! Started logfile: /vlbi/vcs9/uvm//J0952+2828_C_a_dfm.log on Tue Dec 26 22:08:26 2017 float field_size field_size = 1024 float field_cell field_cell = 0.3000 float taper_size taper_size = 40.0 float freq freq = 4.12800 obs /vlbi/vcs9/uvm//J0952+2828_C_a_uvm.fits ! Reading UV FITS file: /vlbi/vcs9/uvm//J0952+2828_C_a_uvm.fits ! AN table 1: 180 integrations on 36 of 36 possible baselines. ! AN table 2: 89 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.884862 visibilities/baseline/integration-bin. ! Found source: J0952+2828 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 4.128e+09 3.2e+07 1 3.2e+07 ! 02 2 4.16e+09 3.2e+07 1 3.2e+07 ! 03 3 4.192e+09 3.2e+07 1 3.2e+07 ! 04 4 4.224e+09 3.2e+07 1 3.2e+07 ! 05 5 4.416e+09 3.2e+07 1 3.2e+07 ! 06 6 4.512e+09 3.2e+07 1 3.2e+07 ! 07 7 4.544e+09 3.2e+07 1 3.2e+07 ! 08 8 4.576e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 85 lines of history. ! ! Reading 68552 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 8 channels. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.3 print "taper_size =", taper_size ! taper_size = 40 ![@/opt64/bin/pima_mupet_02.dfm J0952+2828_C] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 60 float amp_soltime2 amp_soltime2 = 5 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.1 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_02.dvm version of 2017.12.26 === " ! === Difmap script: pima_mupet_02.dvm version of 2017.12.26 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.0457341 Jy startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 96 telescope corrections were flagged in sub-array 1. ! A total of 114 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 96 telescope corrections were flagged in sub-array 1. ! A total of 114 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 96 telescope corrections were flagged in sub-array 1. ! A total of 114 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 96 telescope corrections were flagged in sub-array 1. ! A total of 114 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 96 telescope corrections were flagged in sub-array 1. ! A total of 114 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 96 telescope corrections were flagged in sub-array 1. ! A total of 114 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 96 telescope corrections were flagged in sub-array 1. ! A total of 114 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 96 telescope corrections were flagged in sub-array 1. ! A total of 114 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.000570Jy sigma=31.753356 ! Fit after self-cal, rms=0.980307Jy sigma=31.074397 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. peakwin win_mult ! Inverting map and beam ! Estimated beam: bmin=1.257 mas, bmaj=3.548 mas, bpa=5.308 degrees ! Estimated noise=0.201033 mJy/beam. ! Added new window around map position (0, 0). flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0127494 Jy ! Component: 100 - total flux cleaned = 0.0176291 Jy ! Total flux subtracted in 100 components = 0.0176291 Jy ! Clean residual min=-0.002144 max=0.004282 Jy/beam ! Clean residual mean=0.000004 rms=0.000713 Jy/beam ! Combined flux in latest and established models = 0.0176291 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.0176291 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.040579Jy sigma=1.316533 ! Fit after self-cal, rms=0.040551Jy sigma=1.315541 ! Inverting map print "============== Finished uniform weighting CLEAN ==============" ! ============== Finished uniform weighting CLEAN ============== ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.736 mas, bmaj=4.371 mas, bpa=8.191 degrees ! Estimated noise=0.0851251 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0118291 Jy ! Component: 100 - total flux cleaned = 0.0178081 Jy ! Component: 150 - total flux cleaned = 0.0209663 Jy ! Component: 200 - total flux cleaned = 0.0225862 Jy ! Total flux subtracted in 200 components = 0.0225862 Jy ! Clean residual min=-0.006369 max=0.008777 Jy/beam ! Clean residual mean=0.000007 rms=0.002404 Jy/beam ! Combined flux in latest and established models = 0.0402153 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 33 components and 0.0402153 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.038588Jy sigma=1.239424 ! Fit after self-cal, rms=0.038575Jy sigma=1.238991 ! Inverting map print "============== Finished natural weighting CLEAN ==============" ! ============== Finished natural weighting CLEAN ============== ! gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.460969 ! Telescope amplitude corrections in sub-array 1: ! FD 0.89 HN 2.55 KP 0.94 LA 0.48 ! MK 2.97 NL 6.83 OV 2.48 PT 0.51 ! SC 1.88 ! ! A total of 12 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 0.631376 ! Telescope amplitude corrections in sub-array 2: ! BR 0.91 HN 1.80 KP 1.37 LA 0.45 ! MK 0.86 NL 1.78 OV 2.74 PT 0.69 ! SC 3.65 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.466246 ! Telescope amplitude corrections in sub-array 1: ! FD 0.99 HN 2.76 KP 1.17 LA 0.47 ! MK 3.55 NL 4.26 OV 3.62 PT 0.50 ! SC 1.98 ! ! A total of 12 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 0.560783 ! Telescope amplitude corrections in sub-array 2: ! BR 0.78 HN 1.52 KP 1.06 LA 0.55 ! MK 0.80 NL 6.01 OV 1.67 PT 0.63 ! SC 3.02 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.486643 ! Telescope amplitude corrections in sub-array 1: ! FD 1.01 HN 2.68 KP 1.50 LA 0.47 ! MK 3.15 NL 4.04 OV 3.40 PT 0.49 ! SC 1.76 ! ! A total of 12 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 0.697334 ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 HN 1.50 KP 1.10 LA 0.70 ! MK 1.07 NL 3.40 OV 1.53 PT 0.56 ! SC 2.08 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.407529 ! Telescope amplitude corrections in sub-array 1: ! FD 1.13 HN 2.60 KP 3.01 LA 0.43 ! MK 3.04 NL 6.84 OV 2.56 PT 0.53 ! SC 1.94 ! ! A total of 12 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 0.654747 ! Telescope amplitude corrections in sub-array 2: ! BR 1.37 HN 1.42 KP 1.22 LA 0.82 ! MK 1.48 NL 2.45 OV 2.36 PT 0.50 ! SC 2.12 ! ! ! Correcting IF 5. ! Amplitude normalization factor in sub-array 1: 0.464576 ! Telescope amplitude corrections in sub-array 1: ! FD 1.18 HN 2.47 KP 1.43 LA 0.46 ! MK 2.82 NL 4.22 OV 3.97 PT 0.59 ! SC 2.23 ! ! A total of 12 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 0.604794 ! Telescope amplitude corrections in sub-array 2: ! BR 0.60 HN 0.92 KP 0.54 LA 5.06 ! MK 2.36 NL 2.38 OV 0.98 PT 0.92 ! SC 1.12 ! ! ! Correcting IF 6. ! Amplitude normalization factor in sub-array 1: 0.518965 ! Telescope amplitude corrections in sub-array 1: ! FD 1.80 HN 2.74 KP 1.00 LA 0.57 ! MK 2.43 NL 5.26 OV 1.51 PT 0.58 ! SC 1.46 ! ! A total of 12 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 0.623346 ! Telescope amplitude corrections in sub-array 2: ! BR 1.08 HN 1.33 KP 0.51 LA 1.27 ! MK 4.11 NL 2.27 OV 1.53 PT 1.20 ! SC 1.14 ! ! ! Correcting IF 7. ! Amplitude normalization factor in sub-array 1: 0.519789 ! Telescope amplitude corrections in sub-array 1: ! FD 1.76 HN 1.87 KP 1.03 LA 0.73 ! MK 3.46 NL 4.59 OV 1.44 PT 0.56 ! SC 1.88 ! ! A total of 12 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 0.750035 ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 HN 0.97 KP 0.51 LA 1.28 ! MK 1.99 NL 2.40 OV 1.40 PT 1.20 ! SC 1.29 ! ! ! Correcting IF 8. ! Amplitude normalization factor in sub-array 1: 0.642306 ! Telescope amplitude corrections in sub-array 1: ! FD 1.28 HN 1.90 KP 0.88 LA 0.82 ! MK 2.62 NL 3.15 OV 1.15 PT 0.54 ! SC 1.68 ! ! A total of 12 telescope corrections were flagged in sub-array 2. ! Amplitude normalization factor in sub-array 2: 0.541926 ! Telescope amplitude corrections in sub-array 2: ! BR 0.69 HN 1.34 KP 0.75 LA 1.13 ! MK 3.38 NL 4.19 OV 2.85 PT 1.18 ! SC 1.11 ! ! ! Fit before self-cal, rms=0.038575Jy sigma=1.238991 ! Fit after self-cal, rms=0.039761Jy sigma=3.818238 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.039761Jy sigma=3.818238 ! Fit after self-cal, rms=0.039960Jy sigma=3.814894 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.365 mas, bmaj=7.857 mas, bpa=16.28 degrees ! Estimated noise=0.0202716 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0243547 Jy ! Component: 100 - total flux cleaned = -0.0294588 Jy ! Component: 150 - total flux cleaned = -0.0306609 Jy ! Component: 200 - total flux cleaned = -0.0307052 Jy ! Total flux subtracted in 200 components = -0.0307052 Jy ! Clean residual min=-0.000632 max=0.000899 Jy/beam ! Clean residual mean=0.000001 rms=0.000274 Jy/beam ! Combined flux in latest and established models = 0.00951008 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 46 components and 0.00951008 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.037459Jy sigma=1.045707 ! Fit after self-cal, rms=0.037431Jy sigma=1.044411 ! Inverting map print "============== Finished amplitude gscale SELF-CAL ==============" ! ============== Finished amplitude gscale SELF-CAL ============== ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.037431Jy sigma=1.044411 ! Fit after self-cal, rms=0.037428Jy sigma=1.035899 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -5.19364e-05 Jy ! Component: 100 - total flux cleaned = -8.08252e-05 Jy ! Component: 150 - total flux cleaned = -0.000106818 Jy ! Component: 200 - total flux cleaned = -0.000129662 Jy ! Total flux subtracted in 200 components = -0.000129662 Jy ! Clean residual min=-0.000606 max=0.000860 Jy/beam ! Clean residual mean=0.000001 rms=0.000244 Jy/beam ! Combined flux in latest and established models = 0.00938042 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 48 components and 0.00938042 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.037363Jy sigma=1.031929 ! Fit after self-cal, rms=0.037350Jy sigma=1.030882 ! Inverting map print "=== Finished natural weighting clean with shorter phase_soltime " ! === Finished natural weighting clean with shorter phase_soltime ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.365 x 7.857 at 16.28 degrees (North through East) ! Clean map min=-0.00064174 max=0.0065945 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "============== Finished amplitude self-cal ==============" end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.446 mas, bmaj=3.798 mas, bpa=8.556 degrees ! Estimated noise=0.10462 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00578996 Jy ! Component: 100 - total flux cleaned = 0.00814515 Jy ! Component: 150 - total flux cleaned = 0.00951749 Jy ! Component: 200 - total flux cleaned = 0.010364 Jy ! Total flux subtracted in 200 components = 0.010364 Jy ! Clean residual min=-0.000965 max=0.001294 Jy/beam ! Clean residual mean=-0.000002 rms=0.000263 Jy/beam ! Combined flux in latest and established models = 0.010364 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.010364 Jy ! Inverting map and beam ! Estimated beam: bmin=3.365 mas, bmaj=7.857 mas, bpa=16.28 degrees ! Estimated noise=0.0202716 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00119895 Jy ! Component: 100 - total flux cleaned = -0.00135412 Jy ! Component: 150 - total flux cleaned = -0.00135726 Jy ! Component: 200 - total flux cleaned = -0.00135755 Jy ! Total flux subtracted in 200 components = -0.00135755 Jy ! Clean residual min=-0.000569 max=0.000675 Jy/beam ! Clean residual mean=-0.000001 rms=0.000191 Jy/beam ! Combined flux in latest and established models = 0.00900644 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 33 components and 0.00900644 Jy ! Inverting map clean ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -2.06815e-06 Jy ! Component: 100 - total flux cleaned = -3.6786e-06 Jy ! Component: 150 - total flux cleaned = -5.21382e-06 Jy ! Component: 200 - total flux cleaned = -5.36142e-06 Jy ! Total flux subtracted in 200 components = -5.36142e-06 Jy ! Clean residual min=-0.000570 max=0.000672 Jy/beam ! Clean residual mean=-0.000001 rms=0.000191 Jy/beam ! Combined flux in latest and established models = 0.00900108 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 36 components and 0.00900108 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.037170Jy sigma=1.023527 ! Fit after self-cal, rms=0.037153Jy sigma=1.022069 wmodel J0952+2828_C_map.mod ! Writing 36 model components to file: J0952+2828_C_map.mod wobs J0952+2828_C_uvs.fits ! Writing UV FITS file: J0952+2828_C_uvs.fits wwins J0952+2828_C_map.win ! wwins: Wrote 1 windows to J0952+2828_C_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000131295 Jy ! Component: 100 - total flux cleaned = 0.00013925 Jy ! Component: 150 - total flux cleaned = 0.000197344 Jy ! Component: 200 - total flux cleaned = 0.000197342 Jy ! Component: 250 - total flux cleaned = 0.000151934 Jy ! Component: 300 - total flux cleaned = 7.01087e-05 Jy ! Component: 350 - total flux cleaned = -1.74675e-05 Jy ! Component: 400 - total flux cleaned = -0.000103694 Jy ! Component: 450 - total flux cleaned = -0.0001888 Jy ! Component: 500 - total flux cleaned = -0.000279759 Jy ! Component: 550 - total flux cleaned = -0.000369743 Jy ! Component: 600 - total flux cleaned = -0.000458906 Jy ! Component: 650 - total flux cleaned = -0.000547298 Jy ! Component: 700 - total flux cleaned = -0.000621466 Jy ! Component: 750 - total flux cleaned = -0.000708427 Jy ! Component: 800 - total flux cleaned = -0.000781522 Jy ! Component: 850 - total flux cleaned = -0.000854239 Jy ! Component: 900 - total flux cleaned = -0.000926776 Jy ! Component: 950 - total flux cleaned = -0.00099908 Jy ! Component: 1000 - total flux cleaned = -0.00107131 Jy ! Component: 1050 - total flux cleaned = -0.00115043 Jy ! Component: 1100 - total flux cleaned = -0.00121701 Jy ! Component: 1150 - total flux cleaned = -0.00128424 Jy ! Component: 1200 - total flux cleaned = -0.00135234 Jy ! Component: 1250 - total flux cleaned = -0.0014282 Jy ! Component: 1300 - total flux cleaned = -0.00150529 Jy ! Component: 1350 - total flux cleaned = -0.00156935 Jy ! Component: 1400 - total flux cleaned = -0.00164151 Jy ! Component: 1450 - total flux cleaned = -0.00172959 Jy ! Component: 1500 - total flux cleaned = -0.00181188 Jy ! Component: 1550 - total flux cleaned = -0.00191109 Jy ! Component: 1600 - total flux cleaned = -0.00200475 Jy ! Component: 1650 - total flux cleaned = -0.00210061 Jy ! Component: 1700 - total flux cleaned = -0.00219872 Jy ! Component: 1750 - total flux cleaned = -0.00230775 Jy ! Component: 1800 - total flux cleaned = -0.00240223 Jy ! Component: 1850 - total flux cleaned = -0.00252562 Jy ! Component: 1900 - total flux cleaned = -0.00263422 Jy ! Component: 1950 - total flux cleaned = -0.00276453 Jy ! Component: 2000 - total flux cleaned = -0.00290846 Jy ! Component: 2050 - total flux cleaned = -0.00307664 Jy ! Component: 2100 - total flux cleaned = -0.00325047 Jy ! Component: 2150 - total flux cleaned = -0.00340903 Jy ! Component: 2200 - total flux cleaned = -0.00355129 Jy ! Component: 2250 - total flux cleaned = -0.00372144 Jy ! Component: 2300 - total flux cleaned = -0.00390957 Jy ! Component: 2350 - total flux cleaned = -0.00410472 Jy ! Component: 2400 - total flux cleaned = -0.00430749 Jy ! Component: 2450 - total flux cleaned = -0.00449124 Jy ! Component: 2500 - total flux cleaned = -0.00468196 Jy ! Component: 2550 - total flux cleaned = -0.00486601 Jy ! Component: 2600 - total flux cleaned = -0.00507228 Jy ! Component: 2650 - total flux cleaned = -0.00527236 Jy ! Component: 2700 - total flux cleaned = -0.00546463 Jy ! Component: 2750 - total flux cleaned = -0.00566452 Jy ! Component: 2800 - total flux cleaned = -0.00587299 Jy ! Component: 2850 - total flux cleaned = -0.00612699 Jy ! Component: 2900 - total flux cleaned = -0.00633518 Jy ! Component: 2950 - total flux cleaned = -0.00661164 Jy ! Component: 3000 - total flux cleaned = -0.00683797 Jy ! Component: 3050 - total flux cleaned = -0.0070736 Jy ! Component: 3100 - total flux cleaned = -0.00729708 Jy ! Component: 3150 - total flux cleaned = -0.00753144 Jy ! Component: 3200 - total flux cleaned = -0.00775176 Jy ! Component: 3250 - total flux cleaned = -0.00798154 Jy ! Component: 3300 - total flux cleaned = -0.00819592 Jy ! Component: 3350 - total flux cleaned = -0.00833655 Jy ! Component: 3400 - total flux cleaned = -0.00848198 Jy ! Component: 3450 - total flux cleaned = -0.00860414 Jy ! Component: 3500 - total flux cleaned = -0.00866862 Jy ! Component: 3550 - total flux cleaned = -0.00873494 Jy ! Component: 3600 - total flux cleaned = -0.00873362 Jy ! Component: 3650 - total flux cleaned = -0.00884265 Jy ! Component: 3700 - total flux cleaned = -0.00891967 Jy ! Component: 3750 - total flux cleaned = -0.00891984 Jy ! Component: 3800 - total flux cleaned = -0.00900345 Jy ! Component: 3850 - total flux cleaned = -0.00895908 Jy ! Component: 3900 - total flux cleaned = -0.00914165 Jy ! Component: 3950 - total flux cleaned = -0.00909365 Jy ! Component: 4000 - total flux cleaned = -0.00914311 Jy ! Component: 4050 - total flux cleaned = -0.00908754 Jy ! Total flux subtracted in 4096 components = -0.00914015 Jy ! Clean residual min=-0.003036 max=0.003013 Jy/beam ! Clean residual mean=-0.000056 rms=0.001359 Jy/beam ! Combined flux in latest and established models = -0.000139081 Jy keep ! Adding 524 model components to the UV plane model. ! The established model now contains 560 components and -0.000139077 Jy ![Exited script file: /opt64/bin/pima_mupet_02.dfm] wmap /vlbi/vcs9/uvm//J0952+2828_C_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.365 x 7.857 at 16.28 degrees (North through East) ! Clean map min=-0.002506 max=0.0056967 Jy/beam ! Writing clean map to FITS file: /vlbi/vcs9/uvm//J0952+2828_C_a_map.fits wmodel /vlbi/vcs9/uvm//J0952+2828_C_a_map.mod ! Writing 560 model components to file: /vlbi/vcs9/uvm//J0952+2828_C_a_map.mod wobs /vlbi/vcs9/uvm//J0952+2828_C_a_uvs.fits ! Writing UV FITS file: /vlbi/vcs9/uvm//J0952+2828_C_a_uvs.fits wwins /vlbi/vcs9/uvm//J0952+2828_C_a_map.win ! wwins: Wrote 2 windows to /vlbi/vcs9/uvm//J0952+2828_C_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.00569674 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00158616 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -83.5297 83.5297 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0047 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.005 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 3.591 quit ! Quitting program ! Log file /vlbi/vcs9/uvm//J0952+2828_C_a_dfm.log closed on Tue Dec 26 22:08:31 2017