! Started logfile: /vlbi/vcs9/uvm//J1327+2210_C_a_dfm.log on Tue Dec 26 22:29:28 2017
float field_size
field_size =  1024
float field_cell
field_cell =   0.3000
float taper_size
taper_size =   40.0
float freq
freq       =    4.12800
obs     /vlbi/vcs9/uvm//J1327+2210_C_a_uvm.fits
! Reading UV FITS file: /vlbi/vcs9/uvm//J1327+2210_C_a_uvm.fits
! AN table 1: 17 integrations on 36 of 36 possible baselines.
! AN table 2: 35 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.980796 visibilities/baseline/integration-bin.
! Found source: J1327+2210
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 94 lines of history.
! 
! Reading 17160 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/opt64/bin/pima_mupet_02.dfm J1327+2210_C]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 60
float amp_soltime2
amp_soltime2 = 5
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.1
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_02.dvm version of 2017.12.26 === "
! === Difmap script: pima_mupet_02.dvm version of 2017.12.26 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.300271 Jy 
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 24 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 24 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 24 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 24 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 5.
!  A total of 24 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 6.
!  A total of 24 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 7.
!  A total of 24 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 8.
!  A total of 24 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.045171Jy  sigma=32.601120
! Fit after  self-cal, rms=0.707472Jy  sigma=21.914331
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
peakwin win_mult
! Inverting map and beam 
! Estimated beam: bmin=1.469 mas, bmaj=3.568 mas, bpa=12.63 degrees
! Estimated noise=0.279616 mJy/beam.
! Added new window around map position (0, 0).
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.241054 Jy
! Component: 100  -  total flux cleaned = 0.293674 Jy
! Total flux subtracted in 100 components = 0.293674 Jy
! Clean residual min=-0.005369 max=0.016022 Jy/beam
! Clean residual mean=0.000007 rms=0.001473 Jy/beam
! Combined flux in latest and established models = 0.293674 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.293674 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.046383Jy  sigma=1.436768
! Fit after  self-cal, rms=0.046304Jy  sigma=1.435238
! Inverting map 
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0217877 Jy
! Component: 100  -  total flux cleaned = 0.0328971 Jy
! Total flux subtracted in 100 components = 0.0328971 Jy
! Clean residual min=-0.004914 max=0.005292 Jy/beam
! Clean residual mean=0.000003 rms=0.000990 Jy/beam
! Combined flux in latest and established models = 0.326571 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 16 model components to the UV plane model.
! The established model now contains 22 components and 0.326571 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.035357Jy  sigma=1.068179
! Fit after  self-cal, rms=0.035328Jy  sigma=1.067691
! Inverting map 
print "============== Finished uniform weighting CLEAN =============="
! ============== Finished uniform weighting CLEAN ============== 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.945 mas, bmaj=4.211 mas, bpa=11.45 degrees
! Estimated noise=0.179504 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00909381 Jy
! Component: 100  -  total flux cleaned = 0.0134568 Jy
! Component: 150  -  total flux cleaned = 0.0157063 Jy
! Component: 200  -  total flux cleaned = 0.0163156 Jy
! Total flux subtracted in 200 components = 0.0163156 Jy
! Clean residual min=-0.005041 max=0.005330 Jy/beam
! Clean residual mean=0.000000 rms=0.001121 Jy/beam
! Combined flux in latest and established models = 0.342887 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 23 model components to the UV plane model.
! The established model now contains 38 components and 0.342887 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033694Jy  sigma=1.015503
! Fit after  self-cal, rms=0.033655Jy  sigma=1.014878
! Inverting map 
print "============== Finished natural weighting CLEAN =============="
! ============== Finished natural weighting CLEAN ============== 
! 
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 1.04085
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.97     HN        0.97     KP        0.92     
!   LA        0.94     NL        0.98     OV        1.01     PT        0.95     
!   SC        0.93     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 1.02017
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.99     FD        0.97     HN        0.99     KP        1.02     
!   LA        0.97     MK        0.96     NL        0.99     OV        0.96     
!   PT        0.95     SC        0.99     
! 
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 1.03468
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.97     HN        0.96     KP        0.91     
!   LA        0.94     NL        0.98     OV        1.00     PT        0.96     
!   SC        1.02     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 1.00759
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.01     FD        0.98     HN        1.01     KP        1.03     
!   LA        0.99     MK        0.98     NL        1.00     OV        0.98     
!   PT        0.96     SC        0.98     
! 
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 1.03015
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.95     HN        0.96     KP        0.95     
!   LA        0.96     NL        0.96     OV        1.00     PT        0.95     
!   SC        1.03     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.986501
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.08     FD        1.01     HN        1.02     KP        1.05     
!   LA        1.01     MK        0.98     NL        1.01     OV        1.00     
!   PT        1.00     SC        0.97     
! 
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 1.03557
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.97     HN        0.95     KP        0.94     
!   LA        0.95     NL        0.99     OV        0.98     PT        0.95     
!   SC        1.01     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.98294
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.06     FD        1.00     HN        1.04     KP        1.06     
!   LA        1.02     MK        0.98     NL        1.02     OV        1.01     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 5.
!  Amplitude normalization factor in sub-array 1: 1.02399
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.96     HN        0.97     KP        0.96     
!   LA        0.95     NL        0.98     OV        0.98     PT        0.96     
!   SC        1.02     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.975967
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.06     FD        1.01     HN        1.03     KP        1.07     
!   LA        1.03     MK        0.98     NL        1.04     OV        1.03     
!   PT        1.02     SC        1.00     
! 
! 
! Correcting IF 6.
!  Amplitude normalization factor in sub-array 1: 1.02682
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.97     HN        0.97     KP        0.96     
!   LA        0.96     NL        1.00     OV        0.95     PT        0.96     
!   SC        1.02     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.968709
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.06     FD        1.01     HN        1.04     KP        1.08     
!   LA        1.04     MK        1.00     NL        1.04     OV        1.04     
!   PT        1.01     SC        1.01     
! 
! 
! Correcting IF 7.
!  Amplitude normalization factor in sub-array 1: 1.02891
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.96     HN        0.96     KP        0.96     
!   LA        0.95     NL        0.99     OV        0.97     PT        0.96     
!   SC        1.01     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.968859
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.05     FD        1.01     HN        1.04     KP        1.08     
!   LA        1.04     MK        0.99     NL        1.05     OV        1.04     
!   PT        1.01     SC        1.02     
! 
! 
! Correcting IF 8.
!  Amplitude normalization factor in sub-array 1: 1.02759
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.97     HN        0.97     KP        0.96     
!   LA        0.96     NL        1.00     OV        0.96     PT        0.96     
!   SC        1.01     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.965331
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.06     FD        1.02     HN        1.04     KP        1.08     
!   LA        1.05     MK        0.99     NL        1.04     OV        1.04     
!   PT        1.02     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.033655Jy  sigma=1.014878
! Fit after  self-cal, rms=0.032252Jy  sigma=0.964996
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032252Jy  sigma=0.964996
! Fit after  self-cal, rms=0.032252Jy  sigma=0.964995
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.926 mas, bmaj=4.235 mas, bpa=11.15 degrees
! Estimated noise=0.178904 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000239943 Jy
! Component: 100  -  total flux cleaned = 0.000370862 Jy
! Component: 150  -  total flux cleaned = 0.000426541 Jy
! Component: 200  -  total flux cleaned = 0.000518095 Jy
! Total flux subtracted in 200 components = 0.000518095 Jy
! Clean residual min=-0.004274 max=0.004298 Jy/beam
! Clean residual mean=-0.000002 rms=0.000973 Jy/beam
! Combined flux in latest and established models = 0.343405 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 8 model components to the UV plane model.
! The established model now contains 41 components and 0.343405 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032099Jy  sigma=0.959438
! Fit after  self-cal, rms=0.032085Jy  sigma=0.959265
! Inverting map 
print "============== Finished amplitude gscale SELF-CAL =============="
! ============== Finished amplitude gscale SELF-CAL ============== 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032085Jy  sigma=0.959265
! Fit after  self-cal, rms=0.032084Jy  sigma=0.959229
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 3.24007e-06 Jy
! Component: 100  -  total flux cleaned = -0.000101359 Jy
! Component: 150  -  total flux cleaned = -0.000100212 Jy
! Component: 200  -  total flux cleaned = -0.000100519 Jy
! Total flux subtracted in 200 components = -0.000100519 Jy
! Clean residual min=-0.004295 max=0.004278 Jy/beam
! Clean residual mean=-0.000002 rms=0.000971 Jy/beam
! Combined flux in latest and established models = 0.343304 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 12 model components to the UV plane model.
! The established model now contains 47 components and 0.343304 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032041Jy  sigma=0.957657
! Fit after  self-cal, rms=0.032033Jy  sigma=0.957569
! Inverting map 
print "=== Finished natural weighting clean with shorter phase_soltime "
! === Finished natural weighting clean with shorter phase_soltime  
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.926 x 4.235 at 11.15 degrees (North through East)
! Clean map  min=-0.0042305  max=0.29434 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "============== Finished amplitude self-cal =============="
  end if
! Performing amp+phase self-cal over 60 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032033Jy  sigma=0.957569
! Fit after  self-cal, rms=0.024815Jy  sigma=0.711221
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024815Jy  sigma=0.711221
! Fit after  self-cal, rms=0.024814Jy  sigma=0.711215
! Inverting map and beam 
! Estimated beam: bmin=1.935 mas, bmaj=4.236 mas, bpa=11.1 degrees
! Estimated noise=0.178757 mJy/beam.
! Added new window around map position (-3.6, 3.9).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00396051 Jy
! Component: 100  -  total flux cleaned = 0.00520807 Jy
! Component: 150  -  total flux cleaned = 0.00555187 Jy
! Component: 200  -  total flux cleaned = 0.00584008 Jy
! Total flux subtracted in 200 components = 0.00584008 Jy
! Clean residual min=-0.001529 max=0.001486 Jy/beam
! Clean residual mean=-0.000002 rms=0.000274 Jy/beam
! Combined flux in latest and established models = 0.349144 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 33 model components to the UV plane model.
! The established model now contains 79 components and 0.349144 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024339Jy  sigma=0.694019
! Fit after  self-cal, rms=0.024296Jy  sigma=0.692933
! Inverting map 
! ============== Finished amplitude self-cal ============== 
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.461 mas, bmaj=3.575 mas, bpa=12.39 degrees
! Estimated noise=0.278794 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.240306 Jy
! Component: 100  -  total flux cleaned = 0.293934 Jy
! Component: 150  -  total flux cleaned = 0.315809 Jy
! Component: 200  -  total flux cleaned = 0.326526 Jy
! Total flux subtracted in 200 components = 0.326526 Jy
! Clean residual min=-0.002559 max=0.004069 Jy/beam
! Clean residual mean=0.000002 rms=0.000533 Jy/beam
! Combined flux in latest and established models = 0.326526 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 0.326526 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.935 mas, bmaj=4.236 mas, bpa=11.1 degrees
! Estimated noise=0.178757 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00920711 Jy
! Component: 100  -  total flux cleaned = 0.0143919 Jy
! Component: 150  -  total flux cleaned = 0.0175719 Jy
! Component: 200  -  total flux cleaned = 0.0197332 Jy
! Total flux subtracted in 200 components = 0.0197332 Jy
! Clean residual min=-0.001030 max=0.001663 Jy/beam
! Clean residual mean=-0.000002 rms=0.000293 Jy/beam
! Combined flux in latest and established models = 0.346259 Jy
! Adding 51 model components to the UV plane model.
! The established model now contains 64 components and 0.346259 Jy
! Inverting map 
! Added new window around map position (0.9, 12.9).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00207133 Jy
! Component: 100  -  total flux cleaned = 0.00349242 Jy
! Component: 150  -  total flux cleaned = 0.00432447 Jy
! Component: 200  -  total flux cleaned = 0.00468229 Jy
! Total flux subtracted in 200 components = 0.00468229 Jy
! Clean residual min=-0.000960 max=0.001115 Jy/beam
! Clean residual mean=-0.000002 rms=0.000236 Jy/beam
! Combined flux in latest and established models = 0.350941 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 84 components and 0.350941 Jy
! Inverting map 
! Added new window around map position (-20.1, 15.9).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0012522 Jy
! Component: 100  -  total flux cleaned = 0.00145911 Jy
! Component: 150  -  total flux cleaned = 0.00158649 Jy
! Component: 200  -  total flux cleaned = 0.00170479 Jy
! Total flux subtracted in 200 components = 0.00170479 Jy
! Clean residual min=-0.000947 max=0.000979 Jy/beam
! Clean residual mean=-0.000001 rms=0.000216 Jy/beam
! Combined flux in latest and established models = 0.352646 Jy
! Adding 37 model components to the UV plane model.
! The established model now contains 105 components and 0.352646 Jy
! Inverting map 
! Added new window around map position (29.7, 53.1).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000926848 Jy
! Component: 100  -  total flux cleaned = 0.0011097 Jy
! Component: 150  -  total flux cleaned = 0.00107949 Jy
! Component: 200  -  total flux cleaned = 0.00115626 Jy
! Total flux subtracted in 200 components = 0.00115626 Jy
! Clean residual min=-0.000996 max=0.000909 Jy/beam
! Clean residual mean=-0.000000 rms=0.000198 Jy/beam
! Combined flux in latest and established models = 0.353802 Jy
! Adding 44 model components to the UV plane model.
! The established model now contains 136 components and 0.353802 Jy
! Inverting map 
clean
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 7.22448e-05 Jy
! Component: 100  -  total flux cleaned = 0.000164392 Jy
! Component: 150  -  total flux cleaned = 0.000230659 Jy
! Component: 200  -  total flux cleaned = 0.000294363 Jy
! Total flux subtracted in 200 components = 0.000294363 Jy
! Clean residual min=-0.000998 max=0.000887 Jy/beam
! Clean residual mean=-0.000000 rms=0.000194 Jy/beam
! Combined flux in latest and established models = 0.354097 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 48 model components to the UV plane model.
! The established model now contains 153 components and 0.354097 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023997Jy  sigma=0.683155
! Fit after  self-cal, rms=0.023975Jy  sigma=0.682594
wmodel J1327+2210_C_map.mod
! Writing 153 model components to file: J1327+2210_C_map.mod
wobs   J1327+2210_C_uvs.fits
! Writing UV FITS file: J1327+2210_C_uvs.fits
wwins  J1327+2210_C_map.win
! wwins: Wrote 5 windows to J1327+2210_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000349479 Jy
! Component: 100  -  total flux cleaned = -0.000501337 Jy
! Component: 150  -  total flux cleaned = -0.000626551 Jy
! Component: 200  -  total flux cleaned = -0.000588538 Jy
! Component: 250  -  total flux cleaned = -0.000539052 Jy
! Component: 300  -  total flux cleaned = -0.000456012 Jy
! Component: 350  -  total flux cleaned = -0.000398506 Jy
! Component: 400  -  total flux cleaned = -0.000376015 Jy
! Component: 450  -  total flux cleaned = -0.000343128 Jy
! Component: 500  -  total flux cleaned = -0.000343369 Jy
! Component: 550  -  total flux cleaned = -0.000322332 Jy
! Component: 600  -  total flux cleaned = -0.000312181 Jy
! Component: 650  -  total flux cleaned = -0.000281722 Jy
! Component: 700  -  total flux cleaned = -0.000251451 Jy
! Component: 750  -  total flux cleaned = -0.000231576 Jy
! Component: 800  -  total flux cleaned = -0.000211973 Jy
! Component: 850  -  total flux cleaned = -0.000211816 Jy
! Component: 900  -  total flux cleaned = -0.000173569 Jy
! Component: 950  -  total flux cleaned = -0.000145499 Jy
! Component: 1000  -  total flux cleaned = -0.000164169 Jy
! Component: 1050  -  total flux cleaned = -0.000154892 Jy
! Component: 1100  -  total flux cleaned = -0.000136672 Jy
! Component: 1150  -  total flux cleaned = -0.00011872 Jy
! Component: 1200  -  total flux cleaned = -9.23389e-05 Jy
! Component: 1250  -  total flux cleaned = -9.23951e-05 Jy
! Component: 1300  -  total flux cleaned = -0.000126839 Jy
! Component: 1350  -  total flux cleaned = -0.000100932 Jy
! Component: 1400  -  total flux cleaned = -6.69318e-05 Jy
! Component: 1450  -  total flux cleaned = -7.54453e-05 Jy
! Component: 1500  -  total flux cleaned = -7.55427e-05 Jy
! Component: 1550  -  total flux cleaned = -5.08183e-05 Jy
! Component: 1600  -  total flux cleaned = -3.44233e-05 Jy
! Component: 1650  -  total flux cleaned = -1.8311e-05 Jy
! Component: 1700  -  total flux cleaned = 3.78012e-05 Jy
! Component: 1750  -  total flux cleaned = 2.96652e-05 Jy
! Component: 1800  -  total flux cleaned = 2.97024e-05 Jy
! Component: 1850  -  total flux cleaned = 4.53577e-05 Jy
! Component: 1900  -  total flux cleaned = 4.53879e-05 Jy
! Component: 1950  -  total flux cleaned = 9.15213e-05 Jy
! Component: 2000  -  total flux cleaned = 9.14582e-05 Jy
! Component: 2050  -  total flux cleaned = 4.60878e-05 Jy
! Component: 2100  -  total flux cleaned = 8.36561e-05 Jy
! Component: 2150  -  total flux cleaned = 0.00010613 Jy
! Component: 2200  -  total flux cleaned = 9.85875e-05 Jy
! Component: 2250  -  total flux cleaned = 0.000105842 Jy
! Component: 2300  -  total flux cleaned = 0.000105869 Jy
! Component: 2350  -  total flux cleaned = 0.000113107 Jy
! Component: 2400  -  total flux cleaned = 0.00011321 Jy
! Component: 2450  -  total flux cleaned = 0.00011331 Jy
! Component: 2500  -  total flux cleaned = 0.000141625 Jy
! Component: 2550  -  total flux cleaned = 0.000134548 Jy
! Component: 2600  -  total flux cleaned = 0.000155429 Jy
! Component: 2650  -  total flux cleaned = 0.000141639 Jy
! Component: 2700  -  total flux cleaned = 0.000148584 Jy
! Component: 2750  -  total flux cleaned = 0.00014171 Jy
! Component: 2800  -  total flux cleaned = 0.000114618 Jy
! Component: 2850  -  total flux cleaned = 0.000128224 Jy
! Component: 2900  -  total flux cleaned = 0.00013491 Jy
! Component: 2950  -  total flux cleaned = 0.000141602 Jy
! Component: 3000  -  total flux cleaned = 0.000128426 Jy
! Component: 3050  -  total flux cleaned = 0.000148198 Jy
! Component: 3100  -  total flux cleaned = 0.000161225 Jy
! Component: 3150  -  total flux cleaned = 0.000135282 Jy
! Component: 3200  -  total flux cleaned = 0.000141735 Jy
! Component: 3250  -  total flux cleaned = 0.000135355 Jy
! Component: 3300  -  total flux cleaned = 0.000160896 Jy
! Component: 3350  -  total flux cleaned = 0.000160941 Jy
! Component: 3400  -  total flux cleaned = 0.000154558 Jy
! Component: 3450  -  total flux cleaned = 0.000179599 Jy
! Component: 3500  -  total flux cleaned = 0.000179593 Jy
! Component: 3550  -  total flux cleaned = 0.000191999 Jy
! Component: 3600  -  total flux cleaned = 0.000210405 Jy
! Component: 3650  -  total flux cleaned = 0.000234872 Jy
! Component: 3700  -  total flux cleaned = 0.000216626 Jy
! Component: 3750  -  total flux cleaned = 0.000210578 Jy
! Component: 3800  -  total flux cleaned = 0.000204607 Jy
! Component: 3850  -  total flux cleaned = 0.000216602 Jy
! Component: 3900  -  total flux cleaned = 0.000216624 Jy
! Component: 3950  -  total flux cleaned = 0.000204817 Jy
! Component: 4000  -  total flux cleaned = 0.000240211 Jy
! Component: 4050  -  total flux cleaned = 0.000246085 Jy
! Total flux subtracted in 4096 components = 0.000216978 Jy
! Clean residual min=-0.000348 max=0.000333 Jy/beam
! Clean residual mean=-0.000000 rms=0.000109 Jy/beam
! Combined flux in latest and established models = 0.354314 Jy
keep
! Adding 304 model components to the UV plane model.
! The established model now contains 457 components and 0.354314 Jy
![Exited script file: /opt64/bin/pima_mupet_02.dfm]
wmap   /vlbi/vcs9/uvm//J1327+2210_C_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.935 x 4.236 at 11.1 degrees (North through East)
! Clean map  min=-0.00074206  max=0.29512 Jy/beam
! Writing clean map to FITS file: /vlbi/vcs9/uvm//J1327+2210_C_a_map.fits
wmodel /vlbi/vcs9/uvm//J1327+2210_C_a_map.mod
! Writing 457 model components to file: /vlbi/vcs9/uvm//J1327+2210_C_a_map.mod
wobs   /vlbi/vcs9/uvm//J1327+2210_C_a_uvs.fits
! Writing UV FITS file: /vlbi/vcs9/uvm//J1327+2210_C_a_uvs.fits
wwins  /vlbi/vcs9/uvm//J1327+2210_C_a_map.win
! wwins: Wrote 6 windows to /vlbi/vcs9/uvm//J1327+2210_C_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.295122 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000108029 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.109814 0.109814 0.219629 0.439257 0.878514 1.75703 3.51406 7.02811 14.0562 28.1125 56.2249
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.295 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  2731.89 
quit
! Quitting program
! Log file /vlbi/vcs9/uvm//J1327+2210_C_a_dfm.log closed on Tue Dec 26 22:29:32 2017