! Started logfile: /vlbi/vcs9/uvm//J1338-062A_X_a_dfm.log on Tue Dec 26 22:30:58 2017 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 7.39200 obs /vlbi/vcs9/uvm//J1338-062A_X_a_uvm.fits ! Reading UV FITS file: /vlbi/vcs9/uvm//J1338-062A_X_a_uvm.fits ! AN table 1: 100 integrations on 36 of 36 possible baselines. ! AN table 2: 84 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.861111 visibilities/baseline/integration-bin. ! Found source: J1338-062A ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 7.392e+09 3.2e+07 1 3.2e+07 ! 02 2 7.424e+09 3.2e+07 1 3.2e+07 ! 03 3 7.456e+09 3.2e+07 1 3.2e+07 ! 04 4 7.552e+09 3.2e+07 1 3.2e+07 ! 05 5 7.744e+09 3.2e+07 1 3.2e+07 ! 06 6 7.776e+09 3.2e+07 1 3.2e+07 ! 07 7 7.808e+09 3.2e+07 1 3.2e+07 ! 08 8 7.84e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 94 lines of history. ! ! Reading 50840 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 8 channels. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_02.dfm J1338-062A_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 60 float amp_soltime2 amp_soltime2 = 5 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.1 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_02.dvm version of 2017.12.26 === " ! === Difmap script: pima_mupet_02.dvm version of 2017.12.26 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.0369978 Jy startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 196 telescope corrections were flagged in sub-array 1. ! A total of 30 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 196 telescope corrections were flagged in sub-array 1. ! A total of 30 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 196 telescope corrections were flagged in sub-array 1. ! A total of 30 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 196 telescope corrections were flagged in sub-array 1. ! A total of 30 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 196 telescope corrections were flagged in sub-array 1. ! A total of 30 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 196 telescope corrections were flagged in sub-array 1. ! A total of 30 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 196 telescope corrections were flagged in sub-array 1. ! A total of 30 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 196 telescope corrections were flagged in sub-array 1. ! A total of 30 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.000537Jy sigma=22.364110 ! Fit after self-cal, rms=0.988064Jy sigma=22.099175 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. peakwin win_mult ! Inverting map and beam ! Estimated beam: bmin=0.8013 mas, bmaj=1.962 mas, bpa=-1.068 degrees ! Estimated noise=0.294327 mJy/beam. ! Added new window around map position (0, 0). flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0106669 Jy ! Component: 100 - total flux cleaned = 0.0120818 Jy ! Total flux subtracted in 100 components = 0.0120818 Jy ! Clean residual min=-0.000882 max=0.000805 Jy/beam ! Clean residual mean=0.000000 rms=0.000202 Jy/beam ! Combined flux in latest and established models = 0.0120818 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.0120818 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.034820Jy sigma=0.676658 ! Fit after self-cal, rms=0.034815Jy sigma=0.676492 ! Inverting map print "============== Finished uniform weighting CLEAN ==============" ! ============== Finished uniform weighting CLEAN ============== ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.065 mas, bmaj=2.522 mas, bpa=1.044 degrees ! Estimated noise=0.140452 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000122813 Jy ! Component: 100 - total flux cleaned = 7.32492e-05 Jy ! Component: 150 - total flux cleaned = 3.25913e-05 Jy ! Component: 200 - total flux cleaned = -7.70144e-06 Jy ! Total flux subtracted in 200 components = -7.70144e-06 Jy ! Clean residual min=-0.000560 max=0.000654 Jy/beam ! Clean residual mean=0.000001 rms=0.000140 Jy/beam ! Combined flux in latest and established models = 0.0120741 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 10 components and 0.0120741 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.034809Jy sigma=0.676416 ! Fit after self-cal, rms=0.034809Jy sigma=0.676415 ! Inverting map print "============== Finished natural weighting CLEAN ==============" ! ============== Finished natural weighting CLEAN ============== ! gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.954625 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 HN 1.06 KP 1.18 ! LA 0.97 NL 0.90 OV 0.84 PT 1.32 ! SC 1.17 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 0.952585 ! Telescope amplitude corrections in sub-array 2: ! BR 0.91 FD 1.00 HN 1.03 KP 1.32 ! LA 1.02 MK 0.94 NL 1.17 OV 0.91 ! PT 1.08 SC 1.12 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.950822 ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.04 HN 1.00 KP 1.03 ! LA 1.19 NL 1.01 OV 0.99 PT 1.28 ! SC 0.87 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 0.953905 ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 0.91 HN 1.03 KP 1.01 ! LA 1.27 MK 0.99 NL 0.91 OV 1.11 ! PT 1.28 SC 1.01 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.971759 ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.97 HN 1.10 KP 0.86 ! LA 1.15 NL 0.88 OV 1.08 PT 1.16 ! SC 0.96 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 0.954638 ! Telescope amplitude corrections in sub-array 2: ! BR 1.06 FD 0.81 HN 0.99 KP 1.08 ! LA 1.19 MK 1.07 NL 0.92 OV 0.93 ! PT 1.36 SC 1.06 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.995837 ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 0.83 HN 1.04 KP 0.99 ! LA 1.02 NL 0.88 OV 0.90 PT 1.18 ! SC 1.09 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 0.953366 ! Telescope amplitude corrections in sub-array 2: ! BR 1.19 FD 0.98 HN 0.96 KP 1.00 ! LA 1.03 MK 1.02 NL 1.11 OV 1.13 ! PT 1.19 SC 0.87 ! ! ! Correcting IF 5. ! Amplitude normalization factor in sub-array 1: 0.999623 ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 0.99 HN 0.90 KP 0.80 ! LA 1.22 NL 0.74 OV 0.94 PT 1.20 ! SC 1.05 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 0.988859 ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 0.96 HN 0.72 KP 0.97 ! LA 1.09 MK 1.06 NL 1.03 OV 0.98 ! PT 1.29 SC 1.02 ! ! ! Correcting IF 6. ! Amplitude normalization factor in sub-array 1: 1.02927 ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 0.99 HN 0.96 KP 0.95 ! LA 0.98 NL 0.76 OV 0.78 PT 1.14 ! SC 1.06 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 0.970409 ! Telescope amplitude corrections in sub-array 2: ! BR 1.09 FD 0.88 HN 0.86 KP 1.11 ! LA 1.23 MK 1.08 NL 0.82 OV 0.93 ! PT 1.35 SC 0.95 ! ! ! Correcting IF 7. ! Amplitude normalization factor in sub-array 1: 1.03067 ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.88 HN 0.84 KP 0.82 ! LA 1.08 NL 1.04 OV 0.89 PT 1.10 ! SC 0.98 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 1.00045 ! Telescope amplitude corrections in sub-array 2: ! BR 1.05 FD 0.93 HN 0.97 KP 0.85 ! LA 1.11 MK 1.04 NL 1.02 OV 0.87 ! PT 1.17 SC 0.99 ! ! ! Correcting IF 8. ! Amplitude normalization factor in sub-array 1: 0.997223 ! Telescope amplitude corrections in sub-array 1: ! BR 0.77 FD 0.79 HN 1.03 KP 1.27 ! LA 1.24 NL 1.01 OV 0.76 PT 1.21 ! SC 0.95 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 0.987973 ! Telescope amplitude corrections in sub-array 2: ! BR 0.88 FD 1.00 HN 0.84 KP 1.02 ! LA 1.18 MK 1.01 NL 1.18 OV 0.84 ! PT 1.33 SC 0.84 ! ! ! Fit before self-cal, rms=0.034809Jy sigma=0.676415 ! Fit after self-cal, rms=0.034440Jy sigma=0.674783 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.034440Jy sigma=0.674783 ! Fit after self-cal, rms=0.034441Jy sigma=0.674772 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.05 mas, bmaj=2.505 mas, bpa=1.121 degrees ! Estimated noise=0.132227 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000401514 Jy ! Component: 100 - total flux cleaned = -0.000394498 Jy ! Component: 150 - total flux cleaned = -0.000375675 Jy ! Component: 200 - total flux cleaned = -0.00035671 Jy ! Total flux subtracted in 200 components = -0.00035671 Jy ! Clean residual min=-0.000426 max=0.000369 Jy/beam ! Clean residual mean=-0.000000 rms=0.000085 Jy/beam ! Combined flux in latest and established models = 0.0117174 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 6 model components to the UV plane model. ! The established model now contains 14 components and 0.0117174 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.034442Jy sigma=0.674665 ! Fit after self-cal, rms=0.034442Jy sigma=0.674669 ! Inverting map print "============== Finished amplitude gscale SELF-CAL ==============" ! ============== Finished amplitude gscale SELF-CAL ============== ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.034442Jy sigma=0.674669 ! Fit after self-cal, rms=0.034413Jy sigma=0.673637 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 9.89596e-05 Jy ! Component: 100 - total flux cleaned = 0.000137021 Jy ! Component: 150 - total flux cleaned = 0.000141651 Jy ! Component: 200 - total flux cleaned = 0.000146657 Jy ! Total flux subtracted in 200 components = 0.000146657 Jy ! Clean residual min=-0.000416 max=0.000358 Jy/beam ! Clean residual mean=-0.000000 rms=0.000084 Jy/beam ! Combined flux in latest and established models = 0.011864 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 21 components and 0.011864 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.034411Jy sigma=0.673633 ! Fit after self-cal, rms=0.034415Jy sigma=0.673541 ! Inverting map print "=== Finished natural weighting clean with shorter phase_soltime " ! === Finished natural weighting clean with shorter phase_soltime ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.05 x 2.505 at 1.121 degrees (North through East) ! Clean map min=-0.00039083 max=0.011886 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "============== Finished amplitude self-cal ==============" end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7966 mas, bmaj=1.965 mas, bpa=-1.111 degrees ! Estimated noise=0.280345 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0102325 Jy ! Component: 100 - total flux cleaned = 0.0115931 Jy ! Component: 150 - total flux cleaned = 0.0119377 Jy ! Component: 200 - total flux cleaned = 0.0120461 Jy ! Total flux subtracted in 200 components = 0.0120461 Jy ! Clean residual min=-0.000784 max=0.000662 Jy/beam ! Clean residual mean=-0.000000 rms=0.000168 Jy/beam ! Combined flux in latest and established models = 0.0120461 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.0120461 Jy ! Inverting map and beam ! Estimated beam: bmin=1.05 mas, bmaj=2.505 mas, bpa=1.121 degrees ! Estimated noise=0.132227 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -2.01173e-05 Jy ! Component: 100 - total flux cleaned = -4.32116e-05 Jy ! Component: 150 - total flux cleaned = -5.97107e-05 Jy ! Component: 200 - total flux cleaned = -7.47519e-05 Jy ! Total flux subtracted in 200 components = -7.47519e-05 Jy ! Clean residual min=-0.000415 max=0.000356 Jy/beam ! Clean residual mean=-0.000000 rms=0.000084 Jy/beam ! Combined flux in latest and established models = 0.0119714 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 24 components and 0.0119714 Jy ! Inverting map clean ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -1.11096e-05 Jy ! Component: 100 - total flux cleaned = -2.03036e-05 Jy ! Component: 150 - total flux cleaned = -2.96369e-05 Jy ! Component: 200 - total flux cleaned = -3.76338e-05 Jy ! Total flux subtracted in 200 components = -3.76338e-05 Jy ! Clean residual min=-0.000415 max=0.000354 Jy/beam ! Clean residual mean=-0.000000 rms=0.000083 Jy/beam ! Combined flux in latest and established models = 0.0119338 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 30 components and 0.0119338 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.034416Jy sigma=0.673544 ! Fit after self-cal, rms=0.034422Jy sigma=0.673537 wmodel J1338-062A_X_map.mod ! Writing 30 model components to file: J1338-062A_X_map.mod wobs J1338-062A_X_uvs.fits ! Writing UV FITS file: J1338-062A_X_uvs.fits wwins J1338-062A_X_map.win ! wwins: Wrote 1 windows to J1338-062A_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -4.10407e-05 Jy ! Component: 100 - total flux cleaned = -1.16902e-05 Jy ! Component: 150 - total flux cleaned = -3.36816e-05 Jy ! Component: 200 - total flux cleaned = -6.52614e-05 Jy ! Component: 250 - total flux cleaned = -0.000110812 Jy ! Component: 300 - total flux cleaned = -0.000159297 Jy ! Component: 350 - total flux cleaned = -0.000196773 Jy ! Component: 400 - total flux cleaned = -0.000210527 Jy ! Component: 450 - total flux cleaned = -0.000215074 Jy ! Component: 500 - total flux cleaned = -0.00021085 Jy ! Component: 550 - total flux cleaned = -0.000202345 Jy ! Component: 600 - total flux cleaned = -0.000202289 Jy ! Component: 650 - total flux cleaned = -0.000202273 Jy ! Component: 700 - total flux cleaned = -0.00020624 Jy ! Component: 750 - total flux cleaned = -0.000217924 Jy ! Component: 800 - total flux cleaned = -0.000229384 Jy ! Component: 850 - total flux cleaned = -0.000252049 Jy ! Component: 900 - total flux cleaned = -0.000270676 Jy ! Component: 950 - total flux cleaned = -0.000300003 Jy ! Component: 1000 - total flux cleaned = -0.000307138 Jy ! Component: 1050 - total flux cleaned = -0.000321413 Jy ! Component: 1100 - total flux cleaned = -0.000335537 Jy ! Component: 1150 - total flux cleaned = -0.00034256 Jy ! Component: 1200 - total flux cleaned = -0.00037696 Jy ! Component: 1250 - total flux cleaned = -0.000397316 Jy ! Component: 1300 - total flux cleaned = -0.000410718 Jy ! Component: 1350 - total flux cleaned = -0.000417342 Jy ! Component: 1400 - total flux cleaned = -0.000427237 Jy ! Component: 1450 - total flux cleaned = -0.000443399 Jy ! Component: 1500 - total flux cleaned = -0.000452928 Jy ! Component: 1550 - total flux cleaned = -0.000465563 Jy ! Component: 1600 - total flux cleaned = -0.000474906 Jy ! Component: 1650 - total flux cleaned = -0.000484142 Jy ! Component: 1700 - total flux cleaned = -0.000487159 Jy ! Component: 1750 - total flux cleaned = -0.000487182 Jy ! Component: 1800 - total flux cleaned = -0.000484185 Jy ! Component: 1850 - total flux cleaned = -0.000481264 Jy ! Component: 1900 - total flux cleaned = -0.000472492 Jy ! Component: 1950 - total flux cleaned = -0.000472466 Jy ! Component: 2000 - total flux cleaned = -0.000472476 Jy ! Component: 2050 - total flux cleaned = -0.000469616 Jy ! Component: 2100 - total flux cleaned = -0.00046397 Jy ! Component: 2150 - total flux cleaned = -0.000464009 Jy ! Component: 2200 - total flux cleaned = -0.000458454 Jy ! Component: 2250 - total flux cleaned = -0.000455705 Jy ! Component: 2300 - total flux cleaned = -0.000450293 Jy ! Component: 2350 - total flux cleaned = -0.000450293 Jy ! Component: 2400 - total flux cleaned = -0.000458311 Jy ! Component: 2450 - total flux cleaned = -0.000458289 Jy ! Component: 2500 - total flux cleaned = -0.000455622 Jy ! Component: 2550 - total flux cleaned = -0.000439985 Jy ! Component: 2600 - total flux cleaned = -0.000445168 Jy ! Component: 2650 - total flux cleaned = -0.000437482 Jy ! Component: 2700 - total flux cleaned = -0.000445107 Jy ! Component: 2750 - total flux cleaned = -0.000432466 Jy ! Component: 2800 - total flux cleaned = -0.00043495 Jy ! Component: 2850 - total flux cleaned = -0.000422513 Jy ! Component: 2900 - total flux cleaned = -0.00041019 Jy ! Component: 2950 - total flux cleaned = -0.000419955 Jy ! Component: 3000 - total flux cleaned = -0.000410229 Jy ! Component: 3050 - total flux cleaned = -0.000402961 Jy ! Component: 3100 - total flux cleaned = -0.000398201 Jy ! Component: 3150 - total flux cleaned = -0.000393443 Jy ! Component: 3200 - total flux cleaned = -0.000388736 Jy ! Component: 3250 - total flux cleaned = -0.000393383 Jy ! Component: 3300 - total flux cleaned = -0.000388714 Jy ! Component: 3350 - total flux cleaned = -0.000388727 Jy ! Component: 3400 - total flux cleaned = -0.000395602 Jy ! Component: 3450 - total flux cleaned = -0.000395618 Jy ! Component: 3500 - total flux cleaned = -0.000406927 Jy ! Component: 3550 - total flux cleaned = -0.000406924 Jy ! Component: 3600 - total flux cleaned = -0.000418108 Jy ! Component: 3650 - total flux cleaned = -0.000429221 Jy ! Component: 3700 - total flux cleaned = -0.000424808 Jy ! Component: 3750 - total flux cleaned = -0.000424819 Jy ! Component: 3800 - total flux cleaned = -0.000435742 Jy ! Component: 3850 - total flux cleaned = -0.000440084 Jy ! Component: 3900 - total flux cleaned = -0.000442269 Jy ! Component: 3950 - total flux cleaned = -0.000453013 Jy ! Component: 4000 - total flux cleaned = -0.000450867 Jy ! Component: 4050 - total flux cleaned = -0.000467845 Jy ! Total flux subtracted in 4096 components = -0.000463612 Jy ! Clean residual min=-0.000138 max=0.000168 Jy/beam ! Clean residual mean=-0.000000 rms=0.000037 Jy/beam ! Combined flux in latest and established models = 0.0114702 Jy keep ! Adding 297 model components to the UV plane model. ! The established model now contains 327 components and 0.0114701 Jy ![Exited script file: /opt64/bin/pima_mupet_02.dfm] wmap /vlbi/vcs9/uvm//J1338-062A_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.05 x 2.505 at 1.121 degrees (North through East) ! Clean map min=-0.00033318 max=0.011832 Jy/beam ! Writing clean map to FITS file: /vlbi/vcs9/uvm//J1338-062A_X_a_map.fits wmodel /vlbi/vcs9/uvm//J1338-062A_X_a_map.mod ! Writing 327 model components to file: /vlbi/vcs9/uvm//J1338-062A_X_a_map.mod wobs /vlbi/vcs9/uvm//J1338-062A_X_a_uvs.fits ! Writing UV FITS file: /vlbi/vcs9/uvm//J1338-062A_X_a_uvs.fits wwins /vlbi/vcs9/uvm//J1338-062A_X_a_map.win ! wwins: Wrote 2 windows to /vlbi/vcs9/uvm//J1338-062A_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0118315 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 3.70196e-05 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.938668 0.938668 1.87734 3.75467 7.50934 15.0187 30.0374 60.0747 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0001 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.011 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 319.601 quit ! Quitting program ! Log file /vlbi/vcs9/uvm//J1338-062A_X_a_dfm.log closed on Tue Dec 26 22:31:02 2017