! Started logfile: /vlbi/vcs9/uvm//J1344-3655_C_a_dfm.log on Tue Dec 26 22:31:50 2017
float field_size
field_size =  1024
float field_cell
field_cell =   0.3000
float taper_size
taper_size =   40.0
float freq
freq       =    4.12800
obs     /vlbi/vcs9/uvm//J1344-3655_C_a_uvm.fits
! Reading UV FITS file: /vlbi/vcs9/uvm//J1344-3655_C_a_uvm.fits
! AN table 1: 19 integrations on 15 of 15 possible baselines.
! AN table 2: 80 integrations on 28 of 28 possible baselines.
! AN table 3: 118 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.770138 visibilities/baseline/integration-bin.
! Found source: J1344-3655
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 94 lines of history.
! 
! Reading 30824 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/opt64/bin/pima_mupet_02.dfm J1344-3655_C]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 60
float amp_soltime2
amp_soltime2 = 5
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.1
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_02.dvm version of 2017.12.26 === "
! === Difmap script: pima_mupet_02.dvm version of 2017.12.26 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.10178 Jy 
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 8 telescope corrections were flagged in sub-array 1.
!  A total of 97 telescope corrections were flagged in sub-array 2.
!  A total of 76 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 2.
!  A total of 8 telescope corrections were flagged in sub-array 1.
!  A total of 97 telescope corrections were flagged in sub-array 2.
!  A total of 76 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 3.
!  A total of 8 telescope corrections were flagged in sub-array 1.
!  A total of 97 telescope corrections were flagged in sub-array 2.
!  A total of 76 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 4.
!  A total of 8 telescope corrections were flagged in sub-array 1.
!  A total of 97 telescope corrections were flagged in sub-array 2.
!  A total of 76 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 5.
!  A total of 8 telescope corrections were flagged in sub-array 1.
!  A total of 97 telescope corrections were flagged in sub-array 2.
!  A total of 76 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 6.
!  A total of 8 telescope corrections were flagged in sub-array 1.
!  A total of 97 telescope corrections were flagged in sub-array 2.
!  A total of 76 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 7.
!  A total of 8 telescope corrections were flagged in sub-array 1.
!  A total of 97 telescope corrections were flagged in sub-array 2.
!  A total of 76 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 8.
!  A total of 8 telescope corrections were flagged in sub-array 1.
!  A total of 97 telescope corrections were flagged in sub-array 2.
!  A total of 76 telescope corrections were flagged in sub-array 3.
! 
! Fit before self-cal, rms=1.007253Jy  sigma=13.802763
! Fit after  self-cal, rms=0.925311Jy  sigma=12.673111
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
peakwin win_mult
! Inverting map and beam 
! Estimated beam: bmin=1.595 mas, bmaj=8.008 mas, bpa=4.331 degrees
! Estimated noise=0.742313 mJy/beam.
! Added new window around map position (0, 0).
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0608244 Jy
! Component: 100  -  total flux cleaned = 0.0728969 Jy
! Total flux subtracted in 100 components = 0.0728969 Jy
! Clean residual min=-0.003685 max=0.005335 Jy/beam
! Clean residual mean=0.000008 rms=0.000945 Jy/beam
! Combined flux in latest and established models = 0.0728969 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.0728969 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.066377Jy  sigma=0.768864
! Fit after  self-cal, rms=0.066374Jy  sigma=0.768827
! Inverting map 
print "============== Finished uniform weighting CLEAN =============="
! ============== Finished uniform weighting CLEAN ============== 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.365 mas, bmaj=11.38 mas, bpa=3.533 degrees
! Estimated noise=0.294277 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00722297 Jy
! Component: 100  -  total flux cleaned = 0.00937139 Jy
! Component: 150  -  total flux cleaned = 0.0101631 Jy
! Component: 200  -  total flux cleaned = 0.0103548 Jy
! Total flux subtracted in 200 components = 0.0103548 Jy
! Clean residual min=-0.003351 max=0.004706 Jy/beam
! Clean residual mean=0.000031 rms=0.001046 Jy/beam
! Combined flux in latest and established models = 0.0832517 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 42 model components to the UV plane model.
! The established model now contains 49 components and 0.0832517 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.065633Jy  sigma=0.760815
! Fit after  self-cal, rms=0.065631Jy  sigma=0.760798
! Inverting map 
print "============== Finished natural weighting CLEAN =============="
! ============== Finished natural weighting CLEAN ============== 
! 
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 0.887061
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.12     KP        1.22     LA        1.02     NL        1.09     
!   OV        1.18     PT        1.13     
! 
!  A total of 9 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.965465
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.01     HN        1.22     KP        1.07     LA        1.02     
!   NL        0.97     OV        1.03     PT        0.98     SC        1.00     
! 
!  A total of 3 telescope corrections were flagged in sub-array 3.
!  Amplitude normalization factor in sub-array 3: 1.04657
!  Telescope amplitude corrections in sub-array 3:
!   FD        0.89     KP        0.98     LA        0.80     NL        1.01     
!   OV        1.13     PT        0.84     SC        1.04     
! 
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 0.868194
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.01     KP        1.03     LA        1.14     NL        1.53     
!   OV        1.12     PT        1.08     
! 
!  A total of 9 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.958568
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.04     HN        1.29     KP        1.12     LA        1.01     
!   NL        0.93     OV        0.98     PT        0.98     SC        0.99     
! 
!  A total of 3 telescope corrections were flagged in sub-array 3.
!  Amplitude normalization factor in sub-array 3: 1.04553
!  Telescope amplitude corrections in sub-array 3:
!   FD        0.94     KP        0.93     LA        0.86     NL        0.95     
!   OV        1.15     PT        0.85     SC        1.03     
! 
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 0.829622
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.21     KP        1.10     LA        0.99     NL        1.52     
!   OV        1.34     PT        1.07     
! 
!  A total of 9 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.937723
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.00     HN        1.46     KP        1.01     LA        1.03     
!   NL        0.96     OV        1.08     PT        1.02     SC        0.98     
! 
!  A total of 3 telescope corrections were flagged in sub-array 3.
!  Amplitude normalization factor in sub-array 3: 1.00391
!  Telescope amplitude corrections in sub-array 3:
!   FD        0.91     KP        0.95     LA        0.87     NL        1.10     
!   OV        1.18     PT        0.90     SC        1.05     
! 
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 0.835657
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.17     KP        1.14     LA        1.07     NL        1.50     
!   OV        1.31     PT        1.00     
! 
!  A total of 9 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.950381
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.01     HN        1.37     KP        1.09     LA        1.02     
!   NL        0.94     OV        1.00     PT        1.04     SC        0.94     
! 
!  A total of 3 telescope corrections were flagged in sub-array 3.
!  Amplitude normalization factor in sub-array 3: 1.0316
!  Telescope amplitude corrections in sub-array 3:
!   FD        0.94     KP        0.98     LA        0.88     NL        0.93     
!   OV        1.21     PT        0.85     SC        0.99     
! 
! 
! Correcting IF 5.
!  Amplitude normalization factor in sub-array 1: 0.783212
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.27     KP        1.15     LA        1.15     NL        1.82     
!   OV        1.14     PT        1.13     
! 
!  A total of 9 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.944852
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.06     HN        1.33     KP        1.05     LA        1.05     
!   NL        0.95     OV        1.02     PT        1.03     SC        0.98     
! 
!  A total of 3 telescope corrections were flagged in sub-array 3.
!  Amplitude normalization factor in sub-array 3: 1.03463
!  Telescope amplitude corrections in sub-array 3:
!   FD        0.99     KP        0.99     LA        0.85     NL        0.94     
!   OV        1.09     PT        0.89     SC        1.01     
! 
! 
! Correcting IF 6.
!  Amplitude normalization factor in sub-array 1: 0.826636
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.17     KP        1.32     LA        0.99     NL        1.24     
!   OV        1.50     PT        1.04     
! 
!  A total of 9 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.955715
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.08     HN        1.15     KP        1.07     LA        1.03     
!   NL        0.96     OV        1.04     PT        1.05     SC        1.00     
! 
!  A total of 3 telescope corrections were flagged in sub-array 3.
!  Amplitude normalization factor in sub-array 3: 1.03529
!  Telescope amplitude corrections in sub-array 3:
!   FD        0.95     KP        0.92     LA        0.86     NL        0.94     
!   OV        1.11     PT        0.88     SC        1.11     
! 
! 
! Correcting IF 7.
!  Amplitude normalization factor in sub-array 1: 0.769848
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.40     KP        1.10     LA        0.95     NL        1.93     
!   OV        1.43     PT        0.99     
! 
!  A total of 9 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.938902
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.05     HN        1.36     KP        1.06     LA        1.02     
!   NL        0.91     OV        1.05     PT        1.06     SC        1.02     
! 
!  A total of 3 telescope corrections were flagged in sub-array 3.
!  Amplitude normalization factor in sub-array 3: 1.04761
!  Telescope amplitude corrections in sub-array 3:
!   FD        1.04     KP        0.92     LA        0.88     NL        0.94     
!   OV        1.09     PT        0.82     SC        1.00     
! 
! 
! Correcting IF 8.
!  Amplitude normalization factor in sub-array 1: 0.810654
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.24     KP        1.12     LA        1.16     NL        1.38     
!   OV        1.48     PT        1.02     
! 
!  A total of 9 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.928872
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.09     HN        1.40     KP        1.03     LA        1.06     
!   NL        0.92     OV        1.07     PT        1.05     SC        0.99     
! 
!  A total of 3 telescope corrections were flagged in sub-array 3.
!  Amplitude normalization factor in sub-array 3: 1.05576
!  Telescope amplitude corrections in sub-array 3:
!   FD        1.00     KP        0.91     LA        0.83     NL        0.97     
!   OV        1.03     PT        0.87     SC        1.03     
! 
! 
! Fit before self-cal, rms=0.065631Jy  sigma=0.760798
! Fit after  self-cal, rms=0.066260Jy  sigma=0.758330
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.066260Jy  sigma=0.758330
! Fit after  self-cal, rms=0.066265Jy  sigma=0.758312
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.408 mas, bmaj=11.86 mas, bpa=3.754 degrees
! Estimated noise=0.278509 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00385311 Jy
! Component: 100  -  total flux cleaned = -0.00442188 Jy
! Component: 150  -  total flux cleaned = -0.00454818 Jy
! Component: 200  -  total flux cleaned = -0.00462074 Jy
! Total flux subtracted in 200 components = -0.00462074 Jy
! Clean residual min=-0.003482 max=0.003628 Jy/beam
! Clean residual mean=0.000031 rms=0.000818 Jy/beam
! Combined flux in latest and established models = 0.0786309 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 34 model components to the UV plane model.
! The established model now contains 77 components and 0.0786309 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.066273Jy  sigma=0.755337
! Fit after  self-cal, rms=0.066266Jy  sigma=0.755309
! Inverting map 
print "============== Finished amplitude gscale SELF-CAL =============="
! ============== Finished amplitude gscale SELF-CAL ============== 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.066266Jy  sigma=0.755309
! Fit after  self-cal, rms=0.066267Jy  sigma=0.755063
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -3.26234e-05 Jy
! Component: 100  -  total flux cleaned = -9.48498e-05 Jy
! Component: 150  -  total flux cleaned = -0.000148987 Jy
! Component: 200  -  total flux cleaned = -0.000173339 Jy
! Total flux subtracted in 200 components = -0.000173339 Jy
! Clean residual min=-0.003391 max=0.003607 Jy/beam
! Clean residual mean=0.000030 rms=0.000810 Jy/beam
! Combined flux in latest and established models = 0.0784576 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 11 model components to the UV plane model.
! The established model now contains 85 components and 0.0784576 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.066253Jy  sigma=0.754747
! Fit after  self-cal, rms=0.066251Jy  sigma=0.754702
! Inverting map 
print "=== Finished natural weighting clean with shorter phase_soltime "
! === Finished natural weighting clean with shorter phase_soltime  
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.408 x 11.86 at 3.754 degrees (North through East)
! Clean map  min=-0.0033662  max=0.069422 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "============== Finished amplitude self-cal =============="
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.599 mas, bmaj=8.279 mas, bpa=4.728 degrees
! Estimated noise=0.733379 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0597081 Jy
! Component: 100  -  total flux cleaned = 0.0700152 Jy
! Component: 150  -  total flux cleaned = 0.0749118 Jy
! Component: 200  -  total flux cleaned = 0.0777803 Jy
! Total flux subtracted in 200 components = 0.0777803 Jy
! Clean residual min=-0.003637 max=0.004262 Jy/beam
! Clean residual mean=0.000009 rms=0.000848 Jy/beam
! Combined flux in latest and established models = 0.0777803 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 34 model components to the UV plane model.
! The established model now contains 34 components and 0.0777803 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.408 mas, bmaj=11.86 mas, bpa=3.754 degrees
! Estimated noise=0.278509 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000519772 Jy
! Component: 100  -  total flux cleaned = 0.000515827 Jy
! Component: 150  -  total flux cleaned = 0.000513803 Jy
! Component: 200  -  total flux cleaned = 0.000510533 Jy
! Total flux subtracted in 200 components = 0.000510533 Jy
! Clean residual min=-0.003340 max=0.003394 Jy/beam
! Clean residual mean=0.000029 rms=0.000815 Jy/beam
! Combined flux in latest and established models = 0.0782908 Jy
! Adding 8 model components to the UV plane model.
! The established model now contains 40 components and 0.0782908 Jy
! Inverting map 
clean
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 8.93935e-07 Jy
! Component: 100  -  total flux cleaned = -1.09558e-06 Jy
! Component: 150  -  total flux cleaned = 2.159e-05 Jy
! Component: 200  -  total flux cleaned = 2.20011e-05 Jy
! Total flux subtracted in 200 components = 2.20011e-05 Jy
! Clean residual min=-0.003281 max=0.003440 Jy/beam
! Clean residual mean=0.000028 rms=0.000807 Jy/beam
! Combined flux in latest and established models = 0.0783128 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 10 model components to the UV plane model.
! The established model now contains 45 components and 0.0783128 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.066250Jy  sigma=0.754552
! Fit after  self-cal, rms=0.066250Jy  sigma=0.754526
wmodel J1344-3655_C_map.mod
! Writing 45 model components to file: J1344-3655_C_map.mod
wobs   J1344-3655_C_uvs.fits
! Writing UV FITS file: J1344-3655_C_uvs.fits
wwins  J1344-3655_C_map.win
! wwins: Wrote 1 windows to J1344-3655_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000157579 Jy
! Component: 100  -  total flux cleaned = 0.000456508 Jy
! Component: 150  -  total flux cleaned = 0.000808 Jy
! Component: 200  -  total flux cleaned = 0.000968571 Jy
! Component: 250  -  total flux cleaned = 0.00119033 Jy
! Component: 300  -  total flux cleaned = 0.00122434 Jy
! Component: 350  -  total flux cleaned = 0.00125754 Jy
! Component: 400  -  total flux cleaned = 0.00122746 Jy
! Component: 450  -  total flux cleaned = 0.00122743 Jy
! Component: 500  -  total flux cleaned = 0.0011441 Jy
! Component: 550  -  total flux cleaned = 0.00103825 Jy
! Component: 600  -  total flux cleaned = 0.000911714 Jy
! Component: 650  -  total flux cleaned = 0.000790403 Jy
! Component: 700  -  total flux cleaned = 0.000626094 Jy
! Component: 750  -  total flux cleaned = 0.00048961 Jy
! Component: 800  -  total flux cleaned = 0.000400933 Jy
! Component: 850  -  total flux cleaned = 0.000357677 Jy
! Component: 900  -  total flux cleaned = 0.000315576 Jy
! Component: 950  -  total flux cleaned = 0.000274281 Jy
! Component: 1000  -  total flux cleaned = 0.000274201 Jy
! Component: 1050  -  total flux cleaned = 0.000274193 Jy
! Component: 1100  -  total flux cleaned = 0.000255028 Jy
! Component: 1150  -  total flux cleaned = 0.000235921 Jy
! Component: 1200  -  total flux cleaned = 0.000160828 Jy
! Component: 1250  -  total flux cleaned = 0.000105503 Jy
! Component: 1300  -  total flux cleaned = 6.90569e-05 Jy
! Component: 1350  -  total flux cleaned = 3.3326e-05 Jy
! Component: 1400  -  total flux cleaned = -1.91844e-06 Jy
! Component: 1450  -  total flux cleaned = -3.64946e-05 Jy
! Component: 1500  -  total flux cleaned = -3.64061e-05 Jy
! Component: 1550  -  total flux cleaned = -3.65076e-05 Jy
! Component: 1600  -  total flux cleaned = -3.63883e-05 Jy
! Component: 1650  -  total flux cleaned = -8.55731e-05 Jy
! Component: 1700  -  total flux cleaned = -0.000117901 Jy
! Component: 1750  -  total flux cleaned = -0.00011782 Jy
! Component: 1800  -  total flux cleaned = -0.00013357 Jy
! Component: 1850  -  total flux cleaned = -0.000149172 Jy
! Component: 1900  -  total flux cleaned = -0.000180213 Jy
! Component: 1950  -  total flux cleaned = -0.000195692 Jy
! Component: 2000  -  total flux cleaned = -0.000241216 Jy
! Component: 2050  -  total flux cleaned = -0.00025628 Jy
! Component: 2100  -  total flux cleaned = -0.000286189 Jy
! Component: 2150  -  total flux cleaned = -0.000345118 Jy
! Component: 2200  -  total flux cleaned = -0.000359756 Jy
! Component: 2250  -  total flux cleaned = -0.000374299 Jy
! Component: 2300  -  total flux cleaned = -0.000388688 Jy
! Component: 2350  -  total flux cleaned = -0.000417297 Jy
! Component: 2400  -  total flux cleaned = -0.00040315 Jy
! Component: 2450  -  total flux cleaned = -0.000417222 Jy
! Component: 2500  -  total flux cleaned = -0.000431211 Jy
! Component: 2550  -  total flux cleaned = -0.000431137 Jy
! Component: 2600  -  total flux cleaned = -0.000431135 Jy
! Component: 2650  -  total flux cleaned = -0.000444972 Jy
! Component: 2700  -  total flux cleaned = -0.000485788 Jy
! Component: 2750  -  total flux cleaned = -0.000485747 Jy
! Component: 2800  -  total flux cleaned = -0.000525995 Jy
! Component: 2850  -  total flux cleaned = -0.000539423 Jy
! Component: 2900  -  total flux cleaned = -0.000539324 Jy
! Component: 2950  -  total flux cleaned = -0.00055256 Jy
! Component: 3000  -  total flux cleaned = -0.000591994 Jy
! Component: 3050  -  total flux cleaned = -0.00060502 Jy
! Component: 3100  -  total flux cleaned = -0.000618049 Jy
! Component: 3150  -  total flux cleaned = -0.000630991 Jy
! Component: 3200  -  total flux cleaned = -0.000682518 Jy
! Component: 3250  -  total flux cleaned = -0.000720866 Jy
! Component: 3300  -  total flux cleaned = -0.000708195 Jy
! Component: 3350  -  total flux cleaned = -0.000695548 Jy
! Component: 3400  -  total flux cleaned = -0.000720828 Jy
! Component: 3450  -  total flux cleaned = -0.000733397 Jy
! Component: 3500  -  total flux cleaned = -0.000720756 Jy
! Component: 3550  -  total flux cleaned = -0.000708217 Jy
! Component: 3600  -  total flux cleaned = -0.000708174 Jy
! Component: 3650  -  total flux cleaned = -0.000695758 Jy
! Component: 3700  -  total flux cleaned = -0.000683413 Jy
! Component: 3750  -  total flux cleaned = -0.000683438 Jy
! Component: 3800  -  total flux cleaned = -0.000658809 Jy
! Component: 3850  -  total flux cleaned = -0.000634228 Jy
! Component: 3900  -  total flux cleaned = -0.000622 Jy
! Component: 3950  -  total flux cleaned = -0.00062197 Jy
! Component: 4000  -  total flux cleaned = -0.000573206 Jy
! Component: 4050  -  total flux cleaned = -0.00056103 Jy
! Total flux subtracted in 4096 components = -0.000524692 Jy
! Clean residual min=-0.000638 max=0.000625 Jy/beam
! Clean residual mean=0.000007 rms=0.000275 Jy/beam
! Combined flux in latest and established models = 0.0777881 Jy
keep
! Adding 382 model components to the UV plane model.
! The established model now contains 427 components and 0.0777882 Jy
![Exited script file: /opt64/bin/pima_mupet_02.dfm]
wmap   /vlbi/vcs9/uvm//J1344-3655_C_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.408 x 11.86 at 3.754 degrees (North through East)
! Clean map  min=-0.0021515  max=0.069085 Jy/beam
! Writing clean map to FITS file: /vlbi/vcs9/uvm//J1344-3655_C_a_map.fits
wmodel /vlbi/vcs9/uvm//J1344-3655_C_a_map.mod
! Writing 427 model components to file: /vlbi/vcs9/uvm//J1344-3655_C_a_map.mod
wobs   /vlbi/vcs9/uvm//J1344-3655_C_a_uvs.fits
! Writing UV FITS file: /vlbi/vcs9/uvm//J1344-3655_C_a_uvs.fits
wwins  /vlbi/vcs9/uvm//J1344-3655_C_a_map.win
! wwins: Wrote 2 windows to /vlbi/vcs9/uvm//J1344-3655_C_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0690854 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000261915 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.13735 1.13735 2.2747 4.54941 9.09882 18.1976 36.3953 72.7906
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.069 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  263.77 
quit
! Quitting program
! Log file /vlbi/vcs9/uvm//J1344-3655_C_a_dfm.log closed on Tue Dec 26 22:31:54 2017