! Started logfile: /vlbi/vcs9/uvm//J1304-2106_X_a_dfm.log on Tue Dec 26 22:27:38 2017 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 7.39200 obs /vlbi/vcs9/uvm//J1304-2106_X_a_uvm.fits ! Reading UV FITS file: /vlbi/vcs9/uvm//J1304-2106_X_a_uvm.fits ! AN table 1: 40 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.911111 visibilities/baseline/integration-bin. ! Found source: J1304-2106 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 7.392e+09 3.2e+07 1 3.2e+07 ! 02 2 7.424e+09 3.2e+07 1 3.2e+07 ! 03 3 7.456e+09 3.2e+07 1 3.2e+07 ! 04 4 7.552e+09 3.2e+07 1 3.2e+07 ! 05 5 7.744e+09 3.2e+07 1 3.2e+07 ! 06 6 7.776e+09 3.2e+07 1 3.2e+07 ! 07 7 7.808e+09 3.2e+07 1 3.2e+07 ! 08 8 7.84e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 94 lines of history. ! ! Reading 13120 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 8 channels. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_02.dfm J1304-2106_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 60 float amp_soltime2 amp_soltime2 = 5 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.1 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_02.dvm version of 2017.12.26 === " ! === Difmap script: pima_mupet_02.dvm version of 2017.12.26 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.081504 Jy startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.003469Jy sigma=22.115703 ! Fit after self-cal, rms=0.933023Jy sigma=20.453779 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. peakwin win_mult ! Inverting map and beam ! Estimated beam: bmin=0.7163 mas, bmaj=2.045 mas, bpa=-8.466 degrees ! Estimated noise=0.657031 mJy/beam. ! Added new window around map position (0, 0). flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0528475 Jy ! Component: 100 - total flux cleaned = 0.0700496 Jy ! Total flux subtracted in 100 components = 0.0700496 Jy ! Clean residual min=-0.005472 max=0.012827 Jy/beam ! Clean residual mean=0.000010 rms=0.001523 Jy/beam ! Combined flux in latest and established models = 0.0700496 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.0700496 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.041853Jy sigma=0.875754 ! Fit after self-cal, rms=0.041810Jy sigma=0.874883 ! Inverting map ! Added new window around map position (1, 0.2). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0141103 Jy ! Component: 100 - total flux cleaned = 0.0205995 Jy ! Total flux subtracted in 100 components = 0.0205995 Jy ! Clean residual min=-0.003645 max=0.004698 Jy/beam ! Clean residual mean=0.000001 rms=0.000916 Jy/beam ! Combined flux in latest and established models = 0.0906492 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 18 components and 0.0906492 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.037298Jy sigma=0.755900 ! Fit after self-cal, rms=0.037146Jy sigma=0.753179 ! Inverting map print "============== Finished uniform weighting CLEAN ==============" ! ============== Finished uniform weighting CLEAN ============== ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.02 mas, bmaj=2.561 mas, bpa=-8.131 degrees ! Estimated noise=0.280123 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00597046 Jy ! Component: 100 - total flux cleaned = 0.0078539 Jy ! Component: 150 - total flux cleaned = 0.00812061 Jy ! Component: 200 - total flux cleaned = 0.00823356 Jy ! Total flux subtracted in 200 components = 0.00823356 Jy ! Clean residual min=-0.003640 max=0.006557 Jy/beam ! Clean residual mean=-0.000004 rms=0.001322 Jy/beam ! Combined flux in latest and established models = 0.0988828 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 35 components and 0.0988828 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.036514Jy sigma=0.737261 ! Fit after self-cal, rms=0.036463Jy sigma=0.736390 ! Inverting map print "============== Finished natural weighting CLEAN ==============" ! ============== Finished natural weighting CLEAN ============== ! gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.997058 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.02 HN 1.06 KP 0.96 ! LA 0.99 MK 1.02 NL 1.01 OV 1.04 ! PT 1.00 SC 0.94 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.999821 ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.03 HN 1.12 KP 0.94 ! LA 0.98 MK 0.97 NL 1.03 OV 1.05 ! PT 1.00 SC 0.96 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.0059 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.01 HN 1.07 KP 0.96 ! LA 0.99 MK 0.94 NL 1.04 OV 1.00 ! PT 1.03 SC 0.92 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.01585 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.01 HN 1.00 KP 0.98 ! LA 0.97 MK 0.96 NL 1.02 OV 1.03 ! PT 1.00 SC 0.91 ! ! ! Correcting IF 5. ! Amplitude normalization factor in sub-array 1: 0.991931 ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.02 HN 1.18 KP 0.95 ! LA 1.00 MK 1.04 NL 1.04 OV 1.02 ! PT 1.00 SC 0.88 ! ! ! Correcting IF 6. ! Amplitude normalization factor in sub-array 1: 0.998892 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.04 HN 1.10 KP 0.97 ! LA 1.00 MK 1.03 NL 0.98 OV 1.00 ! PT 1.00 SC 0.91 ! ! ! Correcting IF 7. ! Amplitude normalization factor in sub-array 1: 1.00331 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.08 HN 1.07 KP 0.95 ! LA 0.97 MK 1.03 NL 1.00 OV 0.96 ! PT 1.01 SC 0.90 ! ! ! Correcting IF 8. ! Amplitude normalization factor in sub-array 1: 0.995852 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.01 HN 1.11 KP 0.94 ! LA 1.00 MK 0.99 NL 1.03 OV 1.03 ! PT 1.01 SC 0.97 ! ! ! Fit before self-cal, rms=0.036463Jy sigma=0.736390 ! Fit after self-cal, rms=0.036656Jy sigma=0.731686 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.036656Jy sigma=0.731686 ! Fit after self-cal, rms=0.036659Jy sigma=0.731673 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.005 mas, bmaj=2.48 mas, bpa=-6.328 degrees ! Estimated noise=0.276659 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (17.8, 2.6). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00708086 Jy ! Component: 100 - total flux cleaned = 0.0100428 Jy ! Component: 150 - total flux cleaned = 0.0116785 Jy ! Component: 200 - total flux cleaned = 0.0121512 Jy ! Total flux subtracted in 200 components = 0.0121512 Jy ! Clean residual min=-0.002430 max=0.004490 Jy/beam ! Clean residual mean=-0.000007 rms=0.000860 Jy/beam ! Combined flux in latest and established models = 0.111034 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 46 model components to the UV plane model. ! The established model now contains 81 components and 0.111034 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.035903Jy sigma=0.708453 ! Fit after self-cal, rms=0.035847Jy sigma=0.707105 ! Inverting map ! Added new window around map position (4, -1). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00457651 Jy ! Component: 100 - total flux cleaned = 0.00663283 Jy ! Component: 150 - total flux cleaned = 0.00805889 Jy ! Component: 200 - total flux cleaned = 0.00901228 Jy ! Total flux subtracted in 200 components = 0.00901228 Jy ! Clean residual min=-0.002053 max=0.002381 Jy/beam ! Clean residual mean=0.000000 rms=0.000594 Jy/beam ! Combined flux in latest and established models = 0.120046 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 37 model components to the UV plane model. ! The established model now contains 112 components and 0.120046 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.035443Jy sigma=0.696018 ! Fit after self-cal, rms=0.035403Jy sigma=0.695213 ! Inverting map print "============== Finished amplitude gscale SELF-CAL ==============" ! ============== Finished amplitude gscale SELF-CAL ============== ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.035403Jy sigma=0.695213 ! Fit after self-cal, rms=0.035380Jy sigma=0.694678 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0014458 Jy ! Component: 100 - total flux cleaned = 0.00210359 Jy ! Component: 150 - total flux cleaned = 0.00232586 Jy ! Component: 200 - total flux cleaned = 0.00255528 Jy ! Total flux subtracted in 200 components = 0.00255528 Jy ! Clean residual min=-0.001877 max=0.002038 Jy/beam ! Clean residual mean=0.000001 rms=0.000545 Jy/beam ! Combined flux in latest and established models = 0.122602 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 34 model components to the UV plane model. ! The established model now contains 133 components and 0.122602 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.035322Jy sigma=0.693189 ! Fit after self-cal, rms=0.035303Jy sigma=0.692872 ! Inverting map print "=== Finished natural weighting clean with shorter phase_soltime " ! === Finished natural weighting clean with shorter phase_soltime ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.005 x 2.48 at -6.328 degrees (North through East) ! Clean map min=-0.0018394 max=0.065997 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "============== Finished amplitude self-cal ==============" end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7116 mas, bmaj=2.013 mas, bpa=-7.681 degrees ! Estimated noise=0.647058 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0539044 Jy ! Component: 100 - total flux cleaned = 0.0729778 Jy ! Component: 150 - total flux cleaned = 0.083047 Jy ! Component: 200 - total flux cleaned = 0.0894188 Jy ! Total flux subtracted in 200 components = 0.0894188 Jy ! Clean residual min=-0.002716 max=0.003349 Jy/beam ! Clean residual mean=0.000002 rms=0.000751 Jy/beam ! Combined flux in latest and established models = 0.0894188 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 32 model components to the UV plane model. ! The established model now contains 32 components and 0.0894188 Jy ! Inverting map and beam ! Estimated beam: bmin=1.005 mas, bmaj=2.48 mas, bpa=-6.328 degrees ! Estimated noise=0.276659 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00860732 Jy ! Component: 100 - total flux cleaned = 0.0144059 Jy ! Component: 150 - total flux cleaned = 0.0185045 Jy ! Component: 200 - total flux cleaned = 0.0215412 Jy ! Total flux subtracted in 200 components = 0.0215412 Jy ! Clean residual min=-0.002303 max=0.002447 Jy/beam ! Clean residual mean=0.000001 rms=0.000705 Jy/beam ! Combined flux in latest and established models = 0.11096 Jy ! Adding 63 model components to the UV plane model. ! The established model now contains 86 components and 0.11096 Jy ! Inverting map clean ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00234373 Jy ! Component: 100 - total flux cleaned = 0.00419132 Jy ! Component: 150 - total flux cleaned = 0.00567904 Jy ! Component: 200 - total flux cleaned = 0.00690016 Jy ! Total flux subtracted in 200 components = 0.00690016 Jy ! Clean residual min=-0.001859 max=0.001964 Jy/beam ! Clean residual mean=0.000002 rms=0.000573 Jy/beam ! Combined flux in latest and established models = 0.11786 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 55 model components to the UV plane model. ! The established model now contains 124 components and 0.11786 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.035308Jy sigma=0.693221 ! Fit after self-cal, rms=0.035287Jy sigma=0.692956 wmodel J1304-2106_X_map.mod ! Writing 124 model components to file: J1304-2106_X_map.mod wobs J1304-2106_X_uvs.fits ! Writing UV FITS file: J1304-2106_X_uvs.fits wwins J1304-2106_X_map.win ! wwins: Wrote 4 windows to J1304-2106_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000188307 Jy ! Component: 100 - total flux cleaned = 2.90804e-05 Jy ! Component: 150 - total flux cleaned = -8.68761e-05 Jy ! Component: 200 - total flux cleaned = -0.000167427 Jy ! Component: 250 - total flux cleaned = -0.00019234 Jy ! Component: 300 - total flux cleaned = -0.000240488 Jy ! Component: 350 - total flux cleaned = -0.000239582 Jy ! Component: 400 - total flux cleaned = -0.000217996 Jy ! Component: 450 - total flux cleaned = -0.000218357 Jy ! Component: 500 - total flux cleaned = -0.000276975 Jy ! Component: 550 - total flux cleaned = -0.000295675 Jy ! Component: 600 - total flux cleaned = -0.00033176 Jy ! Component: 650 - total flux cleaned = -0.000383485 Jy ! Component: 700 - total flux cleaned = -0.000399634 Jy ! Component: 750 - total flux cleaned = -0.000383823 Jy ! Component: 800 - total flux cleaned = -0.000369108 Jy ! Component: 850 - total flux cleaned = -0.000280537 Jy ! Component: 900 - total flux cleaned = -0.000223571 Jy ! Component: 950 - total flux cleaned = -0.000181838 Jy ! Component: 1000 - total flux cleaned = -0.000114657 Jy ! Component: 1050 - total flux cleaned = -0.000153815 Jy ! Component: 1100 - total flux cleaned = -0.000128381 Jy ! Component: 1150 - total flux cleaned = -0.000128471 Jy ! Component: 1200 - total flux cleaned = -0.000128504 Jy ! Component: 1250 - total flux cleaned = -0.000105454 Jy ! Component: 1300 - total flux cleaned = -0.000139561 Jy ! Component: 1350 - total flux cleaned = -0.000160895 Jy ! Component: 1400 - total flux cleaned = -0.000160309 Jy ! Component: 1450 - total flux cleaned = -7.66399e-05 Jy ! Component: 1500 - total flux cleaned = -6.67111e-05 Jy ! Component: 1550 - total flux cleaned = -2.67328e-05 Jy ! Component: 1600 - total flux cleaned = 1.27133e-05 Jy ! Component: 1650 - total flux cleaned = 5.08195e-05 Jy ! Component: 1700 - total flux cleaned = 7.86756e-05 Jy ! Component: 1750 - total flux cleaned = 0.00010583 Jy ! Component: 1800 - total flux cleaned = 0.000123607 Jy ! Component: 1850 - total flux cleaned = 0.000141199 Jy ! Component: 1900 - total flux cleaned = 0.000158521 Jy ! Component: 1950 - total flux cleaned = 0.000183925 Jy ! Component: 2000 - total flux cleaned = 0.000183731 Jy ! Component: 2050 - total flux cleaned = 0.000167502 Jy ! Component: 2100 - total flux cleaned = 0.000207285 Jy ! Component: 2150 - total flux cleaned = 0.000199354 Jy ! Component: 2200 - total flux cleaned = 0.000214482 Jy ! Component: 2250 - total flux cleaned = 0.000236988 Jy ! Component: 2300 - total flux cleaned = 0.000222065 Jy ! Component: 2350 - total flux cleaned = 0.000229453 Jy ! Component: 2400 - total flux cleaned = 0.000251026 Jy ! Component: 2450 - total flux cleaned = 0.000272379 Jy ! Component: 2500 - total flux cleaned = 0.000314126 Jy ! Component: 2550 - total flux cleaned = 0.000327859 Jy ! Component: 2600 - total flux cleaned = 0.000388721 Jy ! Component: 2650 - total flux cleaned = 0.000368645 Jy ! Component: 2700 - total flux cleaned = 0.000421302 Jy ! Component: 2750 - total flux cleaned = 0.000447109 Jy ! Component: 2800 - total flux cleaned = 0.000434239 Jy ! Component: 2850 - total flux cleaned = 0.000465939 Jy ! Component: 2900 - total flux cleaned = 0.000484758 Jy ! Component: 2950 - total flux cleaned = 0.000509426 Jy ! Component: 3000 - total flux cleaned = 0.000515501 Jy ! Component: 3050 - total flux cleaned = 0.00053366 Jy ! Component: 3100 - total flux cleaned = 0.000545612 Jy ! Component: 3150 - total flux cleaned = 0.0005575 Jy ! Component: 3200 - total flux cleaned = 0.000575037 Jy ! Component: 3250 - total flux cleaned = 0.000598238 Jy ! Component: 3300 - total flux cleaned = 0.000621244 Jy ! Component: 3350 - total flux cleaned = 0.000649751 Jy ! Component: 3400 - total flux cleaned = 0.000666689 Jy ! Component: 3450 - total flux cleaned = 0.000705767 Jy ! Component: 3500 - total flux cleaned = 0.000722348 Jy ! Component: 3550 - total flux cleaned = 0.000733336 Jy ! Component: 3600 - total flux cleaned = 0.000766 Jy ! Component: 3650 - total flux cleaned = 0.000793003 Jy ! Component: 3700 - total flux cleaned = 0.000830423 Jy ! Component: 3750 - total flux cleaned = 0.000846355 Jy ! Component: 3800 - total flux cleaned = 0.000899039 Jy ! Component: 3850 - total flux cleaned = 0.000930302 Jy ! Component: 3900 - total flux cleaned = 0.000987298 Jy ! Component: 3950 - total flux cleaned = 0.00101302 Jy ! Component: 4000 - total flux cleaned = 0.00104884 Jy ! Component: 4050 - total flux cleaned = 0.00109458 Jy ! Total flux subtracted in 4096 components = 0.00114513 Jy ! Clean residual min=-0.000305 max=0.000313 Jy/beam ! Clean residual mean=0.000001 rms=0.000089 Jy/beam ! Combined flux in latest and established models = 0.119005 Jy keep ! Adding 385 model components to the UV plane model. ! The established model now contains 509 components and 0.119005 Jy ![Exited script file: /opt64/bin/pima_mupet_02.dfm] wmap /vlbi/vcs9/uvm//J1304-2106_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.005 x 2.48 at -6.328 degrees (North through East) ! Clean map min=-0.00061851 max=0.06747 Jy/beam ! Writing clean map to FITS file: /vlbi/vcs9/uvm//J1304-2106_X_a_map.fits wmodel /vlbi/vcs9/uvm//J1304-2106_X_a_map.mod ! Writing 509 model components to file: /vlbi/vcs9/uvm//J1304-2106_X_a_map.mod wobs /vlbi/vcs9/uvm//J1304-2106_X_a_uvs.fits ! Writing UV FITS file: /vlbi/vcs9/uvm//J1304-2106_X_a_uvs.fits wwins /vlbi/vcs9/uvm//J1304-2106_X_a_map.win ! wwins: Wrote 5 windows to /vlbi/vcs9/uvm//J1304-2106_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0674702 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 8.12478e-05 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.361261 0.361261 0.722521 1.44504 2.89008 5.78017 11.5603 23.1207 46.2414 92.4827 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0002 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.067 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 830.425 quit ! Quitting program ! Log file /vlbi/vcs9/uvm//J1304-2106_X_a_dfm.log closed on Tue Dec 26 22:27:41 2017