! Started logfile: /vlbi/vcs9/uvm//J1052-1453_X_a_dfm.log on Tue Dec 26 22:14:37 2017
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    7.39200
obs     /vlbi/vcs9/uvm//J1052-1453_X_a_uvm.fits
! Reading UV FITS file: /vlbi/vcs9/uvm//J1052-1453_X_a_uvm.fits
! AN table 1: 26 integrations on 21 of 21 possible baselines.
! AN table 2: 97 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.794298 visibilities/baseline/integration-bin.
! Found source: J1052-1453
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 94 lines of history.
! 
! Reading 20728 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_02.dfm J1052-1453_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 60
float amp_soltime2
amp_soltime2 = 5
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.1
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_02.dvm version of 2017.12.26 === "
! === Difmap script: pima_mupet_02.dvm version of 2017.12.26 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.0387919 Jy 
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 37 telescope corrections were flagged in sub-array 1.
!  A total of 69 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 37 telescope corrections were flagged in sub-array 1.
!  A total of 69 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 37 telescope corrections were flagged in sub-array 1.
!  A total of 69 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 37 telescope corrections were flagged in sub-array 1.
!  A total of 69 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 5.
!  A total of 37 telescope corrections were flagged in sub-array 1.
!  A total of 69 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 6.
!  A total of 37 telescope corrections were flagged in sub-array 1.
!  A total of 69 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 7.
!  A total of 37 telescope corrections were flagged in sub-array 1.
!  A total of 69 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 8.
!  A total of 37 telescope corrections were flagged in sub-array 1.
!  A total of 69 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.001114Jy  sigma=24.001163
! Fit after  self-cal, rms=0.981652Jy  sigma=23.535715
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
peakwin win_mult
! Inverting map and beam 
! Estimated beam: bmin=1.554 mas, bmaj=5.204 mas, bpa=-3.777 degrees
! Estimated noise=0.408855 mJy/beam.
! Added new window around map position (0, 0).
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0152754 Jy
! Component: 100  -  total flux cleaned = 0.0185378 Jy
! Total flux subtracted in 100 components = 0.0185378 Jy
! Clean residual min=-0.001228 max=0.001252 Jy/beam
! Clean residual mean=-0.000001 rms=0.000339 Jy/beam
! Combined flux in latest and established models = 0.0185378 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.0185378 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033660Jy  sigma=0.712013
! Fit after  self-cal, rms=0.033645Jy  sigma=0.711588
! Inverting map 
print "============== Finished uniform weighting CLEAN =============="
! ============== Finished uniform weighting CLEAN ============== 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.071 mas, bmaj=5.753 mas, bpa=-5.568 degrees
! Estimated noise=0.205084 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0026172 Jy
! Component: 100  -  total flux cleaned = 0.00382007 Jy
! Component: 150  -  total flux cleaned = 0.00444695 Jy
! Component: 200  -  total flux cleaned = 0.00481801 Jy
! Total flux subtracted in 200 components = 0.00481801 Jy
! Clean residual min=-0.000840 max=0.000781 Jy/beam
! Clean residual mean=-0.000001 rms=0.000218 Jy/beam
! Combined flux in latest and established models = 0.0233559 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 59 model components to the UV plane model.
! The established model now contains 79 components and 0.0233559 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033529Jy  sigma=0.707844
! Fit after  self-cal, rms=0.033529Jy  sigma=0.707813
! Inverting map 
print "============== Finished natural weighting CLEAN =============="
! ============== Finished natural weighting CLEAN ============== 
! 
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.955533
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.15     KP        1.16     LA        1.08     
!   NL        0.94     OV        1.01     PT        0.96     
! 
!  A total of 12 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.997771
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.91     FD        0.94     HN        0.90     KP        1.07     
!   LA        0.93     NL        1.04     OV        1.22     PT        1.00     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.927129
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.39     FD        1.04     KP        1.12     LA        1.06     
!   NL        1.05     OV        1.02     PT        0.87     
! 
!  A total of 12 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.948363
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.03     FD        1.05     HN        1.05     KP        0.94     
!   LA        1.14     NL        1.06     OV        1.22     PT        0.94     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.978151
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        0.84     KP        1.12     LA        1.11     
!   NL        0.91     OV        0.97     PT        1.12     
! 
!  A total of 12 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 1.02403
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.08     FD        0.94     HN        1.04     KP        0.82     
!   LA        0.94     NL        1.02     OV        1.10     PT        0.87     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.944983
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.91     KP        0.94     LA        1.05     
!   NL        0.95     OV        1.42     PT        1.12     
! 
!  A total of 12 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 1.02514
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00     FD        0.86     HN        0.77     KP        1.05     
!   LA        0.93     NL        1.10     OV        1.06     PT        1.03     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.898119
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.51     FD        1.19     KP        0.71     LA        1.04     
!   NL        1.06     OV        1.06     PT        1.22     
! 
!  A total of 12 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.973574
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.95     FD        1.08     HN        1.17     KP        0.98     
!   LA        1.08     NL        0.89     OV        1.08     PT        0.98     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.951202
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.37     FD        0.84     KP        0.89     LA        1.11     
!   NL        1.19     OV        1.09     PT        0.87     
! 
!  A total of 12 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 0.996788
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.03     FD        1.03     HN        0.88     KP        1.02     
!   LA        1.01     NL        0.92     OV        1.02     PT        1.12     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.00623
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.86     KP        1.09     LA        1.15     
!   NL        0.90     OV        0.86     PT        1.14     
! 
!  A total of 12 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 1.05629
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.81     FD        0.90     HN        0.79     KP        0.88     
!   LA        1.01     NL        1.14     OV        1.09     PT        0.94     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.968874
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.07     KP        0.93     LA        1.09     
!   NL        1.21     OV        0.89     PT        1.07     
! 
!  A total of 12 telescope corrections were flagged in sub-array 2.
!  Amplitude normalization factor in sub-array 2: 1.02914
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.84     FD        1.10     HN        0.86     KP        0.90     
!   LA        0.89     NL        1.11     OV        1.06     PT        1.00     
! 
! 
! Fit before self-cal, rms=0.033529Jy  sigma=0.707813
! Fit after  self-cal, rms=0.033358Jy  sigma=0.706382
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033358Jy  sigma=0.706382
! Fit after  self-cal, rms=0.033361Jy  sigma=0.706358
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.05 mas, bmaj=5.707 mas, bpa=-5.838 degrees
! Estimated noise=0.200309 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -7.02681e-05 Jy
! Component: 100  -  total flux cleaned = -8.00024e-05 Jy
! Component: 150  -  total flux cleaned = -8.61409e-05 Jy
! Component: 200  -  total flux cleaned = -9.45126e-05 Jy
! Total flux subtracted in 200 components = -9.45126e-05 Jy
! Clean residual min=-0.000664 max=0.000682 Jy/beam
! Clean residual mean=-0.000002 rms=0.000194 Jy/beam
! Combined flux in latest and established models = 0.0232613 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 26 model components to the UV plane model.
! The established model now contains 99 components and 0.0232613 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033360Jy  sigma=0.706277
! Fit after  self-cal, rms=0.033360Jy  sigma=0.706270
! Inverting map 
print "============== Finished amplitude gscale SELF-CAL =============="
! ============== Finished amplitude gscale SELF-CAL ============== 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033360Jy  sigma=0.706270
! Fit after  self-cal, rms=0.033317Jy  sigma=0.704908
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 6.00395e-05 Jy
! Component: 100  -  total flux cleaned = 7.65366e-05 Jy
! Component: 150  -  total flux cleaned = 8.31757e-05 Jy
! Component: 200  -  total flux cleaned = 8.03047e-05 Jy
! Total flux subtracted in 200 components = 8.03047e-05 Jy
! Clean residual min=-0.000675 max=0.000674 Jy/beam
! Clean residual mean=-0.000002 rms=0.000194 Jy/beam
! Combined flux in latest and established models = 0.0233416 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 20 model components to the UV plane model.
! The established model now contains 112 components and 0.0233416 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033315Jy  sigma=0.704888
! Fit after  self-cal, rms=0.033311Jy  sigma=0.704680
! Inverting map 
print "=== Finished natural weighting clean with shorter phase_soltime "
! === Finished natural weighting clean with shorter phase_soltime  
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.05 x 5.707 at -5.838 degrees (North through East)
! Clean map  min=-0.00067426  max=0.018923 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "============== Finished amplitude self-cal =============="
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.54 mas, bmaj=5.158 mas, bpa=-3.811 degrees
! Estimated noise=0.402028 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0150163 Jy
! Component: 100  -  total flux cleaned = 0.018348 Jy
! Component: 150  -  total flux cleaned = 0.0200317 Jy
! Component: 200  -  total flux cleaned = 0.0210751 Jy
! Total flux subtracted in 200 components = 0.0210751 Jy
! Clean residual min=-0.000924 max=0.000932 Jy/beam
! Clean residual mean=-0.000001 rms=0.000266 Jy/beam
! Combined flux in latest and established models = 0.0210751 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 32 model components to the UV plane model.
! The established model now contains 32 components and 0.0210751 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.05 mas, bmaj=5.707 mas, bpa=-5.838 degrees
! Estimated noise=0.200309 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00121263 Jy
! Component: 100  -  total flux cleaned = 0.00177128 Jy
! Component: 150  -  total flux cleaned = 0.00199121 Jy
! Component: 200  -  total flux cleaned = 0.00206996 Jy
! Total flux subtracted in 200 components = 0.00206996 Jy
! Clean residual min=-0.000699 max=0.000679 Jy/beam
! Clean residual mean=-0.000002 rms=0.000198 Jy/beam
! Combined flux in latest and established models = 0.0231451 Jy
! Adding 37 model components to the UV plane model.
! The established model now contains 69 components and 0.0231451 Jy
! Inverting map 
clean
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 4.7299e-05 Jy
! Component: 100  -  total flux cleaned = 8.57141e-05 Jy
! Component: 150  -  total flux cleaned = 0.000113131 Jy
! Component: 200  -  total flux cleaned = 0.000120903 Jy
! Total flux subtracted in 200 components = 0.000120903 Jy
! Clean residual min=-0.000689 max=0.000683 Jy/beam
! Clean residual mean=-0.000002 rms=0.000196 Jy/beam
! Combined flux in latest and established models = 0.023266 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 25 model components to the UV plane model.
! The established model now contains 88 components and 0.023266 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033312Jy  sigma=0.704719
! Fit after  self-cal, rms=0.033312Jy  sigma=0.704668
wmodel J1052-1453_X_map.mod
! Writing 88 model components to file: J1052-1453_X_map.mod
wobs   J1052-1453_X_uvs.fits
! Writing UV FITS file: J1052-1453_X_uvs.fits
wwins  J1052-1453_X_map.win
! wwins: Wrote 1 windows to J1052-1453_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -1.35427e-05 Jy
! Component: 100  -  total flux cleaned = 4.00073e-05 Jy
! Component: 150  -  total flux cleaned = 7.95907e-05 Jy
! Component: 200  -  total flux cleaned = 8.93112e-05 Jy
! Component: 250  -  total flux cleaned = 0.000116491 Jy
! Component: 300  -  total flux cleaned = 0.000133889 Jy
! Component: 350  -  total flux cleaned = 0.000175752 Jy
! Component: 400  -  total flux cleaned = 0.000184218 Jy
! Component: 450  -  total flux cleaned = 0.000192298 Jy
! Component: 500  -  total flux cleaned = 0.000184857 Jy
! Component: 550  -  total flux cleaned = 0.000192445 Jy
! Component: 600  -  total flux cleaned = 0.000192475 Jy
! Component: 650  -  total flux cleaned = 0.000199549 Jy
! Component: 700  -  total flux cleaned = 0.000206333 Jy
! Component: 750  -  total flux cleaned = 0.000206254 Jy
! Component: 800  -  total flux cleaned = 0.00019309 Jy
! Component: 850  -  total flux cleaned = 0.000193128 Jy
! Component: 900  -  total flux cleaned = 0.000180473 Jy
! Component: 950  -  total flux cleaned = 0.000162171 Jy
! Component: 1000  -  total flux cleaned = 0.000162064 Jy
! Component: 1050  -  total flux cleaned = 0.000115214 Jy
! Component: 1100  -  total flux cleaned = 9.80505e-05 Jy
! Component: 1150  -  total flux cleaned = 6.42514e-05 Jy
! Component: 1200  -  total flux cleaned = 4.2225e-05 Jy
! Component: 1250  -  total flux cleaned = 9.84483e-06 Jy
! Component: 1300  -  total flux cleaned = -8.18007e-07 Jy
! Component: 1350  -  total flux cleaned = -1.65341e-05 Jy
! Component: 1400  -  total flux cleaned = -2.15568e-05 Jy
! Component: 1450  -  total flux cleaned = -3.66912e-05 Jy
! Component: 1500  -  total flux cleaned = -4.15623e-05 Jy
! Component: 1550  -  total flux cleaned = -5.12385e-05 Jy
! Component: 1600  -  total flux cleaned = -6.56088e-05 Jy
! Component: 1650  -  total flux cleaned = -8.91945e-05 Jy
! Component: 1700  -  total flux cleaned = -0.000103156 Jy
! Component: 1750  -  total flux cleaned = -9.85234e-05 Jy
! Component: 1800  -  total flux cleaned = -9.40354e-05 Jy
! Component: 1850  -  total flux cleaned = -8.96085e-05 Jy
! Component: 1900  -  total flux cleaned = -8.96306e-05 Jy
! Component: 1950  -  total flux cleaned = -8.52313e-05 Jy
! Component: 2000  -  total flux cleaned = -7.22466e-05 Jy
! Component: 2050  -  total flux cleaned = -6.79059e-05 Jy
! Component: 2100  -  total flux cleaned = -4.24417e-05 Jy
! Component: 2150  -  total flux cleaned = -2.15244e-05 Jy
! Component: 2200  -  total flux cleaned = -2.57301e-05 Jy
! Component: 2250  -  total flux cleaned = -2.57385e-05 Jy
! Component: 2300  -  total flux cleaned = -1.75824e-05 Jy
! Component: 2350  -  total flux cleaned = -1.35303e-05 Jy
! Component: 2400  -  total flux cleaned = -9.52518e-06 Jy
! Component: 2450  -  total flux cleaned = 2.33904e-06 Jy
! Component: 2500  -  total flux cleaned = 2.30424e-06 Jy
! Component: 2550  -  total flux cleaned = 1.40467e-05 Jy
! Component: 2600  -  total flux cleaned = 2.95174e-05 Jy
! Component: 2650  -  total flux cleaned = 4.10231e-05 Jy
! Component: 2700  -  total flux cleaned = 5.24579e-05 Jy
! Component: 2750  -  total flux cleaned = 6.00395e-05 Jy
! Component: 2800  -  total flux cleaned = 6.75355e-05 Jy
! Component: 2850  -  total flux cleaned = 8.61689e-05 Jy
! Component: 2900  -  total flux cleaned = 8.98183e-05 Jy
! Component: 2950  -  total flux cleaned = 0.00010086 Jy
! Component: 3000  -  total flux cleaned = 0.000104523 Jy
! Component: 3050  -  total flux cleaned = 0.000111769 Jy
! Component: 3100  -  total flux cleaned = 0.000108213 Jy
! Component: 3150  -  total flux cleaned = 0.000118931 Jy
! Component: 3200  -  total flux cleaned = 0.000122508 Jy
! Component: 3250  -  total flux cleaned = 0.000136668 Jy
! Component: 3300  -  total flux cleaned = 0.000136695 Jy
! Component: 3350  -  total flux cleaned = 0.00015064 Jy
! Component: 3400  -  total flux cleaned = 0.000157554 Jy
! Component: 3450  -  total flux cleaned = 0.000154116 Jy
! Component: 3500  -  total flux cleaned = 0.000171235 Jy
! Component: 3550  -  total flux cleaned = 0.000178044 Jy
! Component: 3600  -  total flux cleaned = 0.000184826 Jy
! Component: 3650  -  total flux cleaned = 0.000194898 Jy
! Component: 3700  -  total flux cleaned = 0.000208302 Jy
! Component: 3750  -  total flux cleaned = 0.000221605 Jy
! Component: 3800  -  total flux cleaned = 0.000228231 Jy
! Component: 3850  -  total flux cleaned = 0.000234836 Jy
! Component: 3900  -  total flux cleaned = 0.000241424 Jy
! Component: 3950  -  total flux cleaned = 0.000254478 Jy
! Component: 4000  -  total flux cleaned = 0.00028049 Jy
! Component: 4050  -  total flux cleaned = 0.000303156 Jy
! Total flux subtracted in 4096 components = 0.000328989 Jy
! Clean residual min=-0.000170 max=0.000174 Jy/beam
! Clean residual mean=-0.000000 rms=0.000065 Jy/beam
! Combined flux in latest and established models = 0.023595 Jy
keep
! Adding 338 model components to the UV plane model.
! The established model now contains 426 components and 0.023595 Jy
![Exited script file: /opt64/bin/pima_mupet_02.dfm]
wmap   /vlbi/vcs9/uvm//J1052-1453_X_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.05 x 5.707 at -5.838 degrees (North through East)
! Clean map  min=-0.00052449  max=0.018929 Jy/beam
! Writing clean map to FITS file: /vlbi/vcs9/uvm//J1052-1453_X_a_map.fits
wmodel /vlbi/vcs9/uvm//J1052-1453_X_a_map.mod
! Writing 426 model components to file: /vlbi/vcs9/uvm//J1052-1453_X_a_map.mod
wobs   /vlbi/vcs9/uvm//J1052-1453_X_a_uvs.fits
! Writing UV FITS file: /vlbi/vcs9/uvm//J1052-1453_X_a_uvs.fits
wwins  /vlbi/vcs9/uvm//J1052-1453_X_a_map.win
! wwins: Wrote 2 windows to /vlbi/vcs9/uvm//J1052-1453_X_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0189293 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 6.14789e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.974346 0.974346 1.94869 3.89738 7.79477 15.5895 31.1791 62.3581
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.018 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  307.898 
quit
! Quitting program
! Log file /vlbi/vcs9/uvm//J1052-1453_X_a_dfm.log closed on Tue Dec 26 22:14:41 2017