! Started logfile: /vlbi/vcs9/uvm//J1337+0035_X_a_dfm.log on Tue Dec 26 22:30:39 2017 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 7.39200 obs /vlbi/vcs9/uvm//J1337+0035_X_a_uvm.fits ! Reading UV FITS file: /vlbi/vcs9/uvm//J1337+0035_X_a_uvm.fits ! AN table 1: 85 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.772549 visibilities/baseline/integration-bin. ! Found source: J1337+0035 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 7.392e+09 3.2e+07 1 3.2e+07 ! 02 2 7.424e+09 3.2e+07 1 3.2e+07 ! 03 3 7.456e+09 3.2e+07 1 3.2e+07 ! 04 4 7.552e+09 3.2e+07 1 3.2e+07 ! 05 5 7.744e+09 3.2e+07 1 3.2e+07 ! 06 6 7.776e+09 3.2e+07 1 3.2e+07 ! 07 7 7.808e+09 3.2e+07 1 3.2e+07 ! 08 8 7.84e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 94 lines of history. ! ! Reading 23640 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 8 channels. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_02.dfm J1337+0035_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 60 float amp_soltime2 amp_soltime2 = 5 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.1 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_02.dvm version of 2017.12.26 === " ! === Difmap script: pima_mupet_02.dvm version of 2017.12.26 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.0676068 Jy startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 141 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 141 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 141 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 141 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 141 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 141 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 141 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 141 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.004407Jy sigma=24.502176 ! Fit after self-cal, rms=0.947040Jy sigma=22.999347 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. peakwin win_mult ! Inverting map and beam ! Estimated beam: bmin=0.7954 mas, bmaj=1.989 mas, bpa=-3.435 degrees ! Estimated noise=0.291279 mJy/beam. ! Added new window around map position (0, 0). flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0446009 Jy ! Component: 100 - total flux cleaned = 0.0598021 Jy ! Total flux subtracted in 100 components = 0.0598021 Jy ! Clean residual min=-0.002761 max=0.005476 Jy/beam ! Clean residual mean=-0.000005 rms=0.000726 Jy/beam ! Combined flux in latest and established models = 0.0598021 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0598021 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.036215Jy sigma=0.803749 ! Fit after self-cal, rms=0.036113Jy sigma=0.801904 ! Inverting map ! Added new window around map position (2.8, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00766587 Jy ! Component: 100 - total flux cleaned = 0.0123106 Jy ! Total flux subtracted in 100 components = 0.0123106 Jy ! Clean residual min=-0.002005 max=0.003883 Jy/beam ! Clean residual mean=-0.000003 rms=0.000480 Jy/beam ! Combined flux in latest and established models = 0.0721127 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 28 components and 0.0721127 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.034291Jy sigma=0.741574 ! Fit after self-cal, rms=0.034248Jy sigma=0.740528 ! Inverting map ! Added new window around map position (1.4, -0.2). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00463078 Jy ! Component: 100 - total flux cleaned = 0.00744227 Jy ! Total flux subtracted in 100 components = 0.00744227 Jy ! Clean residual min=-0.001635 max=0.001382 Jy/beam ! Clean residual mean=-0.000002 rms=0.000346 Jy/beam ! Combined flux in latest and established models = 0.079555 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 53 components and 0.079555 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.033563Jy sigma=0.717677 ! Fit after self-cal, rms=0.033523Jy sigma=0.716600 ! Inverting map print "============== Finished uniform weighting CLEAN ==============" ! ============== Finished uniform weighting CLEAN ============== ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.063 mas, bmaj=2.457 mas, bpa=-4.732 degrees ! Estimated noise=0.188638 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00409413 Jy ! Component: 100 - total flux cleaned = 0.00627498 Jy ! Component: 150 - total flux cleaned = 0.00753249 Jy ! Component: 200 - total flux cleaned = 0.00790756 Jy ! Total flux subtracted in 200 components = 0.00790756 Jy ! Clean residual min=-0.001072 max=0.001179 Jy/beam ! Clean residual mean=0.000001 rms=0.000272 Jy/beam ! Combined flux in latest and established models = 0.0874625 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 60 model components to the UV plane model. ! The established model now contains 95 components and 0.0874625 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.033236Jy sigma=0.706420 ! Fit after self-cal, rms=0.033215Jy sigma=0.705831 ! Inverting map print "============== Finished natural weighting CLEAN ==============" ! ============== Finished natural weighting CLEAN ============== ! gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.997462 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.96 HN 1.10 KP 0.99 ! LA 1.00 MK 0.99 NL 1.03 OV 1.01 ! PT 1.01 SC 0.96 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.00171 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 HN 1.02 KP 1.00 ! LA 1.02 MK 1.02 NL 1.01 OV 1.01 ! PT 1.00 SC 0.93 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.992802 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.03 HN 1.03 KP 0.99 ! LA 1.01 MK 1.04 NL 1.02 OV 0.98 ! PT 0.99 SC 1.00 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.01304 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.97 HN 1.00 KP 1.00 ! LA 0.98 MK 0.95 NL 0.96 OV 1.00 ! PT 1.01 SC 1.00 ! ! ! Correcting IF 5. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.982498 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.97 HN 1.05 KP 0.97 ! LA 0.99 MK 1.13 NL 1.03 OV 1.00 ! PT 1.01 SC 1.05 ! ! ! Correcting IF 6. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.00108 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.98 HN 0.96 KP 0.97 ! LA 1.03 MK 1.07 NL 1.03 OV 1.00 ! PT 1.01 SC 0.94 ! ! ! Correcting IF 7. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.00138 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.96 HN 1.00 KP 0.95 ! LA 1.05 MK 1.06 NL 0.99 OV 1.00 ! PT 1.04 SC 0.96 ! ! ! Correcting IF 8. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.997914 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 HN 0.99 KP 0.99 ! LA 1.00 MK 0.98 NL 1.00 OV 0.98 ! PT 1.01 SC 1.09 ! ! ! Fit before self-cal, rms=0.033215Jy sigma=0.705831 ! Fit after self-cal, rms=0.033330Jy sigma=0.704406 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.033330Jy sigma=0.704406 ! Fit after self-cal, rms=0.033331Jy sigma=0.704404 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.079 mas, bmaj=2.454 mas, bpa=-3.946 degrees ! Estimated noise=0.187633 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000267845 Jy ! Component: 100 - total flux cleaned = 0.000247293 Jy ! Component: 150 - total flux cleaned = 0.000262301 Jy ! Component: 200 - total flux cleaned = 0.000300122 Jy ! Total flux subtracted in 200 components = 0.000300122 Jy ! Clean residual min=-0.000925 max=0.000880 Jy/beam ! Clean residual mean=0.000001 rms=0.000229 Jy/beam ! Combined flux in latest and established models = 0.0877627 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 113 components and 0.0877627 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.033320Jy sigma=0.703925 ! Fit after self-cal, rms=0.033318Jy sigma=0.703887 ! Inverting map print "============== Finished amplitude gscale SELF-CAL ==============" ! ============== Finished amplitude gscale SELF-CAL ============== ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.033318Jy sigma=0.703887 ! Fit after self-cal, rms=0.033261Jy sigma=0.702607 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000158598 Jy ! Component: 100 - total flux cleaned = 0.000181998 Jy ! Component: 150 - total flux cleaned = 0.000200917 Jy ! Component: 200 - total flux cleaned = 0.000200442 Jy ! Total flux subtracted in 200 components = 0.000200442 Jy ! Clean residual min=-0.000918 max=0.000858 Jy/beam ! Clean residual mean=0.000001 rms=0.000226 Jy/beam ! Combined flux in latest and established models = 0.0879631 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 118 components and 0.0879631 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.033258Jy sigma=0.702464 ! Fit after self-cal, rms=0.033246Jy sigma=0.702245 ! Inverting map print "=== Finished natural weighting clean with shorter phase_soltime " ! === Finished natural weighting clean with shorter phase_soltime ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.079 x 2.454 at -3.946 degrees (North through East) ! Clean map min=-0.00088441 max=0.054316 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "============== Finished amplitude self-cal ==============" end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7998 mas, bmaj=1.986 mas, bpa=-3.121 degrees ! Estimated noise=0.291357 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0446077 Jy ! Component: 100 - total flux cleaned = 0.0600144 Jy ! Component: 150 - total flux cleaned = 0.0682461 Jy ! Component: 200 - total flux cleaned = 0.073599 Jy ! Total flux subtracted in 200 components = 0.073599 Jy ! Clean residual min=-0.001502 max=0.002183 Jy/beam ! Clean residual mean=-0.000003 rms=0.000402 Jy/beam ! Combined flux in latest and established models = 0.073599 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.073599 Jy ! Inverting map and beam ! Estimated beam: bmin=1.079 mas, bmaj=2.454 mas, bpa=-3.946 degrees ! Estimated noise=0.187633 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00632142 Jy ! Component: 100 - total flux cleaned = 0.00962278 Jy ! Component: 150 - total flux cleaned = 0.0115196 Jy ! Component: 200 - total flux cleaned = 0.0126653 Jy ! Total flux subtracted in 200 components = 0.0126653 Jy ! Clean residual min=-0.001002 max=0.000978 Jy/beam ! Clean residual mean=0.000000 rms=0.000240 Jy/beam ! Combined flux in latest and established models = 0.0862644 Jy ! Adding 65 model components to the UV plane model. ! The established model now contains 77 components and 0.0862643 Jy ! Inverting map clean ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000707452 Jy ! Component: 100 - total flux cleaned = 0.000986788 Jy ! Component: 150 - total flux cleaned = 0.00120933 Jy ! Component: 200 - total flux cleaned = 0.00137499 Jy ! Total flux subtracted in 200 components = 0.00137499 Jy ! Clean residual min=-0.000939 max=0.000898 Jy/beam ! Clean residual mean=0.000001 rms=0.000228 Jy/beam ! Combined flux in latest and established models = 0.0876393 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 35 model components to the UV plane model. ! The established model now contains 100 components and 0.0876393 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.033253Jy sigma=0.702384 ! Fit after self-cal, rms=0.033245Jy sigma=0.702267 wmodel J1337+0035_X_map.mod ! Writing 100 model components to file: J1337+0035_X_map.mod wobs J1337+0035_X_uvs.fits ! Writing UV FITS file: J1337+0035_X_uvs.fits wwins J1337+0035_X_map.win ! wwins: Wrote 3 windows to J1337+0035_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000102736 Jy ! Component: 100 - total flux cleaned = -8.76716e-05 Jy ! Component: 150 - total flux cleaned = -0.000102148 Jy ! Component: 200 - total flux cleaned = -7.55171e-05 Jy ! Component: 250 - total flux cleaned = -5.0262e-05 Jy ! Component: 300 - total flux cleaned = -5.04423e-05 Jy ! Component: 350 - total flux cleaned = -5.05883e-05 Jy ! Component: 400 - total flux cleaned = -1.62827e-05 Jy ! Component: 450 - total flux cleaned = 5.00856e-05 Jy ! Component: 500 - total flux cleaned = 0.000125411 Jy ! Component: 550 - total flux cleaned = 0.000177816 Jy ! Component: 600 - total flux cleaned = 0.00021883 Jy ! Component: 650 - total flux cleaned = 0.000258947 Jy ! Component: 700 - total flux cleaned = 0.000317558 Jy ! Component: 750 - total flux cleaned = 0.000365138 Jy ! Component: 800 - total flux cleaned = 0.000411481 Jy ! Component: 850 - total flux cleaned = 0.000447843 Jy ! Component: 900 - total flux cleaned = 0.000501301 Jy ! Component: 950 - total flux cleaned = 0.000535999 Jy ! Component: 1000 - total flux cleaned = 0.000570244 Jy ! Component: 1050 - total flux cleaned = 0.000595355 Jy ! Component: 1100 - total flux cleaned = 0.000636329 Jy ! Component: 1150 - total flux cleaned = 0.000676481 Jy ! Component: 1200 - total flux cleaned = 0.000692293 Jy ! Component: 1250 - total flux cleaned = 0.000707655 Jy ! Component: 1300 - total flux cleaned = 0.00074571 Jy ! Component: 1350 - total flux cleaned = 0.000745813 Jy ! Component: 1400 - total flux cleaned = 0.000812251 Jy ! Component: 1450 - total flux cleaned = 0.000833884 Jy ! Component: 1500 - total flux cleaned = 0.000862515 Jy ! Component: 1550 - total flux cleaned = 0.000869672 Jy ! Component: 1600 - total flux cleaned = 0.000904513 Jy ! Component: 1650 - total flux cleaned = 0.00093177 Jy ! Component: 1700 - total flux cleaned = 0.000951955 Jy ! Component: 1750 - total flux cleaned = 0.000965035 Jy ! Component: 1800 - total flux cleaned = 0.000984678 Jy ! Component: 1850 - total flux cleaned = 0.00100397 Jy ! Component: 1900 - total flux cleaned = 0.00102296 Jy ! Component: 1950 - total flux cleaned = 0.0010293 Jy ! Component: 2000 - total flux cleaned = 0.00106657 Jy ! Component: 2050 - total flux cleaned = 0.00107269 Jy ! Component: 2100 - total flux cleaned = 0.00109091 Jy ! Component: 2150 - total flux cleaned = 0.0010969 Jy ! Component: 2200 - total flux cleaned = 0.00113247 Jy ! Component: 2250 - total flux cleaned = 0.00116178 Jy ! Component: 2300 - total flux cleaned = 0.00121967 Jy ! Component: 2350 - total flux cleaned = 0.00124258 Jy ! Component: 2400 - total flux cleaned = 0.00128223 Jy ! Component: 2450 - total flux cleaned = 0.00133274 Jy ! Component: 2500 - total flux cleaned = 0.00135491 Jy ! Component: 2550 - total flux cleaned = 0.00138781 Jy ! Component: 2600 - total flux cleaned = 0.00140956 Jy ! Component: 2650 - total flux cleaned = 0.00143647 Jy ! Component: 2700 - total flux cleaned = 0.00146851 Jy ! Component: 2750 - total flux cleaned = 0.00150557 Jy ! Component: 2800 - total flux cleaned = 0.00154213 Jy ! Component: 2850 - total flux cleaned = 0.00155777 Jy ! Component: 2900 - total flux cleaned = 0.00158866 Jy ! Component: 2950 - total flux cleaned = 0.00162944 Jy ! Component: 3000 - total flux cleaned = 0.00169003 Jy ! Component: 3050 - total flux cleaned = 0.00169998 Jy ! Component: 3100 - total flux cleaned = 0.00174969 Jy ! Component: 3150 - total flux cleaned = 0.00177434 Jy ! Component: 3200 - total flux cleaned = 0.00182325 Jy ! Component: 3250 - total flux cleaned = 0.00186682 Jy ! Component: 3300 - total flux cleaned = 0.00192449 Jy ! Component: 3350 - total flux cleaned = 0.00194831 Jy ! Component: 3400 - total flux cleaned = 0.00198139 Jy ! Component: 3450 - total flux cleaned = 0.00202362 Jy ! Component: 3500 - total flux cleaned = 0.0020516 Jy ! Component: 3550 - total flux cleaned = 0.00207472 Jy ! Component: 3600 - total flux cleaned = 0.00210683 Jy ! Component: 3650 - total flux cleaned = 0.00215229 Jy ! Component: 3700 - total flux cleaned = 0.00219287 Jy ! Component: 3750 - total flux cleaned = 0.00221532 Jy ! Component: 3800 - total flux cleaned = 0.00223754 Jy ! Component: 3850 - total flux cleaned = 0.00229063 Jy ! Component: 3900 - total flux cleaned = 0.00232578 Jy ! Component: 3950 - total flux cleaned = 0.00234326 Jy ! Component: 4000 - total flux cleaned = 0.00237362 Jy ! Component: 4050 - total flux cleaned = 0.00241239 Jy ! Total flux subtracted in 4096 components = 0.00243805 Jy ! Clean residual min=-0.000233 max=0.000263 Jy/beam ! Clean residual mean=0.000000 rms=0.000075 Jy/beam ! Combined flux in latest and established models = 0.0900774 Jy keep ! Adding 308 model components to the UV plane model. ! The established model now contains 408 components and 0.0900774 Jy ![Exited script file: /opt64/bin/pima_mupet_02.dfm] wmap /vlbi/vcs9/uvm//J1337+0035_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.079 x 2.454 at -3.946 degrees (North through East) ! Clean map min=-0.00047908 max=0.054234 Jy/beam ! Writing clean map to FITS file: /vlbi/vcs9/uvm//J1337+0035_X_a_map.fits wmodel /vlbi/vcs9/uvm//J1337+0035_X_a_map.mod ! Writing 408 model components to file: /vlbi/vcs9/uvm//J1337+0035_X_a_map.mod wobs /vlbi/vcs9/uvm//J1337+0035_X_a_uvs.fits ! Writing UV FITS file: /vlbi/vcs9/uvm//J1337+0035_X_a_uvs.fits wwins /vlbi/vcs9/uvm//J1337+0035_X_a_map.win ! wwins: Wrote 4 windows to /vlbi/vcs9/uvm//J1337+0035_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0542335 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 7.50642e-05 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.415228 0.415228 0.830456 1.66091 3.32182 6.64364 13.2873 26.5746 53.1492 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0002 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.054 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 722.495 quit ! Quitting program ! Log file /vlbi/vcs9/uvm//J1337+0035_X_a_dfm.log closed on Tue Dec 26 22:30:43 2017