! Started logfile: /vlbi/vcs9/uvm//J1337+0035_C_a_dfm.log on Tue Dec 26 22:30:34 2017 float field_size field_size = 1024 float field_cell field_cell = 0.3000 float taper_size taper_size = 40.0 float freq freq = 4.12800 obs /vlbi/vcs9/uvm//J1337+0035_C_a_uvm.fits ! Reading UV FITS file: /vlbi/vcs9/uvm//J1337+0035_C_a_uvm.fits ! AN table 1: 85 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.772549 visibilities/baseline/integration-bin. ! Found source: J1337+0035 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 4.128e+09 3.2e+07 1 3.2e+07 ! 02 2 4.16e+09 3.2e+07 1 3.2e+07 ! 03 3 4.192e+09 3.2e+07 1 3.2e+07 ! 04 4 4.224e+09 3.2e+07 1 3.2e+07 ! 05 5 4.416e+09 3.2e+07 1 3.2e+07 ! 06 6 4.512e+09 3.2e+07 1 3.2e+07 ! 07 7 4.544e+09 3.2e+07 1 3.2e+07 ! 08 8 4.576e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 94 lines of history. ! ! Reading 23640 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 8 channels. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.3 print "taper_size =", taper_size ! taper_size = 40 ![@/opt64/bin/pima_mupet_02.dfm J1337+0035_C] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 60 float amp_soltime2 amp_soltime2 = 5 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.1 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_02.dvm version of 2017.12.26 === " ! === Difmap script: pima_mupet_02.dvm version of 2017.12.26 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.0748407 Jy startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 141 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 141 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 141 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 141 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 141 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 141 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 141 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 141 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.005641Jy sigma=28.443411 ! Fit after self-cal, rms=0.934114Jy sigma=26.322892 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. peakwin win_mult ! Inverting map and beam ! Estimated beam: bmin=1.374 mas, bmaj=3.469 mas, bpa=-2.659 degrees ! Estimated noise=0.28085 mJy/beam. ! Added new window around map position (0, 0). flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0538017 Jy ! Component: 100 - total flux cleaned = 0.0672761 Jy ! Total flux subtracted in 100 components = 0.0672761 Jy ! Clean residual min=-0.002294 max=0.007420 Jy/beam ! Clean residual mean=-0.000002 rms=0.000622 Jy/beam ! Combined flux in latest and established models = 0.0672762 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0672762 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.032420Jy sigma=0.816440 ! Fit after self-cal, rms=0.032377Jy sigma=0.815406 ! Inverting map ! Added new window around map position (2.4, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00848331 Jy ! Component: 100 - total flux cleaned = 0.0127435 Jy ! Total flux subtracted in 100 components = 0.0127435 Jy ! Clean residual min=-0.001546 max=0.002338 Jy/beam ! Clean residual mean=-0.000000 rms=0.000368 Jy/beam ! Combined flux in latest and established models = 0.0800197 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 18 components and 0.0800197 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.030241Jy sigma=0.737584 ! Fit after self-cal, rms=0.030080Jy sigma=0.732457 ! Inverting map ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0033473 Jy ! Component: 100 - total flux cleaned = 0.00518316 Jy ! Total flux subtracted in 100 components = 0.00518316 Jy ! Clean residual min=-0.001302 max=0.001286 Jy/beam ! Clean residual mean=0.000000 rms=0.000288 Jy/beam ! Combined flux in latest and established models = 0.0852028 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 32 components and 0.0852028 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.029723Jy sigma=0.718962 ! Fit after self-cal, rms=0.029695Jy sigma=0.717964 ! Inverting map print "============== Finished uniform weighting CLEAN ==============" ! ============== Finished uniform weighting CLEAN ============== ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.869 mas, bmaj=4.327 mas, bpa=-2.987 degrees ! Estimated noise=0.16277 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00217363 Jy ! Component: 100 - total flux cleaned = 0.00314778 Jy ! Component: 150 - total flux cleaned = 0.00346052 Jy ! Component: 200 - total flux cleaned = 0.00354165 Jy ! Total flux subtracted in 200 components = 0.00354165 Jy ! Clean residual min=-0.001451 max=0.001917 Jy/beam ! Clean residual mean=0.000001 rms=0.000495 Jy/beam ! Combined flux in latest and established models = 0.0887445 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 45 components and 0.0887445 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.029600Jy sigma=0.714346 ! Fit after self-cal, rms=0.029591Jy sigma=0.713968 ! Inverting map print "============== Finished natural weighting CLEAN ==============" ! ============== Finished natural weighting CLEAN ============== ! gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.00909 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.01 HN 1.01 KP 1.01 ! LA 0.99 MK 0.92 NL 1.00 OV 1.02 ! PT 1.04 SC 0.94 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.999496 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.03 HN 1.02 KP 1.01 ! LA 1.00 MK 0.98 NL 1.00 OV 1.00 ! PT 1.02 SC 1.00 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.997758 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.01 HN 1.00 KP 1.03 ! LA 1.00 MK 1.02 NL 0.99 OV 1.03 ! PT 1.00 SC 0.98 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.01511 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 HN 1.00 KP 1.02 ! LA 0.95 MK 0.98 NL 0.97 OV 1.00 ! PT 0.95 SC 0.99 ! ! ! Correcting IF 5. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.993614 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 1.02 KP 1.00 ! LA 0.99 MK 1.00 NL 1.02 OV 1.00 ! PT 1.00 SC 1.04 ! ! ! Correcting IF 6. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.998968 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.02 HN 1.01 KP 1.00 ! LA 1.00 MK 1.00 NL 1.01 OV 0.99 ! PT 1.01 SC 0.99 ! ! ! Correcting IF 7. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.00126 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00 HN 0.99 KP 1.00 ! LA 1.00 MK 0.96 NL 1.05 OV 0.98 ! PT 1.02 SC 1.02 ! ! ! Correcting IF 8. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.992164 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.02 HN 1.02 KP 1.00 ! LA 1.01 MK 1.02 NL 1.00 OV 0.96 ! PT 1.03 SC 1.03 ! ! ! Fit before self-cal, rms=0.029591Jy sigma=0.713968 ! Fit after self-cal, rms=0.029468Jy sigma=0.712008 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.029468Jy sigma=0.712008 ! Fit after self-cal, rms=0.029469Jy sigma=0.712004 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.868 mas, bmaj=4.307 mas, bpa=-3.046 degrees ! Estimated noise=0.162481 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000313751 Jy ! Component: 100 - total flux cleaned = 0.000299924 Jy ! Component: 150 - total flux cleaned = 0.000276901 Jy ! Component: 200 - total flux cleaned = 0.00028586 Jy ! Total flux subtracted in 200 components = 0.00028586 Jy ! Clean residual min=-0.001302 max=0.001863 Jy/beam ! Clean residual mean=0.000001 rms=0.000482 Jy/beam ! Combined flux in latest and established models = 0.0890304 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 54 components and 0.0890304 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.029458Jy sigma=0.711595 ! Fit after self-cal, rms=0.029457Jy sigma=0.711536 ! Inverting map print "============== Finished amplitude gscale SELF-CAL ==============" ! ============== Finished amplitude gscale SELF-CAL ============== ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.029457Jy sigma=0.711536 ! Fit after self-cal, rms=0.029430Jy sigma=0.710701 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 5.59689e-05 Jy ! Component: 100 - total flux cleaned = 4.82557e-05 Jy ! Component: 150 - total flux cleaned = 1.85212e-05 Jy ! Component: 200 - total flux cleaned = 6.02648e-06 Jy ! Total flux subtracted in 200 components = 6.02648e-06 Jy ! Clean residual min=-0.001315 max=0.001872 Jy/beam ! Clean residual mean=0.000001 rms=0.000481 Jy/beam ! Combined flux in latest and established models = 0.0890364 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 62 components and 0.0890364 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.029426Jy sigma=0.710566 ! Fit after self-cal, rms=0.029421Jy sigma=0.710418 ! Inverting map print "=== Finished natural weighting clean with shorter phase_soltime " ! === Finished natural weighting clean with shorter phase_soltime ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.868 x 4.307 at -3.046 degrees (North through East) ! Clean map min=-0.0012973 max=0.066006 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "============== Finished amplitude self-cal ==============" end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.374 mas, bmaj=3.465 mas, bpa=-2.712 degrees ! Estimated noise=0.280077 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.05372 Jy ! Component: 100 - total flux cleaned = 0.0687363 Jy ! Component: 150 - total flux cleaned = 0.0767937 Jy ! Component: 200 - total flux cleaned = 0.0812837 Jy ! Total flux subtracted in 200 components = 0.0812837 Jy ! Clean residual min=-0.001284 max=0.001696 Jy/beam ! Clean residual mean=-0.000000 rms=0.000310 Jy/beam ! Combined flux in latest and established models = 0.0812837 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.0812837 Jy ! Inverting map and beam ! Estimated beam: bmin=1.868 mas, bmaj=4.307 mas, bpa=-3.046 degrees ! Estimated noise=0.162481 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00429417 Jy ! Component: 100 - total flux cleaned = 0.00621648 Jy ! Component: 150 - total flux cleaned = 0.00719119 Jy ! Component: 200 - total flux cleaned = 0.00750817 Jy ! Total flux subtracted in 200 components = 0.00750817 Jy ! Clean residual min=-0.001264 max=0.001848 Jy/beam ! Clean residual mean=0.000001 rms=0.000484 Jy/beam ! Combined flux in latest and established models = 0.0887918 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 45 components and 0.0887918 Jy ! Inverting map clean ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000122602 Jy ! Component: 100 - total flux cleaned = 0.000171033 Jy ! Component: 150 - total flux cleaned = 0.000212382 Jy ! Component: 200 - total flux cleaned = 0.000230411 Jy ! Total flux subtracted in 200 components = 0.000230411 Jy ! Clean residual min=-0.001271 max=0.001864 Jy/beam ! Clean residual mean=0.000001 rms=0.000481 Jy/beam ! Combined flux in latest and established models = 0.0890222 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 54 components and 0.0890222 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.029422Jy sigma=0.710389 ! Fit after self-cal, rms=0.029418Jy sigma=0.710286 wmodel J1337+0035_C_map.mod ! Writing 54 model components to file: J1337+0035_C_map.mod wobs J1337+0035_C_uvs.fits ! Writing UV FITS file: J1337+0035_C_uvs.fits wwins J1337+0035_C_map.win ! wwins: Wrote 2 windows to J1337+0035_C_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000838782 Jy ! Component: 100 - total flux cleaned = 0.00157211 Jy ! Component: 150 - total flux cleaned = 0.00223058 Jy ! Component: 200 - total flux cleaned = 0.00282757 Jy ! Component: 250 - total flux cleaned = 0.0033098 Jy ! Component: 300 - total flux cleaned = 0.00365668 Jy ! Component: 350 - total flux cleaned = 0.00390792 Jy ! Component: 400 - total flux cleaned = 0.00405521 Jy ! Component: 450 - total flux cleaned = 0.0041778 Jy ! Component: 500 - total flux cleaned = 0.00426172 Jy ! Component: 550 - total flux cleaned = 0.00431009 Jy ! Component: 600 - total flux cleaned = 0.00432617 Jy ! Component: 650 - total flux cleaned = 0.00438591 Jy ! Component: 700 - total flux cleaned = 0.00438553 Jy ! Component: 750 - total flux cleaned = 0.00438534 Jy ! Component: 800 - total flux cleaned = 0.00439906 Jy ! Component: 850 - total flux cleaned = 0.00439964 Jy ! Component: 900 - total flux cleaned = 0.00443734 Jy ! Component: 950 - total flux cleaned = 0.0044493 Jy ! Component: 1000 - total flux cleaned = 0.00442571 Jy ! Component: 1050 - total flux cleaned = 0.00443703 Jy ! Component: 1100 - total flux cleaned = 0.00439232 Jy ! Component: 1150 - total flux cleaned = 0.00432761 Jy ! Component: 1200 - total flux cleaned = 0.00428582 Jy ! Component: 1250 - total flux cleaned = 0.00420417 Jy ! Component: 1300 - total flux cleaned = 0.00418449 Jy ! Component: 1350 - total flux cleaned = 0.00413575 Jy ! Component: 1400 - total flux cleaned = 0.00409773 Jy ! Component: 1450 - total flux cleaned = 0.00402374 Jy ! Component: 1500 - total flux cleaned = 0.0039876 Jy ! Component: 1550 - total flux cleaned = 0.00396124 Jy ! Component: 1600 - total flux cleaned = 0.00392648 Jy ! Component: 1650 - total flux cleaned = 0.00387584 Jy ! Component: 1700 - total flux cleaned = 0.00383449 Jy ! Component: 1750 - total flux cleaned = 0.00383428 Jy ! Component: 1800 - total flux cleaned = 0.00379456 Jy ! Component: 1850 - total flux cleaned = 0.00375564 Jy ! Component: 1900 - total flux cleaned = 0.00371001 Jy ! Component: 1950 - total flux cleaned = 0.0036728 Jy ! Component: 2000 - total flux cleaned = 0.00366525 Jy ! Component: 2050 - total flux cleaned = 0.00359277 Jy ! Component: 2100 - total flux cleaned = 0.0035571 Jy ! Component: 2150 - total flux cleaned = 0.00353602 Jy ! Component: 2200 - total flux cleaned = 0.00347372 Jy ! Component: 2250 - total flux cleaned = 0.00345343 Jy ! Component: 2300 - total flux cleaned = 0.00341327 Jy ! Component: 2350 - total flux cleaned = 0.0033933 Jy ! Component: 2400 - total flux cleaned = 0.00334091 Jy ! Component: 2450 - total flux cleaned = 0.00330884 Jy ! Component: 2500 - total flux cleaned = 0.00323272 Jy ! Component: 2550 - total flux cleaned = 0.00322023 Jy ! Component: 2600 - total flux cleaned = 0.00317696 Jy ! Component: 2650 - total flux cleaned = 0.00316472 Jy ! Component: 2700 - total flux cleaned = 0.00316473 Jy ! Component: 2750 - total flux cleaned = 0.00311691 Jy ! Component: 2800 - total flux cleaned = 0.00309926 Jy ! Component: 2850 - total flux cleaned = 0.00306999 Jy ! Component: 2900 - total flux cleaned = 0.00306422 Jy ! Component: 2950 - total flux cleaned = 0.00302408 Jy ! Component: 3000 - total flux cleaned = 0.00303543 Jy ! Component: 3050 - total flux cleaned = 0.00297931 Jy ! Component: 3100 - total flux cleaned = 0.00297937 Jy ! Component: 3150 - total flux cleaned = 0.00296288 Jy ! Component: 3200 - total flux cleaned = 0.00293021 Jy ! Component: 3250 - total flux cleaned = 0.00290334 Jy ! Component: 3300 - total flux cleaned = 0.00290338 Jy ! Component: 3350 - total flux cleaned = 0.00287697 Jy ! Component: 3400 - total flux cleaned = 0.0028821 Jy ! Component: 3450 - total flux cleaned = 0.00286648 Jy ! Component: 3500 - total flux cleaned = 0.00285615 Jy ! Component: 3550 - total flux cleaned = 0.00283074 Jy ! Component: 3600 - total flux cleaned = 0.00281557 Jy ! Component: 3650 - total flux cleaned = 0.00282058 Jy ! Component: 3700 - total flux cleaned = 0.00279082 Jy ! Component: 3750 - total flux cleaned = 0.00275634 Jy ! Component: 3800 - total flux cleaned = 0.00275634 Jy ! Component: 3850 - total flux cleaned = 0.00273695 Jy ! Component: 3900 - total flux cleaned = 0.00272252 Jy ! Component: 3950 - total flux cleaned = 0.00271292 Jy ! Component: 4000 - total flux cleaned = 0.00269401 Jy ! Component: 4050 - total flux cleaned = 0.00268925 Jy ! Total flux subtracted in 4096 components = 0.00267057 Jy ! Clean residual min=-0.000250 max=0.000266 Jy/beam ! Clean residual mean=0.000001 rms=0.000091 Jy/beam ! Combined flux in latest and established models = 0.0916928 Jy keep ! Adding 426 model components to the UV plane model. ! The established model now contains 480 components and 0.0916928 Jy ![Exited script file: /opt64/bin/pima_mupet_02.dfm] wmap /vlbi/vcs9/uvm//J1337+0035_C_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.868 x 4.307 at -3.046 degrees (North through East) ! Clean map min=-0.0004808 max=0.066069 Jy/beam ! Writing clean map to FITS file: /vlbi/vcs9/uvm//J1337+0035_C_a_map.fits wmodel /vlbi/vcs9/uvm//J1337+0035_C_a_map.mod ! Writing 480 model components to file: /vlbi/vcs9/uvm//J1337+0035_C_a_map.mod wobs /vlbi/vcs9/uvm//J1337+0035_C_a_uvs.fits ! Writing UV FITS file: /vlbi/vcs9/uvm//J1337+0035_C_a_uvs.fits wwins /vlbi/vcs9/uvm//J1337+0035_C_a_map.win ! wwins: Wrote 3 windows to /vlbi/vcs9/uvm//J1337+0035_C_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0660688 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 9.11735e-05 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.413994 0.413994 0.827988 1.65598 3.31195 6.6239 13.2478 26.4956 52.9912 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0002 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.066 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 724.648 quit ! Quitting program ! Log file /vlbi/vcs9/uvm//J1337+0035_C_a_dfm.log closed on Tue Dec 26 22:30:38 2017