! Started logfile: /vlbi/vcs9/uvm//J1002-2837_X_a_dfm.log on Tue Dec 26 22:09:20 2017 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 7.39200 obs /vlbi/vcs9/uvm//J1002-2837_X_a_uvm.fits ! Reading UV FITS file: /vlbi/vcs9/uvm//J1002-2837_X_a_uvm.fits ! AN table 1: 92 integrations on 21 of 21 possible baselines. ! AN table 2: 92 integrations on 15 of 15 possible baselines. ! Apparent sampling: 0.82337 visibilities/baseline/integration-bin. ! Found source: J1002-2837 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 7.392e+09 3.2e+07 1 3.2e+07 ! 02 2 7.424e+09 3.2e+07 1 3.2e+07 ! 03 3 7.456e+09 3.2e+07 1 3.2e+07 ! 04 4 7.552e+09 3.2e+07 1 3.2e+07 ! 05 5 7.744e+09 3.2e+07 1 3.2e+07 ! 06 6 7.776e+09 3.2e+07 1 3.2e+07 ! 07 7 7.808e+09 3.2e+07 1 3.2e+07 ! 08 8 7.84e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 85 lines of history. ! ! Reading 21816 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 8 channels. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_02.dfm J1002-2837_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 60 float amp_soltime2 amp_soltime2 = 5 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.1 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_02.dvm version of 2017.12.26 === " ! === Difmap script: pima_mupet_02.dvm version of 2017.12.26 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.0318785 Jy startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 43 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 43 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 43 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 43 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 43 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 43 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 43 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 43 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.000562Jy sigma=23.889643 ! Fit after self-cal, rms=0.984816Jy sigma=23.501145 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. peakwin win_mult ! Inverting map and beam ! Estimated beam: bmin=0.8381 mas, bmaj=2.294 mas, bpa=0.4382 degrees ! Estimated noise=0.482003 mJy/beam. ! Added new window around map position (0, 0). flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0144925 Jy ! Component: 100 - total flux cleaned = 0.0157311 Jy ! Total flux subtracted in 100 components = 0.0157311 Jy ! Clean residual min=-0.001703 max=0.001557 Jy/beam ! Clean residual mean=-0.000001 rms=0.000423 Jy/beam ! Combined flux in latest and established models = 0.0157311 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0157311 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.027844Jy sigma=0.633550 ! Fit after self-cal, rms=0.027834Jy sigma=0.633270 ! Inverting map print "============== Finished uniform weighting CLEAN ==============" ! ============== Finished uniform weighting CLEAN ============== ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.117 mas, bmaj=3.108 mas, bpa=-3.61 degrees ! Estimated noise=0.202164 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000360015 Jy ! Component: 100 - total flux cleaned = -0.000447026 Jy ! Component: 150 - total flux cleaned = -0.000454927 Jy ! Component: 200 - total flux cleaned = -0.000464022 Jy ! Total flux subtracted in 200 components = -0.000464022 Jy ! Clean residual min=-0.000740 max=0.000797 Jy/beam ! Clean residual mean=0.000001 rms=0.000208 Jy/beam ! Combined flux in latest and established models = 0.0152671 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 17 components and 0.0152671 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.027830Jy sigma=0.633194 ! Fit after self-cal, rms=0.027829Jy sigma=0.633182 ! Inverting map print "============== Finished natural weighting CLEAN ==============" ! ============== Finished natural weighting CLEAN ============== ! gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.913054 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 KP 1.16 LA 1.10 ! MK 1.07 OV 1.10 PT 1.24 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 0.977745 ! Telescope amplitude corrections in sub-array 2: ! FD 0.81 KP 1.14 LA 0.92 OV 1.00 ! PT 1.22 SC 1.05 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.961886 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 KP 0.96 LA 1.14 ! MK 1.07 OV 1.02 PT 1.11 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 0.986053 ! Telescope amplitude corrections in sub-array 2: ! FD 1.03 KP 0.83 LA 0.89 OV 1.09 ! PT 1.09 SC 1.16 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.937717 ! Telescope amplitude corrections in sub-array 1: ! BR 1.18 FD 0.89 KP 0.88 LA 1.19 ! MK 0.90 OV 1.18 PT 1.25 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 0.988669 ! Telescope amplitude corrections in sub-array 2: ! FD 0.99 KP 0.87 LA 0.99 OV 1.08 ! PT 1.07 SC 1.07 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.985563 ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.00 KP 0.95 LA 1.13 ! MK 0.93 OV 0.89 PT 1.11 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 0.987259 ! Telescope amplitude corrections in sub-array 2: ! FD 0.99 KP 1.07 LA 1.02 OV 0.86 ! PT 1.15 SC 0.98 ! ! ! Correcting IF 5. ! Amplitude normalization factor in sub-array 1: 0.974065 ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 0.93 KP 0.78 LA 1.21 ! MK 0.95 OV 1.07 PT 1.11 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 1.0132 ! Telescope amplitude corrections in sub-array 2: ! FD 1.05 KP 0.83 LA 1.12 OV 0.86 ! PT 1.16 SC 0.91 ! ! ! Correcting IF 6. ! Amplitude normalization factor in sub-array 1: 0.967569 ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.08 KP 0.90 LA 1.07 ! MK 1.01 OV 0.93 PT 1.14 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 1.01703 ! Telescope amplitude corrections in sub-array 2: ! FD 1.10 KP 0.97 LA 0.76 OV 0.89 ! PT 1.04 SC 1.14 ! ! ! Correcting IF 7. ! Amplitude normalization factor in sub-array 1: 1.01649 ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.10 KP 0.86 LA 1.02 ! MK 0.99 OV 0.84 PT 1.18 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 1.02891 ! Telescope amplitude corrections in sub-array 2: ! FD 0.98 KP 0.81 LA 1.00 OV 0.93 ! PT 1.15 SC 0.96 ! ! ! Correcting IF 8. ! Amplitude normalization factor in sub-array 1: 1.01398 ! Telescope amplitude corrections in sub-array 1: ! BR 0.84 FD 0.85 KP 1.05 LA 1.14 ! MK 1.02 OV 0.85 PT 1.14 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 1.02287 ! Telescope amplitude corrections in sub-array 2: ! FD 0.89 KP 1.06 LA 0.96 OV 1.01 ! PT 0.99 SC 0.96 ! ! ! Fit before self-cal, rms=0.027829Jy sigma=0.633182 ! Fit after self-cal, rms=0.028025Jy sigma=0.631532 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.028025Jy sigma=0.631532 ! Fit after self-cal, rms=0.028025Jy sigma=0.631516 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.108 mas, bmaj=3.144 mas, bpa=-4.768 degrees ! Estimated noise=0.193171 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000478108 Jy ! Component: 100 - total flux cleaned = -0.000480324 Jy ! Component: 150 - total flux cleaned = -0.000481816 Jy ! Component: 200 - total flux cleaned = -0.000485321 Jy ! Total flux subtracted in 200 components = -0.000485321 Jy ! Clean residual min=-0.000426 max=0.000461 Jy/beam ! Clean residual mean=-0.000000 rms=0.000127 Jy/beam ! Combined flux in latest and established models = 0.0147818 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 30 components and 0.0147818 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.028021Jy sigma=0.631327 ! Fit after self-cal, rms=0.028021Jy sigma=0.631318 ! Inverting map print "============== Finished amplitude gscale SELF-CAL ==============" ! ============== Finished amplitude gscale SELF-CAL ============== ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.028021Jy sigma=0.631318 ! Fit after self-cal, rms=0.027983Jy sigma=0.630083 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 6.36687e-05 Jy ! Component: 100 - total flux cleaned = 7.0956e-05 Jy ! Component: 150 - total flux cleaned = 7.50912e-05 Jy ! Component: 200 - total flux cleaned = 7.89119e-05 Jy ! Total flux subtracted in 200 components = 7.89119e-05 Jy ! Clean residual min=-0.000417 max=0.000445 Jy/beam ! Clean residual mean=-0.000000 rms=0.000128 Jy/beam ! Combined flux in latest and established models = 0.0148607 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 36 components and 0.0148607 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.027983Jy sigma=0.630075 ! Fit after self-cal, rms=0.027981Jy sigma=0.629994 ! Inverting map print "=== Finished natural weighting clean with shorter phase_soltime " ! === Finished natural weighting clean with shorter phase_soltime ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.108 x 3.144 at -4.768 degrees (North through East) ! Clean map min=-0.00039955 max=0.015237 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "============== Finished amplitude self-cal ==============" end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8401 mas, bmaj=2.313 mas, bpa=-0.1309 degrees ! Estimated noise=0.473475 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0140047 Jy ! Component: 100 - total flux cleaned = 0.0150661 Jy ! Component: 150 - total flux cleaned = 0.0149644 Jy ! Component: 200 - total flux cleaned = 0.0148701 Jy ! Total flux subtracted in 200 components = 0.0148701 Jy ! Clean residual min=-0.001298 max=0.001231 Jy/beam ! Clean residual mean=-0.000001 rms=0.000343 Jy/beam ! Combined flux in latest and established models = 0.0148701 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.0148701 Jy ! Inverting map and beam ! Estimated beam: bmin=1.108 mas, bmaj=3.144 mas, bpa=-4.768 degrees ! Estimated noise=0.193171 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -6.25975e-05 Jy ! Component: 100 - total flux cleaned = -7.32692e-05 Jy ! Component: 150 - total flux cleaned = -7.97741e-05 Jy ! Component: 200 - total flux cleaned = -7.92665e-05 Jy ! Total flux subtracted in 200 components = -7.92665e-05 Jy ! Clean residual min=-0.000419 max=0.000468 Jy/beam ! Clean residual mean=-0.000000 rms=0.000130 Jy/beam ! Combined flux in latest and established models = 0.0147908 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 19 components and 0.0147908 Jy ! Inverting map clean ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 7.3375e-06 Jy ! Component: 100 - total flux cleaned = 1.04973e-05 Jy ! Component: 150 - total flux cleaned = 1.6117e-05 Jy ! Component: 200 - total flux cleaned = 1.86529e-05 Jy ! Total flux subtracted in 200 components = 1.86529e-05 Jy ! Clean residual min=-0.000423 max=0.000456 Jy/beam ! Clean residual mean=-0.000000 rms=0.000130 Jy/beam ! Combined flux in latest and established models = 0.0148095 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 27 components and 0.0148095 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.027981Jy sigma=0.630009 ! Fit after self-cal, rms=0.027982Jy sigma=0.630011 wmodel J1002-2837_X_map.mod ! Writing 27 model components to file: J1002-2837_X_map.mod wobs J1002-2837_X_uvs.fits ! Writing UV FITS file: J1002-2837_X_uvs.fits wwins J1002-2837_X_map.win ! wwins: Wrote 1 windows to J1002-2837_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000101568 Jy ! Component: 100 - total flux cleaned = 0.000116898 Jy ! Component: 150 - total flux cleaned = 0.000102982 Jy ! Component: 200 - total flux cleaned = 7.6281e-05 Jy ! Component: 250 - total flux cleaned = 7.61442e-05 Jy ! Component: 300 - total flux cleaned = 6.38945e-05 Jy ! Component: 350 - total flux cleaned = 6.38671e-05 Jy ! Component: 400 - total flux cleaned = 6.37112e-05 Jy ! Component: 450 - total flux cleaned = 5.25968e-05 Jy ! Component: 500 - total flux cleaned = 5.28023e-05 Jy ! Component: 550 - total flux cleaned = 6.32947e-05 Jy ! Component: 600 - total flux cleaned = 7.85505e-05 Jy ! Component: 650 - total flux cleaned = 7.35743e-05 Jy ! Component: 700 - total flux cleaned = 7.85687e-05 Jy ! Component: 750 - total flux cleaned = 9.31675e-05 Jy ! Component: 800 - total flux cleaned = 8.8537e-05 Jy ! Component: 850 - total flux cleaned = 8.86049e-05 Jy ! Component: 900 - total flux cleaned = 8.4127e-05 Jy ! Component: 950 - total flux cleaned = 7.51418e-05 Jy ! Component: 1000 - total flux cleaned = 6.64464e-05 Jy ! Component: 1050 - total flux cleaned = 5.36106e-05 Jy ! Component: 1100 - total flux cleaned = 4.94024e-05 Jy ! Component: 1150 - total flux cleaned = 2.06432e-05 Jy ! Component: 1200 - total flux cleaned = 8.56032e-06 Jy ! Component: 1250 - total flux cleaned = -1.53185e-05 Jy ! Component: 1300 - total flux cleaned = -4.26844e-05 Jy ! Component: 1350 - total flux cleaned = -6.96213e-05 Jy ! Component: 1400 - total flux cleaned = -8.84429e-05 Jy ! Component: 1450 - total flux cleaned = -9.5881e-05 Jy ! Component: 1500 - total flux cleaned = -0.000110643 Jy ! Component: 1550 - total flux cleaned = -0.000139597 Jy ! Component: 1600 - total flux cleaned = -0.000150303 Jy ! Component: 1650 - total flux cleaned = -0.000167886 Jy ! Component: 1700 - total flux cleaned = -0.000185129 Jy ! Component: 1750 - total flux cleaned = -0.000198705 Jy ! Component: 1800 - total flux cleaned = -0.000205435 Jy ! Component: 1850 - total flux cleaned = -0.000218772 Jy ! Component: 1900 - total flux cleaned = -0.000235144 Jy ! Component: 1950 - total flux cleaned = -0.000244849 Jy ! Component: 2000 - total flux cleaned = -0.00025766 Jy ! Component: 2050 - total flux cleaned = -0.000270237 Jy ! Component: 2100 - total flux cleaned = -0.00026712 Jy ! Component: 2150 - total flux cleaned = -0.000276394 Jy ! Component: 2200 - total flux cleaned = -0.000291668 Jy ! Component: 2250 - total flux cleaned = -0.000303766 Jy ! Component: 2300 - total flux cleaned = -0.000306758 Jy ! Component: 2350 - total flux cleaned = -0.00031268 Jy ! Component: 2400 - total flux cleaned = -0.000324354 Jy ! Component: 2450 - total flux cleaned = -0.000347405 Jy ! Component: 2500 - total flux cleaned = -0.00035018 Jy ! Component: 2550 - total flux cleaned = -0.000358693 Jy ! Component: 2600 - total flux cleaned = -0.000375515 Jy ! Component: 2650 - total flux cleaned = -0.000389399 Jy ! Component: 2700 - total flux cleaned = -0.000397644 Jy ! Component: 2750 - total flux cleaned = -0.000405842 Jy ! Component: 2800 - total flux cleaned = -0.000422055 Jy ! Component: 2850 - total flux cleaned = -0.000432766 Jy ! Component: 2900 - total flux cleaned = -0.000448706 Jy ! Component: 2950 - total flux cleaned = -0.000453965 Jy ! Component: 3000 - total flux cleaned = -0.000461817 Jy ! Component: 3050 - total flux cleaned = -0.000477377 Jy ! Component: 3100 - total flux cleaned = -0.000490251 Jy ! Component: 3150 - total flux cleaned = -0.000495334 Jy ! Component: 3200 - total flux cleaned = -0.000505471 Jy ! Component: 3250 - total flux cleaned = -0.000507992 Jy ! Component: 3300 - total flux cleaned = -0.000512974 Jy ! Component: 3350 - total flux cleaned = -0.000527843 Jy ! Component: 3400 - total flux cleaned = -0.000537659 Jy ! Component: 3450 - total flux cleaned = -0.000549905 Jy ! Component: 3500 - total flux cleaned = -0.000559638 Jy ! Component: 3550 - total flux cleaned = -0.000574138 Jy ! Component: 3600 - total flux cleaned = -0.00058612 Jy ! Component: 3650 - total flux cleaned = -0.000590878 Jy ! Component: 3700 - total flux cleaned = -0.000602751 Jy ! Component: 3750 - total flux cleaned = -0.000612187 Jy ! Component: 3800 - total flux cleaned = -0.000628595 Jy ! Component: 3850 - total flux cleaned = -0.000628598 Jy ! Component: 3900 - total flux cleaned = -0.000640198 Jy ! Component: 3950 - total flux cleaned = -0.000649437 Jy ! Component: 4000 - total flux cleaned = -0.000656325 Jy ! Component: 4050 - total flux cleaned = -0.000670003 Jy ! Total flux subtracted in 4096 components = -0.000676812 Jy ! Clean residual min=-0.000126 max=0.000135 Jy/beam ! Clean residual mean=0.000000 rms=0.000043 Jy/beam ! Combined flux in latest and established models = 0.0141327 Jy keep ! Adding 271 model components to the UV plane model. ! The established model now contains 298 components and 0.0141327 Jy ![Exited script file: /opt64/bin/pima_mupet_02.dfm] wmap /vlbi/vcs9/uvm//J1002-2837_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.108 x 3.144 at -4.768 degrees (North through East) ! Clean map min=-0.00032757 max=0.015353 Jy/beam ! Writing clean map to FITS file: /vlbi/vcs9/uvm//J1002-2837_X_a_map.fits wmodel /vlbi/vcs9/uvm//J1002-2837_X_a_map.mod ! Writing 298 model components to file: /vlbi/vcs9/uvm//J1002-2837_X_a_map.mod wobs /vlbi/vcs9/uvm//J1002-2837_X_a_uvs.fits ! Writing UV FITS file: /vlbi/vcs9/uvm//J1002-2837_X_a_uvs.fits wwins /vlbi/vcs9/uvm//J1002-2837_X_a_map.win ! wwins: Wrote 2 windows to /vlbi/vcs9/uvm//J1002-2837_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0153526 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 4.2624e-05 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.832903 0.832903 1.66581 3.33161 6.66322 13.3264 26.6529 53.3058 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0001 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.015 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 360.186 quit ! Quitting program ! Log file /vlbi/vcs9/uvm//J1002-2837_X_a_dfm.log closed on Tue Dec 26 22:09:24 2017