! Started logfile: /vlbi/vcs9/uvm//J1319-0049_C_a_dfm.log on Tue Dec 26 22:28:51 2017
float field_size
field_size =  1024
float field_cell
field_cell =   0.3000
float taper_size
taper_size =   40.0
float freq
freq       =    4.12800
obs     /vlbi/vcs9/uvm//J1319-0049_C_a_uvm.fits
! Reading UV FITS file: /vlbi/vcs9/uvm//J1319-0049_C_a_uvm.fits
! AN table 1: 63 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.902646 visibilities/baseline/integration-bin.
! Found source: J1319-0049
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 94 lines of history.
! 
! Reading 20472 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/opt64/bin/pima_mupet_02.dfm J1319-0049_C]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 60
float amp_soltime2
amp_soltime2 = 5
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.1
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_02.dvm version of 2017.12.26 === "
! === Difmap script: pima_mupet_02.dvm version of 2017.12.26 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.216632 Jy 
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.013837Jy  sigma=28.394806
! Fit after  self-cal, rms=0.791289Jy  sigma=22.093710
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
peakwin win_mult
! Inverting map and beam 
! Estimated beam: bmin=1.341 mas, bmaj=3.385 mas, bpa=-3.086 degrees
! Estimated noise=0.258988 mJy/beam.
! Added new window around map position (0, 0).
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.176223 Jy
! Component: 100  -  total flux cleaned = 0.208289 Jy
! Total flux subtracted in 100 components = 0.208289 Jy
! Clean residual min=-0.006088 max=0.014971 Jy/beam
! Clean residual mean=-0.000000 rms=0.001454 Jy/beam
! Combined flux in latest and established models = 0.208289 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.208289 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.049211Jy  sigma=1.379861
! Fit after  self-cal, rms=0.049190Jy  sigma=1.379444
! Inverting map 
! Added new window around map position (-22.8, -39.9).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0184533 Jy
! Component: 100  -  total flux cleaned = 0.0301556 Jy
! Total flux subtracted in 100 components = 0.0301556 Jy
! Clean residual min=-0.005047 max=0.007400 Jy/beam
! Clean residual mean=0.000001 rms=0.001048 Jy/beam
! Combined flux in latest and established models = 0.238444 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 23 model components to the UV plane model.
! The established model now contains 30 components and 0.238444 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.040649Jy  sigma=1.087235
! Fit after  self-cal, rms=0.040170Jy  sigma=1.075332
! Inverting map 
! Added new window around map position (-20.4, -39.9).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0104636 Jy
! Component: 100  -  total flux cleaned = 0.0179065 Jy
! Total flux subtracted in 100 components = 0.0179065 Jy
! Clean residual min=-0.003908 max=0.003788 Jy/beam
! Clean residual mean=0.000001 rms=0.000802 Jy/beam
! Combined flux in latest and established models = 0.256351 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 29 model components to the UV plane model.
! The established model now contains 55 components and 0.256351 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.036403Jy  sigma=0.939523
! Fit after  self-cal, rms=0.036166Jy  sigma=0.934363
! Inverting map 
print "============== Finished uniform weighting CLEAN =============="
! ============== Finished uniform weighting CLEAN ============== 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.847 mas, bmaj=4.298 mas, bpa=-1.92 degrees
! Estimated noise=0.175975 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0123978 Jy
! Component: 100  -  total flux cleaned = 0.0197556 Jy
! Component: 150  -  total flux cleaned = 0.0249158 Jy
! Component: 200  -  total flux cleaned = 0.0286469 Jy
! Total flux subtracted in 200 components = 0.0286469 Jy
! Clean residual min=-0.003146 max=0.004219 Jy/beam
! Clean residual mean=-0.000003 rms=0.000917 Jy/beam
! Combined flux in latest and established models = 0.284998 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 76 model components to the UV plane model.
! The established model now contains 116 components and 0.284998 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033202Jy  sigma=0.820652
! Fit after  self-cal, rms=0.032764Jy  sigma=0.807702
! Inverting map 
print "============== Finished natural weighting CLEAN =============="
! ============== Finished natural weighting CLEAN ============== 
! 
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.981194
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.03     HN        1.00     KP        1.02     
!   LA        1.07     MK        1.01     NL        1.03     OV        1.05     
!   PT        1.03     SC        0.97     
! 
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.989845
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        1.05     KP        0.99     
!   LA        0.98     MK        1.00     NL        1.02     OV        1.04     
!   PT        1.02     SC        1.01     
! 
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.99908
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.98     HN        1.00     KP        0.99     
!   LA        0.99     MK        1.02     NL        1.00     OV        1.00     
!   PT        1.03     SC        1.01     
! 
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.01541
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        1.01     KP        0.99     
!   LA        0.95     MK        0.99     NL        0.99     OV        0.98     
!   PT        0.97     SC        1.00     
! 
! 
! Correcting IF 5.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.00264
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        1.00     KP        0.99     
!   LA        0.99     MK        1.00     NL        1.00     OV        0.99     
!   PT        1.01     SC        1.02     
! 
! 
! Correcting IF 6.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.00589
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        0.99     KP        0.99     
!   LA        0.99     MK        0.98     NL        1.01     OV        0.97     
!   PT        1.01     SC        1.02     
! 
! 
! Correcting IF 7.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.00577
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        1.00     KP        0.99     
!   LA        0.98     MK        1.00     NL        1.00     OV        0.98     
!   PT        1.02     SC        1.00     
! 
! 
! Correcting IF 8.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.00547
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        1.00     KP        0.99     
!   LA        0.98     MK        1.00     NL        1.01     OV        0.97     
!   PT        1.00     SC        1.02     
! 
! 
! Fit before self-cal, rms=0.032764Jy  sigma=0.807702
! Fit after  self-cal, rms=0.032310Jy  sigma=0.793665
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032310Jy  sigma=0.793665
! Fit after  self-cal, rms=0.032311Jy  sigma=0.793661
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.857 mas, bmaj=4.317 mas, bpa=-2.035 degrees
! Estimated noise=0.175638 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00376051 Jy
! Component: 100  -  total flux cleaned = 0.0060049 Jy
! Component: 150  -  total flux cleaned = 0.00751204 Jy
! Component: 200  -  total flux cleaned = 0.00808705 Jy
! Total flux subtracted in 200 components = 0.00808705 Jy
! Clean residual min=-0.002307 max=0.003370 Jy/beam
! Clean residual mean=-0.000002 rms=0.000754 Jy/beam
! Combined flux in latest and established models = 0.293085 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 37 model components to the UV plane model.
! The established model now contains 136 components and 0.293085 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031995Jy  sigma=0.781955
! Fit after  self-cal, rms=0.031925Jy  sigma=0.780328
! Inverting map 
print "============== Finished amplitude gscale SELF-CAL =============="
! ============== Finished amplitude gscale SELF-CAL ============== 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031925Jy  sigma=0.780328
! Fit after  self-cal, rms=0.031896Jy  sigma=0.779376
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00102884 Jy
! Component: 100  -  total flux cleaned = 0.00148657 Jy
! Component: 150  -  total flux cleaned = 0.00176229 Jy
! Component: 200  -  total flux cleaned = 0.00201509 Jy
! Total flux subtracted in 200 components = 0.00201509 Jy
! Clean residual min=-0.002172 max=0.003309 Jy/beam
! Clean residual mean=-0.000002 rms=0.000731 Jy/beam
! Combined flux in latest and established models = 0.2951 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 23 model components to the UV plane model.
! The established model now contains 139 components and 0.2951 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031816Jy  sigma=0.776630
! Fit after  self-cal, rms=0.031790Jy  sigma=0.776023
! Inverting map 
print "=== Finished natural weighting clean with shorter phase_soltime "
! === Finished natural weighting clean with shorter phase_soltime  
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.857 x 4.317 at -2.035 degrees (North through East)
! Clean map  min=-0.0021045  max=0.21164 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "============== Finished amplitude self-cal =============="
  end if
! Performing amp+phase self-cal over 60 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031790Jy  sigma=0.776023
! Fit after  self-cal, rms=0.030364Jy  sigma=0.725674
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030364Jy  sigma=0.725674
! Fit after  self-cal, rms=0.030360Jy  sigma=0.725536
! Inverting map and beam 
! Estimated beam: bmin=1.85 mas, bmaj=4.308 mas, bpa=-2.213 degrees
! Estimated noise=0.175006 mJy/beam.
! Added new window around map position (0.6, -55.2).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00360098 Jy
! Component: 100  -  total flux cleaned = 0.005388 Jy
! Component: 150  -  total flux cleaned = 0.00672299 Jy
! Component: 200  -  total flux cleaned = 0.00780863 Jy
! Total flux subtracted in 200 components = 0.00780863 Jy
! Clean residual min=-0.002011 max=0.002560 Jy/beam
! Clean residual mean=-0.000001 rms=0.000555 Jy/beam
! Combined flux in latest and established models = 0.302908 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 52 model components to the UV plane model.
! The established model now contains 180 components and 0.302908 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030101Jy  sigma=0.714464
! Fit after  self-cal, rms=0.030086Jy  sigma=0.714100
! Inverting map 
! Added new window around map position (-5.7, -18.6).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00286895 Jy
! Component: 100  -  total flux cleaned = 0.00427106 Jy
! Component: 150  -  total flux cleaned = 0.00524412 Jy
! Component: 200  -  total flux cleaned = 0.00602334 Jy
! Total flux subtracted in 200 components = 0.00602334 Jy
! Clean residual min=-0.001929 max=0.002151 Jy/beam
! Clean residual mean=-0.000001 rms=0.000497 Jy/beam
! Combined flux in latest and established models = 0.308932 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 57 model components to the UV plane model.
! The established model now contains 224 components and 0.308932 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029882Jy  sigma=0.706696
! Fit after  self-cal, rms=0.029871Jy  sigma=0.706427
! Inverting map 
! Added new window around map position (-17.4, -36).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00270551 Jy
! Component: 100  -  total flux cleaned = 0.00416205 Jy
! Component: 150  -  total flux cleaned = 0.00527731 Jy
! Component: 200  -  total flux cleaned = 0.00607103 Jy
! Total flux subtracted in 200 components = 0.00607103 Jy
! Clean residual min=-0.001656 max=0.002095 Jy/beam
! Clean residual mean=-0.000001 rms=0.000405 Jy/beam
! Combined flux in latest and established models = 0.315003 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 59 model components to the UV plane model.
! The established model now contains 276 components and 0.315003 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029672Jy  sigma=0.699581
! Fit after  self-cal, rms=0.029657Jy  sigma=0.699293
! Inverting map 
! Added new window around map position (-1.2, -6.3).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00201207 Jy
! Component: 100  -  total flux cleaned = 0.00285044 Jy
! Component: 150  -  total flux cleaned = 0.00348415 Jy
! Component: 200  -  total flux cleaned = 0.00410918 Jy
! Total flux subtracted in 200 components = 0.00410918 Jy
! Clean residual min=-0.001506 max=0.001550 Jy/beam
! Clean residual mean=-0.000000 rms=0.000370 Jy/beam
! Combined flux in latest and established models = 0.319112 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 42 model components to the UV plane model.
! The established model now contains 308 components and 0.319112 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029545Jy  sigma=0.695223
! Fit after  self-cal, rms=0.029539Jy  sigma=0.695065
! Inverting map 
! ============== Finished amplitude self-cal ============== 
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.341 mas, bmaj=3.391 mas, bpa=-3.292 degrees
! Estimated noise=0.258385 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.175696 Jy
! Component: 100  -  total flux cleaned = 0.209868 Jy
! Component: 150  -  total flux cleaned = 0.229385 Jy
! Component: 200  -  total flux cleaned = 0.243009 Jy
! Total flux subtracted in 200 components = 0.243009 Jy
! Clean residual min=-0.003793 max=0.005793 Jy/beam
! Clean residual mean=0.000001 rms=0.000884 Jy/beam
! Combined flux in latest and established models = 0.243009 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 38 model components to the UV plane model.
! The established model now contains 38 components and 0.243009 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.85 mas, bmaj=4.308 mas, bpa=-2.213 degrees
! Estimated noise=0.175006 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0184249 Jy
! Component: 100  -  total flux cleaned = 0.029368 Jy
! Component: 150  -  total flux cleaned = 0.0370865 Jy
! Component: 200  -  total flux cleaned = 0.0428864 Jy
! Total flux subtracted in 200 components = 0.0428864 Jy
! Clean residual min=-0.002588 max=0.003295 Jy/beam
! Clean residual mean=-0.000002 rms=0.000789 Jy/beam
! Combined flux in latest and established models = 0.285896 Jy
! Adding 93 model components to the UV plane model.
! The established model now contains 125 components and 0.285896 Jy
! Inverting map 
clean
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00460874 Jy
! Component: 100  -  total flux cleaned = 0.0083992 Jy
! Component: 150  -  total flux cleaned = 0.0115761 Jy
! Component: 200  -  total flux cleaned = 0.0143017 Jy
! Total flux subtracted in 200 components = 0.0143017 Jy
! Clean residual min=-0.001998 max=0.002184 Jy/beam
! Clean residual mean=-0.000001 rms=0.000559 Jy/beam
! Combined flux in latest and established models = 0.300197 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 61 model components to the UV plane model.
! The established model now contains 167 components and 0.300197 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029959Jy  sigma=0.710300
! Fit after  self-cal, rms=0.029945Jy  sigma=0.709363
wmodel J1319-0049_C_map.mod
! Writing 167 model components to file: J1319-0049_C_map.mod
wobs   J1319-0049_C_uvs.fits
! Writing UV FITS file: J1319-0049_C_uvs.fits
wwins  J1319-0049_C_map.win
! wwins: Wrote 7 windows to J1319-0049_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 4.95888e-05 Jy
! Component: 100  -  total flux cleaned = -4.65297e-05 Jy
! Component: 150  -  total flux cleaned = -0.000228651 Jy
! Component: 200  -  total flux cleaned = -0.000341795 Jy
! Component: 250  -  total flux cleaned = -0.000423036 Jy
! Component: 300  -  total flux cleaned = -0.000552497 Jy
! Component: 350  -  total flux cleaned = -0.000676587 Jy
! Component: 400  -  total flux cleaned = -0.000676084 Jy
! Component: 450  -  total flux cleaned = -0.000653183 Jy
! Component: 500  -  total flux cleaned = -0.000653116 Jy
! Component: 550  -  total flux cleaned = -0.000543938 Jy
! Component: 600  -  total flux cleaned = -0.000502317 Jy
! Component: 650  -  total flux cleaned = -0.000399345 Jy
! Component: 700  -  total flux cleaned = -0.000298484 Jy
! Component: 750  -  total flux cleaned = -0.000121528 Jy
! Component: 800  -  total flux cleaned = 1.36272e-05 Jy
! Component: 850  -  total flux cleaned = 0.000201511 Jy
! Component: 900  -  total flux cleaned = 0.000348419 Jy
! Component: 950  -  total flux cleaned = 0.000510154 Jy
! Component: 1000  -  total flux cleaned = 0.00066832 Jy
! Component: 1050  -  total flux cleaned = 0.000857131 Jy
! Component: 1100  -  total flux cleaned = 0.000941088 Jy
! Component: 1150  -  total flux cleaned = 0.00105726 Jy
! Component: 1200  -  total flux cleaned = 0.001219 Jy
! Component: 1250  -  total flux cleaned = 0.00123502 Jy
! Component: 1300  -  total flux cleaned = 0.0013127 Jy
! Component: 1350  -  total flux cleaned = 0.00131268 Jy
! Component: 1400  -  total flux cleaned = 0.00134319 Jy
! Component: 1450  -  total flux cleaned = 0.00140232 Jy
! Component: 1500  -  total flux cleaned = 0.00143112 Jy
! Component: 1550  -  total flux cleaned = 0.00144533 Jy
! Component: 1600  -  total flux cleaned = 0.00151526 Jy
! Component: 1650  -  total flux cleaned = 0.00150154 Jy
! Component: 1700  -  total flux cleaned = 0.00155577 Jy
! Component: 1750  -  total flux cleaned = 0.00158231 Jy
! Component: 1800  -  total flux cleaned = 0.00152972 Jy
! Component: 1850  -  total flux cleaned = 0.00160738 Jy
! Component: 1900  -  total flux cleaned = 0.00158219 Jy
! Component: 1950  -  total flux cleaned = 0.00158235 Jy
! Component: 2000  -  total flux cleaned = 0.00163224 Jy
! Component: 2050  -  total flux cleaned = 0.00164422 Jy
! Component: 2100  -  total flux cleaned = 0.00160832 Jy
! Component: 2150  -  total flux cleaned = 0.00164419 Jy
! Component: 2200  -  total flux cleaned = 0.00164401 Jy
! Component: 2250  -  total flux cleaned = 0.00160939 Jy
! Component: 2300  -  total flux cleaned = 0.0016553 Jy
! Component: 2350  -  total flux cleaned = 0.00164377 Jy
! Component: 2400  -  total flux cleaned = 0.00165499 Jy
! Component: 2450  -  total flux cleaned = 0.00166596 Jy
! Component: 2500  -  total flux cleaned = 0.00167695 Jy
! Component: 2550  -  total flux cleaned = 0.00172015 Jy
! Component: 2600  -  total flux cleaned = 0.00173087 Jy
! Component: 2650  -  total flux cleaned = 0.00175189 Jy
! Component: 2700  -  total flux cleaned = 0.00177267 Jy
! Component: 2750  -  total flux cleaned = 0.00177272 Jy
! Component: 2800  -  total flux cleaned = 0.00179306 Jy
! Component: 2850  -  total flux cleaned = 0.00179323 Jy
! Component: 2900  -  total flux cleaned = 0.00185303 Jy
! Component: 2950  -  total flux cleaned = 0.0018331 Jy
! Component: 3000  -  total flux cleaned = 0.00185264 Jy
! Component: 3050  -  total flux cleaned = 0.00183335 Jy
! Component: 3100  -  total flux cleaned = 0.00186238 Jy
! Component: 3150  -  total flux cleaned = 0.00187181 Jy
! Component: 3200  -  total flux cleaned = 0.00190934 Jy
! Component: 3250  -  total flux cleaned = 0.00190927 Jy
! Component: 3300  -  total flux cleaned = 0.00190927 Jy
! Component: 3350  -  total flux cleaned = 0.00191844 Jy
! Component: 3400  -  total flux cleaned = 0.00190954 Jy
! Component: 3450  -  total flux cleaned = 0.00192747 Jy
! Component: 3500  -  total flux cleaned = 0.00196304 Jy
! Component: 3550  -  total flux cleaned = 0.00197192 Jy
! Component: 3600  -  total flux cleaned = 0.00198941 Jy
! Component: 3650  -  total flux cleaned = 0.00200671 Jy
! Component: 3700  -  total flux cleaned = 0.0020067 Jy
! Component: 3750  -  total flux cleaned = 0.00203212 Jy
! Component: 3800  -  total flux cleaned = 0.00205747 Jy
! Component: 3850  -  total flux cleaned = 0.00204915 Jy
! Component: 3900  -  total flux cleaned = 0.00206575 Jy
! Component: 3950  -  total flux cleaned = 0.00209873 Jy
! Component: 4000  -  total flux cleaned = 0.00210689 Jy
! Component: 4050  -  total flux cleaned = 0.0021635 Jy
! Total flux subtracted in 4096 components = 0.00220376 Jy
! Clean residual min=-0.000459 max=0.000621 Jy/beam
! Clean residual mean=-0.000002 rms=0.000164 Jy/beam
! Combined flux in latest and established models = 0.302401 Jy
keep
! Adding 401 model components to the UV plane model.
! The established model now contains 563 components and 0.302401 Jy
![Exited script file: /opt64/bin/pima_mupet_02.dfm]
wmap   /vlbi/vcs9/uvm//J1319-0049_C_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.85 x 4.308 at -2.213 degrees (North through East)
! Clean map  min=-0.00097698  max=0.21071 Jy/beam
! Writing clean map to FITS file: /vlbi/vcs9/uvm//J1319-0049_C_a_map.fits
wmodel /vlbi/vcs9/uvm//J1319-0049_C_a_map.mod
! Writing 563 model components to file: /vlbi/vcs9/uvm//J1319-0049_C_a_map.mod
wobs   /vlbi/vcs9/uvm//J1319-0049_C_a_uvs.fits
! Writing UV FITS file: /vlbi/vcs9/uvm//J1319-0049_C_a_uvs.fits
wwins  /vlbi/vcs9/uvm//J1319-0049_C_a_map.win
! wwins: Wrote 8 windows to /vlbi/vcs9/uvm//J1319-0049_C_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.210709 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000161722 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.230254 0.230254 0.460507 0.921014 1.84203 3.68406 7.36811 14.7362 29.4725 58.9449
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.21 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1302.91 
quit
! Quitting program
! Log file /vlbi/vcs9/uvm//J1319-0049_C_a_dfm.log closed on Tue Dec 26 22:28:56 2017