! Started logfile: /vlbi/vcs9/uvm//J1354-2443_C_a_dfm.log on Tue Dec 26 22:33:14 2017 float field_size field_size = 1024 float field_cell field_cell = 0.3000 float taper_size taper_size = 40.0 float freq freq = 4.12800 obs /vlbi/vcs9/uvm//J1354-2443_C_a_uvm.fits ! Reading UV FITS file: /vlbi/vcs9/uvm//J1354-2443_C_a_uvm.fits ! AN table 1: 35 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.994286 visibilities/baseline/integration-bin. ! Found source: J1354-2443 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 4.128e+09 3.2e+07 1 3.2e+07 ! 02 2 4.16e+09 3.2e+07 1 3.2e+07 ! 03 3 4.192e+09 3.2e+07 1 3.2e+07 ! 04 4 4.224e+09 3.2e+07 1 3.2e+07 ! 05 5 4.416e+09 3.2e+07 1 3.2e+07 ! 06 6 4.512e+09 3.2e+07 1 3.2e+07 ! 07 7 4.544e+09 3.2e+07 1 3.2e+07 ! 08 8 4.576e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 94 lines of history. ! ! Reading 12528 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 8 channels. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.3 print "taper_size =", taper_size ! taper_size = 40 ![@/opt64/bin/pima_mupet_02.dfm J1354-2443_C] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 60 float amp_soltime2 amp_soltime2 = 5 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.1 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_02.dvm version of 2017.12.26 === " ! === Difmap script: pima_mupet_02.dvm version of 2017.12.26 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.0486027 Jy startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.000449Jy sigma=22.531452 ! Fit after self-cal, rms=0.969339Jy sigma=21.823842 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. peakwin win_mult ! Inverting map and beam ! Estimated beam: bmin=1.253 mas, bmaj=3.428 mas, bpa=-8.649 degrees ! Estimated noise=0.463115 mJy/beam. ! Added new window around map position (0, 0). flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0260798 Jy ! Component: 100 - total flux cleaned = 0.0316995 Jy ! Total flux subtracted in 100 components = 0.0316995 Jy ! Clean residual min=-0.001606 max=0.001977 Jy/beam ! Clean residual mean=0.000001 rms=0.000409 Jy/beam ! Combined flux in latest and established models = 0.0316995 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0316995 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.036945Jy sigma=0.713046 ! Fit after self-cal, rms=0.036923Jy sigma=0.712376 ! Inverting map print "============== Finished uniform weighting CLEAN ==============" ! ============== Finished uniform weighting CLEAN ============== ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.726 mas, bmaj=4.388 mas, bpa=-4.057 degrees ! Estimated noise=0.280342 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00231412 Jy ! Component: 100 - total flux cleaned = 0.00308267 Jy ! Component: 150 - total flux cleaned = 0.00327711 Jy ! Component: 200 - total flux cleaned = 0.00332684 Jy ! Total flux subtracted in 200 components = 0.00332684 Jy ! Clean residual min=-0.000942 max=0.000959 Jy/beam ! Clean residual mean=0.000001 rms=0.000247 Jy/beam ! Combined flux in latest and established models = 0.0350263 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 25 components and 0.0350263 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.036824Jy sigma=0.709945 ! Fit after self-cal, rms=0.036823Jy sigma=0.709922 ! Inverting map print "============== Finished natural weighting CLEAN ==============" ! ============== Finished natural weighting CLEAN ============== ! gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00367 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.99 HN 1.05 KP 0.95 ! LA 1.07 MK 0.85 NL 1.08 OV 1.01 ! PT 1.01 SC 0.96 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.01121 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.93 HN 0.98 KP 1.03 ! LA 1.02 MK 0.98 NL 0.94 OV 0.97 ! PT 0.99 SC 1.04 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.964493 ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.07 HN 1.08 KP 1.01 ! LA 1.09 MK 1.11 NL 1.01 OV 0.98 ! PT 1.07 SC 0.91 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.985479 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.94 HN 1.01 KP 1.08 ! LA 1.02 MK 1.14 NL 1.09 OV 0.92 ! PT 0.92 SC 1.03 ! ! ! Correcting IF 5. ! Amplitude normalization factor in sub-array 1: 1.00134 ! Telescope amplitude corrections in sub-array 1: ! BR 0.70 FD 1.06 HN 1.17 KP 1.05 ! LA 0.99 MK 1.00 NL 1.03 OV 1.00 ! PT 0.97 SC 1.01 ! ! ! Correcting IF 6. ! Amplitude normalization factor in sub-array 1: 1.00983 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.95 HN 1.13 KP 0.98 ! LA 0.98 MK 0.91 NL 0.92 OV 1.05 ! PT 1.04 SC 0.99 ! ! ! Correcting IF 7. ! Amplitude normalization factor in sub-array 1: 0.978558 ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.96 HN 1.12 KP 0.96 ! LA 0.95 MK 1.09 NL 0.99 OV 0.98 ! PT 1.11 SC 0.97 ! ! ! Correcting IF 8. ! Amplitude normalization factor in sub-array 1: 1.00485 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 HN 1.00 KP 1.04 ! LA 0.99 MK 0.93 NL 0.97 OV 1.00 ! PT 0.94 SC 1.09 ! ! ! Fit before self-cal, rms=0.036823Jy sigma=0.709922 ! Fit after self-cal, rms=0.036391Jy sigma=0.707846 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.036391Jy sigma=0.707846 ! Fit after self-cal, rms=0.036393Jy sigma=0.707832 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.73 mas, bmaj=4.369 mas, bpa=-4.073 degrees ! Estimated noise=0.27654 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000340009 Jy ! Component: 100 - total flux cleaned = -0.000379091 Jy ! Component: 150 - total flux cleaned = -0.000389547 Jy ! Component: 200 - total flux cleaned = -0.000398555 Jy ! Total flux subtracted in 200 components = -0.000398555 Jy ! Clean residual min=-0.000908 max=0.000945 Jy/beam ! Clean residual mean=0.000001 rms=0.000231 Jy/beam ! Combined flux in latest and established models = 0.0346277 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 36 components and 0.0346277 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.036391Jy sigma=0.707764 ! Fit after self-cal, rms=0.036391Jy sigma=0.707761 ! Inverting map print "============== Finished amplitude gscale SELF-CAL ==============" ! ============== Finished amplitude gscale SELF-CAL ============== ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.036391Jy sigma=0.707761 ! Fit after self-cal, rms=0.036364Jy sigma=0.707044 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 3.67414e-05 Jy ! Component: 100 - total flux cleaned = 3.27515e-05 Jy ! Component: 150 - total flux cleaned = 2.85975e-05 Jy ! Component: 200 - total flux cleaned = 2.09179e-05 Jy ! Total flux subtracted in 200 components = 2.09179e-05 Jy ! Clean residual min=-0.000925 max=0.000950 Jy/beam ! Clean residual mean=0.000001 rms=0.000230 Jy/beam ! Combined flux in latest and established models = 0.0346487 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 39 components and 0.0346487 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.036363Jy sigma=0.707024 ! Fit after self-cal, rms=0.036361Jy sigma=0.706937 ! Inverting map print "=== Finished natural weighting clean with shorter phase_soltime " ! === Finished natural weighting clean with shorter phase_soltime ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.73 x 4.369 at -4.073 degrees (North through East) ! Clean map min=-0.00089207 max=0.030174 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "============== Finished amplitude self-cal ==============" end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.255 mas, bmaj=3.414 mas, bpa=-8.675 degrees ! Estimated noise=0.46078 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0260065 Jy ! Component: 100 - total flux cleaned = 0.0315819 Jy ! Component: 150 - total flux cleaned = 0.0336528 Jy ! Component: 200 - total flux cleaned = 0.0346172 Jy ! Total flux subtracted in 200 components = 0.0346172 Jy ! Clean residual min=-0.001512 max=0.001674 Jy/beam ! Clean residual mean=0.000000 rms=0.000364 Jy/beam ! Combined flux in latest and established models = 0.0346172 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.0346172 Jy ! Inverting map and beam ! Estimated beam: bmin=1.73 mas, bmaj=4.369 mas, bpa=-4.073 degrees ! Estimated noise=0.27654 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000107651 Jy ! Component: 100 - total flux cleaned = -9.79251e-05 Jy ! Component: 150 - total flux cleaned = -8.32638e-05 Jy ! Component: 200 - total flux cleaned = -7.64421e-05 Jy ! Total flux subtracted in 200 components = -7.64421e-05 Jy ! Clean residual min=-0.000943 max=0.000936 Jy/beam ! Clean residual mean=0.000001 rms=0.000231 Jy/beam ! Combined flux in latest and established models = 0.0345407 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 28 components and 0.0345407 Jy ! Inverting map clean ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.19567e-05 Jy ! Component: 100 - total flux cleaned = 1.72726e-05 Jy ! Component: 150 - total flux cleaned = 1.73486e-05 Jy ! Component: 200 - total flux cleaned = 2.23393e-05 Jy ! Total flux subtracted in 200 components = 2.23393e-05 Jy ! Clean residual min=-0.000938 max=0.000937 Jy/beam ! Clean residual mean=0.000001 rms=0.000230 Jy/beam ! Combined flux in latest and established models = 0.0345631 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 35 components and 0.0345631 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.036363Jy sigma=0.706964 ! Fit after self-cal, rms=0.036364Jy sigma=0.706959 wmodel J1354-2443_C_map.mod ! Writing 35 model components to file: J1354-2443_C_map.mod wobs J1354-2443_C_uvs.fits ! Writing UV FITS file: J1354-2443_C_uvs.fits wwins J1354-2443_C_map.win ! wwins: Wrote 1 windows to J1354-2443_C_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 3.6386e-05 Jy ! Component: 100 - total flux cleaned = 4.86268e-06 Jy ! Component: 150 - total flux cleaned = -3.84656e-05 Jy ! Component: 200 - total flux cleaned = -9.44468e-05 Jy ! Component: 250 - total flux cleaned = -0.00014814 Jy ! Component: 300 - total flux cleaned = -0.000200457 Jy ! Component: 350 - total flux cleaned = -0.000314582 Jy ! Component: 400 - total flux cleaned = -0.000388501 Jy ! Component: 450 - total flux cleaned = -0.000460752 Jy ! Component: 500 - total flux cleaned = -0.000531338 Jy ! Component: 550 - total flux cleaned = -0.000657428 Jy ! Component: 600 - total flux cleaned = -0.000758268 Jy ! Component: 650 - total flux cleaned = -0.000813378 Jy ! Component: 700 - total flux cleaned = -0.000889196 Jy ! Component: 750 - total flux cleaned = -0.000952947 Jy ! Component: 800 - total flux cleaned = -0.00104743 Jy ! Component: 850 - total flux cleaned = -0.00111979 Jy ! Component: 900 - total flux cleaned = -0.00120125 Jy ! Component: 950 - total flux cleaned = -0.00125135 Jy ! Component: 1000 - total flux cleaned = -0.00129111 Jy ! Component: 1050 - total flux cleaned = -0.00133029 Jy ! Component: 1100 - total flux cleaned = -0.00134969 Jy ! Component: 1150 - total flux cleaned = -0.00139734 Jy ! Component: 1200 - total flux cleaned = -0.00143503 Jy ! Component: 1250 - total flux cleaned = -0.00145352 Jy ! Component: 1300 - total flux cleaned = -0.00146263 Jy ! Component: 1350 - total flux cleaned = -0.00148995 Jy ! Component: 1400 - total flux cleaned = -0.00151701 Jy ! Component: 1450 - total flux cleaned = -0.001526 Jy ! Component: 1500 - total flux cleaned = -0.00153481 Jy ! Component: 1550 - total flux cleaned = -0.00153487 Jy ! Component: 1600 - total flux cleaned = -0.0015262 Jy ! Component: 1650 - total flux cleaned = -0.00153477 Jy ! Component: 1700 - total flux cleaned = -0.00150082 Jy ! Component: 1750 - total flux cleaned = -0.00150934 Jy ! Component: 1800 - total flux cleaned = -0.00151762 Jy ! Component: 1850 - total flux cleaned = -0.00150933 Jy ! Component: 1900 - total flux cleaned = -0.00152577 Jy ! Component: 1950 - total flux cleaned = -0.00152577 Jy ! Component: 2000 - total flux cleaned = -0.00155001 Jy ! Component: 2050 - total flux cleaned = -0.00154999 Jy ! Component: 2100 - total flux cleaned = -0.00153418 Jy ! Component: 2150 - total flux cleaned = -0.00153417 Jy ! Component: 2200 - total flux cleaned = -0.00151861 Jy ! Component: 2250 - total flux cleaned = -0.00155745 Jy ! Component: 2300 - total flux cleaned = -0.00151882 Jy ! Component: 2350 - total flux cleaned = -0.00148058 Jy ! Component: 2400 - total flux cleaned = -0.00151109 Jy ! Component: 2450 - total flux cleaned = -0.00150348 Jy ! Component: 2500 - total flux cleaned = -0.00151106 Jy ! Component: 2550 - total flux cleaned = -0.00149611 Jy ! Component: 2600 - total flux cleaned = -0.00148877 Jy ! Component: 2650 - total flux cleaned = -0.00151815 Jy ! Component: 2700 - total flux cleaned = -0.00148153 Jy ! Component: 2750 - total flux cleaned = -0.00147426 Jy ! Component: 2800 - total flux cleaned = -0.00145263 Jy ! Component: 2850 - total flux cleaned = -0.00141689 Jy ! Component: 2900 - total flux cleaned = -0.00143123 Jy ! Component: 2950 - total flux cleaned = -0.00142414 Jy ! Component: 3000 - total flux cleaned = -0.00143118 Jy ! Component: 3050 - total flux cleaned = -0.00141016 Jy ! Component: 3100 - total flux cleaned = -0.00141712 Jy ! Component: 3150 - total flux cleaned = -0.00140332 Jy ! Component: 3200 - total flux cleaned = -0.00141021 Jy ! Component: 3250 - total flux cleaned = -0.00137602 Jy ! Component: 3300 - total flux cleaned = -0.0013692 Jy ! Component: 3350 - total flux cleaned = -0.00135562 Jy ! Component: 3400 - total flux cleaned = -0.00133548 Jy ! Component: 3450 - total flux cleaned = -0.00135555 Jy ! Component: 3500 - total flux cleaned = -0.00133556 Jy ! Component: 3550 - total flux cleaned = -0.00132887 Jy ! Component: 3600 - total flux cleaned = -0.00130262 Jy ! Component: 3650 - total flux cleaned = -0.00131563 Jy ! Component: 3700 - total flux cleaned = -0.00127654 Jy ! Component: 3750 - total flux cleaned = -0.00126363 Jy ! Component: 3800 - total flux cleaned = -0.00125074 Jy ! Component: 3850 - total flux cleaned = -0.00123151 Jy ! Component: 3900 - total flux cleaned = -0.0011933 Jy ! Component: 3950 - total flux cleaned = -0.00116797 Jy ! Component: 4000 - total flux cleaned = -0.00115536 Jy ! Component: 4050 - total flux cleaned = -0.00113655 Jy ! Total flux subtracted in 4096 components = -0.0011116 Jy ! Clean residual min=-0.000361 max=0.000374 Jy/beam ! Clean residual mean=-0.000001 rms=0.000111 Jy/beam ! Combined flux in latest and established models = 0.0334515 Jy keep ! Adding 259 model components to the UV plane model. ! The established model now contains 294 components and 0.0334514 Jy ![Exited script file: /opt64/bin/pima_mupet_02.dfm] wmap /vlbi/vcs9/uvm//J1354-2443_C_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.73 x 4.369 at -4.073 degrees (North through East) ! Clean map min=-0.00070367 max=0.030186 Jy/beam ! Writing clean map to FITS file: /vlbi/vcs9/uvm//J1354-2443_C_a_map.fits wmodel /vlbi/vcs9/uvm//J1354-2443_C_a_map.mod ! Writing 294 model components to file: /vlbi/vcs9/uvm//J1354-2443_C_a_map.mod wobs /vlbi/vcs9/uvm//J1354-2443_C_a_uvs.fits ! Writing UV FITS file: /vlbi/vcs9/uvm//J1354-2443_C_a_uvs.fits wwins /vlbi/vcs9/uvm//J1354-2443_C_a_map.win ! wwins: Wrote 2 windows to /vlbi/vcs9/uvm//J1354-2443_C_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0301862 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000109438 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.08763 1.08763 2.17527 4.35053 8.70106 17.4021 34.8042 69.6085 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.03 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 275.828 quit ! Quitting program ! Log file /vlbi/vcs9/uvm//J1354-2443_C_a_dfm.log closed on Tue Dec 26 22:33:17 2017