! Started logfile: /vlbi/vcs9/uvm//J1223+5826_X_a_dfm.log on Tue Dec 26 22:23:21 2017
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    7.39200
obs     /vlbi/vcs9/uvm//J1223+5826_X_a_uvm.fits
! Reading UV FITS file: /vlbi/vcs9/uvm//J1223+5826_X_a_uvm.fits
! AN table 1: 58 integrations on 36 of 36 possible baselines.
! AN table 2: 42 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.870833 visibilities/baseline/integration-bin.
! Found source: J1223+5826
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 85 lines of history.
! 
! Reading 25080 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_02.dfm J1223+5826_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 60
float amp_soltime2
amp_soltime2 = 5
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.1
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_02.dvm version of 2017.12.26 === "
! === Difmap script: pima_mupet_02.dvm version of 2017.12.26 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.0372127 Jy 
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 17 telescope corrections were flagged in sub-array 1.
!  A total of 56 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 17 telescope corrections were flagged in sub-array 1.
!  A total of 56 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 17 telescope corrections were flagged in sub-array 1.
!  A total of 56 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 17 telescope corrections were flagged in sub-array 1.
!  A total of 56 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 5.
!  A total of 17 telescope corrections were flagged in sub-array 1.
!  A total of 56 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 6.
!  A total of 17 telescope corrections were flagged in sub-array 1.
!  A total of 56 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 7.
!  A total of 17 telescope corrections were flagged in sub-array 1.
!  A total of 56 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 8.
!  A total of 17 telescope corrections were flagged in sub-array 1.
!  A total of 56 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.000303Jy  sigma=25.138289
! Fit after  self-cal, rms=0.982079Jy  sigma=24.680042
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
peakwin win_mult
! Inverting map and beam 
! Estimated beam: bmin=0.7264 mas, bmaj=1.893 mas, bpa=8.038 degrees
! Estimated noise=0.345635 mJy/beam.
! Added new window around map position (0, 0).
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.015544 Jy
! Component: 100  -  total flux cleaned = 0.0178691 Jy
! Total flux subtracted in 100 components = 0.0178691 Jy
! Clean residual min=-0.001192 max=0.001251 Jy/beam
! Clean residual mean=0.000000 rms=0.000280 Jy/beam
! Combined flux in latest and established models = 0.0178691 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.0178691 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032315Jy  sigma=0.725070
! Fit after  self-cal, rms=0.032285Jy  sigma=0.724027
! Inverting map 
print "============== Finished uniform weighting CLEAN =============="
! ============== Finished uniform weighting CLEAN ============== 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.95 mas, bmaj=2.26 mas, bpa=9.554 degrees
! Estimated noise=0.177689 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00158353 Jy
! Component: 100  -  total flux cleaned = 0.00186184 Jy
! Component: 150  -  total flux cleaned = 0.00189963 Jy
! Component: 200  -  total flux cleaned = 0.00188607 Jy
! Total flux subtracted in 200 components = 0.00188607 Jy
! Clean residual min=-0.000721 max=0.000838 Jy/beam
! Clean residual mean=-0.000002 rms=0.000167 Jy/beam
! Combined flux in latest and established models = 0.0197551 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 11 model components to the UV plane model.
! The established model now contains 17 components and 0.0197551 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032236Jy  sigma=0.722558
! Fit after  self-cal, rms=0.032236Jy  sigma=0.722534
! Inverting map 
print "============== Finished natural weighting CLEAN =============="
! ============== Finished natural weighting CLEAN ============== 
! 
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 0.964853
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.02     HN        1.21     KP        0.89     
!   LA        1.07     MK        1.02     NL        1.07     PT        1.12     
!   SC        0.96     
! 
!  A total of 6 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.88132
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.98     HN        1.31     KP        1.29     LA        0.89     
!   MK        0.89     NL        0.97     OV        1.12     PT        1.79     
!   SC        0.99     
! 
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 0.99455
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        0.99     HN        1.20     KP        0.84     
!   LA        0.97     MK        1.00     NL        1.01     PT        1.17     
!   SC        0.95     
! 
!  A total of 6 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.854732
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.32     HN        1.04     KP        1.33     LA        1.21     
!   MK        1.12     NL        1.23     OV        0.97     PT        1.25     
!   SC        1.06     
! 
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 1.05569
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     FD        1.07     HN        1.10     KP        0.78     
!   LA        0.96     MK        0.83     NL        0.89     PT        0.92     
!   SC        0.86     
! 
!  A total of 6 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.905438
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.04     HN        1.17     KP        0.97     LA        1.23     
!   MK        0.96     NL        1.27     OV        1.04     PT        1.18     
!   SC        1.06     
! 
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 0.985774
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     FD        0.89     HN        1.22     KP        0.87     
!   LA        1.11     MK        1.11     NL        0.98     PT        0.99     
!   SC        0.85     
! 
!  A total of 6 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.875655
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.84     HN        1.26     KP        1.32     LA        0.91     
!   MK        1.07     NL        1.18     OV        1.14     PT        1.48     
!   SC        1.07     
! 
! 
! Correcting IF 5.
!  Amplitude normalization factor in sub-array 1: 1.0392
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.98     HN        0.94     KP        1.03     
!   LA        1.04     MK        0.87     NL        0.85     PT        1.00     
!   SC        0.98     
! 
!  A total of 6 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.940736
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.91     HN        1.04     KP        0.98     LA        1.30     
!   MK        1.07     NL        1.00     OV        1.23     PT        0.88     
!   SC        1.17     
! 
! 
! Correcting IF 6.
!  Amplitude normalization factor in sub-array 1: 1.00236
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.90     HN        1.10     KP        0.79     
!   LA        0.93     MK        1.22     NL        0.95     PT        0.96     
!   SC        1.08     
! 
!  A total of 6 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.878076
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.92     HN        1.10     KP        1.08     LA        0.97     
!   MK        1.17     NL        1.10     OV        1.07     PT        1.49     
!   SC        1.35     
! 
! 
! Correcting IF 7.
!  Amplitude normalization factor in sub-array 1: 1.07827
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.89     FD        0.89     HN        0.99     KP        0.83     
!   LA        0.83     MK        1.06     NL        0.94     PT        0.99     
!   SC        0.95     
! 
!  A total of 6 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 1.02013
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.93     HN        0.92     KP        0.95     LA        1.15     
!   MK        0.94     NL        0.92     OV        0.97     PT        1.13     
!   SC        0.91     
! 
! 
! Correcting IF 8.
!  Amplitude normalization factor in sub-array 1: 0.995869
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.04     HN        0.97     KP        0.98     
!   LA        0.84     MK        1.14     NL        1.09     PT        0.87     
!   SC        1.10     
! 
!  A total of 6 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 1.0208
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.85     HN        0.88     KP        1.08     LA        1.02     
!   MK        0.91     NL        1.16     OV        0.92     PT        1.20     
!   SC        0.78     
! 
! 
! Fit before self-cal, rms=0.032236Jy  sigma=0.722534
! Fit after  self-cal, rms=0.032295Jy  sigma=0.720561
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032295Jy  sigma=0.720561
! Fit after  self-cal, rms=0.032299Jy  sigma=0.720528
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.951 mas, bmaj=2.297 mas, bpa=10.6 degrees
! Estimated noise=0.167686 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000826558 Jy
! Component: 100  -  total flux cleaned = -0.00113315 Jy
! Component: 150  -  total flux cleaned = -0.00117622 Jy
! Component: 200  -  total flux cleaned = -0.00120412 Jy
! Total flux subtracted in 200 components = -0.00120412 Jy
! Clean residual min=-0.000607 max=0.000739 Jy/beam
! Clean residual mean=-0.000001 rms=0.000148 Jy/beam
! Combined flux in latest and established models = 0.018551 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 21 model components to the UV plane model.
! The established model now contains 34 components and 0.018551 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032298Jy  sigma=0.720062
! Fit after  self-cal, rms=0.032297Jy  sigma=0.720053
! Inverting map 
print "============== Finished amplitude gscale SELF-CAL =============="
! ============== Finished amplitude gscale SELF-CAL ============== 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032297Jy  sigma=0.720053
! Fit after  self-cal, rms=0.032254Jy  sigma=0.718417
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (3.8, 46.2).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000790317 Jy
! Component: 100  -  total flux cleaned = 0.000914231 Jy
! Component: 150  -  total flux cleaned = 0.000939249 Jy
! Component: 200  -  total flux cleaned = 0.000973183 Jy
! Total flux subtracted in 200 components = 0.000973183 Jy
! Clean residual min=-0.000588 max=0.000628 Jy/beam
! Clean residual mean=-0.000001 rms=0.000141 Jy/beam
! Combined flux in latest and established models = 0.0195242 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 23 model components to the UV plane model.
! The established model now contains 55 components and 0.0195242 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032239Jy  sigma=0.717883
! Fit after  self-cal, rms=0.032233Jy  sigma=0.717502
! Inverting map 
print "=== Finished natural weighting clean with shorter phase_soltime "
! === Finished natural weighting clean with shorter phase_soltime  
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.951 x 2.297 at 10.6 degrees (North through East)
! Clean map  min=-0.00054522  max=0.017577 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "============== Finished amplitude self-cal =============="
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.725 mas, bmaj=1.912 mas, bpa=8.724 degrees
! Estimated noise=0.331663 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0149933 Jy
! Component: 100  -  total flux cleaned = 0.0171864 Jy
! Component: 150  -  total flux cleaned = 0.0180054 Jy
! Component: 200  -  total flux cleaned = 0.0184051 Jy
! Total flux subtracted in 200 components = 0.0184051 Jy
! Clean residual min=-0.001030 max=0.001083 Jy/beam
! Clean residual mean=0.000000 rms=0.000245 Jy/beam
! Combined flux in latest and established models = 0.0184051 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 0.0184051 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.951 mas, bmaj=2.297 mas, bpa=10.6 degrees
! Estimated noise=0.167686 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1, -0.4).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000935217 Jy
! Component: 100  -  total flux cleaned = 0.00121675 Jy
! Component: 150  -  total flux cleaned = 0.0013768 Jy
! Component: 200  -  total flux cleaned = 0.00145377 Jy
! Total flux subtracted in 200 components = 0.00145377 Jy
! Clean residual min=-0.000582 max=0.000590 Jy/beam
! Clean residual mean=-0.000001 rms=0.000138 Jy/beam
! Combined flux in latest and established models = 0.0198588 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 46 components and 0.0198588 Jy
! Inverting map 
! Added new window around map position (-1.4, 0.2).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000172898 Jy
! Component: 100  -  total flux cleaned = 0.000137734 Jy
! Component: 150  -  total flux cleaned = 0.000137514 Jy
! Component: 200  -  total flux cleaned = 0.000151739 Jy
! Total flux subtracted in 200 components = 0.000151739 Jy
! Clean residual min=-0.000534 max=0.000522 Jy/beam
! Clean residual mean=-0.000001 rms=0.000132 Jy/beam
! Combined flux in latest and established models = 0.0200106 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 69 components and 0.0200106 Jy
! Inverting map 
clean
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 1.31871e-05 Jy
! Component: 100  -  total flux cleaned = 1.33933e-05 Jy
! Component: 150  -  total flux cleaned = 4.6379e-05 Jy
! Component: 200  -  total flux cleaned = 6.7013e-05 Jy
! Total flux subtracted in 200 components = 6.7013e-05 Jy
! Clean residual min=-0.000525 max=0.000518 Jy/beam
! Clean residual mean=-0.000001 rms=0.000129 Jy/beam
! Combined flux in latest and established models = 0.0200776 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 51 model components to the UV plane model.
! The established model now contains 92 components and 0.0200776 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032214Jy  sigma=0.716872
! Fit after  self-cal, rms=0.032214Jy  sigma=0.716788
wmodel J1223+5826_X_map.mod
! Writing 92 model components to file: J1223+5826_X_map.mod
wobs   J1223+5826_X_uvs.fits
! Writing UV FITS file: J1223+5826_X_uvs.fits
wwins  J1223+5826_X_map.win
! wwins: Wrote 4 windows to J1223+5826_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -9.69103e-06 Jy
! Component: 100  -  total flux cleaned = -2.8264e-05 Jy
! Component: 150  -  total flux cleaned = -1.90123e-05 Jy
! Component: 200  -  total flux cleaned = -2.7324e-05 Jy
! Component: 250  -  total flux cleaned = -1.90241e-05 Jy
! Component: 300  -  total flux cleaned = -4.35236e-05 Jy
! Component: 350  -  total flux cleaned = -5.15729e-05 Jy
! Component: 400  -  total flux cleaned = -6.70409e-05 Jy
! Component: 450  -  total flux cleaned = -8.23524e-05 Jy
! Component: 500  -  total flux cleaned = -0.000120029 Jy
! Component: 550  -  total flux cleaned = -0.000164254 Jy
! Component: 600  -  total flux cleaned = -0.000193225 Jy
! Component: 650  -  total flux cleaned = -0.000250119 Jy
! Component: 700  -  total flux cleaned = -0.000271083 Jy
! Component: 750  -  total flux cleaned = -0.000319316 Jy
! Component: 800  -  total flux cleaned = -0.000332915 Jy
! Component: 850  -  total flux cleaned = -0.000373108 Jy
! Component: 900  -  total flux cleaned = -0.000392893 Jy
! Component: 950  -  total flux cleaned = -0.000418937 Jy
! Component: 1000  -  total flux cleaned = -0.000438175 Jy
! Component: 1050  -  total flux cleaned = -0.000457141 Jy
! Component: 1100  -  total flux cleaned = -0.000463402 Jy
! Component: 1150  -  total flux cleaned = -0.000469786 Jy
! Component: 1200  -  total flux cleaned = -0.000506709 Jy
! Component: 1250  -  total flux cleaned = -0.000531055 Jy
! Component: 1300  -  total flux cleaned = -0.000543211 Jy
! Component: 1350  -  total flux cleaned = -0.000555188 Jy
! Component: 1400  -  total flux cleaned = -0.000567039 Jy
! Component: 1450  -  total flux cleaned = -0.000584717 Jy
! Component: 1500  -  total flux cleaned = -0.000637044 Jy
! Component: 1550  -  total flux cleaned = -0.000636972 Jy
! Component: 1600  -  total flux cleaned = -0.000688411 Jy
! Component: 1650  -  total flux cleaned = -0.000694063 Jy
! Component: 1700  -  total flux cleaned = -0.000727812 Jy
! Component: 1750  -  total flux cleaned = -0.000750207 Jy
! Component: 1800  -  total flux cleaned = -0.000761265 Jy
! Component: 1850  -  total flux cleaned = -0.000799744 Jy
! Component: 1900  -  total flux cleaned = -0.000816121 Jy
! Component: 1950  -  total flux cleaned = -0.000854035 Jy
! Component: 2000  -  total flux cleaned = -0.000870208 Jy
! Component: 2050  -  total flux cleaned = -0.000886231 Jy
! Component: 2100  -  total flux cleaned = -0.000891536 Jy
! Component: 2150  -  total flux cleaned = -0.000907371 Jy
! Component: 2200  -  total flux cleaned = -0.000907362 Jy
! Component: 2250  -  total flux cleaned = -0.000928168 Jy
! Component: 2300  -  total flux cleaned = -0.000943669 Jy
! Component: 2350  -  total flux cleaned = -0.00093856 Jy
! Component: 2400  -  total flux cleaned = -0.000958911 Jy
! Component: 2450  -  total flux cleaned = -0.000958892 Jy
! Component: 2500  -  total flux cleaned = -0.00095887 Jy
! Component: 2550  -  total flux cleaned = -0.000983911 Jy
! Component: 2600  -  total flux cleaned = -0.000983911 Jy
! Component: 2650  -  total flux cleaned = -0.00098893 Jy
! Component: 2700  -  total flux cleaned = -0.0010185 Jy
! Component: 2750  -  total flux cleaned = -0.00100867 Jy
! Component: 2800  -  total flux cleaned = -0.0010379 Jy
! Component: 2850  -  total flux cleaned = -0.00102335 Jy
! Component: 2900  -  total flux cleaned = -0.00103781 Jy
! Component: 2950  -  total flux cleaned = -0.00106662 Jy
! Component: 3000  -  total flux cleaned = -0.0010618 Jy
! Component: 3050  -  total flux cleaned = -0.00107128 Jy
! Component: 3100  -  total flux cleaned = -0.00104766 Jy
! Component: 3150  -  total flux cleaned = -0.00105704 Jy
! Component: 3200  -  total flux cleaned = -0.00106642 Jy
! Component: 3250  -  total flux cleaned = -0.00107572 Jy
! Component: 3300  -  total flux cleaned = -0.00107111 Jy
! Component: 3350  -  total flux cleaned = -0.00106195 Jy
! Component: 3400  -  total flux cleaned = -0.00107114 Jy
! Component: 3450  -  total flux cleaned = -0.00109396 Jy
! Component: 3500  -  total flux cleaned = -0.00108945 Jy
! Component: 3550  -  total flux cleaned = -0.00108496 Jy
! Component: 3600  -  total flux cleaned = -0.001103 Jy
! Component: 3650  -  total flux cleaned = -0.00109853 Jy
! Component: 3700  -  total flux cleaned = -0.00112081 Jy
! Component: 3750  -  total flux cleaned = -0.00112526 Jy
! Component: 3800  -  total flux cleaned = -0.00111645 Jy
! Component: 3850  -  total flux cleaned = -0.00112525 Jy
! Component: 3900  -  total flux cleaned = -0.00116026 Jy
! Component: 3950  -  total flux cleaned = -0.00115587 Jy
! Component: 4000  -  total flux cleaned = -0.00115151 Jy
! Component: 4050  -  total flux cleaned = -0.00116445 Jy
! Total flux subtracted in 4096 components = -0.00117737 Jy
! Clean residual min=-0.000272 max=0.000299 Jy/beam
! Clean residual mean=-0.000000 rms=0.000078 Jy/beam
! Combined flux in latest and established models = 0.0189002 Jy
keep
! Adding 335 model components to the UV plane model.
! The established model now contains 427 components and 0.0189002 Jy
![Exited script file: /opt64/bin/pima_mupet_02.dfm]
wmap   /vlbi/vcs9/uvm//J1223+5826_X_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.951 x 2.297 at 10.6 degrees (North through East)
! Clean map  min=-0.00046828  max=0.017404 Jy/beam
! Writing clean map to FITS file: /vlbi/vcs9/uvm//J1223+5826_X_a_map.fits
wmodel /vlbi/vcs9/uvm//J1223+5826_X_a_map.mod
! Writing 427 model components to file: /vlbi/vcs9/uvm//J1223+5826_X_a_map.mod
wobs   /vlbi/vcs9/uvm//J1223+5826_X_a_uvs.fits
! Writing UV FITS file: /vlbi/vcs9/uvm//J1223+5826_X_a_uvs.fits
wwins  /vlbi/vcs9/uvm//J1223+5826_X_a_map.win
! wwins: Wrote 5 windows to /vlbi/vcs9/uvm//J1223+5826_X_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0174042 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 7.75287e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.33638 1.33638 2.67276 5.34551 10.691 21.3821 42.7641 85.5282
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0002 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.017 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  224.487 
quit
! Quitting program
! Log file /vlbi/vcs9/uvm//J1223+5826_X_a_dfm.log closed on Tue Dec 26 22:23:25 2017