array 1: 0.990593 ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.99 HN 1.04 KP 0.89 ! LA 1.09 MK 0.99 NL 1.09 OV 0.89 ! PT 1.01 SC 0.98 ! ! ! Fit before self-cal, rms=0.041137Jy sigma=0.722622 ! Fit after self-cal, rms=0.041476Jy sigma=0.721087 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.041476Jy sigma=0.721087 ! Fit after self-cal, rms=0.041478Jy sigma=0.721079 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9779 mas, bmaj=2.47 mas, bpa=-6.048 degrees ! Estimated noise=0.315363 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000322792 Jy ! Component: 100 - total flux cleaned = -0.000322995 Jy ! Component: 150 - total flux cleaned = -0.000332231 Jy ! Component: 200 - total flux cleaned = -0.000340964 Jy ! Total flux subtracted in 200 components = -0.000340964 Jy ! Clean residual min=-0.000890 max=0.000893 Jy/beam ! Clean residual mean=0.000002 rms=0.000229 Jy/beam ! Combined flux in latest and established models = 0.0330125 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 26 components and 0.0330125 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.041474Jy sigma=0.720985 ! Fit after self-cal, rms=0.041474Jy sigma=0.720983 ! Inverting map print "============== Finished amplitude gscale SELF-CAL ==============" ! ============== Finished amplitude gscale SELF-CAL ============== ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.041474Jy sigma=0.720983 ! Fit after self-cal, rms=0.041446Jy sigma=0.720152 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 5.72585e-05 Jy ! Component: 100 - total flux cleaned = 4.94154e-05 Jy ! Component: 150 - total flux cleaned = 4.27046e-05 Jy ! Component: 200 - total flux cleaned = 4.26153e-05 Jy ! Total flux subtracted in 200 components = 4.26153e-05 Jy ! Clean residual min=-0.000900 max=0.000900 Jy/beam ! Clean residual mean=0.000002 rms=0.000229 Jy/beam ! Combined flux in latest and established models = 0.0330551 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 5 model components to the UV plane model. ! The established model now contains 26 components and 0.0330551 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.041444Jy sigma=0.720114 ! Fit after self-cal, rms=0.041443Jy sigma=0.720014 ! Inverting map print "=== Finished natural weighting clean with shorter phase_soltime " ! === Finished natural weighting clean with shorter phase_soltime ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9779 x 2.47 at -6.048 degrees (North through East) ! Clean map min=-0.00084467 max=0.029566 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "============== Finished amplitude self-cal ==============" end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7292 mas, bmaj=1.98 mas, bpa=-8.529 degrees ! Estimated noise=0.584923 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0253126 Jy ! Component: 100 - total flux cleaned = 0.0302473 Jy ! Component: 150 - total flux cleaned = 0.0318722 Jy ! Component: 200 - total flux cleaned = 0.0322228 Jy ! Total flux subtracted in 200 components = 0.0322228 Jy ! Clean residual min=-0.002005 max=0.002025 Jy/beam ! Clean residual mean=0.000000 rms=0.000496 Jy/beam ! Combined flux in latest and established models = 0.0322228 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.0322228 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9779 mas, bmaj=2.47 mas, bpa=-6.048 degrees ! Estimated noise=0.315363 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000596696 Jy ! Component: 100 - total flux cleaned = 0.000665816 Jy ! Component: 150 - total flux cleaned = 0.000700888 Jy ! Component: 200 - total flux cleaned = 0.000711129 Jy ! Total flux subtracted in 200 components = 0.000711129 Jy ! Clean residual min=-0.000902 max=0.000906 Jy/beam ! Clean residual mean=0.000002 rms=0.000232 Jy/beam ! Combined flux in latest and established models = 0.0329339 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 33 components and 0.0329339 Jy ! Inverting map clean ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.90782e-05 Jy ! Component: 100 - total flux cleaned = 2.81744e-05 Jy ! Component: 150 - total flux cleaned = 3.64001e-05 Jy ! Component: 200 - total flux cleaned = 4.36584e-05 Jy ! Total flux subtracted in 200 components = 4.36584e-05 Jy ! Clean residual min=-0.000897 max=0.000897 Jy/beam ! Clean residual mean=0.000002 rms=0.000230 Jy/beam ! Combined flux in latest and established models = 0.0329775 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 37 components and 0.0329776 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.041443Jy sigma=0.720052 ! Fit after self-cal, rms=0.041446Jy sigma=0.720052 wmodel J1354-2443_X_map.mod ! Writing 37 model components to file: J1354-2443_X_map.mod wobs J1354-2443_X_uvs.fits ! Writing UV FITS file: J1354-2443_X_uvs.fits wwins J1354-2443_X_map.win ! wwins: Wrote 1 windows to J1354-2443_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000100895 Jy ! Component: 100 - total flux cleaned = 0.000211099 Jy ! Component: 150 - total flux cleaned = 0.000211625 Jy ! Component: 200 - total flux cleaned = 0.000211951 Jy ! Component: 250 - total flux cleaned = 0.000170489 Jy ! Component: 300 - total flux cleaned = 0.00011665 Jy ! Component: 350 - total flux cleaned = 5.13286e-05 Jy ! Component: 400 - total flux cleaned = 1.31767e-05 Jy ! Component: 450 - total flux cleaned = -3.6545e-05 Jy ! Component: 500 - total flux cleaned = -4.86445e-05 Jy ! Component: 550 - total flux cleaned = -4.86105e-05 Jy ! Component: 600 - total flux cleaned = -7.20152e-05 Jy ! Component: 650 - total flux cleaned = -7.18271e-05 Jy ! Component: 700 - total flux cleaned = -7.16856e-05 Jy ! Component: 750 - total flux cleaned = -7.16427e-05 Jy ! Component: 800 - total flux cleaned = -6.05358e-05 Jy ! Component: 850 - total flux cleaned = -7.12582e-05 Jy ! Component: 900 - total flux cleaned = -8.17401e-05 Jy ! Component: 950 - total flux cleaned = -8.17333e-05 Jy ! Component: 1000 - total flux cleaned = -8.17826e-05 Jy ! Component: 1050 - total flux cleaned = -0.000112347 Jy ! Component: 1100 - total flux cleaned = -0.00012247 Jy ! Component: 1150 - total flux cleaned = -0.000172333 Jy ! Component: 1200 - total flux cleaned = -0.00023134 Jy ! Component: 1250 - total flux cleaned = -0.000260455 Jy ! Component: 1300 - total flux cleaned = -0.000298905 Jy ! Component: 1350 - total flux cleaned = -0.000355991 Jy ! Component: 1400 - total flux cleaned = -0.00042159 Jy ! Component: 1450 - total flux cleaned = -0.00042164 Jy ! Component: 1500 - total flux cleaned = -0.000449113 Jy ! Component: 1550 - total flux cleaned = -0.000503435 Jy ! Component: 1600 - total flux cleaned = -0.000512373 Jy ! Component: 1650 - total flux cleaned = -0.000565687 Jy ! Component: 1700 - total flux cleaned = -0.000600836 Jy ! Component: 1750 - total flux cleaned = -0.000635762 Jy ! Component: 1800 - total flux cleaned = -0.000644426 Jy ! Component: 1850 - total flux cleaned = -0.000652984 Jy ! Component: 1900 - total flux cleaned = -0.000653217 Jy ! Component: 1950 - total flux cleaned = -0.000686846 Jy ! Component: 2000 - total flux cleaned = -0.000670286 Jy ! Component: 2050 - total flux cleaned = -0.000694958 Jy ! Component: 2100 - total flux cleaned = -0.000670444 Jy ! Component: 2150 - total flux cleaned = -0.000702742 Jy ! Component: 2200 - total flux cleaned = -0.000718844 Jy ! Component: 2250 - total flux cleaned = -0.00071881 Jy ! Component: 2300 - total flux cleaned = -0.000702967 Jy ! Component: 2350 - total flux cleaned = -0.000695098 Jy ! Component: 2400 - total flux cleaned = -0.000718425 Jy ! Component: 2450 - total flux cleaned = -0.000687539 Jy ! Component: 2500 - total flux cleaned = -0.000695239 Jy ! Component: 2550 - total flux cleaned = -0.000679993 Jy ! Component: 2600 - total flux cleaned = -0.000695061 Jy ! Component: 2650 - total flux cleaned = -0.00068007 Jy ! Component: 2700 - total flux cleaned = -0.000665173 Jy ! Component: 2750 - total flux cleaned = -0.000650428 Jy ! Component: 2800 - total flux cleaned = -0.000665086 Jy ! Component: 2850 - total flux cleaned = -0.000657843 Jy ! Component: 2900 - total flux cleaned = -0.000650658 Jy ! Component: 2950 - total flux cleaned = -0.000650601 Jy ! Component: 3000 - total flux cleaned = -0.000643586 Jy ! Component: 3050 - total flux cleaned = -0.000636548 Jy ! Component: 3100 - total flux cleaned = -0.000657749 Jy ! Component: 3150 - total flux cleaned = -0.000650731 Jy ! Component: 3200 - total flux cleaned = -0.000629827 Jy ! Component: 3250 - total flux cleaned = -0.000629842 Jy ! Component: 3300 - total flux cleaned = -0.000629879 Jy ! Component: 3350 - total flux cleaned = -0.000629909 Jy ! Component: 3400 - total flux cleaned = -0.000657039 Jy ! Component: 3450 - total flux cleaned = -0.000657075 Jy ! Component: 3500 - total flux cleaned = -0.000630316 Jy ! Component: 3550 - total flux cleaned = -0.000650301 Jy ! Component: 3600 - total flux cleaned = -0.000683396 Jy ! Component: 3650 - total flux cleaned = -0.000683387 Jy ! Component: 3700 - total flux cleaned = -0.000676883 Jy ! Component: 3750 - total flux cleaned = -0.000689949 Jy ! Component: 3800 - total flux cleaned = -0.000702955 Jy ! Component: 3850 - total flux cleaned = -0.00075439 Jy ! Component: 3900 - total flux cleaned = -0.000715918 Jy ! Component: 3950 - total flux cleaned = -0.000747687 Jy ! Component: 4000 - total flux cleaned = -0.000760313 Jy ! Component: 4050 - total flux cleaned = -0.000772884 Jy ! Total flux subtracted in 4096 components = -0.000785377 Jy ! Clean residual min=-0.000347 max=0.000377 Jy/beam ! Clean residual mean=0.000001 rms=0.000108 Jy/beam ! Combined flux in latest and established models = 0.0321922 Jy keep ! Adding 280 model components to the UV plane model. ! The established model now contains 317 components and 0.0321922 Jy ![Exited script file: /opt64/bin/pima_mupet_02.dfm] wmap /vlbi/vcs9/uvm//J1354-2443_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9779 x 2.47 at -6.048 degrees (North through East) ! Clean map min=-0.0006329 max=0.029498 Jy/beam ! Writing clean map to FITS file: /vlbi/vcs9/uvm//J1354-2443_X_a_map.fits wmodel /vlbi/vcs9/uvm//J1354-2443_X_a_map.mod ! Writing 317 model components to file: /vlbi/vcs9/uvm//J1354-2443_X_a_map.mod wobs /vlbi/vcs9/uvm//J1354-2443_X_a_uvs.fits ! Writing UV FITS file: /vlbi/vcs9/uvm//J1354-2443_X_a_uvs.fits wwins /vlbi/vcs9/uvm//J1354-2443_X_a_map.win ! wwins: Wrote 2 windows to /vlbi/vcs9/uvm//J1354-2443_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0294979 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000107001 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.08823 1.08823 2.17646 4.35292 8.70584 17.4117 34.8233 69.6467 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.029 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 275.677 quit ! Quitting program ! Log file /vlbi/vcs9/uvm//J1354-2443_X_a_dfm.log closed on Tue Dec 26 22:33:21 2017