! Started logfile: /vlbi/vcs9/uvm//J1339-0317_X_a_dfm.log on Tue Dec 26 22:31:07 2017 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 7.39200 obs /vlbi/vcs9/uvm//J1339-0317_X_a_uvm.fits ! Reading UV FITS file: /vlbi/vcs9/uvm//J1339-0317_X_a_uvm.fits ! AN table 1: 32 integrations on 28 of 28 possible baselines. ! AN table 2: 104 integrations on 15 of 15 possible baselines. ! Apparent sampling: 0.937296 visibilities/baseline/integration-bin. ! Found source: J1339-0317 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 7.392e+09 3.2e+07 1 3.2e+07 ! 02 2 7.424e+09 3.2e+07 1 3.2e+07 ! 03 3 7.456e+09 3.2e+07 1 3.2e+07 ! 04 4 7.552e+09 3.2e+07 1 3.2e+07 ! 05 5 7.744e+09 3.2e+07 1 3.2e+07 ! 06 6 7.776e+09 3.2e+07 1 3.2e+07 ! 07 7 7.808e+09 3.2e+07 1 3.2e+07 ! 08 8 7.84e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 76 lines of history. ! ! Reading 18416 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 8 channels. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_02.dfm J1339-0317_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 60 float amp_soltime2 amp_soltime2 = 5 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.1 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_02.dvm version of 2017.12.26 === " ! === Difmap script: pima_mupet_02.dvm version of 2017.12.26 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.0430936 Jy startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 29 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 29 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 29 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 29 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 29 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 29 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 29 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 29 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.001482Jy sigma=22.310007 ! Fit after self-cal, rms=0.978190Jy sigma=21.807496 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. peakwin win_mult ! Inverting map and beam ! Estimated beam: bmin=0.878 mas, bmaj=3.482 mas, bpa=-17.1 degrees ! Estimated noise=0.452203 mJy/beam. ! Added new window around map position (0, 0). flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0183106 Jy ! Component: 100 - total flux cleaned = 0.0219805 Jy ! Total flux subtracted in 100 components = 0.0219805 Jy ! Clean residual min=-0.001723 max=0.001686 Jy/beam ! Clean residual mean=-0.000001 rms=0.000430 Jy/beam ! Combined flux in latest and established models = 0.0219805 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.0219805 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.036720Jy sigma=0.706033 ! Fit after self-cal, rms=0.036711Jy sigma=0.705744 ! Inverting map print "============== Finished uniform weighting CLEAN ==============" ! ============== Finished uniform weighting CLEAN ============== ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.285 mas, bmaj=3.768 mas, bpa=-12.2 degrees ! Estimated noise=0.233967 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000676401 Jy ! Component: 100 - total flux cleaned = 0.00107106 Jy ! Component: 150 - total flux cleaned = 0.00140514 Jy ! Component: 200 - total flux cleaned = 0.00162277 Jy ! Total flux subtracted in 200 components = 0.00162277 Jy ! Clean residual min=-0.001285 max=0.001693 Jy/beam ! Clean residual mean=-0.000001 rms=0.000415 Jy/beam ! Combined flux in latest and established models = 0.0236033 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 40 components and 0.0236033 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.036642Jy sigma=0.704400 ! Fit after self-cal, rms=0.036640Jy sigma=0.704346 ! Inverting map print "============== Finished natural weighting CLEAN ==============" ! ============== Finished natural weighting CLEAN ============== ! gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.976368 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.81 HN 1.07 KP 1.11 ! LA 1.28 MK 0.99 NL 1.08 OV 0.91 ! ! Amplitude normalization factor in sub-array 2: 0.950867 ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 FD 1.08 HN 1.23 LA 0.99 ! NL 0.93 OV 1.12 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.03128 ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.86 HN 0.94 KP 0.88 ! LA 1.09 MK 0.83 NL 1.03 OV 1.02 ! ! Amplitude normalization factor in sub-array 2: 0.961639 ! Telescope amplitude corrections in sub-array 2: ! BR 1.14 FD 1.10 HN 0.99 LA 1.07 ! NL 0.92 OV 1.02 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.975489 ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 0.80 HN 0.96 KP 0.84 ! LA 1.06 MK 1.20 NL 1.16 OV 1.01 ! ! Amplitude normalization factor in sub-array 2: 1.00904 ! Telescope amplitude corrections in sub-array 2: ! BR 1.16 FD 1.01 HN 0.94 LA 0.96 ! NL 0.87 OV 1.00 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.01489 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.86 HN 0.92 KP 1.00 ! LA 1.10 MK 1.13 NL 1.02 OV 0.90 ! ! Amplitude normalization factor in sub-array 2: 0.957496 ! Telescope amplitude corrections in sub-array 2: ! BR 1.10 FD 1.00 HN 1.21 LA 1.02 ! NL 0.92 OV 1.00 ! ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.00345 ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.85 HN 1.13 KP 0.72 ! LA 0.99 MK 1.24 NL 1.03 OV 0.96 ! ! Amplitude normalization factor in sub-array 2: 0.996106 ! Telescope amplitude corrections in sub-array 2: ! BR 1.06 FD 1.04 HN 1.02 LA 1.01 ! NL 0.81 OV 1.08 ! ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.02092 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.76 HN 0.95 KP 1.18 ! LA 1.06 MK 1.16 NL 0.95 OV 0.79 ! ! Amplitude normalization factor in sub-array 2: 0.975278 ! Telescope amplitude corrections in sub-array 2: ! BR 1.18 FD 1.03 HN 1.03 LA 0.88 ! NL 1.01 OV 1.03 ! ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.08657 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.74 HN 0.84 KP 0.87 ! LA 0.91 MK 0.94 NL 1.14 OV 0.92 ! ! Amplitude normalization factor in sub-array 2: 1.00867 ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 FD 0.97 HN 0.95 LA 1.01 ! NL 1.03 OV 1.06 ! ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.979918 ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.76 HN 1.33 KP 0.88 ! LA 0.83 MK 1.03 NL 1.26 OV 1.00 ! ! Amplitude normalization factor in sub-array 2: 0.994956 ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 FD 0.97 HN 1.08 LA 0.96 ! NL 1.11 OV 0.95 ! ! ! Fit before self-cal, rms=0.036640Jy sigma=0.704346 ! Fit after self-cal, rms=0.036744Jy sigma=0.701948 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.036744Jy sigma=0.701948 ! Fit after self-cal, rms=0.036746Jy sigma=0.701934 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.333 mas, bmaj=3.864 mas, bpa=-11.96 degrees ! Estimated noise=0.226442 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000876011 Jy ! Component: 100 - total flux cleaned = -0.00129173 Jy ! Component: 150 - total flux cleaned = -0.00140267 Jy ! Component: 200 - total flux cleaned = -0.00143211 Jy ! Total flux subtracted in 200 components = -0.00143211 Jy ! Clean residual min=-0.001114 max=0.001393 Jy/beam ! Clean residual mean=-0.000001 rms=0.000338 Jy/beam ! Combined flux in latest and established models = 0.0221712 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 60 components and 0.0221712 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.036742Jy sigma=0.701529 ! Fit after self-cal, rms=0.036742Jy sigma=0.701515 ! Inverting map print "============== Finished amplitude gscale SELF-CAL ==============" ! ============== Finished amplitude gscale SELF-CAL ============== ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.036742Jy sigma=0.701515 ! Fit after self-cal, rms=0.036706Jy sigma=0.700160 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 8.30361e-07 Jy ! Component: 100 - total flux cleaned = 3.65296e-05 Jy ! Component: 150 - total flux cleaned = 4.81476e-05 Jy ! Component: 200 - total flux cleaned = 5.31061e-05 Jy ! Total flux subtracted in 200 components = 5.31061e-05 Jy ! Clean residual min=-0.001080 max=0.001392 Jy/beam ! Clean residual mean=-0.000001 rms=0.000338 Jy/beam ! Combined flux in latest and established models = 0.0222243 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 65 components and 0.0222243 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.036702Jy sigma=0.700111 ! Fit after self-cal, rms=0.036701Jy sigma=0.699932 ! Inverting map print "=== Finished natural weighting clean with shorter phase_soltime " ! === Finished natural weighting clean with shorter phase_soltime ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.333 x 3.864 at -11.96 degrees (North through East) ! Clean map min=-0.0011024 max=0.021241 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "============== Finished amplitude self-cal ==============" end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.901 mas, bmaj=3.515 mas, bpa=-16.89 degrees ! Estimated noise=0.449826 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0182079 Jy ! Component: 100 - total flux cleaned = 0.0205228 Jy ! Component: 150 - total flux cleaned = 0.0213297 Jy ! Component: 200 - total flux cleaned = 0.0219164 Jy ! Total flux subtracted in 200 components = 0.0219164 Jy ! Clean residual min=-0.001638 max=0.001438 Jy/beam ! Clean residual mean=-0.000001 rms=0.000357 Jy/beam ! Combined flux in latest and established models = 0.0219164 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.0219164 Jy ! Inverting map and beam ! Estimated beam: bmin=1.333 mas, bmaj=3.864 mas, bpa=-11.96 degrees ! Estimated noise=0.226442 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -3.92093e-05 Jy ! Component: 100 - total flux cleaned = 8.07895e-05 Jy ! Component: 150 - total flux cleaned = 0.000134243 Jy ! Component: 200 - total flux cleaned = 0.000165012 Jy ! Total flux subtracted in 200 components = 0.000165012 Jy ! Clean residual min=-0.001111 max=0.001385 Jy/beam ! Clean residual mean=-0.000001 rms=0.000341 Jy/beam ! Combined flux in latest and established models = 0.0220814 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 36 components and 0.0220814 Jy ! Inverting map clean ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 2.11815e-05 Jy ! Component: 100 - total flux cleaned = 4.08616e-05 Jy ! Component: 150 - total flux cleaned = 4.06384e-05 Jy ! Component: 200 - total flux cleaned = 4.62158e-05 Jy ! Total flux subtracted in 200 components = 4.62158e-05 Jy ! Clean residual min=-0.001095 max=0.001381 Jy/beam ! Clean residual mean=-0.000001 rms=0.000339 Jy/beam ! Combined flux in latest and established models = 0.0221276 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 45 components and 0.0221276 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.036699Jy sigma=0.699933 ! Fit after self-cal, rms=0.036700Jy sigma=0.699886 wmodel J1339-0317_X_map.mod ! Writing 45 model components to file: J1339-0317_X_map.mod wobs J1339-0317_X_uvs.fits ! Writing UV FITS file: J1339-0317_X_uvs.fits wwins J1339-0317_X_map.win ! wwins: Wrote 1 windows to J1339-0317_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000596523 Jy ! Component: 100 - total flux cleaned = 0.000899029 Jy ! Component: 150 - total flux cleaned = 0.00107529 Jy ! Component: 200 - total flux cleaned = 0.00115359 Jy ! Component: 250 - total flux cleaned = 0.00126759 Jy ! Component: 300 - total flux cleaned = 0.00137332 Jy ! Component: 350 - total flux cleaned = 0.00148457 Jy ! Component: 400 - total flux cleaned = 0.00160002 Jy ! Component: 450 - total flux cleaned = 0.00167608 Jy ! Component: 500 - total flux cleaned = 0.00175836 Jy ! Component: 550 - total flux cleaned = 0.00179807 Jy ! Component: 600 - total flux cleaned = 0.0018358 Jy ! Component: 650 - total flux cleaned = 0.00187196 Jy ! Component: 700 - total flux cleaned = 0.00190654 Jy ! Component: 750 - total flux cleaned = 0.00195678 Jy ! Component: 800 - total flux cleaned = 0.00200544 Jy ! Component: 850 - total flux cleaned = 0.00202095 Jy ! Component: 900 - total flux cleaned = 0.00202835 Jy ! Component: 950 - total flux cleaned = 0.00203552 Jy ! Component: 1000 - total flux cleaned = 0.00202103 Jy ! Component: 1050 - total flux cleaned = 0.00202113 Jy ! Component: 1100 - total flux cleaned = 0.00200752 Jy ! Component: 1150 - total flux cleaned = 0.0020278 Jy ! Component: 1200 - total flux cleaned = 0.00201432 Jy ! Component: 1250 - total flux cleaned = 0.00200118 Jy ! Component: 1300 - total flux cleaned = 0.00197559 Jy ! Component: 1350 - total flux cleaned = 0.00196312 Jy ! Component: 1400 - total flux cleaned = 0.00195101 Jy ! Component: 1450 - total flux cleaned = 0.00193895 Jy ! Component: 1500 - total flux cleaned = 0.00193315 Jy ! Component: 1550 - total flux cleaned = 0.00192153 Jy ! Component: 1600 - total flux cleaned = 0.00191017 Jy ! Component: 1650 - total flux cleaned = 0.00190458 Jy ! Component: 1700 - total flux cleaned = 0.00189363 Jy ! Component: 1750 - total flux cleaned = 0.00188817 Jy ! Component: 1800 - total flux cleaned = 0.00187225 Jy ! Component: 1850 - total flux cleaned = 0.00186187 Jy ! Component: 1900 - total flux cleaned = 0.00186189 Jy ! Component: 1950 - total flux cleaned = 0.00185689 Jy ! Component: 2000 - total flux cleaned = 0.00185201 Jy ! Component: 2050 - total flux cleaned = 0.00185203 Jy ! Component: 2100 - total flux cleaned = 0.0018472 Jy ! Component: 2150 - total flux cleaned = 0.00184716 Jy ! Component: 2200 - total flux cleaned = 0.00183298 Jy ! Component: 2250 - total flux cleaned = 0.00181445 Jy ! Component: 2300 - total flux cleaned = 0.00180989 Jy ! Component: 2350 - total flux cleaned = 0.00179171 Jy ! Component: 2400 - total flux cleaned = 0.00177818 Jy ! Component: 2450 - total flux cleaned = 0.00174712 Jy ! Component: 2500 - total flux cleaned = 0.00173835 Jy ! Component: 2550 - total flux cleaned = 0.00172962 Jy ! Component: 2600 - total flux cleaned = 0.00171234 Jy ! Component: 2650 - total flux cleaned = 0.00171663 Jy ! Component: 2700 - total flux cleaned = 0.00169962 Jy ! Component: 2750 - total flux cleaned = 0.00169121 Jy ! Component: 2800 - total flux cleaned = 0.00169955 Jy ! Component: 2850 - total flux cleaned = 0.00169535 Jy ! Component: 2900 - total flux cleaned = 0.00168708 Jy ! Component: 2950 - total flux cleaned = 0.00167886 Jy ! Component: 3000 - total flux cleaned = 0.00167883 Jy ! Component: 3050 - total flux cleaned = 0.00167479 Jy ! Component: 3100 - total flux cleaned = 0.00167479 Jy ! Component: 3150 - total flux cleaned = 0.00165486 Jy ! Component: 3200 - total flux cleaned = 0.00165888 Jy ! Component: 3250 - total flux cleaned = 0.00164701 Jy ! Component: 3300 - total flux cleaned = 0.0016313 Jy ! Component: 3350 - total flux cleaned = 0.00161958 Jy ! Component: 3400 - total flux cleaned = 0.00160792 Jy ! Component: 3450 - total flux cleaned = 0.00159631 Jy ! Component: 3500 - total flux cleaned = 0.00160018 Jy ! Component: 3550 - total flux cleaned = 0.00157326 Jy ! Component: 3600 - total flux cleaned = 0.00156943 Jy ! Component: 3650 - total flux cleaned = 0.00155796 Jy ! Component: 3700 - total flux cleaned = 0.00153127 Jy ! Component: 3750 - total flux cleaned = 0.00151987 Jy ! Component: 3800 - total flux cleaned = 0.00149331 Jy ! Component: 3850 - total flux cleaned = 0.00147818 Jy ! Component: 3900 - total flux cleaned = 0.00146308 Jy ! Component: 3950 - total flux cleaned = 0.00144796 Jy ! Component: 4000 - total flux cleaned = 0.0014329 Jy ! Component: 4050 - total flux cleaned = 0.00142536 Jy ! Total flux subtracted in 4096 components = 0.00140279 Jy ! Clean residual min=-0.000218 max=0.000226 Jy/beam ! Clean residual mean=-0.000000 rms=0.000066 Jy/beam ! Combined flux in latest and established models = 0.0235304 Jy keep ! Adding 288 model components to the UV plane model. ! The established model now contains 333 components and 0.0235304 Jy ![Exited script file: /opt64/bin/pima_mupet_02.dfm] wmap /vlbi/vcs9/uvm//J1339-0317_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.333 x 3.864 at -11.96 degrees (North through East) ! Clean map min=-0.00081647 max=0.021349 Jy/beam ! Writing clean map to FITS file: /vlbi/vcs9/uvm//J1339-0317_X_a_map.fits wmodel /vlbi/vcs9/uvm//J1339-0317_X_a_map.mod ! Writing 333 model components to file: /vlbi/vcs9/uvm//J1339-0317_X_a_map.mod wobs /vlbi/vcs9/uvm//J1339-0317_X_a_uvs.fits ! Writing UV FITS file: /vlbi/vcs9/uvm//J1339-0317_X_a_uvs.fits wwins /vlbi/vcs9/uvm//J1339-0317_X_a_map.win ! wwins: Wrote 2 windows to /vlbi/vcs9/uvm//J1339-0317_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0213486 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 6.91966e-05 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.972381 0.972381 1.94476 3.88952 7.77905 15.5581 31.1162 62.2324 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0002 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.021 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 308.521 quit ! Quitting program ! Log file /vlbi/vcs9/uvm//J1339-0317_X_a_dfm.log closed on Tue Dec 26 22:31:11 2017