! Started logfile: /vlbi/vcs9/uvm//J1138+4608_C_a_dfm.log on Tue Dec 26 22:18:23 2017 float field_size field_size = 1024 float field_cell field_cell = 0.3000 float taper_size taper_size = 40.0 float freq freq = 4.12800 obs /vlbi/vcs9/uvm//J1138+4608_C_a_uvm.fits ! Reading UV FITS file: /vlbi/vcs9/uvm//J1138+4608_C_a_uvm.fits ! AN table 1: 18 integrations on 28 of 28 possible baselines. ! AN table 2: 105 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.850498 visibilities/baseline/integration-bin. ! Found source: J1138+4608 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 4.128e+09 3.2e+07 1 3.2e+07 ! 02 2 4.16e+09 3.2e+07 1 3.2e+07 ! 03 3 4.192e+09 3.2e+07 1 3.2e+07 ! 04 4 4.224e+09 3.2e+07 1 3.2e+07 ! 05 5 4.416e+09 3.2e+07 1 3.2e+07 ! 06 6 4.512e+09 3.2e+07 1 3.2e+07 ! 07 7 4.544e+09 3.2e+07 1 3.2e+07 ! 08 8 4.576e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 76 lines of history. ! ! Reading 18432 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 8 channels. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.3 print "taper_size =", taper_size ! taper_size = 40 ![@/opt64/bin/pima_mupet_02.dfm J1138+4608_C] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 60 float amp_soltime2 amp_soltime2 = 5 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.1 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_02.dvm version of 2017.12.26 === " ! === Difmap script: pima_mupet_02.dvm version of 2017.12.26 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.0355679 Jy startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 80 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 80 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 80 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 80 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 80 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 80 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 80 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 80 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.001068Jy sigma=27.950093 ! Fit after self-cal, rms=0.984926Jy sigma=27.506220 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. peakwin win_mult ! Inverting map and beam ! Estimated beam: bmin=2.182 mas, bmaj=4.575 mas, bpa=21.55 degrees ! Estimated noise=0.356644 mJy/beam. ! Added new window around map position (0, 0). flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0131832 Jy ! Component: 100 - total flux cleaned = 0.0157909 Jy ! Total flux subtracted in 100 components = 0.0157909 Jy ! Clean residual min=-0.001049 max=0.001212 Jy/beam ! Clean residual mean=0.000001 rms=0.000267 Jy/beam ! Combined flux in latest and established models = 0.0157908 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.0157908 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.031943Jy sigma=0.714316 ! Fit after self-cal, rms=0.031913Jy sigma=0.713263 ! Inverting map print "============== Finished uniform weighting CLEAN ==============" ! ============== Finished uniform weighting CLEAN ============== ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.844 mas, bmaj=4.519 mas, bpa=22.91 degrees ! Estimated noise=0.186582 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000991548 Jy ! Component: 100 - total flux cleaned = 0.0012099 Jy ! Component: 150 - total flux cleaned = 0.0013289 Jy ! Component: 200 - total flux cleaned = 0.00141589 Jy ! Total flux subtracted in 200 components = 0.00141589 Jy ! Clean residual min=-0.000658 max=0.000683 Jy/beam ! Clean residual mean=0.000001 rms=0.000171 Jy/beam ! Combined flux in latest and established models = 0.0172067 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 34 model components to the UV plane model. ! The established model now contains 44 components and 0.0172067 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.031899Jy sigma=0.712507 ! Fit after self-cal, rms=0.031899Jy sigma=0.712496 ! Inverting map print "============== Finished natural weighting CLEAN ==============" ! ============== Finished natural weighting CLEAN ============== ! gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00279 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.06 HN 0.93 KP 1.02 ! LA 0.75 MK 1.04 NL 1.15 OV 1.00 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 1.06171 ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 0.85 HN 0.98 KP 0.90 ! LA 1.06 NL 0.91 OV 0.95 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.969433 ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 0.84 HN 1.28 KP 1.07 ! LA 0.96 MK 0.98 NL 1.01 OV 0.97 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 1.03856 ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.97 HN 0.92 KP 0.99 ! LA 0.95 NL 0.89 OV 1.02 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.972112 ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 1.08 HN 1.38 KP 1.43 ! LA 1.05 MK 0.69 NL 0.77 OV 0.94 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 1.04123 ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 FD 0.94 HN 0.94 KP 1.00 ! LA 0.95 NL 0.88 OV 1.08 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.910504 ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.19 HN 1.02 KP 1.46 ! LA 0.87 MK 0.88 NL 1.16 OV 1.14 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 1.0313 ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 1.04 HN 0.88 KP 0.95 ! LA 1.07 NL 0.99 OV 0.93 ! ! ! Correcting IF 5. ! Amplitude normalization factor in sub-array 1: 0.966099 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.10 HN 1.02 KP 1.24 ! LA 1.06 MK 0.64 NL 1.08 OV 1.17 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 1.03244 ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 1.05 HN 1.00 KP 0.88 ! LA 0.94 NL 0.92 OV 1.04 ! ! ! Correcting IF 6. ! Amplitude normalization factor in sub-array 1: 0.898305 ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.36 HN 0.98 KP 1.16 ! LA 0.87 MK 1.30 NL 1.14 OV 1.14 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 0.961796 ! Telescope amplitude corrections in sub-array 2: ! BR 1.07 FD 1.18 HN 1.13 KP 0.93 ! LA 0.90 NL 1.02 OV 1.06 ! ! ! Correcting IF 7. ! Amplitude normalization factor in sub-array 1: 0.867152 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.29 HN 1.08 KP 1.22 ! LA 1.10 MK 1.59 NL 1.11 OV 0.89 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 0.955072 ! Telescope amplitude corrections in sub-array 2: ! BR 1.14 FD 1.04 HN 1.01 KP 0.94 ! LA 1.00 NL 1.24 OV 0.96 ! ! ! Correcting IF 8. ! Amplitude normalization factor in sub-array 1: 0.756311 ! Telescope amplitude corrections in sub-array 1: ! BR 0.73 FD 1.02 HN 1.23 KP 1.18 ! LA 1.19 MK 1.40 NL 2.64 OV 1.18 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 0.962276 ! Telescope amplitude corrections in sub-array 2: ! BR 1.06 FD 1.03 HN 0.88 KP 1.00 ! LA 1.00 NL 1.24 OV 1.07 ! ! ! Fit before self-cal, rms=0.031899Jy sigma=0.712496 ! Fit after self-cal, rms=0.031993Jy sigma=0.711879 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.031993Jy sigma=0.711879 ! Fit after self-cal, rms=0.031996Jy sigma=0.711852 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.774 mas, bmaj=4.522 mas, bpa=22.79 degrees ! Estimated noise=0.179103 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000290307 Jy ! Component: 100 - total flux cleaned = -0.000211483 Jy ! Component: 150 - total flux cleaned = -0.000165432 Jy ! Component: 200 - total flux cleaned = -0.000149954 Jy ! Total flux subtracted in 200 components = -0.000149954 Jy ! Clean residual min=-0.000787 max=0.000591 Jy/beam ! Clean residual mean=0.000001 rms=0.000170 Jy/beam ! Combined flux in latest and established models = 0.0170568 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 59 components and 0.0170568 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.031999Jy sigma=0.711664 ! Fit after self-cal, rms=0.031999Jy sigma=0.711662 ! Inverting map print "============== Finished amplitude gscale SELF-CAL ==============" ! ============== Finished amplitude gscale SELF-CAL ============== ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.031999Jy sigma=0.711662 ! Fit after self-cal, rms=0.031981Jy sigma=0.710449 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 6.10674e-05 Jy ! Component: 100 - total flux cleaned = 7.85865e-05 Jy ! Component: 150 - total flux cleaned = 8.47761e-05 Jy ! Component: 200 - total flux cleaned = 8.76207e-05 Jy ! Total flux subtracted in 200 components = 8.76207e-05 Jy ! Clean residual min=-0.000808 max=0.000604 Jy/beam ! Clean residual mean=0.000001 rms=0.000171 Jy/beam ! Combined flux in latest and established models = 0.0171444 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 68 components and 0.0171444 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.031980Jy sigma=0.710430 ! Fit after self-cal, rms=0.031985Jy sigma=0.710278 ! Inverting map print "=== Finished natural weighting clean with shorter phase_soltime " ! === Finished natural weighting clean with shorter phase_soltime ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.774 x 4.522 at 22.79 degrees (North through East) ! Clean map min=-0.00079042 max=0.014976 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "============== Finished amplitude self-cal ==============" end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.157 mas, bmaj=4.573 mas, bpa=21.32 degrees ! Estimated noise=0.345882 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0128513 Jy ! Component: 100 - total flux cleaned = 0.0155961 Jy ! Component: 150 - total flux cleaned = 0.016533 Jy ! Component: 200 - total flux cleaned = 0.016856 Jy ! Total flux subtracted in 200 components = 0.016856 Jy ! Clean residual min=-0.001060 max=0.000952 Jy/beam ! Clean residual mean=0.000000 rms=0.000243 Jy/beam ! Combined flux in latest and established models = 0.016856 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.016856 Jy ! Inverting map and beam ! Estimated beam: bmin=2.774 mas, bmaj=4.522 mas, bpa=22.79 degrees ! Estimated noise=0.179103 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000112124 Jy ! Component: 100 - total flux cleaned = 0.000183508 Jy ! Component: 150 - total flux cleaned = 0.000207954 Jy ! Component: 200 - total flux cleaned = 0.00022904 Jy ! Total flux subtracted in 200 components = 0.00022904 Jy ! Clean residual min=-0.000783 max=0.000636 Jy/beam ! Clean residual mean=0.000001 rms=0.000172 Jy/beam ! Combined flux in latest and established models = 0.017085 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 40 components and 0.017085 Jy ! Inverting map clean ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 6.09361e-06 Jy ! Component: 100 - total flux cleaned = 1.70783e-05 Jy ! Component: 150 - total flux cleaned = 2.6628e-05 Jy ! Component: 200 - total flux cleaned = 3.10957e-05 Jy ! Total flux subtracted in 200 components = 3.10957e-05 Jy ! Clean residual min=-0.000789 max=0.000629 Jy/beam ! Clean residual mean=0.000001 rms=0.000171 Jy/beam ! Combined flux in latest and established models = 0.0171161 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 44 components and 0.0171161 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.031982Jy sigma=0.710280 ! Fit after self-cal, rms=0.031988Jy sigma=0.710269 wmodel J1138+4608_C_map.mod ! Writing 44 model components to file: J1138+4608_C_map.mod wobs J1138+4608_C_uvs.fits ! Writing UV FITS file: J1138+4608_C_uvs.fits wwins J1138+4608_C_map.win ! wwins: Wrote 1 windows to J1138+4608_C_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000339781 Jy ! Component: 100 - total flux cleaned = -0.000543289 Jy ! Component: 150 - total flux cleaned = -0.00073053 Jy ! Component: 200 - total flux cleaned = -0.000886208 Jy ! Component: 250 - total flux cleaned = -0.00105455 Jy ! Component: 300 - total flux cleaned = -0.00118776 Jy ! Component: 350 - total flux cleaned = -0.00129845 Jy ! Component: 400 - total flux cleaned = -0.00137903 Jy ! Component: 450 - total flux cleaned = -0.00144864 Jy ! Component: 500 - total flux cleaned = -0.00150826 Jy ! Component: 550 - total flux cleaned = -0.00158288 Jy ! Component: 600 - total flux cleaned = -0.00163164 Jy ! Component: 650 - total flux cleaned = -0.00168739 Jy ! Component: 700 - total flux cleaned = -0.001711 Jy ! Component: 750 - total flux cleaned = -0.00176448 Jy ! Component: 800 - total flux cleaned = -0.00177193 Jy ! Component: 850 - total flux cleaned = -0.00179404 Jy ! Component: 900 - total flux cleaned = -0.00180866 Jy ! Component: 950 - total flux cleaned = -0.00182293 Jy ! Component: 1000 - total flux cleaned = -0.0018579 Jy ! Component: 1050 - total flux cleaned = -0.0018509 Jy ! Component: 1100 - total flux cleaned = -0.00185098 Jy ! Component: 1150 - total flux cleaned = -0.00186434 Jy ! Component: 1200 - total flux cleaned = -0.00186423 Jy ! Component: 1250 - total flux cleaned = -0.0018512 Jy ! Component: 1300 - total flux cleaned = -0.00183852 Jy ! Component: 1350 - total flux cleaned = -0.00185119 Jy ! Component: 1400 - total flux cleaned = -0.00186368 Jy ! Component: 1450 - total flux cleaned = -0.00187596 Jy ! Component: 1500 - total flux cleaned = -0.00186994 Jy ! Component: 1550 - total flux cleaned = -0.0019118 Jy ! Component: 1600 - total flux cleaned = -0.00191172 Jy ! Component: 1650 - total flux cleaned = -0.00187079 Jy ! Component: 1700 - total flux cleaned = -0.0018767 Jy ! Component: 1750 - total flux cleaned = -0.00187095 Jy ! Component: 1800 - total flux cleaned = -0.00188225 Jy ! Component: 1850 - total flux cleaned = -0.00184326 Jy ! Component: 1900 - total flux cleaned = -0.00184879 Jy ! Component: 1950 - total flux cleaned = -0.00187611 Jy ! Component: 2000 - total flux cleaned = -0.00184372 Jy ! Component: 2050 - total flux cleaned = -0.00186519 Jy ! Component: 2100 - total flux cleaned = -0.00184926 Jy ! Component: 2150 - total flux cleaned = -0.00184926 Jy ! Component: 2200 - total flux cleaned = -0.00184402 Jy ! Component: 2250 - total flux cleaned = -0.00184923 Jy ! Component: 2300 - total flux cleaned = -0.00185431 Jy ! Component: 2350 - total flux cleaned = -0.0018442 Jy ! Component: 2400 - total flux cleaned = -0.00185416 Jy ! Component: 2450 - total flux cleaned = -0.00184422 Jy ! Component: 2500 - total flux cleaned = -0.00184424 Jy ! Component: 2550 - total flux cleaned = -0.00183457 Jy ! Component: 2600 - total flux cleaned = -0.00182496 Jy ! Component: 2650 - total flux cleaned = -0.00182976 Jy ! Component: 2700 - total flux cleaned = -0.0018392 Jy ! Component: 2750 - total flux cleaned = -0.0018345 Jy ! Component: 2800 - total flux cleaned = -0.00183454 Jy ! Component: 2850 - total flux cleaned = -0.00183912 Jy ! Component: 2900 - total flux cleaned = -0.00182086 Jy ! Component: 2950 - total flux cleaned = -0.00182082 Jy ! Component: 3000 - total flux cleaned = -0.00180286 Jy ! Component: 3050 - total flux cleaned = -0.00180726 Jy ! Component: 3100 - total flux cleaned = -0.00179399 Jy ! Component: 3150 - total flux cleaned = -0.00177637 Jy ! Component: 3200 - total flux cleaned = -0.00180689 Jy ! Component: 3250 - total flux cleaned = -0.00179386 Jy ! Component: 3300 - total flux cleaned = -0.00178953 Jy ! Component: 3350 - total flux cleaned = -0.00178528 Jy ! Component: 3400 - total flux cleaned = -0.00177679 Jy ! Component: 3450 - total flux cleaned = -0.0017894 Jy ! Component: 3500 - total flux cleaned = -0.00177686 Jy ! Component: 3550 - total flux cleaned = -0.00177267 Jy ! Component: 3600 - total flux cleaned = -0.00176023 Jy ! Component: 3650 - total flux cleaned = -0.00173148 Jy ! Component: 3700 - total flux cleaned = -0.00171518 Jy ! Component: 3750 - total flux cleaned = -0.0017071 Jy ! Component: 3800 - total flux cleaned = -0.00170308 Jy ! Component: 3850 - total flux cleaned = -0.00167504 Jy ! Component: 3900 - total flux cleaned = -0.00165518 Jy ! Component: 3950 - total flux cleaned = -0.00165129 Jy ! Component: 4000 - total flux cleaned = -0.00163951 Jy ! Component: 4050 - total flux cleaned = -0.00164341 Jy ! Total flux subtracted in 4096 components = -0.0016123 Jy ! Clean residual min=-0.000194 max=0.000209 Jy/beam ! Clean residual mean=0.000001 rms=0.000077 Jy/beam ! Combined flux in latest and established models = 0.0155038 Jy keep ! Adding 340 model components to the UV plane model. ! The established model now contains 384 components and 0.0155038 Jy ![Exited script file: /opt64/bin/pima_mupet_02.dfm] wmap /vlbi/vcs9/uvm//J1138+4608_C_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.774 x 4.522 at 22.79 degrees (North through East) ! Clean map min=-0.00060252 max=0.015121 Jy/beam ! Writing clean map to FITS file: /vlbi/vcs9/uvm//J1138+4608_C_a_map.fits wmodel /vlbi/vcs9/uvm//J1138+4608_C_a_map.mod ! Writing 384 model components to file: /vlbi/vcs9/uvm//J1138+4608_C_a_map.mod wobs /vlbi/vcs9/uvm//J1138+4608_C_a_uvs.fits ! Writing UV FITS file: /vlbi/vcs9/uvm//J1138+4608_C_a_uvs.fits wwins /vlbi/vcs9/uvm//J1138+4608_C_a_map.win ! wwins: Wrote 2 windows to /vlbi/vcs9/uvm//J1138+4608_C_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0151214 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 7.60472e-05 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.50873 1.50873 3.01746 6.03493 12.0699 24.1397 48.2794 96.5588 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0002 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.015 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 198.842 quit ! Quitting program ! Log file /vlbi/vcs9/uvm//J1138+4608_C_a_dfm.log closed on Tue Dec 26 22:18:27 2017