! Started logfile: /vlbi/vcs9/uvm//J1335-2950_C_a_dfm.log on Tue Dec 26 22:30:25 2017
float field_size
field_size =  1024
float field_cell
field_cell =   0.3000
float taper_size
taper_size =   40.0
float freq
freq       =    4.12800
obs     /vlbi/vcs9/uvm//J1335-2950_C_a_uvm.fits
! Reading UV FITS file: /vlbi/vcs9/uvm//J1335-2950_C_a_uvm.fits
! AN table 1: 95 integrations on 21 of 21 possible baselines.
! AN table 2: 95 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.849708 visibilities/baseline/integration-bin.
! Found source: J1335-2950
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 85 lines of history.
! 
! Reading 23248 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/opt64/bin/pima_mupet_02.dfm J1335-2950_C]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 60
float amp_soltime2
amp_soltime2 = 5
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.1
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_02.dvm version of 2017.12.26 === "
! === Difmap script: pima_mupet_02.dvm version of 2017.12.26 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.0366645 Jy 
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 5 telescope corrections were flagged in sub-array 1.
!  A total of 35 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 5 telescope corrections were flagged in sub-array 1.
!  A total of 35 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 5 telescope corrections were flagged in sub-array 1.
!  A total of 35 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 5 telescope corrections were flagged in sub-array 1.
!  A total of 35 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 5.
!  A total of 5 telescope corrections were flagged in sub-array 1.
!  A total of 35 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 6.
!  A total of 5 telescope corrections were flagged in sub-array 1.
!  A total of 35 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 7.
!  A total of 5 telescope corrections were flagged in sub-array 1.
!  A total of 35 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 8.
!  A total of 5 telescope corrections were flagged in sub-array 1.
!  A total of 35 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.000979Jy  sigma=22.373825
! Fit after  self-cal, rms=0.984066Jy  sigma=22.090830
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
peakwin win_mult
! Inverting map and beam 
! Estimated beam: bmin=1.534 mas, bmaj=11.13 mas, bpa=-20.87 degrees
! Estimated noise=0.552685 mJy/beam.
! Added new window around map position (0, 0).
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0149082 Jy
! Component: 100  -  total flux cleaned = 0.0154355 Jy
! Total flux subtracted in 100 components = 0.0154355 Jy
! Clean residual min=-0.001492 max=0.001742 Jy/beam
! Clean residual mean=0.000003 rms=0.000433 Jy/beam
! Combined flux in latest and established models = 0.0154355 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.0154355 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032557Jy  sigma=0.615387
! Fit after  self-cal, rms=0.032551Jy  sigma=0.615212
! Inverting map 
print "============== Finished uniform weighting CLEAN =============="
! ============== Finished uniform weighting CLEAN ============== 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.214 mas, bmaj=12.34 mas, bpa=-20.04 degrees
! Estimated noise=0.208005 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.001141 Jy
! Component: 100  -  total flux cleaned = -0.00161025 Jy
! Component: 150  -  total flux cleaned = -0.00178495 Jy
! Component: 200  -  total flux cleaned = -0.00191191 Jy
! Total flux subtracted in 200 components = -0.00191191 Jy
! Clean residual min=-0.000921 max=0.001110 Jy/beam
! Clean residual mean=0.000004 rms=0.000264 Jy/beam
! Combined flux in latest and established models = 0.0135236 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 38 model components to the UV plane model.
! The established model now contains 47 components and 0.0135236 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032508Jy  sigma=0.614389
! Fit after  self-cal, rms=0.032507Jy  sigma=0.614373
! Inverting map 
print "============== Finished natural weighting CLEAN =============="
! ============== Finished natural weighting CLEAN ============== 
! 
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 1.02065
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        0.85     KP        1.30     LA        0.97     
!   MK        0.87     NL        0.92     PT        1.03     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 1.06808
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.96     FD        0.65     KP        0.99     NL        0.88     
!   OV        1.04     PT        1.10     
! 
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 1.03579
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.92     KP        1.14     LA        0.87     
!   MK        1.01     NL        0.78     PT        1.04     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 1.03595
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.96     FD        0.70     KP        1.00     NL        1.12     
!   OV        1.15     PT        0.86     
! 
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 0.976518
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.03     KP        1.16     LA        0.98     
!   MK        0.80     NL        0.87     PT        1.25     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.96009
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.01     FD        0.85     KP        1.07     NL        0.90     
!   OV        1.45     PT        0.95     
! 
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 0.975119
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.96     KP        1.16     LA        0.88     
!   MK        0.98     NL        0.99     PT        1.19     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 1.04308
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.75     FD        0.81     KP        1.09     NL        1.07     
!   OV        0.96     PT        1.08     
! 
! 
! Correcting IF 5.
!  Amplitude normalization factor in sub-array 1: 1.0248
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.63     FD        1.05     KP        1.24     LA        1.01     
!   MK        0.94     NL        0.90     PT        1.07     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 1.08742
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.33     FD        1.04     KP        1.10     NL        0.98     
!   OV        1.08     PT        0.98     
! 
! 
! Correcting IF 6.
!  Amplitude normalization factor in sub-array 1: 0.927358
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.16     FD        1.06     KP        1.19     LA        0.92     
!   MK        1.16     NL        1.07     PT        1.00     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.949348
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.02     FD        1.17     KP        1.17     NL        0.97     
!   OV        1.11     PT        0.87     
! 
! 
! Correcting IF 7.
!  Amplitude normalization factor in sub-array 1: 0.891216
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.19     KP        1.34     LA        0.87     
!   MK        1.18     NL        1.02     PT        1.26     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.964533
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.13     FD        1.10     KP        0.97     NL        0.93     
!   OV        1.16     PT        0.93     
! 
! 
! Correcting IF 8.
!  Amplitude normalization factor in sub-array 1: 0.915603
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.16     KP        1.38     LA        0.89     
!   MK        1.00     NL        1.11     PT        1.04     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.973105
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.86     FD        1.13     KP        0.87     NL        0.93     
!   OV        1.13     PT        1.25     
! 
! 
! Fit before self-cal, rms=0.032507Jy  sigma=0.614373
! Fit after  self-cal, rms=0.029921Jy  sigma=0.610603
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029921Jy  sigma=0.610603
! Fit after  self-cal, rms=0.029925Jy  sigma=0.610583
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.193 mas, bmaj=11.94 mas, bpa=-19.96 degrees
! Estimated noise=0.194518 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000549064 Jy
! Component: 100  -  total flux cleaned = -0.000561962 Jy
! Component: 150  -  total flux cleaned = -0.000546465 Jy
! Component: 200  -  total flux cleaned = -0.00053375 Jy
! Total flux subtracted in 200 components = -0.00053375 Jy
! Clean residual min=-0.000611 max=0.000579 Jy/beam
! Clean residual mean=0.000002 rms=0.000149 Jy/beam
! Combined flux in latest and established models = 0.0129898 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 18 model components to the UV plane model.
! The established model now contains 62 components and 0.0129898 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029918Jy  sigma=0.610335
! Fit after  self-cal, rms=0.029917Jy  sigma=0.610332
! Inverting map 
print "============== Finished amplitude gscale SELF-CAL =============="
! ============== Finished amplitude gscale SELF-CAL ============== 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029917Jy  sigma=0.610332
! Fit after  self-cal, rms=0.029885Jy  sigma=0.609147
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 5.99815e-05 Jy
! Component: 100  -  total flux cleaned = 6.0789e-05 Jy
! Component: 150  -  total flux cleaned = 4.64178e-05 Jy
! Component: 200  -  total flux cleaned = 3.76259e-05 Jy
! Total flux subtracted in 200 components = 3.76259e-05 Jy
! Clean residual min=-0.000601 max=0.000556 Jy/beam
! Clean residual mean=0.000002 rms=0.000146 Jy/beam
! Combined flux in latest and established models = 0.0130274 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 22 model components to the UV plane model.
! The established model now contains 82 components and 0.0130274 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029882Jy  sigma=0.609111
! Fit after  self-cal, rms=0.029882Jy  sigma=0.609050
! Inverting map 
print "=== Finished natural weighting clean with shorter phase_soltime "
! === Finished natural weighting clean with shorter phase_soltime  
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.193 x 11.94 at -19.96 degrees (North through East)
! Clean map  min=-0.00063867  max=0.016212 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "============== Finished amplitude self-cal =============="
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.527 mas, bmaj=10.7 mas, bpa=-20.88 degrees
! Estimated noise=0.521777 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0141534 Jy
! Component: 100  -  total flux cleaned = 0.0149818 Jy
! Component: 150  -  total flux cleaned = 0.0145304 Jy
! Component: 200  -  total flux cleaned = 0.0141511 Jy
! Total flux subtracted in 200 components = 0.0141511 Jy
! Clean residual min=-0.001123 max=0.001123 Jy/beam
! Clean residual mean=0.000001 rms=0.000293 Jy/beam
! Combined flux in latest and established models = 0.0141511 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.0141511 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.193 mas, bmaj=11.94 mas, bpa=-19.96 degrees
! Estimated noise=0.194518 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000685323 Jy
! Component: 100  -  total flux cleaned = -0.000963141 Jy
! Component: 150  -  total flux cleaned = -0.0010043 Jy
! Component: 200  -  total flux cleaned = -0.00103709 Jy
! Total flux subtracted in 200 components = -0.00103709 Jy
! Clean residual min=-0.000611 max=0.000605 Jy/beam
! Clean residual mean=0.000002 rms=0.000149 Jy/beam
! Combined flux in latest and established models = 0.013114 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 40 components and 0.013114 Jy
! Inverting map 
clean
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -1.99108e-05 Jy
! Component: 100  -  total flux cleaned = -2.5564e-05 Jy
! Component: 150  -  total flux cleaned = -3.05545e-05 Jy
! Component: 200  -  total flux cleaned = -3.06036e-05 Jy
! Total flux subtracted in 200 components = -3.06036e-05 Jy
! Clean residual min=-0.000604 max=0.000580 Jy/beam
! Clean residual mean=0.000002 rms=0.000147 Jy/beam
! Combined flux in latest and established models = 0.0130834 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 30 model components to the UV plane model.
! The established model now contains 59 components and 0.0130834 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029883Jy  sigma=0.609067
! Fit after  self-cal, rms=0.029884Jy  sigma=0.609097
wmodel J1335-2950_C_map.mod
! Writing 59 model components to file: J1335-2950_C_map.mod
wobs   J1335-2950_C_uvs.fits
! Writing UV FITS file: J1335-2950_C_uvs.fits
wwins  J1335-2950_C_map.win
! wwins: Wrote 1 windows to J1335-2950_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -7.97043e-05 Jy
! Component: 100  -  total flux cleaned = -5.2571e-05 Jy
! Component: 150  -  total flux cleaned = -1.9608e-05 Jy
! Component: 200  -  total flux cleaned = 1.68741e-05 Jy
! Component: 250  -  total flux cleaned = 6.55775e-05 Jy
! Component: 300  -  total flux cleaned = 0.00013793 Jy
! Component: 350  -  total flux cleaned = 0.000181782 Jy
! Component: 400  -  total flux cleaned = 0.000205737 Jy
! Component: 450  -  total flux cleaned = 0.000205778 Jy
! Component: 500  -  total flux cleaned = 0.000189169 Jy
! Component: 550  -  total flux cleaned = 0.000183801 Jy
! Component: 600  -  total flux cleaned = 0.000188947 Jy
! Component: 650  -  total flux cleaned = 0.000198948 Jy
! Component: 700  -  total flux cleaned = 0.000193994 Jy
! Component: 750  -  total flux cleaned = 0.0001892 Jy
! Component: 800  -  total flux cleaned = 0.000184525 Jy
! Component: 850  -  total flux cleaned = 0.000184503 Jy
! Component: 900  -  total flux cleaned = 0.000193422 Jy
! Component: 950  -  total flux cleaned = 0.000193419 Jy
! Component: 1000  -  total flux cleaned = 0.000184817 Jy
! Component: 1050  -  total flux cleaned = 0.000180544 Jy
! Component: 1100  -  total flux cleaned = 0.000180484 Jy
! Component: 1150  -  total flux cleaned = 0.00016424 Jy
! Component: 1200  -  total flux cleaned = 0.000152345 Jy
! Component: 1250  -  total flux cleaned = 0.00015244 Jy
! Component: 1300  -  total flux cleaned = 0.000140886 Jy
! Component: 1350  -  total flux cleaned = 0.000133296 Jy
! Component: 1400  -  total flux cleaned = 0.000140791 Jy
! Component: 1450  -  total flux cleaned = 0.000122276 Jy
! Component: 1500  -  total flux cleaned = 0.000115058 Jy
! Component: 1550  -  total flux cleaned = 0.000107844 Jy
! Component: 1600  -  total flux cleaned = 9.71678e-05 Jy
! Component: 1650  -  total flux cleaned = 9.01693e-05 Jy
! Component: 1700  -  total flux cleaned = 8.66969e-05 Jy
! Component: 1750  -  total flux cleaned = 7.98312e-05 Jy
! Component: 1800  -  total flux cleaned = 7.30495e-05 Jy
! Component: 1850  -  total flux cleaned = 6.63208e-05 Jy
! Component: 1900  -  total flux cleaned = 6.63113e-05 Jy
! Component: 1950  -  total flux cleaned = 4.97111e-05 Jy
! Component: 2000  -  total flux cleaned = 4.31301e-05 Jy
! Component: 2050  -  total flux cleaned = 2.35277e-05 Jy
! Component: 2100  -  total flux cleaned = 1.38312e-05 Jy
! Component: 2150  -  total flux cleaned = 4.19134e-06 Jy
! Component: 2200  -  total flux cleaned = 1.0282e-06 Jy
! Component: 2250  -  total flux cleaned = -8.48485e-06 Jy
! Component: 2300  -  total flux cleaned = -1.79368e-05 Jy
! Component: 2350  -  total flux cleaned = -2.7305e-05 Jy
! Component: 2400  -  total flux cleaned = -3.35148e-05 Jy
! Component: 2450  -  total flux cleaned = -4.58657e-05 Jy
! Component: 2500  -  total flux cleaned = -4.89188e-05 Jy
! Component: 2550  -  total flux cleaned = -5.50334e-05 Jy
! Component: 2600  -  total flux cleaned = -6.10723e-05 Jy
! Component: 2650  -  total flux cleaned = -6.70631e-05 Jy
! Component: 2700  -  total flux cleaned = -6.706e-05 Jy
! Component: 2750  -  total flux cleaned = -7.0015e-05 Jy
! Component: 2800  -  total flux cleaned = -7.29651e-05 Jy
! Component: 2850  -  total flux cleaned = -7.29286e-05 Jy
! Component: 2900  -  total flux cleaned = -7.2932e-05 Jy
! Component: 2950  -  total flux cleaned = -7.00386e-05 Jy
! Component: 3000  -  total flux cleaned = -6.43123e-05 Jy
! Component: 3050  -  total flux cleaned = -7.00408e-05 Jy
! Component: 3100  -  total flux cleaned = -7.00452e-05 Jy
! Component: 3150  -  total flux cleaned = -7.00453e-05 Jy
! Component: 3200  -  total flux cleaned = -7.28589e-05 Jy
! Component: 3250  -  total flux cleaned = -7.84331e-05 Jy
! Component: 3300  -  total flux cleaned = -8.39764e-05 Jy
! Component: 3350  -  total flux cleaned = -8.39688e-05 Jy
! Component: 3400  -  total flux cleaned = -9.22339e-05 Jy
! Component: 3450  -  total flux cleaned = -9.22332e-05 Jy
! Component: 3500  -  total flux cleaned = -9.76958e-05 Jy
! Component: 3550  -  total flux cleaned = -9.22492e-05 Jy
! Component: 3600  -  total flux cleaned = -9.76701e-05 Jy
! Component: 3650  -  total flux cleaned = -0.000105765 Jy
! Component: 3700  -  total flux cleaned = -9.76817e-05 Jy
! Component: 3750  -  total flux cleaned = -0.000105724 Jy
! Component: 3800  -  total flux cleaned = -0.000113745 Jy
! Component: 3850  -  total flux cleaned = -0.000111059 Jy
! Component: 3900  -  total flux cleaned = -0.000116367 Jy
! Component: 3950  -  total flux cleaned = -0.000113723 Jy
! Component: 4000  -  total flux cleaned = -0.000121662 Jy
! Component: 4050  -  total flux cleaned = -0.000124291 Jy
! Total flux subtracted in 4096 components = -0.000124289 Jy
! Clean residual min=-0.000138 max=0.000140 Jy/beam
! Clean residual mean=-0.000001 rms=0.000051 Jy/beam
! Combined flux in latest and established models = 0.0129591 Jy
keep
! Adding 284 model components to the UV plane model.
! The established model now contains 343 components and 0.0129591 Jy
![Exited script file: /opt64/bin/pima_mupet_02.dfm]
wmap   /vlbi/vcs9/uvm//J1335-2950_C_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.193 x 11.94 at -19.96 degrees (North through East)
! Clean map  min=-0.00070844  max=0.01608 Jy/beam
! Writing clean map to FITS file: /vlbi/vcs9/uvm//J1335-2950_C_a_map.fits
wmodel /vlbi/vcs9/uvm//J1335-2950_C_a_map.mod
! Writing 343 model components to file: /vlbi/vcs9/uvm//J1335-2950_C_a_map.mod
wobs   /vlbi/vcs9/uvm//J1335-2950_C_a_uvs.fits
! Writing UV FITS file: /vlbi/vcs9/uvm//J1335-2950_C_a_uvs.fits
wwins  /vlbi/vcs9/uvm//J1335-2950_C_a_map.win
! wwins: Wrote 2 windows to /vlbi/vcs9/uvm//J1335-2950_C_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0160799 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 5.0996e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.951423 0.951423 1.90285 3.80569 7.61139 15.2228 30.4455 60.8911
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.016 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  315.317 
quit
! Quitting program
! Log file /vlbi/vcs9/uvm//J1335-2950_C_a_dfm.log closed on Tue Dec 26 22:30:29 2017