! Started logfile: /vlbi/vcs9/uvm//J0949+6614_C_a_dfm.log on Tue Dec 26 22:08:09 2017
float field_size
field_size =  1024
float field_cell
field_cell =   0.3000
float taper_size
taper_size =   40.0
float freq
freq       =    4.12800
obs     /vlbi/vcs9/uvm//J0949+6614_C_a_uvm.fits
! Reading UV FITS file: /vlbi/vcs9/uvm//J0949+6614_C_a_uvm.fits
! AN table 1: 58 integrations on 21 of 21 possible baselines.
! AN table 2: 58 integrations on 6 of 6 possible baselines.
! Apparent sampling: 0.959132 visibilities/baseline/integration-bin.
! Found source: J0949+6614
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 94 lines of history.
! 
! Reading 12016 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/opt64/bin/pima_mupet_02.dfm J0949+6614_C]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 60
float amp_soltime2
amp_soltime2 = 5
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.1
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_02.dvm version of 2017.12.26 === "
! === Difmap script: pima_mupet_02.dvm version of 2017.12.26 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.0530455 Jy 
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  A total of 4 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  A total of 4 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  A total of 4 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  A total of 4 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 5.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  A total of 4 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 6.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  A total of 4 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 7.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  A total of 4 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 8.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  A total of 4 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.004160Jy  sigma=33.195964
! Fit after  self-cal, rms=0.977220Jy  sigma=32.241174
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
peakwin win_mult
! Inverting map and beam 
! Estimated beam: bmin=2.228 mas, bmaj=10.17 mas, bpa=-47.09 degrees
! Estimated noise=0.43441 mJy/beam.
! Added new window around map position (-0.3, 0.3).
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0140326 Jy
! Component: 100  -  total flux cleaned = 0.0226055 Jy
! Total flux subtracted in 100 components = 0.0226055 Jy
! Clean residual min=-0.004684 max=0.004404 Jy/beam
! Clean residual mean=-0.000145 rms=0.001821 Jy/beam
! Combined flux in latest and established models = 0.0226055 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 71 model components to the UV plane model.
! The established model now contains 71 components and 0.0226055 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.046085Jy  sigma=1.630750
! Fit after  self-cal, rms=0.046069Jy  sigma=1.630041
! Inverting map 
print "============== Finished uniform weighting CLEAN =============="
! ============== Finished uniform weighting CLEAN ============== 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.989 mas, bmaj=10.84 mas, bpa=-46.87 degrees
! Estimated noise=0.195385 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0211498 Jy
! Component: 100  -  total flux cleaned = 0.0365122 Jy
! Component: 150  -  total flux cleaned = 0.0481111 Jy
! Component: 200  -  total flux cleaned = 0.0568824 Jy
! Total flux subtracted in 200 components = 0.0568824 Jy
! Clean residual min=-0.008552 max=0.011359 Jy/beam
! Clean residual mean=-0.000305 rms=0.004134 Jy/beam
! Combined flux in latest and established models = 0.0794879 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 94 model components to the UV plane model.
! The established model now contains 165 components and 0.0794879 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.038463Jy  sigma=1.300367
! Fit after  self-cal, rms=0.038444Jy  sigma=1.299322
! Inverting map 
print "============== Finished natural weighting CLEAN =============="
! ============== Finished natural weighting CLEAN ============== 
! 
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.797612
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.59     HN        1.04     KP        1.34     LA        0.99     
!   NL        1.37     OV        1.76     PT        0.69     
! 
!  Amplitude normalization factor in sub-array 2: 0.536272
!  Telescope amplitude corrections in sub-array 2:
!   FD        3.59     KP        2.27     LA        0.64     PT        0.97     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.768534
!  Telescope amplitude corrections in sub-array 1:
!   FD        2.18     HN        0.85     KP        1.47     LA        1.09     
!   NL        1.27     OV        1.58     PT        0.67     
! 
!  Amplitude normalization factor in sub-array 2: 0.528114
!  Telescope amplitude corrections in sub-array 2:
!   FD        3.73     KP        2.06     LA        0.49     PT        1.29     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.713154
!  Telescope amplitude corrections in sub-array 1:
!   FD        2.56     HN        0.89     KP        1.91     LA        0.89     
!   NL        1.32     OV        1.57     PT        0.68     
! 
!  Amplitude normalization factor in sub-array 2: 0.545317
!  Telescope amplitude corrections in sub-array 2:
!   FD        3.69     KP        2.09     LA        0.60     PT        0.96     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.470624
!  Telescope amplitude corrections in sub-array 1:
!   FD        3.33     HN        1.62     KP        2.50     LA        1.18     
!   NL        3.62     OV        2.13     PT        0.48     
! 
!  Amplitude normalization factor in sub-array 2: 0.423336
!  Telescope amplitude corrections in sub-array 2:
!   FD        5.74     KP        2.30     LA        0.58     PT        0.82     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.525789
!  Telescope amplitude corrections in sub-array 1:
!   FD        4.18     HN        1.31     KP        3.02     LA        0.98     
!   NL        1.64     OV        1.51     PT        0.67     
! 
!  Amplitude normalization factor in sub-array 2: 0.477534
!  Telescope amplitude corrections in sub-array 2:
!   FD        5.10     KP        2.16     LA        0.54     PT        0.57     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.759987
!  Telescope amplitude corrections in sub-array 1:
!   FD        2.32     HN        1.16     KP        1.84     LA        1.00     
!   NL        1.41     OV        0.75     PT        0.75     
! 
!  Amplitude normalization factor in sub-array 2: 0.567853
!  Telescope amplitude corrections in sub-array 2:
!   FD        3.54     KP        2.35     LA        0.62     PT        0.54     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.606099
!  Telescope amplitude corrections in sub-array 1:
!   FD        3.79     HN        1.48     KP        1.66     LA        1.09     
!   NL        1.81     OV        1.08     PT        0.64     
! 
!  Amplitude normalization factor in sub-array 2: 0.524785
!  Telescope amplitude corrections in sub-array 2:
!   FD        4.20     KP        2.24     LA        0.57     PT        0.61     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.727479
!  Telescope amplitude corrections in sub-array 1:
!   FD        2.91     HN        0.97     KP        1.86     LA        0.85     
!   NL        1.43     OV        0.86     PT        0.74     
! 
!  Amplitude normalization factor in sub-array 2: 0.610321
!  Telescope amplitude corrections in sub-array 2:
!   FD        3.00     KP        2.30     LA        0.58     PT        0.66     
! 
! 
! Fit before self-cal, rms=0.038444Jy  sigma=1.299322
! Fit after  self-cal, rms=0.038169Jy  sigma=4.239408
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.038169Jy  sigma=4.239408
! Fit after  self-cal, rms=0.038222Jy  sigma=4.238893
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.428 mas, bmaj=17.87 mas, bpa=-45.91 degrees
! Estimated noise=0.0709232 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.040639 Jy
! Component: 100  -  total flux cleaned = -0.0515625 Jy
! Component: 150  -  total flux cleaned = -0.0549162 Jy
! Component: 200  -  total flux cleaned = -0.0557524 Jy
! Total flux subtracted in 200 components = -0.0557524 Jy
! Clean residual min=-0.001610 max=0.001978 Jy/beam
! Clean residual mean=0.000097 rms=0.000784 Jy/beam
! Combined flux in latest and established models = 0.0237355 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 106 model components to the UV plane model.
! The established model now contains 239 components and 0.0237355 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.034733Jy  sigma=1.041027
! Fit after  self-cal, rms=0.032118Jy  sigma=1.035840
! Inverting map 
print "============== Finished amplitude gscale SELF-CAL =============="
! ============== Finished amplitude gscale SELF-CAL ============== 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032118Jy  sigma=1.035840
! Fit after  self-cal, rms=0.032066Jy  sigma=1.031185
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000361802 Jy
! Component: 100  -  total flux cleaned = -0.000425445 Jy
! Component: 150  -  total flux cleaned = -0.000462643 Jy
! Component: 200  -  total flux cleaned = -0.000509804 Jy
! Total flux subtracted in 200 components = -0.000509804 Jy
! Clean residual min=-0.001464 max=0.001633 Jy/beam
! Clean residual mean=0.000083 rms=0.000668 Jy/beam
! Combined flux in latest and established models = 0.0232257 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 32 model components to the UV plane model.
! The established model now contains 252 components and 0.0232257 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031980Jy  sigma=1.026521
! Fit after  self-cal, rms=0.032008Jy  sigma=1.024868
! Inverting map 
print "=== Finished natural weighting clean with shorter phase_soltime "
! === Finished natural weighting clean with shorter phase_soltime  
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.428 x 17.87 at -45.91 degrees (North through East)
! Clean map  min=-0.0014399  max=0.0070675 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "============== Finished amplitude self-cal =============="
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.239 mas, bmaj=11.66 mas, bpa=-46.27 degrees
! Estimated noise=0.276533 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00773511 Jy
! Component: 100  -  total flux cleaned = 0.0120884 Jy
! Component: 150  -  total flux cleaned = 0.0151966 Jy
! Component: 200  -  total flux cleaned = 0.0175029 Jy
! Total flux subtracted in 200 components = 0.0175029 Jy
! Clean residual min=-0.001564 max=0.001650 Jy/beam
! Clean residual mean=-0.000020 rms=0.000543 Jy/beam
! Combined flux in latest and established models = 0.0175029 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 86 model components to the UV plane model.
! The established model now contains 86 components and 0.0175029 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.428 mas, bmaj=17.87 mas, bpa=-45.91 degrees
! Estimated noise=0.0709232 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00311888 Jy
! Component: 100  -  total flux cleaned = 0.00396344 Jy
! Component: 150  -  total flux cleaned = 0.00420378 Jy
! Component: 200  -  total flux cleaned = 0.00421591 Jy
! Total flux subtracted in 200 components = 0.00421591 Jy
! Clean residual min=-0.001250 max=0.001194 Jy/beam
! Clean residual mean=0.000056 rms=0.000461 Jy/beam
! Combined flux in latest and established models = 0.0217188 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 111 components and 0.0217188 Jy
! Inverting map 
clean
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 1.6616e-05 Jy
! Component: 100  -  total flux cleaned = 2.18982e-05 Jy
! Component: 150  -  total flux cleaned = 3.17104e-05 Jy
! Component: 200  -  total flux cleaned = 3.63813e-05 Jy
! Total flux subtracted in 200 components = 3.63813e-05 Jy
! Clean residual min=-0.001248 max=0.001170 Jy/beam
! Clean residual mean=0.000056 rms=0.000462 Jy/beam
! Combined flux in latest and established models = 0.0217552 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 10 model components to the UV plane model.
! The established model now contains 114 components and 0.0217552 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032108Jy  sigma=1.011784
! Fit after  self-cal, rms=0.032034Jy  sigma=0.997223
wmodel J0949+6614_C_map.mod
! Writing 114 model components to file: J0949+6614_C_map.mod
wobs   J0949+6614_C_uvs.fits
! Writing UV FITS file: J0949+6614_C_uvs.fits
wwins  J0949+6614_C_map.win
! wwins: Wrote 1 windows to J0949+6614_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000475432 Jy
! Component: 100  -  total flux cleaned = 0.000860319 Jy
! Component: 150  -  total flux cleaned = 0.00120093 Jy
! Component: 200  -  total flux cleaned = 0.00139733 Jy
! Component: 250  -  total flux cleaned = 0.00136663 Jy
! Component: 300  -  total flux cleaned = 0.00111513 Jy
! Component: 350  -  total flux cleaned = 0.00086661 Jy
! Component: 400  -  total flux cleaned = 0.000612351 Jy
! Component: 450  -  total flux cleaned = 0.000360668 Jy
! Component: 500  -  total flux cleaned = 8.80012e-05 Jy
! Component: 550  -  total flux cleaned = -0.000170206 Jy
! Component: 600  -  total flux cleaned = -0.000374355 Jy
! Component: 650  -  total flux cleaned = -0.000510145 Jy
! Component: 700  -  total flux cleaned = -0.00058139 Jy
! Component: 750  -  total flux cleaned = -0.000658657 Jy
! Component: 800  -  total flux cleaned = -0.000725942 Jy
! Component: 850  -  total flux cleaned = -0.000780293 Jy
! Component: 900  -  total flux cleaned = -0.000837409 Jy
! Component: 950  -  total flux cleaned = -0.0009193 Jy
! Component: 1000  -  total flux cleaned = -0.000984882 Jy
! Component: 1050  -  total flux cleaned = -0.00107995 Jy
! Component: 1100  -  total flux cleaned = -0.00115706 Jy
! Component: 1150  -  total flux cleaned = -0.0012951 Jy
! Component: 1200  -  total flux cleaned = -0.00147498 Jy
! Component: 1250  -  total flux cleaned = -0.00163532 Jy
! Component: 1300  -  total flux cleaned = -0.00191117 Jy
! Component: 1350  -  total flux cleaned = -0.00213451 Jy
! Component: 1400  -  total flux cleaned = -0.00233644 Jy
! Component: 1450  -  total flux cleaned = -0.00246851 Jy
! Component: 1500  -  total flux cleaned = -0.00265882 Jy
! Component: 1550  -  total flux cleaned = -0.00281396 Jy
! Component: 1600  -  total flux cleaned = -0.00303747 Jy
! Component: 1650  -  total flux cleaned = -0.00321897 Jy
! Component: 1700  -  total flux cleaned = -0.00348146 Jy
! Component: 1750  -  total flux cleaned = -0.00369496 Jy
! Component: 1800  -  total flux cleaned = -0.00415808 Jy
! Component: 1850  -  total flux cleaned = -0.00457689 Jy
! Component: 1900  -  total flux cleaned = -0.00566694 Jy
! Component: 1950  -  total flux cleaned = -0.00684585 Jy
! Component: 2000  -  total flux cleaned = -0.00844231 Jy
! Component: 2050  -  total flux cleaned = -0.0104226 Jy
! Component: 2100  -  total flux cleaned = -0.012577 Jy
! Component: 2150  -  total flux cleaned = -0.0157511 Jy
! Component: 2200  -  total flux cleaned = -0.0190594 Jy
! Component: 2250  -  total flux cleaned = -0.0229908 Jy
! Component: 2300  -  total flux cleaned = -0.0274474 Jy
! Component: 2350  -  total flux cleaned = -0.0323059 Jy
! Component: 2400  -  total flux cleaned = -0.0376062 Jy
! Component: 2450  -  total flux cleaned = -0.043389 Jy
! Component: 2500  -  total flux cleaned = -0.0496993 Jy
! Component: 2550  -  total flux cleaned = -0.0565864 Jy
! Component: 2600  -  total flux cleaned = -0.0641034 Jy
! Component: 2650  -  total flux cleaned = -0.0723081 Jy
! Component: 2700  -  total flux cleaned = -0.081263 Jy
! Component: 2750  -  total flux cleaned = -0.091038 Jy
! Component: 2800  -  total flux cleaned = -0.101707 Jy
! Component: 2850  -  total flux cleaned = -0.113354 Jy
! Component: 2900  -  total flux cleaned = -0.126066 Jy
! Component: 2950  -  total flux cleaned = -0.139942 Jy
! Component: 3000  -  total flux cleaned = -0.155089 Jy
! Component: 3050  -  total flux cleaned = -0.171623 Jy
! Component: 3100  -  total flux cleaned = -0.189671 Jy
! Component: 3150  -  total flux cleaned = -0.209373 Jy
! Component: 3200  -  total flux cleaned = -0.230881 Jy
! Component: 3250  -  total flux cleaned = -0.254359 Jy
! Component: 3300  -  total flux cleaned = -0.279985 Jy
! Component: 3350  -  total flux cleaned = -0.307961 Jy
! Component: 3400  -  total flux cleaned = -0.3385 Jy
! Component: 3450  -  total flux cleaned = -0.371837 Jy
! Component: 3500  -  total flux cleaned = -0.408229 Jy
! Component: 3550  -  total flux cleaned = -0.447952 Jy
! Component: 3600  -  total flux cleaned = -0.491318 Jy
! Component: 3650  -  total flux cleaned = -0.538656 Jy
! Component: 3700  -  total flux cleaned = -0.590327 Jy
! Component: 3750  -  total flux cleaned = -0.646731 Jy
! Component: 3800  -  total flux cleaned = -0.70831 Jy
! Component: 3850  -  total flux cleaned = -0.775528 Jy
! Component: 3900  -  total flux cleaned = -0.848903 Jy
! Component: 3950  -  total flux cleaned = -0.928995 Jy
! Component: 4000  -  total flux cleaned = -1.01643 Jy
! Component: 4050  -  total flux cleaned = -1.11188 Jy
! Total flux subtracted in 4096 components = -1.20739 Jy
! Clean residual min=-0.235533 max=0.221271 Jy/beam
! Clean residual mean=0.000130 rms=0.074552 Jy/beam
! Combined flux in latest and established models = -1.18564 Jy
keep
! Adding 204 model components to the UV plane model.
! The established model now contains 317 components and -1.18564 Jy
![Exited script file: /opt64/bin/pima_mupet_02.dfm]
wmap   /vlbi/vcs9/uvm//J0949+6614_C_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.428 x 17.87 at -45.91 degrees (North through East)
! Clean map  min=-0.21227  max=0.13345 Jy/beam
! Writing clean map to FITS file: /vlbi/vcs9/uvm//J0949+6614_C_a_map.fits
wmodel /vlbi/vcs9/uvm//J0949+6614_C_a_map.mod
! Writing 317 model components to file: /vlbi/vcs9/uvm//J0949+6614_C_a_map.mod
wobs   /vlbi/vcs9/uvm//J0949+6614_C_a_uvs.fits
! Writing UV FITS file: /vlbi/vcs9/uvm//J0949+6614_C_a_uvs.fits
wwins  /vlbi/vcs9/uvm//J0949+6614_C_a_map.win
! wwins: Wrote 2 windows to /vlbi/vcs9/uvm//J0949+6614_C_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.133452 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.0692281 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -100 100
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.2076 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.133 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1.927 
quit
! Quitting program
! Log file /vlbi/vcs9/uvm//J0949+6614_C_a_dfm.log closed on Tue Dec 26 22:08:12 2017