! Started logfile: /vlbi/vcs9/uvm//J1312-2350_X_a_dfm.log on Tue Dec 26 22:28:46 2017
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    7.39200
obs     /vlbi/vcs9/uvm//J1312-2350_X_a_uvm.fits
! Reading UV FITS file: /vlbi/vcs9/uvm//J1312-2350_X_a_uvm.fits
! AN table 1: 93 integrations on 21 of 21 possible baselines.
! AN table 2: 100 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.818476 visibilities/baseline/integration-bin.
! Found source: J1312-2350
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 85 lines of history.
! 
! Reading 36360 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_02.dfm J1312-2350_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 60
float amp_soltime2
amp_soltime2 = 5
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.1
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_02.dvm version of 2017.12.26 === "
! === Difmap script: pima_mupet_02.dvm version of 2017.12.26 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.0385163 Jy 
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 8 telescope corrections were flagged in sub-array 1.
!  A total of 64 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 8 telescope corrections were flagged in sub-array 1.
!  A total of 64 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 8 telescope corrections were flagged in sub-array 1.
!  A total of 64 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 8 telescope corrections were flagged in sub-array 1.
!  A total of 64 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 5.
!  A total of 8 telescope corrections were flagged in sub-array 1.
!  A total of 64 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 6.
!  A total of 8 telescope corrections were flagged in sub-array 1.
!  A total of 64 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 7.
!  A total of 8 telescope corrections were flagged in sub-array 1.
!  A total of 64 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 8.
!  A total of 8 telescope corrections were flagged in sub-array 1.
!  A total of 64 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.000476Jy  sigma=21.581537
! Fit after  self-cal, rms=0.984331Jy  sigma=21.249161
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
peakwin win_mult
! Inverting map and beam 
! Estimated beam: bmin=0.8538 mas, bmaj=2.834 mas, bpa=-1.926 degrees
! Estimated noise=0.351061 mJy/beam.
! Added new window around map position (0, 0).
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0143228 Jy
! Component: 100  -  total flux cleaned = 0.0161544 Jy
! Total flux subtracted in 100 components = 0.0161544 Jy
! Clean residual min=-0.001188 max=0.001182 Jy/beam
! Clean residual mean=0.000001 rms=0.000301 Jy/beam
! Combined flux in latest and established models = 0.0161544 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.0161544 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.034790Jy  sigma=0.659173
! Fit after  self-cal, rms=0.034783Jy  sigma=0.658995
! Inverting map 
print "============== Finished uniform weighting CLEAN =============="
! ============== Finished uniform weighting CLEAN ============== 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.12 mas, bmaj=3.548 mas, bpa=-4.341 degrees
! Estimated noise=0.172043 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000120452 Jy
! Component: 100  -  total flux cleaned = -0.000130029 Jy
! Component: 150  -  total flux cleaned = -0.000145753 Jy
! Component: 200  -  total flux cleaned = -0.000152677 Jy
! Total flux subtracted in 200 components = -0.000152677 Jy
! Clean residual min=-0.000687 max=0.000735 Jy/beam
! Clean residual mean=0.000002 rms=0.000174 Jy/beam
! Combined flux in latest and established models = 0.0160017 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 8 model components to the UV plane model.
! The established model now contains 12 components and 0.0160017 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.034780Jy  sigma=0.658891
! Fit after  self-cal, rms=0.034779Jy  sigma=0.658880
! Inverting map 
print "============== Finished natural weighting CLEAN =============="
! ============== Finished natural weighting CLEAN ============== 
! 
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 0.95201
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.88     FD        0.97     KP        1.02     LA        0.90     
!   MK        1.16     NL        1.06     PT        1.37     
! 
!  Amplitude normalization factor in sub-array 2: 0.97472
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.93     FD        0.96     HN        1.10     KP        1.29     
!   LA        0.92     NL        0.96     OV        0.97     PT        1.23     
!   SC        0.88     
! 
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 0.957643
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.98     KP        1.03     LA        1.12     
!   MK        1.03     NL        1.07     PT        1.05     
! 
!  Amplitude normalization factor in sub-array 2: 0.995302
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.88     FD        0.99     HN        1.08     KP        0.99     
!   LA        0.91     NL        0.88     OV        1.06     PT        1.33     
!   SC        0.93     
! 
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 0.953503
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.30     FD        0.90     KP        0.77     LA        1.09     
!   MK        0.96     NL        1.02     PT        1.30     
! 
!  Amplitude normalization factor in sub-array 2: 0.957434
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.06     FD        0.91     HN        1.13     KP        1.11     
!   LA        0.95     NL        0.87     OV        0.94     PT        1.31     
!   SC        1.11     
! 
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 0.956466
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     FD        0.88     KP        1.06     LA        1.31     
!   MK        0.86     NL        1.02     PT        1.08     
! 
!  Amplitude normalization factor in sub-array 2: 0.966775
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.03     FD        0.97     HN        1.08     KP        1.00     
!   LA        0.97     NL        1.03     OV        1.21     PT        1.07     
!   SC        0.95     
! 
! 
! Correcting IF 5.
!  Amplitude normalization factor in sub-array 1: 0.93056
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        1.03     KP        0.96     LA        1.12     
!   MK        1.15     NL        0.78     PT        1.39     
! 
!  Amplitude normalization factor in sub-array 2: 0.983785
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.98     FD        1.12     HN        1.06     KP        0.96     
!   LA        1.04     NL        0.81     OV        0.95     PT        1.07     
!   SC        1.17     
! 
! 
! Correcting IF 6.
!  Amplitude normalization factor in sub-array 1: 1.02076
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.16     FD        0.94     KP        0.90     LA        1.03     
!   MK        0.99     NL        0.79     PT        1.05     
! 
!  Amplitude normalization factor in sub-array 2: 1.01499
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.01     FD        1.14     HN        1.02     KP        0.92     
!   LA        0.83     NL        0.80     OV        0.97     PT        1.10     
!   SC        1.09     
! 
! 
! Correcting IF 7.
!  Amplitude normalization factor in sub-array 1: 1.01559
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        1.06     KP        0.76     LA        1.11     
!   MK        0.92     NL        0.83     PT        1.28     
! 
!  Amplitude normalization factor in sub-array 2: 1.05397
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.90     FD        0.85     HN        0.99     KP        0.91     
!   LA        0.99     NL        0.86     OV        0.91     PT        1.09     
!   SC        1.04     
! 
! 
! Correcting IF 8.
!  Amplitude normalization factor in sub-array 1: 1.00747
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.79     FD        0.97     KP        0.99     LA        1.19     
!   MK        0.97     NL        1.00     PT        1.05     
! 
!  Amplitude normalization factor in sub-array 2: 1.03178
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.90     FD        0.94     HN        0.90     KP        1.04     
!   LA        1.10     NL        0.94     OV        0.94     PT        1.02     
!   SC        0.94     
! 
! 
! Fit before self-cal, rms=0.034779Jy  sigma=0.658880
! Fit after  self-cal, rms=0.034684Jy  sigma=0.656884
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.034684Jy  sigma=0.656884
! Fit after  self-cal, rms=0.034685Jy  sigma=0.656868
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.114 mas, bmaj=3.539 mas, bpa=-4.892 degrees
! Estimated noise=0.164492 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000439572 Jy
! Component: 100  -  total flux cleaned = -0.00042673 Jy
! Component: 150  -  total flux cleaned = -0.000421097 Jy
! Component: 200  -  total flux cleaned = -0.000411363 Jy
! Total flux subtracted in 200 components = -0.000411363 Jy
! Clean residual min=-0.000512 max=0.000536 Jy/beam
! Clean residual mean=0.000001 rms=0.000117 Jy/beam
! Combined flux in latest and established models = 0.0155904 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 17 model components to the UV plane model.
! The established model now contains 25 components and 0.0155904 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.034685Jy  sigma=0.656746
! Fit after  self-cal, rms=0.034685Jy  sigma=0.656737
! Inverting map 
print "============== Finished amplitude gscale SELF-CAL =============="
! ============== Finished amplitude gscale SELF-CAL ============== 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.034685Jy  sigma=0.656737
! Fit after  self-cal, rms=0.034652Jy  sigma=0.655756
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-29.4, -7.8).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000409044 Jy
! Component: 100  -  total flux cleaned = 0.000408775 Jy
! Component: 150  -  total flux cleaned = 0.000451697 Jy
! Component: 200  -  total flux cleaned = 0.000480843 Jy
! Total flux subtracted in 200 components = 0.000480843 Jy
! Clean residual min=-0.000443 max=0.000453 Jy/beam
! Clean residual mean=0.000001 rms=0.000108 Jy/beam
! Combined flux in latest and established models = 0.0160712 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 28 model components to the UV plane model.
! The established model now contains 51 components and 0.0160712 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.034642Jy  sigma=0.655558
! Fit after  self-cal, rms=0.034640Jy  sigma=0.655435
! Inverting map 
print "=== Finished natural weighting clean with shorter phase_soltime "
! === Finished natural weighting clean with shorter phase_soltime  
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.114 x 3.539 at -4.892 degrees (North through East)
! Clean map  min=-0.00041947  max=0.015689 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "============== Finished amplitude self-cal =============="
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8511 mas, bmaj=2.832 mas, bpa=-2.246 degrees
! Estimated noise=0.338682 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0138982 Jy
! Component: 100  -  total flux cleaned = 0.0159603 Jy
! Component: 150  -  total flux cleaned = 0.0159625 Jy
! Component: 200  -  total flux cleaned = 0.0160891 Jy
! Total flux subtracted in 200 components = 0.0160891 Jy
! Clean residual min=-0.001006 max=0.000997 Jy/beam
! Clean residual mean=0.000000 rms=0.000255 Jy/beam
! Combined flux in latest and established models = 0.0160891 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 24 model components to the UV plane model.
! The established model now contains 24 components and 0.0160891 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.114 mas, bmaj=3.539 mas, bpa=-4.892 degrees
! Estimated noise=0.164492 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 6.5746e-05 Jy
! Component: 100  -  total flux cleaned = 0.000116478 Jy
! Component: 150  -  total flux cleaned = 0.000126913 Jy
! Component: 200  -  total flux cleaned = 0.000117989 Jy
! Total flux subtracted in 200 components = 0.000117989 Jy
! Clean residual min=-0.000442 max=0.000443 Jy/beam
! Clean residual mean=0.000001 rms=0.000110 Jy/beam
! Combined flux in latest and established models = 0.0162071 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 47 components and 0.0162071 Jy
! Inverting map 
clean
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -7.98849e-06 Jy
! Component: 100  -  total flux cleaned = -2.30976e-07 Jy
! Component: 150  -  total flux cleaned = 6.73706e-06 Jy
! Component: 200  -  total flux cleaned = 6.57189e-06 Jy
! Total flux subtracted in 200 components = 6.57189e-06 Jy
! Clean residual min=-0.000432 max=0.000435 Jy/beam
! Clean residual mean=0.000001 rms=0.000108 Jy/beam
! Combined flux in latest and established models = 0.0162137 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 21 model components to the UV plane model.
! The established model now contains 57 components and 0.0162137 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.034638Jy  sigma=0.655426
! Fit after  self-cal, rms=0.034638Jy  sigma=0.655407
wmodel J1312-2350_X_map.mod
! Writing 57 model components to file: J1312-2350_X_map.mod
wobs   J1312-2350_X_uvs.fits
! Writing UV FITS file: J1312-2350_X_uvs.fits
wwins  J1312-2350_X_map.win
! wwins: Wrote 2 windows to J1312-2350_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 7.76352e-06 Jy
! Component: 100  -  total flux cleaned = 1.51634e-05 Jy
! Component: 150  -  total flux cleaned = 2.92682e-05 Jy
! Component: 200  -  total flux cleaned = 3.56761e-05 Jy
! Component: 250  -  total flux cleaned = 6.02057e-05 Jy
! Component: 300  -  total flux cleaned = 6.60935e-05 Jy
! Component: 350  -  total flux cleaned = 8.31581e-05 Jy
! Component: 400  -  total flux cleaned = 0.000116085 Jy
! Component: 450  -  total flux cleaned = 0.000142702 Jy
! Component: 500  -  total flux cleaned = 0.000168865 Jy
! Component: 550  -  total flux cleaned = 0.000214686 Jy
! Component: 600  -  total flux cleaned = 0.000249599 Jy
! Component: 650  -  total flux cleaned = 0.000308055 Jy
! Component: 700  -  total flux cleaned = 0.000346049 Jy
! Component: 750  -  total flux cleaned = 0.000378613 Jy
! Component: 800  -  total flux cleaned = 0.000410565 Jy
! Component: 850  -  total flux cleaned = 0.000437459 Jy
! Component: 900  -  total flux cleaned = 0.000477227 Jy
! Component: 950  -  total flux cleaned = 0.000516364 Jy
! Component: 1000  -  total flux cleaned = 0.000533537 Jy
! Component: 1050  -  total flux cleaned = 0.000571489 Jy
! Component: 1100  -  total flux cleaned = 0.000604691 Jy
! Component: 1150  -  total flux cleaned = 0.000629289 Jy
! Component: 1200  -  total flux cleaned = 0.000661536 Jy
! Component: 1250  -  total flux cleaned = 0.000693419 Jy
! Component: 1300  -  total flux cleaned = 0.000724855 Jy
! Component: 1350  -  total flux cleaned = 0.000732628 Jy
! Component: 1400  -  total flux cleaned = 0.000771036 Jy
! Component: 1450  -  total flux cleaned = 0.000778712 Jy
! Component: 1500  -  total flux cleaned = 0.000808708 Jy
! Component: 1550  -  total flux cleaned = 0.000830929 Jy
! Component: 1600  -  total flux cleaned = 0.000834586 Jy
! Component: 1650  -  total flux cleaned = 0.000870735 Jy
! Component: 1700  -  total flux cleaned = 0.000877865 Jy
! Component: 1750  -  total flux cleaned = 0.000906197 Jy
! Component: 1800  -  total flux cleaned = 0.000923723 Jy
! Component: 1850  -  total flux cleaned = 0.000937585 Jy
! Component: 1900  -  total flux cleaned = 0.000961595 Jy
! Component: 1950  -  total flux cleaned = 0.000978548 Jy
! Component: 2000  -  total flux cleaned = 0.00100872 Jy
! Component: 2050  -  total flux cleaned = 0.00101862 Jy
! Component: 2100  -  total flux cleaned = 0.00102189 Jy
! Component: 2150  -  total flux cleaned = 0.00103816 Jy
! Component: 2200  -  total flux cleaned = 0.00104143 Jy
! Component: 2250  -  total flux cleaned = 0.00106381 Jy
! Component: 2300  -  total flux cleaned = 0.00107331 Jy
! Component: 2350  -  total flux cleaned = 0.0010827 Jy
! Component: 2400  -  total flux cleaned = 0.00110127 Jy
! Component: 2450  -  total flux cleaned = 0.00111967 Jy
! Component: 2500  -  total flux cleaned = 0.00113183 Jy
! Component: 2550  -  total flux cleaned = 0.00114694 Jy
! Component: 2600  -  total flux cleaned = 0.0011619 Jy
! Component: 2650  -  total flux cleaned = 0.0011797 Jy
! Component: 2700  -  total flux cleaned = 0.00120912 Jy
! Component: 2750  -  total flux cleaned = 0.00121789 Jy
! Component: 2800  -  total flux cleaned = 0.00122951 Jy
! Component: 2850  -  total flux cleaned = 0.00124964 Jy
! Component: 2900  -  total flux cleaned = 0.00125818 Jy
! Component: 2950  -  total flux cleaned = 0.00126382 Jy
! Component: 3000  -  total flux cleaned = 0.00127788 Jy
! Component: 3050  -  total flux cleaned = 0.00128068 Jy
! Component: 3100  -  total flux cleaned = 0.0012862 Jy
! Component: 3150  -  total flux cleaned = 0.00129173 Jy
! Component: 3200  -  total flux cleaned = 0.00129448 Jy
! Component: 3250  -  total flux cleaned = 0.00129993 Jy
! Component: 3300  -  total flux cleaned = 0.00131073 Jy
! Component: 3350  -  total flux cleaned = 0.00131612 Jy
! Component: 3400  -  total flux cleaned = 0.00132147 Jy
! Component: 3450  -  total flux cleaned = 0.00132677 Jy
! Component: 3500  -  total flux cleaned = 0.00133996 Jy
! Component: 3550  -  total flux cleaned = 0.00134256 Jy
! Component: 3600  -  total flux cleaned = 0.00135563 Jy
! Component: 3650  -  total flux cleaned = 0.00136081 Jy
! Component: 3700  -  total flux cleaned = 0.00136597 Jy
! Component: 3750  -  total flux cleaned = 0.00136599 Jy
! Component: 3800  -  total flux cleaned = 0.00136599 Jy
! Component: 3850  -  total flux cleaned = 0.00137872 Jy
! Component: 3900  -  total flux cleaned = 0.00138633 Jy
! Component: 3950  -  total flux cleaned = 0.00138885 Jy
! Component: 4000  -  total flux cleaned = 0.00139639 Jy
! Component: 4050  -  total flux cleaned = 0.00139891 Jy
! Total flux subtracted in 4096 components = 0.00141386 Jy
! Clean residual min=-0.000166 max=0.000161 Jy/beam
! Clean residual mean=0.000000 rms=0.000045 Jy/beam
! Combined flux in latest and established models = 0.0176275 Jy
keep
! Adding 313 model components to the UV plane model.
! The established model now contains 370 components and 0.0176275 Jy
![Exited script file: /opt64/bin/pima_mupet_02.dfm]
wmap   /vlbi/vcs9/uvm//J1312-2350_X_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.114 x 3.539 at -4.892 degrees (North through East)
! Clean map  min=-0.00039191  max=0.015588 Jy/beam
! Writing clean map to FITS file: /vlbi/vcs9/uvm//J1312-2350_X_a_map.fits
wmodel /vlbi/vcs9/uvm//J1312-2350_X_a_map.mod
! Writing 370 model components to file: /vlbi/vcs9/uvm//J1312-2350_X_a_map.mod
wobs   /vlbi/vcs9/uvm//J1312-2350_X_a_uvs.fits
! Writing UV FITS file: /vlbi/vcs9/uvm//J1312-2350_X_a_uvs.fits
wwins  /vlbi/vcs9/uvm//J1312-2350_X_a_map.win
! wwins: Wrote 3 windows to /vlbi/vcs9/uvm//J1312-2350_X_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0155885 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 4.38037e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.843002 0.843002 1.686 3.37201 6.74402 13.488 26.9761 53.9522
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.015 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  355.87 
quit
! Quitting program
! Log file /vlbi/vcs9/uvm//J1312-2350_X_a_dfm.log closed on Tue Dec 26 22:28:50 2017