! Started logfile: /vlbi/vcs9/uvm//J1026+0627_X_a_dfm.log on Tue Dec 26 22:10:52 2017
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    7.39200
obs     /vlbi/vcs9/uvm//J1026+0627_X_a_uvm.fits
! Reading UV FITS file: /vlbi/vcs9/uvm//J1026+0627_X_a_uvm.fits
! AN table 1: 235 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.875272 visibilities/baseline/integration-bin.
! Found source: J1026+0627
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 94 lines of history.
! 
! Reading 74048 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_02.dfm J1026+0627_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 60
float amp_soltime2
amp_soltime2 = 5
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.1
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_02.dvm version of 2017.12.26 === "
! === Difmap script: pima_mupet_02.dvm version of 2017.12.26 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.0348301 Jy 
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 245 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 245 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 245 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 245 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 245 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 245 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 245 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 245 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.000965Jy  sigma=26.011871
! Fit after  self-cal, rms=0.985728Jy  sigma=25.598401
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
peakwin win_mult
! Inverting map and beam 
! Estimated beam: bmin=0.7399 mas, bmaj=2.005 mas, bpa=-9.248 degrees
! Estimated noise=0.254135 mJy/beam.
! Added new window around map position (0, 0).
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.012715 Jy
! Component: 100  -  total flux cleaned = 0.0148634 Jy
! Total flux subtracted in 100 components = 0.0148634 Jy
! Clean residual min=-0.001636 max=0.001359 Jy/beam
! Clean residual mean=-0.000000 rms=0.000369 Jy/beam
! Combined flux in latest and established models = 0.0148634 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.0148634 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031521Jy  sigma=0.783195
! Fit after  self-cal, rms=0.031512Jy  sigma=0.782974
! Inverting map 
print "============== Finished uniform weighting CLEAN =============="
! ============== Finished uniform weighting CLEAN ============== 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.01 mas, bmaj=2.441 mas, bpa=-9.892 degrees
! Estimated noise=0.10012 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00126877 Jy
! Component: 100  -  total flux cleaned = 0.00172312 Jy
! Component: 150  -  total flux cleaned = 0.00185891 Jy
! Component: 200  -  total flux cleaned = 0.00190234 Jy
! Total flux subtracted in 200 components = 0.00190234 Jy
! Clean residual min=-0.001563 max=0.000783 Jy/beam
! Clean residual mean=-0.000000 rms=0.000288 Jy/beam
! Combined flux in latest and established models = 0.0167658 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 18 model components to the UV plane model.
! The established model now contains 28 components and 0.0167658 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031485Jy  sigma=0.782090
! Fit after  self-cal, rms=0.031485Jy  sigma=0.782079
! Inverting map 
print "============== Finished natural weighting CLEAN =============="
! ============== Finished natural weighting CLEAN ============== 
! 
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.00518
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.13     HN        1.02     KP        0.96     
!   LA        0.84     MK        0.92     NL        1.00     OV        1.01     
!   PT        1.09     SC        0.97     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.98897
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.05     HN        1.07     KP        0.76     
!   LA        0.93     MK        0.98     NL        1.14     OV        1.21     
!   PT        1.04     SC        0.94     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.909545
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.36     FD        1.25     HN        1.08     KP        0.69     
!   LA        1.12     MK        1.07     NL        1.16     OV        1.15     
!   PT        1.12     SC        0.99     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.02827
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.96     HN        0.94     KP        0.80     
!   LA        1.01     MK        0.93     NL        0.98     OV        1.05     
!   PT        0.96     SC        1.06     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.00329
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        0.99     HN        1.02     KP        0.66     
!   LA        1.04     MK        1.09     NL        0.96     OV        1.02     
!   PT        1.13     SC        0.97     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.944737
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.16     FD        1.22     HN        1.02     KP        0.64     
!   LA        0.93     MK        1.08     NL        1.09     OV        1.22     
!   PT        1.28     SC        0.94     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.923106
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.17     HN        1.07     KP        0.66     
!   LA        1.10     MK        1.18     NL        1.21     OV        1.21     
!   PT        1.32     SC        0.88     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.979574
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.13     HN        0.96     KP        0.65     
!   LA        0.98     MK        1.19     NL        1.19     OV        1.13     
!   PT        1.15     SC        0.83     
! 
! 
! Fit before self-cal, rms=0.031485Jy  sigma=0.782079
! Fit after  self-cal, rms=0.030745Jy  sigma=0.777907
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030745Jy  sigma=0.777907
! Fit after  self-cal, rms=0.030747Jy  sigma=0.777872
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.036 mas, bmaj=2.463 mas, bpa=-8.372 degrees
! Estimated noise=0.0930538 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000730472 Jy
! Component: 100  -  total flux cleaned = -0.000827467 Jy
! Component: 150  -  total flux cleaned = -0.000841388 Jy
! Component: 200  -  total flux cleaned = -0.000837863 Jy
! Total flux subtracted in 200 components = -0.000837863 Jy
! Clean residual min=-0.000436 max=0.000449 Jy/beam
! Clean residual mean=0.000000 rms=0.000099 Jy/beam
! Combined flux in latest and established models = 0.0159279 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 20 model components to the UV plane model.
! The established model now contains 45 components and 0.0159279 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030739Jy  sigma=0.777502
! Fit after  self-cal, rms=0.030739Jy  sigma=0.777496
! Inverting map 
print "============== Finished amplitude gscale SELF-CAL =============="
! ============== Finished amplitude gscale SELF-CAL ============== 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030739Jy  sigma=0.777496
! Fit after  self-cal, rms=0.030696Jy  sigma=0.775840
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000152591 Jy
! Component: 100  -  total flux cleaned = 0.000180916 Jy
! Component: 150  -  total flux cleaned = 0.000183438 Jy
! Component: 200  -  total flux cleaned = 0.000185694 Jy
! Total flux subtracted in 200 components = 0.000185694 Jy
! Clean residual min=-0.000460 max=0.000440 Jy/beam
! Clean residual mean=0.000000 rms=0.000098 Jy/beam
! Combined flux in latest and established models = 0.0161136 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 8 model components to the UV plane model.
! The established model now contains 49 components and 0.0161136 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030696Jy  sigma=0.775820
! Fit after  self-cal, rms=0.030695Jy  sigma=0.775653
! Inverting map 
print "=== Finished natural weighting clean with shorter phase_soltime "
! === Finished natural weighting clean with shorter phase_soltime  
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.036 x 2.463 at -8.372 degrees (North through East)
! Clean map  min=-0.00044722  max=0.014097 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "============== Finished amplitude self-cal =============="
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7458 mas, bmaj=2.004 mas, bpa=-8.479 degrees
! Estimated noise=0.245131 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0122883 Jy
! Component: 100  -  total flux cleaned = 0.0144601 Jy
! Component: 150  -  total flux cleaned = 0.015307 Jy
! Component: 200  -  total flux cleaned = 0.0155975 Jy
! Total flux subtracted in 200 components = 0.0155975 Jy
! Clean residual min=-0.001127 max=0.001208 Jy/beam
! Clean residual mean=0.000000 rms=0.000283 Jy/beam
! Combined flux in latest and established models = 0.0155975 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 26 model components to the UV plane model.
! The established model now contains 26 components and 0.0155975 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.036 mas, bmaj=2.463 mas, bpa=-8.372 degrees
! Estimated noise=0.0930538 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-1, 0.8).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00035034 Jy
! Component: 100  -  total flux cleaned = 0.000428897 Jy
! Component: 150  -  total flux cleaned = 0.000502298 Jy
! Component: 200  -  total flux cleaned = 0.000553394 Jy
! Total flux subtracted in 200 components = 0.000553394 Jy
! Clean residual min=-0.000448 max=0.000453 Jy/beam
! Clean residual mean=0.000000 rms=0.000097 Jy/beam
! Combined flux in latest and established models = 0.0161509 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 47 components and 0.0161509 Jy
! Inverting map 
! Added new window around map position (23.4, -37.8).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00026657 Jy
! Component: 100  -  total flux cleaned = 0.00031998 Jy
! Component: 150  -  total flux cleaned = 0.000371881 Jy
! Component: 200  -  total flux cleaned = 0.000411094 Jy
! Total flux subtracted in 200 components = 0.000411094 Jy
! Clean residual min=-0.000405 max=0.000394 Jy/beam
! Clean residual mean=0.000000 rms=0.000085 Jy/beam
! Combined flux in latest and established models = 0.016562 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 74 components and 0.016562 Jy
! Inverting map 
clean
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 2.95997e-05 Jy
! Component: 100  -  total flux cleaned = 4.6007e-05 Jy
! Component: 150  -  total flux cleaned = 5.62714e-05 Jy
! Component: 200  -  total flux cleaned = 6.57967e-05 Jy
! Total flux subtracted in 200 components = 6.57967e-05 Jy
! Clean residual min=-0.000397 max=0.000379 Jy/beam
! Clean residual mean=0.000000 rms=0.000083 Jy/beam
! Combined flux in latest and established models = 0.0166278 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 34 model components to the UV plane model.
! The established model now contains 84 components and 0.0166278 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030688Jy  sigma=0.775421
! Fit after  self-cal, rms=0.030688Jy  sigma=0.775383
wmodel J1026+0627_X_map.mod
! Writing 84 model components to file: J1026+0627_X_map.mod
wobs   J1026+0627_X_uvs.fits
! Writing UV FITS file: J1026+0627_X_uvs.fits
wwins  J1026+0627_X_map.win
! wwins: Wrote 3 windows to J1026+0627_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -5.78455e-05 Jy
! Component: 100  -  total flux cleaned = -3.9774e-05 Jy
! Component: 150  -  total flux cleaned = -2.84322e-05 Jy
! Component: 200  -  total flux cleaned = -3.89925e-05 Jy
! Component: 250  -  total flux cleaned = -4.39467e-05 Jy
! Component: 300  -  total flux cleaned = -4.38348e-05 Jy
! Component: 350  -  total flux cleaned = -4.38847e-05 Jy
! Component: 400  -  total flux cleaned = -5.75166e-05 Jy
! Component: 450  -  total flux cleaned = -6.19599e-05 Jy
! Component: 500  -  total flux cleaned = -6.62913e-05 Jy
! Component: 550  -  total flux cleaned = -7.47632e-05 Jy
! Component: 600  -  total flux cleaned = -9.13514e-05 Jy
! Component: 650  -  total flux cleaned = -7.89473e-05 Jy
! Component: 700  -  total flux cleaned = -7.49164e-05 Jy
! Component: 750  -  total flux cleaned = -7.88953e-05 Jy
! Component: 800  -  total flux cleaned = -7.88442e-05 Jy
! Component: 850  -  total flux cleaned = -7.11312e-05 Jy
! Component: 900  -  total flux cleaned = -7.86543e-05 Jy
! Component: 950  -  total flux cleaned = -5.24819e-05 Jy
! Component: 1000  -  total flux cleaned = -4.51555e-05 Jy
! Component: 1050  -  total flux cleaned = -4.15324e-05 Jy
! Component: 1100  -  total flux cleaned = -3.4282e-05 Jy
! Component: 1150  -  total flux cleaned = -1.99575e-05 Jy
! Component: 1200  -  total flux cleaned = -1.28371e-05 Jy
! Component: 1250  -  total flux cleaned = 1.18964e-06 Jy
! Component: 1300  -  total flux cleaned = 1.50558e-05 Jy
! Component: 1350  -  total flux cleaned = 2.87638e-05 Jy
! Component: 1400  -  total flux cleaned = 4.23519e-05 Jy
! Component: 1450  -  total flux cleaned = 5.24465e-05 Jy
! Component: 1500  -  total flux cleaned = 5.58048e-05 Jy
! Component: 1550  -  total flux cleaned = 6.57299e-05 Jy
! Component: 1600  -  total flux cleaned = 7.55693e-05 Jy
! Component: 1650  -  total flux cleaned = 7.22857e-05 Jy
! Component: 1700  -  total flux cleaned = 7.86937e-05 Jy
! Component: 1750  -  total flux cleaned = 7.87003e-05 Jy
! Component: 1800  -  total flux cleaned = 7.23405e-05 Jy
! Component: 1850  -  total flux cleaned = 6.92131e-05 Jy
! Component: 1900  -  total flux cleaned = 7.23303e-05 Jy
! Component: 1950  -  total flux cleaned = 6.92612e-05 Jy
! Component: 2000  -  total flux cleaned = 7.23629e-05 Jy
! Component: 2050  -  total flux cleaned = 7.23424e-05 Jy
! Component: 2100  -  total flux cleaned = 6.62773e-05 Jy
! Component: 2150  -  total flux cleaned = 6.62799e-05 Jy
! Component: 2200  -  total flux cleaned = 6.02831e-05 Jy
! Component: 2250  -  total flux cleaned = 5.73014e-05 Jy
! Component: 2300  -  total flux cleaned = 5.43305e-05 Jy
! Component: 2350  -  total flux cleaned = 5.13659e-05 Jy
! Component: 2400  -  total flux cleaned = 3.96584e-05 Jy
! Component: 2450  -  total flux cleaned = 3.67544e-05 Jy
! Component: 2500  -  total flux cleaned = 3.38843e-05 Jy
! Component: 2550  -  total flux cleaned = 3.38457e-05 Jy
! Component: 2600  -  total flux cleaned = 2.2409e-05 Jy
! Component: 2650  -  total flux cleaned = 1.67415e-05 Jy
! Component: 2700  -  total flux cleaned = 1.67529e-05 Jy
! Component: 2750  -  total flux cleaned = 8.33425e-06 Jy
! Component: 2800  -  total flux cleaned = 5.54267e-06 Jy
! Component: 2850  -  total flux cleaned = -1.11524e-05 Jy
! Component: 2900  -  total flux cleaned = -8.39564e-06 Jy
! Component: 2950  -  total flux cleaned = -1.11481e-05 Jy
! Component: 3000  -  total flux cleaned = -1.9385e-05 Jy
! Component: 3050  -  total flux cleaned = -2.48228e-05 Jy
! Component: 3100  -  total flux cleaned = -2.21016e-05 Jy
! Component: 3150  -  total flux cleaned = -2.75116e-05 Jy
! Component: 3200  -  total flux cleaned = -3.02224e-05 Jy
! Component: 3250  -  total flux cleaned = -4.09761e-05 Jy
! Component: 3300  -  total flux cleaned = -4.36545e-05 Jy
! Component: 3350  -  total flux cleaned = -4.36627e-05 Jy
! Component: 3400  -  total flux cleaned = -5.42939e-05 Jy
! Component: 3450  -  total flux cleaned = -5.16435e-05 Jy
! Component: 3500  -  total flux cleaned = -5.42981e-05 Jy
! Component: 3550  -  total flux cleaned = -5.43044e-05 Jy
! Component: 3600  -  total flux cleaned = -6.21693e-05 Jy
! Component: 3650  -  total flux cleaned = -6.73964e-05 Jy
! Component: 3700  -  total flux cleaned = -7.00022e-05 Jy
! Component: 3750  -  total flux cleaned = -7.26007e-05 Jy
! Component: 3800  -  total flux cleaned = -7.77917e-05 Jy
! Component: 3850  -  total flux cleaned = -7.26246e-05 Jy
! Component: 3900  -  total flux cleaned = -7.77872e-05 Jy
! Component: 3950  -  total flux cleaned = -8.55056e-05 Jy
! Component: 4000  -  total flux cleaned = -8.29419e-05 Jy
! Component: 4050  -  total flux cleaned = -7.78096e-05 Jy
! Total flux subtracted in 4096 components = -8.03688e-05 Jy
! Clean residual min=-0.000155 max=0.000169 Jy/beam
! Clean residual mean=0.000000 rms=0.000044 Jy/beam
! Combined flux in latest and established models = 0.0165474 Jy
keep
! Adding 269 model components to the UV plane model.
! The established model now contains 353 components and 0.0165474 Jy
![Exited script file: /opt64/bin/pima_mupet_02.dfm]
wmap   /vlbi/vcs9/uvm//J1026+0627_X_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.036 x 2.463 at -8.372 degrees (North through East)
! Clean map  min=-0.00029595  max=0.014362 Jy/beam
! Writing clean map to FITS file: /vlbi/vcs9/uvm//J1026+0627_X_a_map.fits
wmodel /vlbi/vcs9/uvm//J1026+0627_X_a_map.mod
! Writing 353 model components to file: /vlbi/vcs9/uvm//J1026+0627_X_a_map.mod
wobs   /vlbi/vcs9/uvm//J1026+0627_X_a_uvs.fits
! Writing UV FITS file: /vlbi/vcs9/uvm//J1026+0627_X_a_uvs.fits
wwins  /vlbi/vcs9/uvm//J1026+0627_X_a_map.win
! wwins: Wrote 4 windows to /vlbi/vcs9/uvm//J1026+0627_X_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0143618 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 4.056e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.847247 0.847247 1.69449 3.38899 6.77797 13.5559 27.1119 54.2238
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.014 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  354.088 
quit
! Quitting program
! Log file /vlbi/vcs9/uvm//J1026+0627_X_a_dfm.log closed on Tue Dec 26 22:10:58 2017