! Started logfile: /vlbi/vcs9/uvm//J1338-062A_C_a_dfm.log on Tue Dec 26 22:30:53 2017
float field_size
field_size =  1024
float field_cell
field_cell =   0.3000
float taper_size
taper_size =   40.0
float freq
freq       =    4.12800
obs     /vlbi/vcs9/uvm//J1338-062A_C_a_uvm.fits
! Reading UV FITS file: /vlbi/vcs9/uvm//J1338-062A_C_a_uvm.fits
! AN table 1: 80 integrations on 15 of 15 possible baselines.
! AN table 2: 74 integrations on 1 of 1 possible baselines.
! AN table 3: 83 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.965529 visibilities/baseline/integration-bin.
! Found source: J1338-062A
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 94 lines of history.
! 
! Reading 23304 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/opt64/bin/pima_mupet_02.dfm J1338-062A_C]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 60
float amp_soltime2
amp_soltime2 = 5
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.1
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_02.dvm version of 2017.12.26 === "
! === Difmap script: pima_mupet_02.dvm version of 2017.12.26 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.0304726 Jy 
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 4 telescope corrections were flagged in sub-array 1.
!  A total of 148 telescope corrections were flagged in sub-array 2.
!  A total of 22 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 2.
!  A total of 4 telescope corrections were flagged in sub-array 1.
!  A total of 148 telescope corrections were flagged in sub-array 2.
!  A total of 22 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 3.
!  A total of 4 telescope corrections were flagged in sub-array 1.
!  A total of 148 telescope corrections were flagged in sub-array 2.
!  A total of 22 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 4.
!  A total of 4 telescope corrections were flagged in sub-array 1.
!  A total of 148 telescope corrections were flagged in sub-array 2.
!  A total of 22 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 5.
!  A total of 4 telescope corrections were flagged in sub-array 1.
!  A total of 148 telescope corrections were flagged in sub-array 2.
!  A total of 22 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 6.
!  A total of 4 telescope corrections were flagged in sub-array 1.
!  A total of 148 telescope corrections were flagged in sub-array 2.
!  A total of 22 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 7.
!  A total of 4 telescope corrections were flagged in sub-array 1.
!  A total of 148 telescope corrections were flagged in sub-array 2.
!  A total of 22 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 8.
!  A total of 4 telescope corrections were flagged in sub-array 1.
!  A total of 148 telescope corrections were flagged in sub-array 2.
!  A total of 22 telescope corrections were flagged in sub-array 3.
! 
! Fit before self-cal, rms=1.000330Jy  sigma=27.269289
! Fit after  self-cal, rms=0.988019Jy  sigma=26.959443
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
peakwin win_mult
! Inverting map and beam 
! Estimated beam: bmin=1.813 mas, bmaj=6.812 mas, bpa=22.57 degrees
! Estimated noise=0.293316 mJy/beam.
! Added new window around map position (0, 0).
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0105591 Jy
! Component: 100  -  total flux cleaned = 0.0122853 Jy
! Total flux subtracted in 100 components = 0.0122853 Jy
! Clean residual min=-0.000927 max=0.000916 Jy/beam
! Clean residual mean=-0.000001 rms=0.000239 Jy/beam
! Combined flux in latest and established models = 0.0122853 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.0122853 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027687Jy  sigma=0.656653
! Fit after  self-cal, rms=0.027678Jy  sigma=0.656395
! Inverting map 
print "============== Finished uniform weighting CLEAN =============="
! ============== Finished uniform weighting CLEAN ============== 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.533 mas, bmaj=7.719 mas, bpa=22.39 degrees
! Estimated noise=0.172061 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000285661 Jy
! Component: 100  -  total flux cleaned = -0.000326109 Jy
! Component: 150  -  total flux cleaned = -0.000332694 Jy
! Component: 200  -  total flux cleaned = -0.000332286 Jy
! Total flux subtracted in 200 components = -0.000332286 Jy
! Clean residual min=-0.000755 max=0.000659 Jy/beam
! Clean residual mean=-0.000001 rms=0.000183 Jy/beam
! Combined flux in latest and established models = 0.011953 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 26 model components to the UV plane model.
! The established model now contains 38 components and 0.011953 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027673Jy  sigma=0.656236
! Fit after  self-cal, rms=0.027673Jy  sigma=0.656235
! Inverting map 
print "============== Finished natural weighting CLEAN =============="
! ============== Finished natural weighting CLEAN ============== 
! 
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.08237
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.89     FD        0.84     KP        1.03     LA        0.81     
!   OV        0.81     PT        1.17     
! 
!  Amplitude normalization factor in sub-array 2: 1
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    NL        0.00*    
! 
!  Amplitude normalization factor in sub-array 3: 1.02114
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.94     FD        0.94     KP        1.01     LA        0.86     
!   NL        0.81     PT        1.34     SC        0.94     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.10144
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.87     KP        0.93     LA        0.75     
!   OV        0.97     PT        0.96     
! 
!  Amplitude normalization factor in sub-array 2: 1
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    NL        0.00*    
! 
!  Amplitude normalization factor in sub-array 3: 1.0048
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.02     FD        0.98     KP        1.17     LA        0.90     
!   NL        0.86     PT        1.03     SC        1.01     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.02477
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        0.85     KP        1.07     LA        0.97     
!   OV        1.03     PT        1.00     
! 
!  Amplitude normalization factor in sub-array 2: 1
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    NL        0.00*    
! 
!  Amplitude normalization factor in sub-array 3: 1.03048
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.94     FD        0.87     KP        1.16     LA        0.89     
!   NL        0.83     PT        1.08     SC        1.02     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.0276
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        0.99     KP        1.01     LA        0.83     
!   OV        0.99     PT        0.94     
! 
!  Amplitude normalization factor in sub-array 2: 1
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    NL        0.00*    
! 
!  Amplitude normalization factor in sub-array 3: 0.964565
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.03     FD        1.09     KP        1.45     LA        0.99     
!   NL        0.96     PT        0.86     SC        0.87     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.05155
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.66     FD        1.08     KP        0.98     LA        1.02     
!   OV        0.95     PT        1.01     
! 
!  Amplitude normalization factor in sub-array 2: 1
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    NL        0.00*    
! 
!  Amplitude normalization factor in sub-array 3: 0.965745
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.82     FD        1.04     KP        1.32     LA        0.91     
!   NL        1.00     PT        1.19     SC        0.97     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.948996
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.09     KP        1.08     LA        0.97     
!   OV        1.04     PT        1.19     
! 
!  Amplitude normalization factor in sub-array 2: 1
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    NL        0.00*    
! 
!  Amplitude normalization factor in sub-array 3: 0.902906
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.12     FD        1.04     KP        1.20     LA        0.99     
!   NL        1.12     PT        1.20     SC        1.10     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.939602
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     FD        1.16     KP        1.23     LA        0.91     
!   OV        0.99     PT        0.98     
! 
!  Amplitude normalization factor in sub-array 2: 1
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    NL        0.00*    
! 
!  Amplitude normalization factor in sub-array 3: 0.914213
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.99     FD        1.02     KP        1.25     LA        1.07     
!   NL        1.14     PT        1.13     SC        1.06     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.01173
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.12     KP        0.99     LA        0.75     
!   OV        1.03     PT        1.09     
! 
!  Amplitude normalization factor in sub-array 2: 1
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    NL        0.00*    
! 
!  Amplitude normalization factor in sub-array 3: 0.922476
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.22     FD        1.01     KP        1.11     LA        0.88     
!   NL        1.04     PT        1.31     SC        1.02     
! 
! 
! Fit before self-cal, rms=0.027673Jy  sigma=0.656235
! Fit after  self-cal, rms=0.027723Jy  sigma=0.654623
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027723Jy  sigma=0.654623
! Fit after  self-cal, rms=0.027724Jy  sigma=0.654615
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.495 mas, bmaj=7.705 mas, bpa=22.92 degrees
! Estimated noise=0.16443 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000214613 Jy
! Component: 100  -  total flux cleaned = -0.000169765 Jy
! Component: 150  -  total flux cleaned = -0.000151021 Jy
! Component: 200  -  total flux cleaned = -0.000133945 Jy
! Total flux subtracted in 200 components = -0.000133945 Jy
! Clean residual min=-0.000536 max=0.000530 Jy/beam
! Clean residual mean=-0.000000 rms=0.000126 Jy/beam
! Combined flux in latest and established models = 0.011819 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 17 model components to the UV plane model.
! The established model now contains 53 components and 0.011819 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027724Jy  sigma=0.654463
! Fit after  self-cal, rms=0.027724Jy  sigma=0.654463
! Inverting map 
print "============== Finished amplitude gscale SELF-CAL =============="
! ============== Finished amplitude gscale SELF-CAL ============== 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027724Jy  sigma=0.654463
! Fit after  self-cal, rms=0.027678Jy  sigma=0.652920
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 9.77746e-05 Jy
! Component: 100  -  total flux cleaned = 0.000107942 Jy
! Component: 150  -  total flux cleaned = 0.000112618 Jy
! Component: 200  -  total flux cleaned = 0.000116294 Jy
! Total flux subtracted in 200 components = 0.000116294 Jy
! Clean residual min=-0.000536 max=0.000489 Jy/beam
! Clean residual mean=-0.000000 rms=0.000125 Jy/beam
! Combined flux in latest and established models = 0.0119353 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 19 model components to the UV plane model.
! The established model now contains 62 components and 0.0119353 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027676Jy  sigma=0.652878
! Fit after  self-cal, rms=0.027672Jy  sigma=0.652740
! Inverting map 
print "=== Finished natural weighting clean with shorter phase_soltime "
! === Finished natural weighting clean with shorter phase_soltime  
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.495 x 7.705 at 22.92 degrees (North through East)
! Clean map  min=-0.00053477  max=0.011682 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "============== Finished amplitude self-cal =============="
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.804 mas, bmaj=6.869 mas, bpa=22.82 degrees
! Estimated noise=0.279623 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0101696 Jy
! Component: 100  -  total flux cleaned = 0.0118139 Jy
! Component: 150  -  total flux cleaned = 0.0121231 Jy
! Component: 200  -  total flux cleaned = 0.0121589 Jy
! Total flux subtracted in 200 components = 0.0121589 Jy
! Clean residual min=-0.000684 max=0.000724 Jy/beam
! Clean residual mean=-0.000001 rms=0.000187 Jy/beam
! Combined flux in latest and established models = 0.0121589 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 29 model components to the UV plane model.
! The established model now contains 29 components and 0.0121589 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.495 mas, bmaj=7.705 mas, bpa=22.92 degrees
! Estimated noise=0.16443 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000184778 Jy
! Component: 100  -  total flux cleaned = -0.000201856 Jy
! Component: 150  -  total flux cleaned = -0.000207052 Jy
! Component: 200  -  total flux cleaned = -0.00020721 Jy
! Total flux subtracted in 200 components = -0.00020721 Jy
! Clean residual min=-0.000548 max=0.000502 Jy/beam
! Clean residual mean=-0.000000 rms=0.000126 Jy/beam
! Combined flux in latest and established models = 0.0119517 Jy
! Adding 16 model components to the UV plane model.
! The established model now contains 44 components and 0.0119517 Jy
! Inverting map 
clean
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -4.3386e-06 Jy
! Component: 100  -  total flux cleaned = -4.21361e-06 Jy
! Component: 150  -  total flux cleaned = -4.21746e-06 Jy
! Component: 200  -  total flux cleaned = -7.80152e-06 Jy
! Total flux subtracted in 200 components = -7.80152e-06 Jy
! Clean residual min=-0.000544 max=0.000490 Jy/beam
! Clean residual mean=-0.000000 rms=0.000125 Jy/beam
! Combined flux in latest and established models = 0.0119439 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 11 model components to the UV plane model.
! The established model now contains 46 components and 0.0119439 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027673Jy  sigma=0.652749
! Fit after  self-cal, rms=0.027672Jy  sigma=0.652717
wmodel J1338-062A_C_map.mod
! Writing 46 model components to file: J1338-062A_C_map.mod
wobs   J1338-062A_C_uvs.fits
! Writing UV FITS file: J1338-062A_C_uvs.fits
wwins  J1338-062A_C_map.win
! wwins: Wrote 1 windows to J1338-062A_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -9.89215e-05 Jy
! Component: 100  -  total flux cleaned = -0.0001087 Jy
! Component: 150  -  total flux cleaned = -7.15065e-05 Jy
! Component: 200  -  total flux cleaned = -1.55991e-05 Jy
! Component: 250  -  total flux cleaned = 1.75251e-05 Jy
! Component: 300  -  total flux cleaned = 5.46861e-05 Jy
! Component: 350  -  total flux cleaned = 8.42112e-05 Jy
! Component: 400  -  total flux cleaned = 0.000112533 Jy
! Component: 450  -  total flux cleaned = 0.00013439 Jy
! Component: 500  -  total flux cleaned = 0.000139716 Jy
! Component: 550  -  total flux cleaned = 0.000149785 Jy
! Component: 600  -  total flux cleaned = 0.000135001 Jy
! Component: 650  -  total flux cleaned = 0.00013023 Jy
! Component: 700  -  total flux cleaned = 0.000111666 Jy
! Component: 750  -  total flux cleaned = 9.35717e-05 Jy
! Component: 800  -  total flux cleaned = 7.60891e-05 Jy
! Component: 850  -  total flux cleaned = 5.47115e-05 Jy
! Component: 900  -  total flux cleaned = 4.22713e-05 Jy
! Component: 950  -  total flux cleaned = 3.41234e-05 Jy
! Component: 1000  -  total flux cleaned = 3.01852e-05 Jy
! Component: 1050  -  total flux cleaned = 3.41587e-05 Jy
! Component: 1100  -  total flux cleaned = 1.87938e-05 Jy
! Component: 1150  -  total flux cleaned = 3.38852e-05 Jy
! Component: 1200  -  total flux cleaned = 3.02397e-05 Jy
! Component: 1250  -  total flux cleaned = 4.10067e-05 Jy
! Component: 1300  -  total flux cleaned = 4.44781e-05 Jy
! Component: 1350  -  total flux cleaned = 4.79139e-05 Jy
! Component: 1400  -  total flux cleaned = 4.44915e-05 Jy
! Component: 1450  -  total flux cleaned = 6.12992e-05 Jy
! Component: 1500  -  total flux cleaned = 5.79996e-05 Jy
! Component: 1550  -  total flux cleaned = 5.79764e-05 Jy
! Component: 1600  -  total flux cleaned = 5.15438e-05 Jy
! Component: 1650  -  total flux cleaned = 3.26528e-05 Jy
! Component: 1700  -  total flux cleaned = 2.33698e-05 Jy
! Component: 1750  -  total flux cleaned = 5.02818e-06 Jy
! Component: 1800  -  total flux cleaned = -1.00285e-05 Jy
! Component: 1850  -  total flux cleaned = -2.18931e-05 Jy
! Component: 1900  -  total flux cleaned = -3.06486e-05 Jy
! Component: 1950  -  total flux cleaned = -5.0807e-05 Jy
! Component: 2000  -  total flux cleaned = -7.91832e-05 Jy
! Component: 2050  -  total flux cleaned = -8.75359e-05 Jy
! Component: 2100  -  total flux cleaned = -0.000112329 Jy
! Component: 2150  -  total flux cleaned = -0.00012323 Jy
! Component: 2200  -  total flux cleaned = -0.000142064 Jy
! Component: 2250  -  total flux cleaned = -0.000144742 Jy
! Component: 2300  -  total flux cleaned = -0.000163098 Jy
! Component: 2350  -  total flux cleaned = -0.000173428 Jy
! Component: 2400  -  total flux cleaned = -0.000168316 Jy
! Component: 2450  -  total flux cleaned = -0.000175914 Jy
! Component: 2500  -  total flux cleaned = -0.000175874 Jy
! Component: 2550  -  total flux cleaned = -0.000175857 Jy
! Component: 2600  -  total flux cleaned = -0.000183179 Jy
! Component: 2650  -  total flux cleaned = -0.000188012 Jy
! Component: 2700  -  total flux cleaned = -0.000192782 Jy
! Component: 2750  -  total flux cleaned = -0.00019753 Jy
! Component: 2800  -  total flux cleaned = -0.000209213 Jy
! Component: 2850  -  total flux cleaned = -0.000216165 Jy
! Component: 2900  -  total flux cleaned = -0.000223055 Jy
! Component: 2950  -  total flux cleaned = -0.000236689 Jy
! Component: 3000  -  total flux cleaned = -0.000245688 Jy
! Component: 3050  -  total flux cleaned = -0.000252399 Jy
! Component: 3100  -  total flux cleaned = -0.000263439 Jy
! Component: 3150  -  total flux cleaned = -0.000276553 Jy
! Component: 3200  -  total flux cleaned = -0.000280894 Jy
! Component: 3250  -  total flux cleaned = -0.000291643 Jy
! Component: 3300  -  total flux cleaned = -0.000295922 Jy
! Component: 3350  -  total flux cleaned = -0.000306491 Jy
! Component: 3400  -  total flux cleaned = -0.000312777 Jy
! Component: 3450  -  total flux cleaned = -0.0003211 Jy
! Component: 3500  -  total flux cleaned = -0.000325229 Jy
! Component: 3550  -  total flux cleaned = -0.000325218 Jy
! Component: 3600  -  total flux cleaned = -0.000327272 Jy
! Component: 3650  -  total flux cleaned = -0.000335358 Jy
! Component: 3700  -  total flux cleaned = -0.000337366 Jy
! Component: 3750  -  total flux cleaned = -0.000341371 Jy
! Component: 3800  -  total flux cleaned = -0.000347332 Jy
! Component: 3850  -  total flux cleaned = -0.00035126 Jy
! Component: 3900  -  total flux cleaned = -0.000355181 Jy
! Component: 3950  -  total flux cleaned = -0.000362947 Jy
! Component: 4000  -  total flux cleaned = -0.000368754 Jy
! Component: 4050  -  total flux cleaned = -0.000378358 Jy
! Total flux subtracted in 4096 components = -0.000386005 Jy
! Clean residual min=-0.000107 max=0.000099 Jy/beam
! Clean residual mean=0.000000 rms=0.000036 Jy/beam
! Combined flux in latest and established models = 0.0115579 Jy
keep
! Adding 276 model components to the UV plane model.
! The established model now contains 322 components and 0.0115579 Jy
![Exited script file: /opt64/bin/pima_mupet_02.dfm]
wmap   /vlbi/vcs9/uvm//J1338-062A_C_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.495 x 7.705 at 22.92 degrees (North through East)
! Clean map  min=-0.0004119  max=0.011653 Jy/beam
! Writing clean map to FITS file: /vlbi/vcs9/uvm//J1338-062A_C_a_map.fits
wmodel /vlbi/vcs9/uvm//J1338-062A_C_a_map.mod
! Writing 322 model components to file: /vlbi/vcs9/uvm//J1338-062A_C_a_map.mod
wobs   /vlbi/vcs9/uvm//J1338-062A_C_a_uvs.fits
! Writing UV FITS file: /vlbi/vcs9/uvm//J1338-062A_C_a_uvs.fits
wwins  /vlbi/vcs9/uvm//J1338-062A_C_a_map.win
! wwins: Wrote 2 windows to /vlbi/vcs9/uvm//J1338-062A_C_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0116526 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 3.46588e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.892303 0.892303 1.78461 3.56921 7.13843 14.2769 28.5537 57.1074
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.011 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  336.208 
quit
! Quitting program
! Log file /vlbi/vcs9/uvm//J1338-062A_C_a_dfm.log closed on Tue Dec 26 22:30:57 2017