! Started logfile: /vlbi/vcs9/uvm//J1302+5748_C_a_dfm.log on Tue Dec 26 22:26:56 2017 float field_size field_size = 1024 float field_cell field_cell = 0.3000 float taper_size taper_size = 40.0 float freq freq = 4.12800 obs /vlbi/vcs9/uvm//J1302+5748_C_a_uvm.fits ! Reading UV FITS file: /vlbi/vcs9/uvm//J1302+5748_C_a_uvm.fits ! AN table 1: 19 integrations on 28 of 28 possible baselines. ! AN table 2: 110 integrations on 45 of 45 possible baselines. ! AN table 3: 25 integrations on 36 of 36 possible baselines. ! AN table 4: 26 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.642475 visibilities/baseline/integration-bin. ! Found source: J1302+5748 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 4.128e+09 3.2e+07 1 3.2e+07 ! 02 2 4.16e+09 3.2e+07 1 3.2e+07 ! 03 3 4.192e+09 3.2e+07 1 3.2e+07 ! 04 4 4.224e+09 3.2e+07 1 3.2e+07 ! 05 5 4.416e+09 3.2e+07 1 3.2e+07 ! 06 6 4.512e+09 3.2e+07 1 3.2e+07 ! 07 7 4.544e+09 3.2e+07 1 3.2e+07 ! 08 8 4.576e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 85 lines of history. ! ! Reading 36544 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 8 channels. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.3 print "taper_size =", taper_size ! taper_size = 40 ![@/opt64/bin/pima_mupet_02.dfm J1302+5748_C] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 60 float amp_soltime2 amp_soltime2 = 5 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.1 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_02.dvm version of 2017.12.26 === " ! === Difmap script: pima_mupet_02.dvm version of 2017.12.26 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.515712 Jy startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 413 telescope corrections were flagged in sub-array 2. ! A total of 35 telescope corrections were flagged in sub-array 3. ! A total of 22 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 413 telescope corrections were flagged in sub-array 2. ! A total of 35 telescope corrections were flagged in sub-array 3. ! A total of 22 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 413 telescope corrections were flagged in sub-array 2. ! A total of 35 telescope corrections were flagged in sub-array 3. ! A total of 22 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 413 telescope corrections were flagged in sub-array 2. ! A total of 35 telescope corrections were flagged in sub-array 3. ! A total of 22 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 5. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 413 telescope corrections were flagged in sub-array 2. ! A total of 35 telescope corrections were flagged in sub-array 3. ! A total of 22 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 6. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 413 telescope corrections were flagged in sub-array 2. ! A total of 35 telescope corrections were flagged in sub-array 3. ! A total of 22 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 7. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 413 telescope corrections were flagged in sub-array 2. ! A total of 35 telescope corrections were flagged in sub-array 3. ! A total of 22 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 8. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 413 telescope corrections were flagged in sub-array 2. ! A total of 35 telescope corrections were flagged in sub-array 3. ! A total of 22 telescope corrections were flagged in sub-array 4. ! ! Fit before self-cal, rms=1.111571Jy sigma=33.657588 ! Fit after self-cal, rms=0.492764Jy sigma=15.066802 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. peakwin win_mult ! Inverting map and beam ! Estimated beam: bmin=1.453 mas, bmaj=2.84 mas, bpa=11.8 degrees ! Estimated noise=0.231431 mJy/beam. ! Added new window around map position (0, 0). flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.443657 Jy ! Component: 100 - total flux cleaned = 0.494779 Jy ! Total flux subtracted in 100 components = 0.494779 Jy ! Clean residual min=-0.013334 max=0.013522 Jy/beam ! Clean residual mean=-0.000006 rms=0.001554 Jy/beam ! Combined flux in latest and established models = 0.494779 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.494779 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.066307Jy sigma=1.718295 ! Fit after self-cal, rms=0.066305Jy sigma=1.718223 ! Inverting map ! Added new window around map position (1.8, 4.8). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000352756 Jy ! Component: 100 - total flux cleaned = 0.000876415 Jy ! Total flux subtracted in 100 components = 0.000876415 Jy ! Clean residual min=-0.007126 max=0.007675 Jy/beam ! Clean residual mean=-0.000006 rms=0.001326 Jy/beam ! Combined flux in latest and established models = 0.495655 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.495655 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.062486Jy sigma=1.623180 ! Fit after self-cal, rms=0.062444Jy sigma=1.621910 ! Inverting map print "============== Finished uniform weighting CLEAN ==============" ! ============== Finished uniform weighting CLEAN ============== ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.942 mas, bmaj=3.753 mas, bpa=14.92 degrees ! Estimated noise=0.12222 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0113416 Jy ! Component: 100 - total flux cleaned = 0.0158885 Jy ! Component: 150 - total flux cleaned = 0.0165831 Jy ! Component: 200 - total flux cleaned = 0.017187 Jy ! Total flux subtracted in 200 components = 0.017187 Jy ! Clean residual min=-0.004919 max=0.006744 Jy/beam ! Clean residual mean=-0.000002 rms=0.001342 Jy/beam ! Combined flux in latest and established models = 0.512842 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 28 components and 0.512842 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.060493Jy sigma=1.565072 ! Fit after self-cal, rms=0.060460Jy sigma=1.564068 ! Inverting map print "============== Finished natural weighting CLEAN ==============" ! ============== Finished natural weighting CLEAN ============== ! gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.940217 ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.07 HN 1.06 KP 1.07 ! LA 1.06 NL 1.06 OV 1.06 PT 1.06 ! ! A total of 15 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 1.01303 ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 1.03 HN 0.98 KP 0.99 ! LA 0.97 MK 0.98 NL 1.00 OV 0.97 ! PT 0.97 SC 0.95 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Amplitude normalization factor in sub-array 3: 0.988184 ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 1.03 HN 1.03 KP 1.00 ! MK 1.00 NL 1.02 OV 1.02 PT 1.02 ! SC 1.00 ! ! Amplitude normalization factor in sub-array 4: 1.00851 ! Telescope amplitude corrections in sub-array 4: ! BR 0.95 FD 1.00 KP 0.97 LA 0.98 ! NL 1.01 OV 0.98 PT 0.98 SC 1.05 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.933665 ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.08 HN 1.05 KP 1.07 ! LA 1.06 NL 1.06 OV 1.11 PT 1.07 ! ! A total of 15 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 1.01373 ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 FD 1.02 HN 0.98 KP 0.99 ! LA 0.97 MK 0.97 NL 1.00 OV 0.97 ! PT 0.97 SC 0.96 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Amplitude normalization factor in sub-array 3: 0.990682 ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 1.02 HN 1.02 KP 1.01 ! MK 0.99 NL 1.02 OV 1.00 PT 1.02 ! SC 1.01 ! ! Amplitude normalization factor in sub-array 4: 1.01155 ! Telescope amplitude corrections in sub-array 4: ! BR 0.97 FD 0.99 KP 0.98 LA 0.98 ! NL 1.00 OV 0.98 PT 0.98 SC 1.03 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.927557 ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.07 HN 1.06 KP 1.07 ! LA 1.07 NL 1.05 OV 1.18 PT 1.07 ! ! A total of 15 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 1.01323 ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 1.02 HN 0.97 KP 0.99 ! LA 0.98 MK 0.98 NL 0.99 OV 0.97 ! PT 0.98 SC 0.96 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Amplitude normalization factor in sub-array 3: 0.991091 ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 1.00 HN 1.02 KP 1.00 ! MK 1.03 NL 1.00 OV 1.02 PT 1.02 ! SC 1.00 ! ! Amplitude normalization factor in sub-array 4: 1.01759 ! Telescope amplitude corrections in sub-array 4: ! BR 0.95 FD 0.97 KP 0.97 LA 0.97 ! NL 1.01 OV 0.98 PT 0.98 SC 1.02 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.916512 ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.07 HN 1.04 KP 1.07 ! LA 0.97 NL 1.07 OV 1.34 PT 1.10 ! ! A total of 15 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 1.02539 ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 FD 1.01 HN 0.95 KP 0.99 ! LA 0.95 MK 0.98 NL 0.99 OV 0.97 ! PT 0.93 SC 0.96 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Amplitude normalization factor in sub-array 3: 0.991898 ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 1.01 HN 1.03 KP 1.00 ! MK 0.99 NL 1.01 OV 1.01 PT 1.02 ! SC 1.02 ! ! Amplitude normalization factor in sub-array 4: 1.00819 ! Telescope amplitude corrections in sub-array 4: ! BR 0.96 FD 0.97 KP 0.97 LA 1.00 ! NL 1.01 OV 0.98 PT 0.98 SC 1.05 ! ! ! Correcting IF 5. ! Amplitude normalization factor in sub-array 1: 0.914895 ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.09 HN 1.09 KP 1.08 ! LA 1.07 NL 1.07 OV 1.18 PT 1.08 ! ! A total of 15 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 1.00558 ! Telescope amplitude corrections in sub-array 2: ! BR 1.06 FD 1.01 HN 0.99 KP 0.99 ! LA 0.98 MK 0.99 NL 1.00 OV 0.98 ! PT 0.99 SC 0.96 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Amplitude normalization factor in sub-array 3: 1.0049 ! Telescope amplitude corrections in sub-array 3: ! BR 0.96 FD 0.99 HN 1.01 KP 1.00 ! MK 0.98 NL 1.01 OV 1.00 PT 1.01 ! SC 0.99 ! ! Amplitude normalization factor in sub-array 4: 1.00976 ! Telescope amplitude corrections in sub-array 4: ! BR 0.97 FD 0.98 KP 0.97 LA 0.98 ! NL 1.02 OV 0.98 PT 0.98 SC 1.04 ! ! ! Correcting IF 6. ! Amplitude normalization factor in sub-array 1: 0.9132 ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.10 HN 1.07 KP 1.08 ! LA 1.07 NL 1.09 OV 1.18 PT 1.07 ! ! A total of 15 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 1.00706 ! Telescope amplitude corrections in sub-array 2: ! BR 1.05 FD 1.00 HN 0.99 KP 1.00 ! LA 0.98 MK 0.98 NL 1.00 OV 0.98 ! PT 0.99 SC 0.96 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Amplitude normalization factor in sub-array 3: 1.00486 ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 0.99 HN 1.01 KP 1.00 ! MK 0.98 NL 1.01 OV 1.00 PT 1.01 ! SC 0.98 ! ! Amplitude normalization factor in sub-array 4: 1.01047 ! Telescope amplitude corrections in sub-array 4: ! BR 0.95 FD 0.98 KP 0.97 LA 0.98 ! NL 1.02 OV 0.99 PT 0.99 SC 1.03 ! ! ! Correcting IF 7. ! Amplitude normalization factor in sub-array 1: 0.917342 ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.08 HN 1.08 KP 1.09 ! LA 1.03 NL 1.08 OV 1.19 PT 1.08 ! ! A total of 15 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 1.00666 ! Telescope amplitude corrections in sub-array 2: ! BR 1.05 FD 1.00 HN 0.99 KP 1.00 ! LA 0.98 MK 0.99 NL 1.00 OV 0.97 ! PT 0.99 SC 0.97 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Amplitude normalization factor in sub-array 3: 1.00461 ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 0.99 HN 1.02 KP 0.99 ! MK 0.98 NL 1.01 OV 1.01 PT 1.00 ! SC 0.98 ! ! Amplitude normalization factor in sub-array 4: 1.01007 ! Telescope amplitude corrections in sub-array 4: ! BR 0.96 FD 0.97 KP 0.97 LA 0.98 ! NL 1.02 OV 0.99 PT 0.99 SC 1.03 ! ! ! Correcting IF 8. ! Amplitude normalization factor in sub-array 1: 0.909672 ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.10 HN 1.09 KP 1.09 ! LA 1.08 NL 1.09 OV 1.19 PT 1.08 ! ! A total of 15 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 1.00515 ! Telescope amplitude corrections in sub-array 2: ! BR 1.06 FD 1.00 HN 1.00 KP 0.99 ! LA 0.99 MK 0.99 NL 1.00 OV 0.98 ! PT 0.99 SC 0.96 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Amplitude normalization factor in sub-array 3: 1.00636 ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 0.99 HN 1.02 KP 0.99 ! MK 0.98 NL 1.00 OV 1.00 PT 1.00 ! SC 0.98 ! ! Amplitude normalization factor in sub-array 4: 1.01004 ! Telescope amplitude corrections in sub-array 4: ! BR 0.96 FD 0.98 KP 0.97 LA 0.98 ! NL 1.02 OV 0.99 PT 0.99 SC 1.03 ! ! ! Fit before self-cal, rms=0.060460Jy sigma=1.564068 ! Fit after self-cal, rms=0.057304Jy sigma=1.508895 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.057304Jy sigma=1.508895 ! Fit after self-cal, rms=0.057303Jy sigma=1.508895 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.934 mas, bmaj=3.748 mas, bpa=14.83 degrees ! Estimated noise=0.122119 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000610355 Jy ! Component: 100 - total flux cleaned = 0.000615171 Jy ! Component: 150 - total flux cleaned = 0.000692216 Jy ! Component: 200 - total flux cleaned = 0.000692187 Jy ! Total flux subtracted in 200 components = 0.000692187 Jy ! Clean residual min=-0.005452 max=0.005892 Jy/beam ! Clean residual mean=-0.000002 rms=0.001226 Jy/beam ! Combined flux in latest and established models = 0.513534 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 38 components and 0.513534 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.056966Jy sigma=1.502881 ! Fit after self-cal, rms=0.056965Jy sigma=1.502828 ! Inverting map print "============== Finished amplitude gscale SELF-CAL ==============" ! ============== Finished amplitude gscale SELF-CAL ============== ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.056965Jy sigma=1.502828 ! Fit after self-cal, rms=0.056960Jy sigma=1.502690 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (17.7, -47.7). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00714973 Jy ! Component: 100 - total flux cleaned = 0.00898311 Jy ! Component: 150 - total flux cleaned = 0.00961153 Jy ! Component: 200 - total flux cleaned = 0.00986278 Jy ! Total flux subtracted in 200 components = 0.00986278 Jy ! Clean residual min=-0.005073 max=0.005197 Jy/beam ! Clean residual mean=-0.000005 rms=0.001117 Jy/beam ! Combined flux in latest and established models = 0.523397 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 62 components and 0.523397 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.056064Jy sigma=1.478777 ! Fit after self-cal, rms=0.055998Jy sigma=1.475779 ! Inverting map print "=== Finished natural weighting clean with shorter phase_soltime " ! === Finished natural weighting clean with shorter phase_soltime ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.934 x 3.748 at 14.83 degrees (North through East) ! Clean map min=-0.0050052 max=0.50503 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "============== Finished amplitude self-cal ==============" end if ! Performing amp+phase self-cal over 60 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.055998Jy sigma=1.475779 ! Fit after self-cal, rms=0.030234Jy sigma=0.755619 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.030234Jy sigma=0.755619 ! Fit after self-cal, rms=0.030233Jy sigma=0.755591 ! Inverting map and beam ! Estimated beam: bmin=1.919 mas, bmaj=3.741 mas, bpa=13.96 degrees ! Estimated noise=0.121906 mJy/beam. ! Added new window around map position (-1.8, -0.6). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000674565 Jy ! Component: 100 - total flux cleaned = -0.000159895 Jy ! Component: 150 - total flux cleaned = -0.000642082 Jy ! Component: 200 - total flux cleaned = -0.000960777 Jy ! Total flux subtracted in 200 components = -0.000960777 Jy ! Clean residual min=-0.001147 max=0.001404 Jy/beam ! Clean residual mean=-0.000002 rms=0.000297 Jy/beam ! Combined flux in latest and established models = 0.522436 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 83 components and 0.522436 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.029486Jy sigma=0.732865 ! Fit after self-cal, rms=0.029473Jy sigma=0.732373 ! Inverting map ! Added new window around map position (0, 5.4). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 2.82465e-05 Jy ! Component: 100 - total flux cleaned = -0.000111257 Jy ! Component: 150 - total flux cleaned = -0.00035492 Jy ! Component: 200 - total flux cleaned = -0.000573227 Jy ! Total flux subtracted in 200 components = -0.000573227 Jy ! Clean residual min=-0.001044 max=0.001317 Jy/beam ! Clean residual mean=-0.000001 rms=0.000275 Jy/beam ! Combined flux in latest and established models = 0.521863 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 35 model components to the UV plane model. ! The established model now contains 106 components and 0.521863 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.029227Jy sigma=0.725063 ! Fit after self-cal, rms=0.029220Jy sigma=0.724859 ! Inverting map ! Added new window around map position (12.3, 26.1). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000528007 Jy ! Component: 100 - total flux cleaned = 0.000279596 Jy ! Component: 150 - total flux cleaned = 4.90569e-05 Jy ! Component: 200 - total flux cleaned = -0.000166452 Jy ! Total flux subtracted in 200 components = -0.000166452 Jy ! Clean residual min=-0.000998 max=0.001244 Jy/beam ! Clean residual mean=-0.000001 rms=0.000264 Jy/beam ! Combined flux in latest and established models = 0.521696 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 40 model components to the UV plane model. ! The established model now contains 124 components and 0.521697 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.029075Jy sigma=0.720574 ! Fit after self-cal, rms=0.029072Jy sigma=0.720456 ! Inverting map ! Added new window around map position (22.8, 31.8). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000490535 Jy ! Component: 100 - total flux cleaned = 0.000323545 Jy ! Component: 150 - total flux cleaned = 0.000166276 Jy ! Component: 200 - total flux cleaned = -2.02151e-05 Jy ! Total flux subtracted in 200 components = -2.02151e-05 Jy ! Clean residual min=-0.000961 max=0.001250 Jy/beam ! Clean residual mean=-0.000001 rms=0.000256 Jy/beam ! Combined flux in latest and established models = 0.521676 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 50 model components to the UV plane model. ! The established model now contains 145 components and 0.521676 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.028965Jy sigma=0.717234 ! Fit after self-cal, rms=0.028963Jy sigma=0.717163 ! Inverting map ! Added new window around map position (-10.2, 13.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000932977 Jy ! Component: 100 - total flux cleaned = 0.00105396 Jy ! Component: 150 - total flux cleaned = 0.000983616 Jy ! Component: 200 - total flux cleaned = 0.000984092 Jy ! Total flux subtracted in 200 components = 0.000984092 Jy ! Clean residual min=-0.000991 max=0.001074 Jy/beam ! Clean residual mean=-0.000001 rms=0.000246 Jy/beam ! Combined flux in latest and established models = 0.52266 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 52 model components to the UV plane model. ! The established model now contains 167 components and 0.52266 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.028864Jy sigma=0.714231 ! Fit after self-cal, rms=0.028862Jy sigma=0.714151 ! Inverting map ! ============== Finished amplitude self-cal ============== print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.437 mas, bmaj=2.818 mas, bpa=11.05 degrees ! Estimated noise=0.235288 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.442742 Jy ! Component: 100 - total flux cleaned = 0.500356 Jy ! Component: 150 - total flux cleaned = 0.505559 Jy ! Component: 200 - total flux cleaned = 0.506198 Jy ! Total flux subtracted in 200 components = 0.506198 Jy ! Clean residual min=-0.003713 max=0.004506 Jy/beam ! Clean residual mean=-0.000002 rms=0.000531 Jy/beam ! Combined flux in latest and established models = 0.506198 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.506198 Jy ! Inverting map and beam ! Estimated beam: bmin=1.919 mas, bmaj=3.741 mas, bpa=13.96 degrees ! Estimated noise=0.121906 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0064969 Jy ! Component: 100 - total flux cleaned = 0.00921427 Jy ! Component: 150 - total flux cleaned = 0.0103291 Jy ! Component: 200 - total flux cleaned = 0.0111811 Jy ! Total flux subtracted in 200 components = 0.0111811 Jy ! Clean residual min=-0.001759 max=0.002596 Jy/beam ! Clean residual mean=-0.000000 rms=0.000327 Jy/beam ! Combined flux in latest and established models = 0.517379 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 53 components and 0.517379 Jy ! Inverting map ! Added new window around map position (1.8, -4.2). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00113443 Jy ! Component: 100 - total flux cleaned = 0.00174706 Jy ! Component: 150 - total flux cleaned = 0.00242783 Jy ! Component: 200 - total flux cleaned = 0.002831 Jy ! Total flux subtracted in 200 components = 0.002831 Jy ! Clean residual min=-0.001142 max=0.001473 Jy/beam ! Clean residual mean=0.000000 rms=0.000282 Jy/beam ! Combined flux in latest and established models = 0.52021 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 72 components and 0.52021 Jy ! Inverting map ! Added new window around map position (23.7, -43.2). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00102666 Jy ! Component: 100 - total flux cleaned = 0.00143415 Jy ! Component: 150 - total flux cleaned = 0.00176278 Jy ! Component: 200 - total flux cleaned = 0.0019665 Jy ! Total flux subtracted in 200 components = 0.0019665 Jy ! Clean residual min=-0.001097 max=0.001197 Jy/beam ! Clean residual mean=-0.000000 rms=0.000259 Jy/beam ! Combined flux in latest and established models = 0.522177 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 103 components and 0.522177 Jy ! Inverting map ! Added new window around map position (-4.2, 20.4). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000602834 Jy ! Component: 100 - total flux cleaned = 0.0005584 Jy ! Component: 150 - total flux cleaned = 0.000604402 Jy ! Component: 200 - total flux cleaned = 0.000647973 Jy ! Total flux subtracted in 200 components = 0.000647973 Jy ! Clean residual min=-0.001022 max=0.001136 Jy/beam ! Clean residual mean=-0.000000 rms=0.000246 Jy/beam ! Combined flux in latest and established models = 0.522824 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 128 components and 0.522824 Jy ! Inverting map ! Added new window around map position (-12.9, -26.1). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000531269 Jy ! Component: 100 - total flux cleaned = 0.000529936 Jy ! Component: 150 - total flux cleaned = 0.000413552 Jy ! Component: 200 - total flux cleaned = 0.000413625 Jy ! Total flux subtracted in 200 components = 0.000413625 Jy ! Clean residual min=-0.000978 max=0.001031 Jy/beam ! Clean residual mean=-0.000000 rms=0.000238 Jy/beam ! Combined flux in latest and established models = 0.523238 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 149 components and 0.523238 Jy ! Inverting map ! Added new window around map position (-23.7, 43.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000578207 Jy ! Component: 100 - total flux cleaned = 0.00057893 Jy ! Component: 150 - total flux cleaned = 0.000613365 Jy ! Component: 200 - total flux cleaned = 0.000579741 Jy ! Total flux subtracted in 200 components = 0.000579741 Jy ! Clean residual min=-0.000962 max=0.000990 Jy/beam ! Clean residual mean=-0.000001 rms=0.000230 Jy/beam ! Combined flux in latest and established models = 0.523817 Jy ! Adding 62 model components to the UV plane model. ! The established model now contains 170 components and 0.523817 Jy ! Inverting map ! Added new window around map position (12.6, 40.8). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000561796 Jy ! Component: 100 - total flux cleaned = 0.000842225 Jy ! Component: 150 - total flux cleaned = 0.0009739 Jy ! Component: 200 - total flux cleaned = 0.00100591 Jy ! Total flux subtracted in 200 components = 0.00100591 Jy ! Clean residual min=-0.000918 max=0.000882 Jy/beam ! Clean residual mean=-0.000001 rms=0.000221 Jy/beam ! Combined flux in latest and established models = 0.524823 Jy ! Adding 59 model components to the UV plane model. ! The established model now contains 194 components and 0.524824 Jy ! Inverting map clean ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 9.33494e-05 Jy ! Component: 100 - total flux cleaned = 6.36228e-05 Jy ! Component: 150 - total flux cleaned = 0.000151608 Jy ! Component: 200 - total flux cleaned = 0.000122964 Jy ! Total flux subtracted in 200 components = 0.000122964 Jy ! Clean residual min=-0.000903 max=0.000867 Jy/beam ! Clean residual mean=-0.000001 rms=0.000217 Jy/beam ! Combined flux in latest and established models = 0.524947 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 79 model components to the UV plane model. ! The established model now contains 214 components and 0.524947 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.028720Jy sigma=0.708618 ! Fit after self-cal, rms=0.028705Jy sigma=0.708141 wmodel J1302+5748_C_map.mod ! Writing 214 model components to file: J1302+5748_C_map.mod wobs J1302+5748_C_uvs.fits ! Writing UV FITS file: J1302+5748_C_uvs.fits wwins J1302+5748_C_map.win ! wwins: Wrote 14 windows to J1302+5748_C_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00015311 Jy ! Component: 100 - total flux cleaned = -0.000184241 Jy ! Component: 150 - total flux cleaned = -0.000199745 Jy ! Component: 200 - total flux cleaned = -0.00017105 Jy ! Component: 250 - total flux cleaned = -0.00015724 Jy ! Component: 300 - total flux cleaned = -0.000171165 Jy ! Component: 350 - total flux cleaned = -0.00017119 Jy ! Component: 400 - total flux cleaned = -0.000171163 Jy ! Component: 450 - total flux cleaned = -0.00013182 Jy ! Component: 500 - total flux cleaned = -0.000157894 Jy ! Component: 550 - total flux cleaned = -0.000144822 Jy ! Component: 600 - total flux cleaned = -0.000119517 Jy ! Component: 650 - total flux cleaned = -9.44002e-05 Jy ! Component: 700 - total flux cleaned = -5.73678e-05 Jy ! Component: 750 - total flux cleaned = -4.51283e-05 Jy ! Component: 800 - total flux cleaned = 2.72005e-05 Jy ! Component: 850 - total flux cleaned = -2.06236e-05 Jy ! Component: 900 - total flux cleaned = 1.48654e-05 Jy ! Component: 950 - total flux cleaned = -3.19623e-05 Jy ! Component: 1000 - total flux cleaned = -5.49233e-05 Jy ! Component: 1050 - total flux cleaned = -5.47274e-05 Jy ! Component: 1100 - total flux cleaned = -5.45965e-05 Jy ! Component: 1150 - total flux cleaned = -9.42544e-06 Jy ! Component: 1200 - total flux cleaned = -2.0701e-05 Jy ! Component: 1250 - total flux cleaned = -4.30027e-05 Jy ! Component: 1300 - total flux cleaned = -4.30372e-05 Jy ! Component: 1350 - total flux cleaned = -6.49888e-05 Jy ! Component: 1400 - total flux cleaned = -4.31527e-05 Jy ! Component: 1450 - total flux cleaned = -8.65811e-05 Jy ! Component: 1500 - total flux cleaned = -0.000118609 Jy ! Component: 1550 - total flux cleaned = -9.72281e-05 Jy ! Component: 1600 - total flux cleaned = -8.66386e-05 Jy ! Component: 1650 - total flux cleaned = -0.000118225 Jy ! Component: 1700 - total flux cleaned = -0.000128716 Jy ! Component: 1750 - total flux cleaned = -0.00013899 Jy ! Component: 1800 - total flux cleaned = -0.000180198 Jy ! Component: 1850 - total flux cleaned = -0.000180158 Jy ! Component: 1900 - total flux cleaned = -0.000230969 Jy ! Component: 1950 - total flux cleaned = -0.000220867 Jy ! Component: 2000 - total flux cleaned = -0.000281176 Jy ! Component: 2050 - total flux cleaned = -0.000281124 Jy ! Component: 2100 - total flux cleaned = -0.000310985 Jy ! Component: 2150 - total flux cleaned = -0.00032081 Jy ! Component: 2200 - total flux cleaned = -0.000350222 Jy ! Component: 2250 - total flux cleaned = -0.000389151 Jy ! Component: 2300 - total flux cleaned = -0.000379558 Jy ! Component: 2350 - total flux cleaned = -0.000427768 Jy ! Component: 2400 - total flux cleaned = -0.000437289 Jy ! Component: 2450 - total flux cleaned = -0.000408621 Jy ! Component: 2500 - total flux cleaned = -0.000455985 Jy ! Component: 2550 - total flux cleaned = -0.000456103 Jy ! Component: 2600 - total flux cleaned = -0.000456064 Jy ! Component: 2650 - total flux cleaned = -0.000484056 Jy ! Component: 2700 - total flux cleaned = -0.000511788 Jy ! Component: 2750 - total flux cleaned = -0.000484136 Jy ! Component: 2800 - total flux cleaned = -0.000493361 Jy ! Component: 2850 - total flux cleaned = -0.000475125 Jy ! Component: 2900 - total flux cleaned = -0.000484277 Jy ! Component: 2950 - total flux cleaned = -0.000475343 Jy ! Component: 3000 - total flux cleaned = -0.000484358 Jy ! Component: 3050 - total flux cleaned = -0.000493316 Jy ! Component: 3100 - total flux cleaned = -0.000519992 Jy ! Component: 3150 - total flux cleaned = -0.000520045 Jy ! Component: 3200 - total flux cleaned = -0.000511211 Jy ! Component: 3250 - total flux cleaned = -0.000519995 Jy ! Component: 3300 - total flux cleaned = -0.000580989 Jy ! Component: 3350 - total flux cleaned = -0.000511537 Jy ! Component: 3400 - total flux cleaned = -0.000580639 Jy ! Component: 3450 - total flux cleaned = -0.000597797 Jy ! Component: 3500 - total flux cleaned = -0.000572155 Jy ! Component: 3550 - total flux cleaned = -0.000589133 Jy ! Component: 3600 - total flux cleaned = -0.000614551 Jy ! Component: 3650 - total flux cleaned = -0.000623044 Jy ! Component: 3700 - total flux cleaned = -0.000623074 Jy ! Component: 3750 - total flux cleaned = -0.000639824 Jy ! Component: 3800 - total flux cleaned = -0.00067311 Jy ! Component: 3850 - total flux cleaned = -0.000681421 Jy ! Component: 3900 - total flux cleaned = -0.000673248 Jy ! Component: 3950 - total flux cleaned = -0.000665062 Jy ! Component: 4000 - total flux cleaned = -0.000697744 Jy ! Component: 4050 - total flux cleaned = -0.000689602 Jy ! Total flux subtracted in 4096 components = -0.000721989 Jy ! Clean residual min=-0.000431 max=0.000434 Jy/beam ! Clean residual mean=-0.000000 rms=0.000148 Jy/beam ! Combined flux in latest and established models = 0.524225 Jy keep ! Adding 311 model components to the UV plane model. ! The established model now contains 524 components and 0.524224 Jy ![Exited script file: /opt64/bin/pima_mupet_02.dfm] wmap /vlbi/vcs9/uvm//J1302+5748_C_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.919 x 3.741 at 13.96 degrees (North through East) ! Clean map min=-0.00091249 max=0.50546 Jy/beam ! Writing clean map to FITS file: /vlbi/vcs9/uvm//J1302+5748_C_a_map.fits wmodel /vlbi/vcs9/uvm//J1302+5748_C_a_map.mod ! Writing 524 model components to file: /vlbi/vcs9/uvm//J1302+5748_C_a_map.mod wobs /vlbi/vcs9/uvm//J1302+5748_C_a_uvs.fits ! Writing UV FITS file: /vlbi/vcs9/uvm//J1302+5748_C_a_uvs.fits wwins /vlbi/vcs9/uvm//J1302+5748_C_a_map.win ! wwins: Wrote 15 windows to /vlbi/vcs9/uvm//J1302+5748_C_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.50546 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000148211 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.087966 0.087966 0.175932 0.351864 0.703728 1.40746 2.81491 5.62982 11.2596 22.5193 45.0386 90.0772 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.505 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 3410.41 quit ! Quitting program ! Log file /vlbi/vcs9/uvm//J1302+5748_C_a_dfm.log closed on Tue Dec 26 22:27:03 2017